Convert the tas2770 binding to yaml format. Add in the reset-gpio to the binding as it is in the code but not documented in the binding.

Signed-off-by: Dan Murphy dmurphy@ti.com --- .../devicetree/bindings/sound/tas2770.txt | 37 --------- .../devicetree/bindings/sound/tas2770.yaml | 76 +++++++++++++++++++ 2 files changed, 76 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml

diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt deleted file mode 100644 index ede6bb3d9637..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2770.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2770 Smart PA - -The TAS2770 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - - compatible: - Should contain "ti,tas2770". - - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. - -Optional properties: - -- interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. -- interrupts: interrupt specification for data-ready. - -Examples: - - tas2770@4c { - compatible = "ti,tas2770"; - reg = <0x4c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&msm_gpio>; - interrupts = <97 0>; - ti,asi-format = <0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml new file mode 100644 index 000000000000..8c667fd37a57 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019-20 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2770 Smart PA + +maintainers: + - Shi Fu shifu0704@thundersoft.com + +description: | + The TAS2770 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2770 + + reg: + maxItems: 1 + description: | + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpio: + description: GPIO used to reset the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + ti,asi-format: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sets TDM RX capture edge. + enum: + - 0 # Rising edge + - 1 # Falling edge + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpio = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; +