Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../devicetree/bindings/sound/cirrus,cs35l45.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 2ab74f995685..4c9acb8d4c4c 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -62,7 +62,7 @@ patternProperties: GPIO pin direction. Valid only when 'gpio-ctrl' is 1 0 = Output 1 = Input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 1 @@ -71,7 +71,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = Low 1 = High - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -80,7 +80,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = CMOS 1 = Open Drain - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -90,7 +90,7 @@ patternProperties: and 'gpio-dir' is 0 0 = Non-inverted, Active High 1 = Inverted, Active Low - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -114,7 +114,7 @@ patternProperties: 0 = High impedance input 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 2-7 = Reserved - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 default: 0