According to the WM8962 datasheet, there is no register at address 0x200.

WM8962_GPIO_BASE is just a base address for the GPIO registers and not a real register, so remove it from wm8962_readable_register().

Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip its access.

This fixes the following errors:

wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16

Signed-off-by: Fabio Estevam festevam@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com --- sound/soc/codecs/wm8962.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index df8cdc71357d..8159a3866cde 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -956,7 +956,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg) case WM8962_EQ39: case WM8962_EQ40: case WM8962_EQ41: - case WM8962_GPIO_BASE: case WM8962_GPIO_2: case WM8962_GPIO_3: case WM8962_GPIO_5: @@ -3437,7 +3436,13 @@ static int wm8962_probe(struct snd_soc_component *component) /* Save boards having to disable DMIC when not in use */ dmicclk = false; dmicdat = false; - for (i = 0; i < WM8962_MAX_GPIO; i++) { + for (i = 1; i < WM8962_MAX_GPIO; i++) { + /* + * Register 515 (WM8962_GPIO_BASE + 3) does not exist, + * so skip its access + */ + if (i == 3) + continue; switch (snd_soc_component_read(component, WM8962_GPIO_BASE + i) & WM8962_GP2_FN_MASK) { case WM8962_GPIO_FN_DMICCLK: