[alsa-devel] [PATCH v5 1/2] mfd: Add DT bindings documentation for Samsung Exynos LPASS
This patch adds documentation of the DT bindings for the Samsung Exynos SoC Low Power Audio Subsystem.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Acked-by: Rob Herring robh@kernel.org ---
Changes since v4: - text reformatting, added VIC to the list of sub-devices, relative paths used for the reference DT binding documentation files, added example dts.
Changes since v3: - moved to Documentation/devicetree/bindings/mfd, - added #address-cells, #size-cells, ranges as required properties, - added description of the IP block subnodes and links to their binding's documentation.
Changes since v2: - none. --- .../bindings/mfd/samsung,exynos5433-lpass.txt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt new file mode 100644 index 0000000..c110e11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt @@ -0,0 +1,70 @@ +Samsung Exynos SoC Low Power Audio Subsystem (LPASS) + +Required properties: + + - compatible : "samsung,exynos5433-lpass" + - reg : should contain the LPASS top SFR region location + and size + - samsung,pmu-syscon : the phandle to the Power Management Unit node + - #address-cells : should be 1 + - #size-cells : should be 1 + - ranges : must be present + +Each IP block of the Low Power Audio Subsystem should be specified as +an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: +UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. + +Bindings of the sub-nodes are described in: + ../serial/samsung_uart.txt + ../sound/samsung-i2s.txt + ../dma/arm-pl330.txt + + +Example: + +audio-subsystem { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + samsung,pmu-syscon = <&pmu_system_controller>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + adma: adma@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <0 73 0>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + i2s0: i2s0@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0 &adma 2>; + dma-names = "tx", "rx"; + interrupts = <0 70 0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + + serial_3: serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <0 67 0>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + status = "disabled"; + }; + }; -- 1.9.1
This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle.
Signed-off-by: Inha Song ideal.song@samsung.com Signed-off-by: Beomho Seo beomho.seo@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com ---
Changes since v4: - none.
Changes since v3: - moved from sound/soc/samsung and rewritten as a MFD driver, - PMU register definitions moved to include/linux/mfd/syscon/exynos5-pmu.h, - added regmap for LPASS Top SFR region, - cleaned up register bit field defintions.
Changes since v2: - move misplaced SND_SAMSUNG_AUDSS Kconfig symbol addition to this patch. --- drivers/mfd/Kconfig | 8 ++ drivers/mfd/Makefile | 1 + drivers/mfd/exynos-lpass.c | 185 +++++++++++++++++++++++++++++++++ include/linux/mfd/syscon/exynos5-pmu.h | 4 +- 4 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/exynos-lpass.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..a7ec890 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -281,6 +281,14 @@ config MFD_DLN2 etc. must be enabled in order to use the functionality of the device.
+config MFD_EXYNOS_LPASS + tristate "Samsung Exynos SoC Low Power Audio Subsystem" + select MFD_CORE + select REGMAP_MMIO + help + Select this option to enable support for Samsung Exynos Low Power + Audio Subsystem. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..41510bb 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o +obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c new file mode 100644 index 0000000..956ce1f --- /dev/null +++ b/drivers/mfd/exynos-lpass.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd. + * + * Authors: Inha Song ideal.song@samsung.com + * Sylwester Nawrocki s.nawrocki@samsung.com + * + * Samsung Exynos SoC series Low Power Audio Subsystem driver. + * + * This module provides regmap for the Top SFR region and instantiates + * devices for IP blocks like DMAC, I2S, UART. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +/* LPASS Top register definitions */ +#define SFR_LPASS_CORE_SW_RESET (0x08) +#define LPASS_SB_SW_RESET (1 << 11) +#define LPASS_UART_SW_RESET (1 << 10) +#define LPASS_PCM_SW_RESET (1 << 9) +#define LPASS_I2S_SW_RESET (1 << 8) +#define LPASS_WDT1_SW_RESET (1 << 4) +#define LPASS_WDT0_SW_RESET (1 << 3) +#define LPASS_TIMER_SW_RESET (1 << 2) +#define LPASS_MEM_SW_RESET (1 << 1) +#define LPASS_DMA_SW_RESET (1 << 0) + +#define SFR_LPASS_INTR_CA5_MASK (0x48) +#define SFR_LPASS_INTR_CPU_MASK (0x58) +#define LPASS_INTR_APM (1 << 9) +#define LPASS_INTR_MIF (1 << 8) +#define LPASS_INTR_TIMER (1 << 7) +#define LPASS_INTR_DMA (1 << 6) +#define LPASS_INTR_GPIO (1 << 5) +#define LPASS_INTR_I2S (1 << 4) +#define LPASS_INTR_PCM (1 << 3) +#define LPASS_INTR_SLIMBUS (1 << 2) +#define LPASS_INTR_UART (1 << 1) +#define LPASS_INTR_SFR (1 << 0) + +struct exynos_lpass { + struct regmap *pmu; + struct regmap *top; +}; + +static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) +{ + unsigned int val = 0; + + regmap_read(lpass->top, SFR_LPASS_CORE_SW_RESET, &val); + + val &= ~mask; + regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val); + + usleep_range(100, 150); + + val |= mask; + regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val); +} + +static void exynos_lpass_enable(struct exynos_lpass *lpass) +{ + /* Unmask SFR, DMA and I2S interrupt */ + regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, + LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S); + + regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, + LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S); + + /* Activate related PADs from retention state */ + regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, + EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR); + + exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET); + exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET); + exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET); +} + +static void exynos_lpass_disable(struct exynos_lpass *lpass) +{ + /* Mask any unmasked IP interrupt sources */ + regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0); + regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0); + + /* Deactivate related PADs from retention state */ + regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, 0); +} + +static const struct regmap_config exynos_lpass_reg_conf = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0xfc, + .fast_io = true, +}; + +static int exynos_lpass_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos_lpass *lpass; + void __iomem *base_top; + struct resource *res; + + if (!dev->of_node) + return -ENODEV; + + lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL); + if (!lpass) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + base_top = devm_ioremap_resource(dev, res); + if (IS_ERR(base_top)) + return PTR_ERR(base_top); + + lpass->top = regmap_init_mmio(dev, base_top, + &exynos_lpass_reg_conf); + if (IS_ERR(lpass->top)) { + dev_err(dev, "LPASS top regmap initialization failed\n"); + return PTR_ERR(lpass->top); + } + + lpass->pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(lpass->pmu)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(lpass->pmu); + } + + platform_set_drvdata(pdev, lpass); + exynos_lpass_enable(lpass); + + return of_platform_populate(dev->of_node, NULL, NULL, dev); +} + +static int exynos_lpass_suspend(struct device *dev) +{ + struct exynos_lpass *lpass = dev_get_drvdata(dev); + + exynos_lpass_disable(lpass); + return 0; +} + +static int exynos_lpass_resume(struct device *dev) +{ + struct exynos_lpass *lpass = dev_get_drvdata(dev); + + exynos_lpass_enable(lpass); + return 0; +} + +static const struct of_device_id exynos_lpass_of_match[] = { + { .compatible = "samsung,exynos5433-lpass" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_lpass_of_match); + +static SIMPLE_DEV_PM_OPS(lpass_pm_ops, exynos_lpass_suspend, + exynos_lpass_resume); + +static struct platform_driver exynos_lpass_driver = { + .driver = { + .name = "exynos-lpass", + .pm = &lpass_pm_ops, + .of_match_table = exynos_lpass_of_match, + }, + .probe = exynos_lpass_probe, +}; +module_platform_driver(exynos_lpass_driver); + +MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 76f30f9..c28ff21 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -43,8 +43,10 @@ #define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0) - #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
+#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) +#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR BIT(28) + #endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */ -- 1.9.1
On Tue, 09 Aug 2016, Sylwester Nawrocki wrote:
This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle.
Signed-off-by: Inha Song ideal.song@samsung.com Signed-off-by: Beomho Seo beomho.seo@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
Changes since v4:
I only just reviewed v4.
Changes since v3:
- moved from sound/soc/samsung and rewritten as a MFD driver,
- PMU register definitions moved to include/linux/mfd/syscon/exynos5-pmu.h,
- added regmap for LPASS Top SFR region,
- cleaned up register bit field defintions.
Changes since v2:
- move misplaced SND_SAMSUNG_AUDSS Kconfig symbol addition to this patch.
drivers/mfd/Kconfig | 8 ++ drivers/mfd/Makefile | 1 + drivers/mfd/exynos-lpass.c | 185 +++++++++++++++++++++++++++++++++ include/linux/mfd/syscon/exynos5-pmu.h | 4 +- 4 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/exynos-lpass.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..a7ec890 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -281,6 +281,14 @@ config MFD_DLN2 etc. must be enabled in order to use the functionality of the device.
+config MFD_EXYNOS_LPASS
- tristate "Samsung Exynos SoC Low Power Audio Subsystem"
- select MFD_CORE
- select REGMAP_MMIO
- help
Select this option to enable support for Samsung Exynos Low PowerAudio Subsystem.config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..41510bb 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o +obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c new file mode 100644 index 0000000..956ce1f --- /dev/null +++ b/drivers/mfd/exynos-lpass.c @@ -0,0 +1,185 @@ +/*
- Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
- Authors: Inha Song ideal.song@samsung.com
Sylwester Nawrocki <s.nawrocki@samsung.com>
- Samsung Exynos SoC series Low Power Audio Subsystem driver.
- This module provides regmap for the Top SFR region and instantiates
- devices for IP blocks like DMAC, I2S, UART.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 and
- only version 2 as published by the Free Software Foundation.
- */
+#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h>
+/* LPASS Top register definitions */ +#define SFR_LPASS_CORE_SW_RESET (0x08) +#define LPASS_SB_SW_RESET (1 << 11) +#define LPASS_UART_SW_RESET (1 << 10) +#define LPASS_PCM_SW_RESET (1 << 9) +#define LPASS_I2S_SW_RESET (1 << 8) +#define LPASS_WDT1_SW_RESET (1 << 4) +#define LPASS_WDT0_SW_RESET (1 << 3) +#define LPASS_TIMER_SW_RESET (1 << 2) +#define LPASS_MEM_SW_RESET (1 << 1) +#define LPASS_DMA_SW_RESET (1 << 0)
+#define SFR_LPASS_INTR_CA5_MASK (0x48) +#define SFR_LPASS_INTR_CPU_MASK (0x58) +#define LPASS_INTR_APM (1 << 9) +#define LPASS_INTR_MIF (1 << 8) +#define LPASS_INTR_TIMER (1 << 7) +#define LPASS_INTR_DMA (1 << 6) +#define LPASS_INTR_GPIO (1 << 5) +#define LPASS_INTR_I2S (1 << 4) +#define LPASS_INTR_PCM (1 << 3) +#define LPASS_INTR_SLIMBUS (1 << 2) +#define LPASS_INTR_UART (1 << 1) +#define LPASS_INTR_SFR (1 << 0)
+struct exynos_lpass {
- struct regmap *pmu;
- struct regmap *top;
+};
+static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) +{
- unsigned int val = 0;
- regmap_read(lpass->top, SFR_LPASS_CORE_SW_RESET, &val);
- val &= ~mask;
- regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
- usleep_range(100, 150);
- val |= mask;
- regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
+}
+static void exynos_lpass_enable(struct exynos_lpass *lpass) +{
- /* Unmask SFR, DMA and I2S interrupt */
- regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);- regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);- /* Activate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);- exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
- exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
- exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET);
+}
+static void exynos_lpass_disable(struct exynos_lpass *lpass) +{
- /* Mask any unmasked IP interrupt sources */
- regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0);
- regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0);
- /* Deactivate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, 0);
+}
+static const struct regmap_config exynos_lpass_reg_conf = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .max_register = 0xfc,
- .fast_io = true,
+};
+static int exynos_lpass_probe(struct platform_device *pdev) +{
- struct device *dev = &pdev->dev;
- struct exynos_lpass *lpass;
- void __iomem *base_top;
- struct resource *res;
- if (!dev->of_node)
return -ENODEV;- lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL);
- if (!lpass)
return -ENOMEM;- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base_top = devm_ioremap_resource(dev, res);
- if (IS_ERR(base_top))
return PTR_ERR(base_top);- lpass->top = regmap_init_mmio(dev, base_top,
&exynos_lpass_reg_conf);- if (IS_ERR(lpass->top)) {
dev_err(dev, "LPASS top regmap initialization failed\n");return PTR_ERR(lpass->top);- }
- lpass->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,pmu-syscon");- if (IS_ERR(lpass->pmu)) {
dev_err(dev, "Failed to lookup PMU regmap\n");return PTR_ERR(lpass->pmu);- }
- platform_set_drvdata(pdev, lpass);
- exynos_lpass_enable(lpass);
- return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+static int exynos_lpass_suspend(struct device *dev) +{
- struct exynos_lpass *lpass = dev_get_drvdata(dev);
- exynos_lpass_disable(lpass);
- return 0;
+}
+static int exynos_lpass_resume(struct device *dev) +{
- struct exynos_lpass *lpass = dev_get_drvdata(dev);
- exynos_lpass_enable(lpass);
- return 0;
+}
+static const struct of_device_id exynos_lpass_of_match[] = {
- { .compatible = "samsung,exynos5433-lpass" },
- { },
+}; +MODULE_DEVICE_TABLE(of, exynos_lpass_of_match);
+static SIMPLE_DEV_PM_OPS(lpass_pm_ops, exynos_lpass_suspend,
exynos_lpass_resume);+static struct platform_driver exynos_lpass_driver = {
- .driver = {
.name = "exynos-lpass",.pm = &lpass_pm_ops,.of_match_table = exynos_lpass_of_match,- },
- .probe = exynos_lpass_probe,
+}; +module_platform_driver(exynos_lpass_driver);
+MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 76f30f9..c28ff21 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -43,8 +43,10 @@ #define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0)
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
+#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) +#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR BIT(28)
#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
On 08/09/2016 05:29 PM, Lee Jones wrote:
I only just reviewed v4.
OK, apologies for resending to fast. I assumed you might have no further comments after reviewing first patch from the series.
participants (2)
-
Lee Jones -
Sylwester Nawrocki