[alsa-devel] [REGRESSION] SB X-Fi Notebook stopped working in 1.0.23
This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. snd-usb-audio & Ko are loaded but to no good. alsamixer doesn't list the device and no device files in /dev/snd. Reverting back to 1.0.22.1 solves the problem. System: ASUS N51Vf laptop, OS: Fedora 12 2.6.31.12-174.2.3.fc12.x86_64
The Source wrote:
This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. snd-usb-audio & Ko are loaded but to no good. alsamixer doesn't list the device and no device files in /dev/snd.
When the driver doesn't attach, it should log some error message(s) to the system log.
Regards, Clemens
21.04.2010 10:53, Clemens Ladisch пишет:
The Source wrote:
This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. snd-usb-audio& Ko are loaded but to no good. alsamixer doesn't list the device and no device files in /dev/snd.
When the driver doesn't attach, it should log some error message(s) to the system log.
Regards, Clemens
usb 8-2: new full speed USB device using uhci_hcd and address 2 usb 8-2: New USB device found, idVendor=041e, idProduct=30d2 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: SB X-Fi Notebook usb 8-2: Manufacturer: Creative Technology Ltd usb 8-2: configuration #1 chosen from 1 choice input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11 generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3 input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12 generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4 ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, cannot set. ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
P.S. Another strange glitch - with 1.0.23 strange things start to happen, for example, bash hust hangs on exit and system becomes slow.
21.04.2010 12:49, The Source пишет:
21.04.2010 10:53, Clemens Ladisch пишет:
The Source wrote:
This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. snd-usb-audio& Ko are loaded but to no good. alsamixer doesn't list the device and no device files in /dev/snd.
When the driver doesn't attach, it should log some error message(s) to the system log.
Regards, Clemens
usb 8-2: new full speed USB device using uhci_hcd and address 2 usb 8-2: New USB device found, idVendor=041e, idProduct=30d2 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: SB X-Fi Notebook usb 8-2: Manufacturer: Creative Technology Ltd usb 8-2: configuration #1 chosen from 1 choice input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11 generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3 input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12 generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4 ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, cannot set. ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
P.S. Another strange glitch - with 1.0.23 strange things start to happen, for example, bash hust hangs on exit and system becomes slow.
Ok, the glitch happens because after inserting the card and getting those dmesg messages modprobe never exits and eats 100% CPU.
21.04.2010 12:52, The Source пишет:
21.04.2010 12:49, The Source пишет:
21.04.2010 10:53, Clemens Ladisch пишет:
The Source wrote:
This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. snd-usb-audio& Ko are loaded but to no good. alsamixer doesn't list the device and no device files in /dev/snd.
When the driver doesn't attach, it should log some error message(s) to the system log.
Regards, Clemens
usb 8-2: new full speed USB device using uhci_hcd and address 2 usb 8-2: New USB device found, idVendor=041e, idProduct=30d2 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: SB X-Fi Notebook usb 8-2: Manufacturer: Creative Technology Ltd usb 8-2: configuration #1 chosen from 1 choice input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11 generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3 input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12 generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4 ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, cannot set. ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
P.S. Another strange glitch - with 1.0.23 strange things start to happen, for example, bash hust hangs on exit and system becomes slow.
Ok, the glitch happens because after inserting the card and getting those dmesg messages modprobe never exits and eats 100% CPU.
And that's what dmesg says with 1.0.22.1 when the card works fine:
usb 8-2: Product: SB X-Fi Notebook usb 8-2: Manufacturer: Creative Technology Ltd usb 8-2: configuration #1 chosen from 1 choice input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11 generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3 input: Creative Technology Ltd SB X-Fi Notebook as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12 generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4 usbcore: registered new interface driver snd-usb-audio
participants (2)
-
Clemens Ladisch -
The Source