Limit the time window to maximum 1s in the macro. The driver deals with much shorter times (<200ms). This will fix a rare division by zero bug in Mode1. This could happen, when the work is not executed in time (within mode1_latency) after the interrupt. In this case the DAC33 will not receive the needed nSample command in time, and enters to an unknown state, and won't recover. In such event the time window will increase, and eventually going to be bigger than 1s, resulting devision by zero.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- sound/soc/codecs/tlv320dac33.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 6778e2e..c5ab8c8 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -58,7 +58,7 @@ (1000000000 / ((rate * 1000) / samples))

#define US_TO_SAMPLES(rate, us) \ - (rate / (1000000 / us)) + (rate / (1000000 / (us < 1000000 ? us : 1000000)))

#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \ ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))