[alsa-devel] [PATCH - microII 1/1] ALSA: usb-audio: Add Audio Advantage Micro II
Signed-off-by: Przemek Rudy prudy1@o2.pl
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index ebe9144..d42a584 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -9,6 +9,8 @@ * Alan Cox (alan@lxorguk.ukuu.org.uk) * Thomas Sailer (sailer@ife.ee.ethz.ch) * + * Audio Advantage Micro II support added by: + * Przemek Rudy (prudy1@o2.pl) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -30,6 +32,7 @@ #include <linux/usb.h> #include <linux/usb/audio.h>
+#include <sound/asoundef.h> #include <sound/core.h> #include <sound/control.h> #include <sound/hwdep.h> @@ -1315,6 +1318,211 @@ static struct std_mono_table ebox44_table[] = { {} };
+/* Audio Advantage Micro II findings: + * + * Mapping spdif AES bits to vendor register.bit: + * AES0: [0 0 0 0 2.3 2.2 2.1 2.0] - default 0x00 + * AES1: [3.3 3.2.3.1.3.0 2.7 2.6 2.5 2.4] - default: 0x01 + * AES2: [0 0 0 0 0 0 0 0] + * AES3: [0 0 0 0 0 0 x 0] - 'x' bit is set basing on standard usb request + * (UAC_EP_CS_ATTR_SAMPLE_RATE) for Audio Devices + * + * power on values: + * r2: 0x10 + * r3: 0x20 (b7 is zeroed just before playback (except IEC61937) and set + * just after it to 0xa0, presumably it disables/mutes some analog + * parts when there is no audio.) + * r9: 0x28 + * + * Optical transmitter on/off: + * vendor register.bit: 9.1 + * 0 - on (0x28 register value) + * 1 - off (0x2a register value) + * + */ +static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + return 0; +} + +static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol); + int err; + struct usb_interface *iface; + struct usb_host_interface *alts; + unsigned int ep; + unsigned char data[3]; + int rate; + + ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff; + ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff; + ucontrol->value.iec958.status[2] = 0x00; + + /* use known values for that card: interface#1 altsetting#1 */ + iface = usb_ifnum_to_if(mixer->chip->dev, 1); + alts = &iface->altsetting[1]; + ep = get_endpoint(alts, 0)->bEndpointAddress; + + err = snd_usb_ctl_msg(mixer->chip->dev, + usb_rcvctrlpipe(mixer->chip->dev, 0), + UAC_GET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, + ep, + data, + sizeof(data)); + if (err < 0) + goto end; + + rate = data[0] | (data[1] << 8) | (data[2] << 16); + ucontrol->value.iec958.status[3] = (rate == 48000) ? + IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100; + + err = 0; +end: + return err; +} + +static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol); + int err; + u8 reg; + unsigned long priv_backup = kcontrol->private_value; + + reg = ((ucontrol->value.iec958.status[1] & 0x0f) << 4) | + (ucontrol->value.iec958.status[0] & 0x0f); + err = snd_usb_ctl_msg(mixer->chip->dev, + usb_sndctrlpipe(mixer->chip->dev, 0), + UAC_SET_CUR, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + reg, + 2, + NULL, + 0); + if (err < 0) + goto end; + + kcontrol->private_value &= 0xfffff0f0; + kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0x0f) << 8; + kcontrol->private_value |= (ucontrol->value.iec958.status[0] & 0x0f); + + reg = (ucontrol->value.iec958.status[0] & IEC958_AES0_NONAUDIO) ? + 0xa0 : 0x20; + reg |= (ucontrol->value.iec958.status[1] >> 4) & 0x0f; + err = snd_usb_ctl_msg(mixer->chip->dev, + usb_sndctrlpipe(mixer->chip->dev, 0), + UAC_SET_CUR, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + reg, + 3, + NULL, + 0); + if (err < 0) + goto end; + + kcontrol->private_value &= 0xffff0fff; + kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0xf0) << 8; + + /* The frequency bits in AES3 cannot be set via register access. */ + + /* Silently ignore any bits from the request that cannot be set. */ + + err = (priv_backup != kcontrol->private_value); +end: + return err; +} + +static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.iec958.status[0] = 0x0f; + ucontrol->value.iec958.status[1] = 0xff; + ucontrol->value.iec958.status[2] = 0x00; + ucontrol->value.iec958.status[3] = 0x00; + + return 0; +} + +static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = !(kcontrol->private_value & 0x02); + + return 0; +} + +static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol); + int err; + u8 reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a; + + err = snd_usb_ctl_msg(mixer->chip->dev, + usb_sndctrlpipe(mixer->chip->dev, 0), + UAC_SET_CUR, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + reg, + 9, + NULL, + 0); + + if (!err) { + err = (reg != (kcontrol->private_value & 0x0ff)); + if (err) + kcontrol->private_value = reg; + } + + return err; +} + +static struct snd_kcontrol_new snd_microii_mixer_spdif[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = snd_microii_spdif_info, + .get = snd_microii_spdif_default_get, + .put = snd_microii_spdif_default_put, + .private_value = 0x00000100UL,/* reset value */ + }, + { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), + .info = snd_microii_spdif_info, + .get = snd_microii_spdif_mask_get, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH), + .info = snd_ctl_boolean_mono_info, + .get = snd_microii_spdif_switch_get, + .put = snd_microii_spdif_switch_put, + .private_value = 0x00000028UL,/* reset value */ + } +}; + +static int snd_microii_controls_create(struct usb_mixer_interface *mixer) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) { + err = snd_ctl_add(mixer->chip->card, + snd_ctl_new1(&snd_microii_mixer_spdif[i], mixer)); + if (err < 0) + return err; + } + + return err; +} + int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -1353,6 +1561,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) err = snd_xonar_u1_controls_create(mixer); break;
+ case USB_ID(0x0d8c, 0x0103): /* Audio Advantage Micro II */ + err = snd_microii_controls_create(mixer); + break; + case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */ err = snd_nativeinstruments_create_mixer(mixer, snd_nativeinstruments_ta6_mixers, diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8b75bcf..2be7410 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3434,4 +3434,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), } },
+{ + /* + * The original product_name is "USB Sound Device", however this name + * is also used by the CM106 based cards, so make it unique. + */ + USB_DEVICE(0x0d8c, 0x0103), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .product_name = "Audio Advantage MicroII", + .ifnum = QUIRK_NO_INTERFACE + } +}, + #undef USB_DEVICE_VENDOR_SPEC
Signed-off-by: Przemek Rudy prudy1@o2.pl
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 0d93175..8a6d9ca 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -101,6 +101,41 @@ USB-Audio."Audiophile USB (tm)".pcm.iec958 { } }
+# For this card we can (and must to get IEC61937) set AES bits +USB-Audio."MicroII".pcm.iec958 "cards.USB-Audio.Audio Advantage MicroII.pcm.iec958" +USB-Audio."Audio Advantage MicroII".pcm.iec958 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + + type hooks + slave.pcm { + type hw + card $CARD + } + + hooks.0 { + type ctl_elems + hook_args [ + { + interface PCM + name "IEC958 Playback Default" + preserve true + optional true + value [ $AES0 $AES1 $AES2 $AES3 ] + } + { + name "IEC958 Playback Switch" + lock true + preserve true + value 1 + } + ] + } +}
################################################################################
At Thu, 27 Jun 2013 23:52:34 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
Ditto like the kernel patch. The patch description is one of the most important things. Please give it more.
thanks,
Takashi
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 0d93175..8a6d9ca 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -101,6 +101,41 @@ USB-Audio."Audiophile USB (tm)".pcm.iec958 { } }
+# For this card we can (and must to get IEC61937) set AES bits +USB-Audio."MicroII".pcm.iec958 "cards.USB-Audio.Audio Advantage MicroII.pcm.iec958" +USB-Audio."Audio Advantage MicroII".pcm.iec958 {
- @args [ CARD AES0 AES1 AES2 AES3 ]
- @args.CARD { type string }
- @args.AES0 { type integer }
- @args.AES1 { type integer }
- @args.AES2 { type integer }
- @args.AES3 { type integer }
- type hooks
- slave.pcm {
type hwcard $CARD- }
- hooks.0 {
type ctl_elemshook_args [{interface PCMname "IEC958 Playback Default"preserve trueoptional truevalue [ $AES0 $AES1 $AES2 $AES3 ]}{name "IEC958 Playback Switch"lock truepreserve truevalue 1}]- }
+}
################################################################################
-- 1.8.1.4
Please find the following description:
------------------ This patch is adding extensive support (beside standard usb audio class) for Audio Advantage Micro II usb sound card. This patch depends on related kernel patch. Features included: - Add AES bits controls (so they can be accessible via device suffix AESn= as well as via tools like iecset). - SPDIF switch control added to turn on/off the optical transmitter (accessible e.g. via alsamixer tool) ------------------
Best, Przemek
On 2013-06-28 12:11, Takashi Iwai wrote:
At Thu, 27 Jun 2013 23:52:34 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
Ditto like the kernel patch. The patch description is one of the most important things. Please give it more.
thanks,
Takashi
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 0d93175..8a6d9ca 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -101,6 +101,41 @@ USB-Audio."Audiophile USB (tm)".pcm.iec958 { } }
+# For this card we can (and must to get IEC61937) set AES bits +USB-Audio."MicroII".pcm.iec958 "cards.USB-Audio.Audio Advantage MicroII.pcm.iec958" +USB-Audio."Audio Advantage MicroII".pcm.iec958 {
- @args [ CARD AES0 AES1 AES2 AES3 ]
- @args.CARD { type string }
- @args.AES0 { type integer }
- @args.AES1 { type integer }
- @args.AES2 { type integer }
- @args.AES3 { type integer }
- type hooks
- slave.pcm {
type hwcard $CARD- }
- hooks.0 {
type ctl_elemshook_args [{interface PCMname "IEC958 Playback Default"preserve trueoptional truevalue [ $AES0 $AES1 $AES2 $AES3 ]}{name "IEC958 Playback Switch"lock truepreserve truevalue 1}]- }
+}
################################################################################
-- 1.8.1.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Any chances to merge this one? I believe it simply got lost among others...
Thanks :) Przemek
On 06/28/2013 01:13 PM, Przemysław Rudy wrote:
Please find the following description:
This patch is adding extensive support (beside standard usb audio class) for Audio Advantage Micro II usb sound card. This patch depends on related kernel patch. Features included:
- Add AES bits controls (so they can be accessible via device suffix
AESn= as well as via tools like iecset).
- SPDIF switch control added to turn on/off the optical transmitter
(accessible e.g. via alsamixer tool)
Best, Przemek
On 2013-06-28 12:11, Takashi Iwai wrote:
At Thu, 27 Jun 2013 23:52:34 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
Ditto like the kernel patch. The patch description is one of the most important things. Please give it more.
thanks,
Takashi
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 0d93175..8a6d9ca 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -101,6 +101,41 @@ USB-Audio."Audiophile USB (tm)".pcm.iec958 { } }
+# For this card we can (and must to get IEC61937) set AES bits +USB-Audio."MicroII".pcm.iec958 "cards.USB-Audio.Audio Advantage MicroII.pcm.iec958" +USB-Audio."Audio Advantage MicroII".pcm.iec958 {
- @args [ CARD AES0 AES1 AES2 AES3 ]
- @args.CARD { type string }
- @args.AES0 { type integer }
- @args.AES1 { type integer }
- @args.AES2 { type integer }
- @args.AES3 { type integer }
- type hooks
- slave.pcm {
type hwcard $CARD- }
- hooks.0 {
type ctl_elemshook_args [{interface PCMname "IEC958 Playback Default"preserve trueoptional truevalue [ $AES0 $AES1 $AES2 $AES3 ]}{name "IEC958 Playback Switch"lock truepreserve truevalue 1}]- }
+}
################################################################################
-- 1.8.1.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Mon, 29 Jul 2013 20:29:50 +0200, Przemek Rudy wrote:
Any chances to merge this one? I believe it simply got lost among others...
Please resend the whole patche with a detailed changelog in a proper format. That is, give a patch that is applicable directly via git-am.
thanks,
Takashi
Thanks :) Przemek
On 06/28/2013 01:13 PM, Przemysław Rudy wrote:
Please find the following description:
This patch is adding extensive support (beside standard usb audio class) for Audio Advantage Micro II usb sound card. This patch depends on related kernel patch. Features included:
- Add AES bits controls (so they can be accessible via device suffix
AESn= as well as via tools like iecset).
- SPDIF switch control added to turn on/off the optical transmitter
(accessible e.g. via alsamixer tool)
Best, Przemek
On 2013-06-28 12:11, Takashi Iwai wrote:
At Thu, 27 Jun 2013 23:52:34 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
Ditto like the kernel patch. The patch description is one of the most important things. Please give it more.
thanks,
Takashi
diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 0d93175..8a6d9ca 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -101,6 +101,41 @@ USB-Audio."Audiophile USB (tm)".pcm.iec958 { } }
+# For this card we can (and must to get IEC61937) set AES bits +USB-Audio."MicroII".pcm.iec958 "cards.USB-Audio.Audio Advantage MicroII.pcm.iec958" +USB-Audio."Audio Advantage MicroII".pcm.iec958 {
- @args [ CARD AES0 AES1 AES2 AES3 ]
- @args.CARD { type string }
- @args.AES0 { type integer }
- @args.AES1 { type integer }
- @args.AES2 { type integer }
- @args.AES3 { type integer }
- type hooks
- slave.pcm {
type hwcard $CARD- }
- hooks.0 {
type ctl_elemshook_args [{interface PCMname "IEC958 Playback Default"preserve trueoptional truevalue [ $AES0 $AES1 $AES2 $AES3 ]}{name "IEC958 Playback Switch"lock truepreserve truevalue 1}]- }
+}
################################################################################
-- 1.8.1.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Thu, 27 Jun 2013 23:52:33 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
The changes look OK to me, but the patch description is completely missing. Please give a bit more details in the patch description part.
thanks,
Takashi
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index ebe9144..d42a584 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -9,6 +9,8 @@
Alan Cox (alan@lxorguk.ukuu.org.uk)Thomas Sailer (sailer@ife.ee.ethz.ch)
- Audio Advantage Micro II support added by:
Przemek Rudy (prudy1@o2.pl)- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
@@ -30,6 +32,7 @@ #include <linux/usb.h> #include <linux/usb/audio.h>
+#include <sound/asoundef.h> #include <sound/core.h> #include <sound/control.h> #include <sound/hwdep.h> @@ -1315,6 +1318,211 @@ static struct std_mono_table ebox44_table[] = { {} };
+/* Audio Advantage Micro II findings:
- Mapping spdif AES bits to vendor register.bit:
- AES0: [0 0 0 0 2.3 2.2 2.1 2.0] - default 0x00
- AES1: [3.3 3.2.3.1.3.0 2.7 2.6 2.5 2.4] - default: 0x01
- AES2: [0 0 0 0 0 0 0 0]
- AES3: [0 0 0 0 0 0 x 0] - 'x' bit is set basing on standard usb request
(UAC_EP_CS_ATTR_SAMPLE_RATE) for Audio Devices
- power on values:
- r2: 0x10
- r3: 0x20 (b7 is zeroed just before playback (except IEC61937) and set
just after it to 0xa0, presumably it disables/mutes some analog
parts when there is no audio.)
- r9: 0x28
- Optical transmitter on/off:
- vendor register.bit: 9.1
- 0 - on (0x28 register value)
- 1 - off (0x2a register value)
- */
+static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
+{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
- uinfo->count = 1;
- return 0;
+}
+static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- struct usb_interface *iface;
- struct usb_host_interface *alts;
- unsigned int ep;
- unsigned char data[3];
- int rate;
- ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff;
- ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- /* use known values for that card: interface#1 altsetting#1 */
- iface = usb_ifnum_to_if(mixer->chip->dev, 1);
- alts = &iface->altsetting[1];
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),UAC_GET_CUR,USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,UAC_EP_CS_ATTR_SAMPLE_RATE << 8,ep,data,sizeof(data));- if (err < 0)
goto end;- rate = data[0] | (data[1] << 8) | (data[2] << 16);
- ucontrol->value.iec958.status[3] = (rate == 48000) ?
IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100;- err = 0;
+end:
- return err;
+}
+static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg;
- unsigned long priv_backup = kcontrol->private_value;
- reg = ((ucontrol->value.iec958.status[1] & 0x0f) << 4) |
(ucontrol->value.iec958.status[0] & 0x0f);- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,2,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xfffff0f0;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
- kcontrol->private_value |= (ucontrol->value.iec958.status[0] & 0x0f);
- reg = (ucontrol->value.iec958.status[0] & IEC958_AES0_NONAUDIO) ?
0xa0 : 0x20;- reg |= (ucontrol->value.iec958.status[1] >> 4) & 0x0f;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,3,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xffff0fff;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
- /* The frequency bits in AES3 cannot be set via register access. */
- /* Silently ignore any bits from the request that cannot be set. */
- err = (priv_backup != kcontrol->private_value);
+end:
- return err;
+}
+static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.iec958.status[0] = 0x0f;
- ucontrol->value.iec958.status[1] = 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- ucontrol->value.iec958.status[3] = 0x00;
- return 0;
+}
+static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.integer.value[0] = !(kcontrol->private_value & 0x02);
- return 0;
+}
+static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,9,NULL,0);- if (!err) {
err = (reg != (kcontrol->private_value & 0x0ff));if (err)kcontrol->private_value = reg;- }
- return err;
+}
+static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
- {
.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),.info = snd_microii_spdif_info,.get = snd_microii_spdif_default_get,.put = snd_microii_spdif_default_put,.private_value = 0x00000100UL,/* reset value */- },
- {
.access = SNDRV_CTL_ELEM_ACCESS_READ,.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),.info = snd_microii_spdif_info,.get = snd_microii_spdif_mask_get,- },
- {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),.info = snd_ctl_boolean_mono_info,.get = snd_microii_spdif_switch_get,.put = snd_microii_spdif_switch_put,.private_value = 0x00000028UL,/* reset value */- }
+};
+static int snd_microii_controls_create(struct usb_mixer_interface *mixer) +{
- int err, i;
- for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) {
err = snd_ctl_add(mixer->chip->card,snd_ctl_new1(&snd_microii_mixer_spdif[i], mixer));if (err < 0)return err;- }
- return err;
+}
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -1353,6 +1561,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) err = snd_xonar_u1_controls_create(mixer); break;
- case USB_ID(0x0d8c, 0x0103): /* Audio Advantage Micro II */
err = snd_microii_controls_create(mixer);break;- case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */ err = snd_nativeinstruments_create_mixer(mixer, snd_nativeinstruments_ta6_mixers,
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8b75bcf..2be7410 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3434,4 +3434,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), } },
+{
- /*
* The original product_name is "USB Sound Device", however this name* is also used by the CM106 based cards, so make it unique.*/- USB_DEVICE(0x0d8c, 0x0103),
- .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
.product_name = "Audio Advantage MicroII",.ifnum = QUIRK_NO_INTERFACE- }
+},
#undef USB_DEVICE_VENDOR_SPEC
1.8.1.4
Sure Takashi, here you are:
------------------ This patch is adding extensive support (beside standard usb audio class) for Audio Advantage Micro II usb sound card. Features included: - Access to AES bits (so now sending the IEC61937 compliant stream is possible). - Mixer SPDIF control added to turn on/off the optical transmitter. ------------------
Best, Przemek
On 2013-06-28 12:10, Takashi Iwai wrote:
At Thu, 27 Jun 2013 23:52:33 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
The changes look OK to me, but the patch description is completely missing. Please give a bit more details in the patch description part.
thanks,
Takashi
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index ebe9144..d42a584 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -9,6 +9,8 @@
Alan Cox (alan@lxorguk.ukuu.org.uk)Thomas Sailer (sailer@ife.ee.ethz.ch)
- Audio Advantage Micro II support added by:
Przemek Rudy (prudy1@o2.pl)- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
@@ -30,6 +32,7 @@ #include <linux/usb.h> #include <linux/usb/audio.h>
+#include <sound/asoundef.h> #include <sound/core.h> #include <sound/control.h> #include <sound/hwdep.h> @@ -1315,6 +1318,211 @@ static struct std_mono_table ebox44_table[] = { {} };
+/* Audio Advantage Micro II findings:
- Mapping spdif AES bits to vendor register.bit:
- AES0: [0 0 0 0 2.3 2.2 2.1 2.0] - default 0x00
- AES1: [3.3 3.2.3.1.3.0 2.7 2.6 2.5 2.4] - default: 0x01
- AES2: [0 0 0 0 0 0 0 0]
- AES3: [0 0 0 0 0 0 x 0] - 'x' bit is set basing on standard usb request
(UAC_EP_CS_ATTR_SAMPLE_RATE) for Audio Devices
- power on values:
- r2: 0x10
- r3: 0x20 (b7 is zeroed just before playback (except IEC61937) and set
just after it to 0xa0, presumably it disables/mutes some analog
parts when there is no audio.)
- r9: 0x28
- Optical transmitter on/off:
- vendor register.bit: 9.1
- 0 - on (0x28 register value)
- 1 - off (0x2a register value)
- */
+static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
+{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
- uinfo->count = 1;
- return 0;
+}
+static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- struct usb_interface *iface;
- struct usb_host_interface *alts;
- unsigned int ep;
- unsigned char data[3];
- int rate;
- ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff;
- ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- /* use known values for that card: interface#1 altsetting#1 */
- iface = usb_ifnum_to_if(mixer->chip->dev, 1);
- alts = &iface->altsetting[1];
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),UAC_GET_CUR,USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,UAC_EP_CS_ATTR_SAMPLE_RATE << 8,ep,data,sizeof(data));- if (err < 0)
goto end;- rate = data[0] | (data[1] << 8) | (data[2] << 16);
- ucontrol->value.iec958.status[3] = (rate == 48000) ?
IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100;- err = 0;
+end:
- return err;
+}
+static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg;
- unsigned long priv_backup = kcontrol->private_value;
- reg = ((ucontrol->value.iec958.status[1] & 0x0f) << 4) |
(ucontrol->value.iec958.status[0] & 0x0f);- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,2,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xfffff0f0;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
- kcontrol->private_value |= (ucontrol->value.iec958.status[0] & 0x0f);
- reg = (ucontrol->value.iec958.status[0] & IEC958_AES0_NONAUDIO) ?
0xa0 : 0x20;- reg |= (ucontrol->value.iec958.status[1] >> 4) & 0x0f;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,3,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xffff0fff;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
- /* The frequency bits in AES3 cannot be set via register access. */
- /* Silently ignore any bits from the request that cannot be set. */
- err = (priv_backup != kcontrol->private_value);
+end:
- return err;
+}
+static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.iec958.status[0] = 0x0f;
- ucontrol->value.iec958.status[1] = 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- ucontrol->value.iec958.status[3] = 0x00;
- return 0;
+}
+static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.integer.value[0] = !(kcontrol->private_value & 0x02);
- return 0;
+}
+static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,9,NULL,0);- if (!err) {
err = (reg != (kcontrol->private_value & 0x0ff));if (err)kcontrol->private_value = reg;- }
- return err;
+}
+static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
- {
.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),.info = snd_microii_spdif_info,.get = snd_microii_spdif_default_get,.put = snd_microii_spdif_default_put,.private_value = 0x00000100UL,/* reset value */- },
- {
.access = SNDRV_CTL_ELEM_ACCESS_READ,.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),.info = snd_microii_spdif_info,.get = snd_microii_spdif_mask_get,- },
- {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),.info = snd_ctl_boolean_mono_info,.get = snd_microii_spdif_switch_get,.put = snd_microii_spdif_switch_put,.private_value = 0x00000028UL,/* reset value */- }
+};
+static int snd_microii_controls_create(struct usb_mixer_interface *mixer) +{
- int err, i;
- for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) {
err = snd_ctl_add(mixer->chip->card,snd_ctl_new1(&snd_microii_mixer_spdif[i], mixer));if (err < 0)return err;- }
- return err;
+}
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -1353,6 +1561,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) err = snd_xonar_u1_controls_create(mixer); break;
- case USB_ID(0x0d8c, 0x0103): /* Audio Advantage Micro II */
err = snd_microii_controls_create(mixer);break;- case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */ err = snd_nativeinstruments_create_mixer(mixer, snd_nativeinstruments_ta6_mixers,
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8b75bcf..2be7410 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3434,4 +3434,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), } },
+{
- /*
* The original product_name is "USB Sound Device", however this name* is also used by the CM106 based cards, so make it unique.*/- USB_DEVICE(0x0d8c, 0x0103),
- .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
.product_name = "Audio Advantage MicroII",.ifnum = QUIRK_NO_INTERFACE- }
+},
#undef USB_DEVICE_VENDOR_SPEC
1.8.1.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Fri, 28 Jun 2013 13:07:22 +0200, Przemysław Rudy wrote:
Sure Takashi, here you are:
This patch is adding extensive support (beside standard usb audio class) for Audio Advantage Micro II usb sound card. Features included:
- Access to AES bits (so now sending the IEC61937 compliant stream is
possible).
- Mixer SPDIF control added to turn on/off the optical transmitter.
OK, I applied the patch with the description above.
thanks,
Takashi
Best, Przemek
On 2013-06-28 12:10, Takashi Iwai wrote:
At Thu, 27 Jun 2013 23:52:33 +0200, Przemek Rudy wrote:
Signed-off-by: Przemek Rudy prudy1@o2.pl
The changes look OK to me, but the patch description is completely missing. Please give a bit more details in the patch description part.
thanks,
Takashi
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index ebe9144..d42a584 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -9,6 +9,8 @@
Alan Cox (alan@lxorguk.ukuu.org.uk)Thomas Sailer (sailer@ife.ee.ethz.ch)
- Audio Advantage Micro II support added by:
Przemek Rudy (prudy1@o2.pl)- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
@@ -30,6 +32,7 @@ #include <linux/usb.h> #include <linux/usb/audio.h>
+#include <sound/asoundef.h> #include <sound/core.h> #include <sound/control.h> #include <sound/hwdep.h> @@ -1315,6 +1318,211 @@ static struct std_mono_table ebox44_table[] = { {} };
+/* Audio Advantage Micro II findings:
- Mapping spdif AES bits to vendor register.bit:
- AES0: [0 0 0 0 2.3 2.2 2.1 2.0] - default 0x00
- AES1: [3.3 3.2.3.1.3.0 2.7 2.6 2.5 2.4] - default: 0x01
- AES2: [0 0 0 0 0 0 0 0]
- AES3: [0 0 0 0 0 0 x 0] - 'x' bit is set basing on standard usb request
(UAC_EP_CS_ATTR_SAMPLE_RATE) for Audio Devices
- power on values:
- r2: 0x10
- r3: 0x20 (b7 is zeroed just before playback (except IEC61937) and set
just after it to 0xa0, presumably it disables/mutes some analog
parts when there is no audio.)
- r9: 0x28
- Optical transmitter on/off:
- vendor register.bit: 9.1
- 0 - on (0x28 register value)
- 1 - off (0x2a register value)
- */
+static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
+{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
- uinfo->count = 1;
- return 0;
+}
+static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- struct usb_interface *iface;
- struct usb_host_interface *alts;
- unsigned int ep;
- unsigned char data[3];
- int rate;
- ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff;
- ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- /* use known values for that card: interface#1 altsetting#1 */
- iface = usb_ifnum_to_if(mixer->chip->dev, 1);
- alts = &iface->altsetting[1];
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),UAC_GET_CUR,USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,UAC_EP_CS_ATTR_SAMPLE_RATE << 8,ep,data,sizeof(data));- if (err < 0)
goto end;- rate = data[0] | (data[1] << 8) | (data[2] << 16);
- ucontrol->value.iec958.status[3] = (rate == 48000) ?
IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100;- err = 0;
+end:
- return err;
+}
+static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg;
- unsigned long priv_backup = kcontrol->private_value;
- reg = ((ucontrol->value.iec958.status[1] & 0x0f) << 4) |
(ucontrol->value.iec958.status[0] & 0x0f);- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,2,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xfffff0f0;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
- kcontrol->private_value |= (ucontrol->value.iec958.status[0] & 0x0f);
- reg = (ucontrol->value.iec958.status[0] & IEC958_AES0_NONAUDIO) ?
0xa0 : 0x20;- reg |= (ucontrol->value.iec958.status[1] >> 4) & 0x0f;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,3,NULL,0);- if (err < 0)
goto end;- kcontrol->private_value &= 0xffff0fff;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
- /* The frequency bits in AES3 cannot be set via register access. */
- /* Silently ignore any bits from the request that cannot be set. */
- err = (priv_backup != kcontrol->private_value);
+end:
- return err;
+}
+static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.iec958.status[0] = 0x0f;
- ucontrol->value.iec958.status[1] = 0xff;
- ucontrol->value.iec958.status[2] = 0x00;
- ucontrol->value.iec958.status[3] = 0x00;
- return 0;
+}
+static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- ucontrol->value.integer.value[0] = !(kcontrol->private_value & 0x02);
- return 0;
+}
+static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
- u8 reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
- err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0),UAC_SET_CUR,USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,reg,9,NULL,0);- if (!err) {
err = (reg != (kcontrol->private_value & 0x0ff));if (err)kcontrol->private_value = reg;- }
- return err;
+}
+static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
- {
.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),.info = snd_microii_spdif_info,.get = snd_microii_spdif_default_get,.put = snd_microii_spdif_default_put,.private_value = 0x00000100UL,/* reset value */- },
- {
.access = SNDRV_CTL_ELEM_ACCESS_READ,.iface = SNDRV_CTL_ELEM_IFACE_PCM,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),.info = snd_microii_spdif_info,.get = snd_microii_spdif_mask_get,- },
- {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),.info = snd_ctl_boolean_mono_info,.get = snd_microii_spdif_switch_get,.put = snd_microii_spdif_switch_put,.private_value = 0x00000028UL,/* reset value */- }
+};
+static int snd_microii_controls_create(struct usb_mixer_interface *mixer) +{
- int err, i;
- for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) {
err = snd_ctl_add(mixer->chip->card,snd_ctl_new1(&snd_microii_mixer_spdif[i], mixer));if (err < 0)return err;- }
- return err;
+}
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -1353,6 +1561,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) err = snd_xonar_u1_controls_create(mixer); break;
- case USB_ID(0x0d8c, 0x0103): /* Audio Advantage Micro II */
err = snd_microii_controls_create(mixer);break;- case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */ err = snd_nativeinstruments_create_mixer(mixer, snd_nativeinstruments_ta6_mixers,
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8b75bcf..2be7410 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3434,4 +3434,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), } },
+{
- /*
* The original product_name is "USB Sound Device", however this name* is also used by the CM106 based cards, so make it unique.*/- USB_DEVICE(0x0d8c, 0x0103),
- .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
.product_name = "Audio Advantage MicroII",.ifnum = QUIRK_NO_INTERFACE- }
+},
#undef USB_DEVICE_VENDOR_SPEC
1.8.1.4
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
participants (3)
-
Przemek Rudy -
Przemysław Rudy
-
Takashi Iwai