There is a long standing bug in the drivers for cards with a vmixer because I overlooked a detail in the c++ generic driver by echoaudio. Those cards do not have a line-out volume control. It is a virtual control provided by the generic driver. The bug is harmless because the DSP just ignores the command to change the volume. Since that control has been removed, echomixer must be updated. With this patch it uses the vmixer to fake the line-out volume.

This patch makes echomixer work with the new drivers.

Signed-off-by Giuliano Pochini pochini@shiny.it

--- alsa-tools-1.0.19/echomixer/echomixer.c__orig2 2009-03-15 19:03:24.000000000 +0100 +++ alsa-tools-1.0.19/echomixer/echomixer.c 2009-03-15 19:36:23.000000000 +0100 @@ -1178,6 +1178,29 @@ void UpdateMixerVolume(int outchannel) {

+// Changes the vmixer volume according to the current Line-out volume for vmixer cards. +void UpdateVMixerVolume(int outchannel) { + snd_ctl_elem_id_t *id; + snd_ctl_elem_value_t *control; + int err, val, ch; + + snd_ctl_elem_id_alloca(&id); + snd_ctl_elem_value_alloca(&control); + snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER); + + for (ch=0; ch<nPOut; ch++) { + val=Add_dB(vmixerControl.mixer[outchannel][ch].Gain, lineoutControl.Gain[outchannel]); + ClampOutputVolume(&val); + snd_ctl_elem_id_set_numid(id, vmixerControl.mixer[outchannel][ch].id); + snd_ctl_elem_value_set_id(control, id); + snd_ctl_elem_value_set_integer(control, 0, val); + if ((err = snd_ctl_elem_write(ctlhandle, control)) < 0) + printf("Control %s element write error: %s\n", card, snd_strerror(err)); + } +} + + + void LineOut_volume_changed(GtkWidget *widget, gpointer ch) { char str[16]; int err, channel, val; @@ -1204,6 +1227,9 @@ void LineOut_volume_changed(GtkWidget *w snd_ctl_elem_value_set_integer(control, channel, val); if ((err=snd_ctl_elem_write(ctlhandle, control))<0) printf("Control %s element write error: %s\n", card, snd_strerror(err)); + } else if (vmixerId) { + UpdateVMixerVolume(channel); + UpdateMixerVolume(channel); } else { // Otherwise we have to emulate it. UpdatePCMVolume(channel); UpdateMixerVolume(channel); @@ -1217,10 +1243,11 @@ void LineOut_volume_changed(GtkWidget *w

void Vmixer_volume_changed(GtkWidget *widget, gpointer ch) { char str[16]; - int val, channel; + int val, rval, channel; int o, v;

channel=(int)(long)ch; + val=INVERT((int)GTK_ADJUSTMENT(widget)->value);

#ifdef REVERSE v=channel; @@ -1230,13 +1257,17 @@ void Vmixer_volume_changed(GtkWidget *wi o=channel; #endif

- val=INVERT((int)GTK_ADJUSTMENT(widget)->value); + // Emulate the line-out volume if this card can't do it in hw. + if (!lineoutId) { + rval=Add_dB(val, lineoutControl.Gain[o]); + ClampOutputVolume(&rval); + }

- SetMixerGain(&vmixerControl.mixer[o][v], val); + SetMixerGain(&vmixerControl.mixer[o][v], rval); vmixerControl.mixer[o][v].Gain=val;

if (Gang) { - SetMixerGain(&vmixerControl.mixer[o^1][v^1], val); + SetMixerGain(&vmixerControl.mixer[o^1][v^1], rval); vmixerControl.mixer[o^1][v^1].Gain=val; }

-- Giuliano.