The legacy i2c binding model is going away soon, so convert the AOA codec drivers to the new model or they'll break.

Signed-off-by: Jean Delvare khali@linux-fr.org Cc: Johannes Berg johannes@sipsolutions.net Cc: Benjamin Herrenschmidt benh@kernel.crashing.org Tested-by: Andreas Schwab schwab@linux-m68k.org --- Johannes, this is a reworked patch which assumes that the onyx codec probing can fail. It's not exactly clean but that's the easiest approach for now. Can you please give it a try? Thanks.

sound/aoa/codecs/onyx.c | 76 ++++++++++++++++++++++++++++++++--------------- sound/aoa/codecs/tas.c | 66 +++++++++++++++++++++++++--------------- 2 files changed, 95 insertions(+), 47 deletions(-)

--- linux-2.6.30-rc2.orig/sound/aoa/codecs/onyx.c 2009-04-15 09:55:20.000000000 +0200 +++ linux-2.6.30-rc2/sound/aoa/codecs/onyx.c 2009-04-15 14:07:50.000000000 +0200 @@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec struct onyx { /* cache registers 65 to 80, they are write-only! */ u8 cache[16]; - struct i2c_client i2c; + struct i2c_client *i2c; struct aoa_codec codec; u32 initialised:1, spdif_locked:1, @@ -72,7 +72,7 @@ static int onyx_read_register(struct ony *value = onyx->cache[reg-FIRSTREGISTER]; return 0; } - v = i2c_smbus_read_byte_data(&onyx->i2c, reg); + v = i2c_smbus_read_byte_data(onyx->i2c, reg); if (v < 0) return -1; *value = (u8)v; @@ -84,7 +84,7 @@ static int onyx_write_register(struct on { int result;

- result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value); + result = i2c_smbus_write_byte_data(onyx->i2c, reg, value); if (!result) onyx->cache[reg-FIRSTREGISTER] = value; return result; @@ -996,12 +996,45 @@ static void onyx_exit_codec(struct aoa_c onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); }

-static struct i2c_driver onyx_driver; - static int onyx_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * We know the driver is already loaded, so the device should be + * already bound. If not it means binding failed, which suggests + * the device doesn't really exist and should be deleted. + * Ideally this would be replaced by better checks _before_ + * instantiating the device. + */ + if (!client->driver) { + i2c_unregister_device(client); + return -ENODEV; + } + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int onyx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct onyx *onyx; u8 dummy;

@@ -1011,20 +1044,12 @@ static int onyx_create(struct i2c_adapte return -ENOMEM;

mutex_init(&onyx->mutex); - onyx->i2c.driver = &onyx_driver; - onyx->i2c.adapter = adapter; - onyx->i2c.addr = addr & 0x7f; - strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&onyx->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } + onyx->i2c = client; + i2c_set_clientdata(client, onyx);

/* we try to read from register ONYX_REG_CONTROL * to check if the codec is present */ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) { - i2c_detach_client(&onyx->i2c); printk(KERN_ERR PFX "failed to read control register\n"); goto fail; } @@ -1036,14 +1061,14 @@ static int onyx_create(struct i2c_adapte onyx->codec.node = of_node_get(node);

if (aoa_codec_register(&onyx->codec)) { - i2c_detach_client(&onyx->i2c); goto fail; } printk(KERN_DEBUG PFX "created and attached onyx instance\n"); return 0; fail: + i2c_set_clientdata(client, NULL); kfree(onyx); - return -EINVAL; + return -ENODEV; }

static int onyx_i2c_attach(struct i2c_adapter *adapter) @@ -1080,28 +1105,33 @@ static int onyx_i2c_attach(struct i2c_ad return onyx_create(adapter, NULL, 0x47); }

-static int onyx_i2c_detach(struct i2c_client *client) +static int onyx_i2c_remove(struct i2c_client *client) { - struct onyx *onyx = container_of(client, struct onyx, i2c); - int err; + struct onyx *onyx = i2c_get_clientdata(client);

- if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&onyx->codec); of_node_put(onyx->codec.node); if (onyx->codec_info) kfree(onyx->codec_info); + i2c_set_clientdata(client, onyx); kfree(onyx); return 0; }

+static const struct i2c_device_id onyx_i2c_id[] = { + { "aoa_codec_onyx", 0 }, + { } +}; + static struct i2c_driver onyx_driver = { .driver = { .name = "aoa_codec_onyx", .owner = THIS_MODULE, }, .attach_adapter = onyx_i2c_attach, - .detach_client = onyx_i2c_detach, + .probe = onyx_i2c_probe, + .remove = onyx_i2c_remove, + .id_table = onyx_i2c_id, };

static int __init onyx_init(void) --- linux-2.6.30-rc2.orig/sound/aoa/codecs/tas.c 2009-04-15 09:55:20.000000000 +0200 +++ linux-2.6.30-rc2/sound/aoa/codecs/tas.c 2009-04-15 09:56:39.000000000 +0200 @@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for

struct tas { struct aoa_codec codec; - struct i2c_client i2c; + struct i2c_client *i2c; u32 mute_l:1, mute_r:1 , controls_created:1 , drc_enabled:1, @@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct a static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data) { if (len == 1) - return i2c_smbus_write_byte_data(&tas->i2c, reg, *data); + return i2c_smbus_write_byte_data(tas->i2c, reg, *data); else - return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data); + return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data); }

static void tas3004_set_drc(struct tas *tas) @@ -882,12 +882,34 @@ static void tas_exit_codec(struct aoa_co }

-static struct i2c_driver tas_driver; - static int tas_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int tas_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct tas *tas;

tas = kzalloc(sizeof(struct tas), GFP_KERNEL); @@ -896,17 +918,11 @@ static int tas_create(struct i2c_adapter return -ENOMEM;

mutex_init(&tas->mtx); - tas->i2c.driver = &tas_driver; - tas->i2c.adapter = adapter; - tas->i2c.addr = addr; + tas->i2c = client; + i2c_set_clientdata(client, tas); + /* seems that half is a saner default */ tas->drc_range = TAS3004_DRC_MAX / 2; - strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&tas->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - }

strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN); tas->codec.owner = THIS_MODULE; @@ -915,14 +931,12 @@ static int tas_create(struct i2c_adapter tas->codec.node = of_node_get(node);

if (aoa_codec_register(&tas->codec)) { - goto detach; + goto fail; } printk(KERN_DEBUG "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n", - addr, node->full_name); + (unsigned int)client->addr, node->full_name); return 0; - detach: - i2c_detach_client(&tas->i2c); fail: mutex_destroy(&tas->mtx); kfree(tas); @@ -970,14 +984,11 @@ static int tas_i2c_attach(struct i2c_ada return -ENODEV; }

-static int tas_i2c_detach(struct i2c_client *client) +static int tas_i2c_remove(struct i2c_client *client) { - struct tas *tas = container_of(client, struct tas, i2c); - int err; + struct tas *tas = i2c_get_clientdata(client); u8 tmp = TAS_ACR_ANALOG_PDOWN;

- if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&tas->codec); of_node_put(tas->codec.node);

@@ -989,13 +1000,20 @@ static int tas_i2c_detach(struct i2c_cli return 0; }

+static const struct i2c_device_id tas_i2c_id[] = { + { "aoa_codec_tas", 0 }, + { } +}; + static struct i2c_driver tas_driver = { .driver = { .name = "aoa_codec_tas", .owner = THIS_MODULE, }, .attach_adapter = tas_i2c_attach, - .detach_client = tas_i2c_detach, + .probe = tas_i2c_probe, + .remove = tas_i2c_remove, + .id_table = tas_i2c_id, };

static int __init tas_init(void)