[alsa-devel] [PATCH 2/3] ASoC: DaVinci: Added selection of clk input pin for McBSP
From: Raffaele Recalcati raffaele.recalcati@bticino.it
When McBSP peripheral gets the clock from an external pin, there are three possible chooses, MCBSP_CLKX, MCBSP_CLKR and MCBSP_CLKS. evm-dm365 uses MCBSP_CLKR, instead in bmx board I have a different hardware connection and I use MCBSP_CLKS, so I have added this possibility.
This patch has been developed against the: http://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git git tree and has been tested on bmx board (similar to dm365 evm)
Signed-off-by: Raffaele Recalcati raffaele.recalcati@bticino.it Signed-off-by: Davide Bonfanti davide.bonfanti@bticino.it --- arch/arm/mach-davinci/include/mach/asp.h | 8 ++++++++ sound/soc/davinci/davinci-i2s.c | 28 +++++++++++++++++++++++----- 2 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index 834725f..314570d 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -63,6 +63,9 @@ struct snd_platform_data { unsigned sram_size_playback; unsigned sram_size_capture;
+ /* To be used when cpu gets clock from external pin */ + int clk_input_pin; + /* McASP specific fields */ int tdm_slots; u8 op_mode; @@ -78,6 +81,11 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ };
+enum { + MCBSP_CLKR = 0, /* DM365 */ + MCBSP_CLKS, +}; + #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index 319e8ca..e478be9 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -152,6 +152,7 @@ struct davinci_mcbsp_dev {
unsigned int fmt; int clk_div; + int clk_input_pin; };
static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev, @@ -278,11 +279,26 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, DAVINCI_MCBSP_PCR_CLKRM; break; case SND_SOC_DAIFMT_CBM_CFS: - /* McBSP CLKR pin is the input for the Sample Rate Generator. - * McBSP FSR and FSX are driven by the Sample Rate Generator. */ - pcr = DAVINCI_MCBSP_PCR_SCLKME | - DAVINCI_MCBSP_PCR_FSXM | - DAVINCI_MCBSP_PCR_FSRM; + pcr = DAVINCI_MCBSP_PCR_FSRM | DAVINCI_MCBSP_PCR_FSXM; + /* + * Selection of the clock input pin that is the + * input for the Sample Rate Generator. + * McBSP FSR and FSX are driven by the Sample Rate + * Generator. + */ + switch (dev->clk_input_pin) { + case MCBSP_CLKS: + pcr |= DAVINCI_MCBSP_PCR_CLKXM | + DAVINCI_MCBSP_PCR_CLKRM; + break; + case MCBSP_CLKR: + pcr |= DAVINCI_MCBSP_PCR_SCLKME; + break; + default: + printk(KERN_ERR "%s:bad clk_input_pin\n", __func__); + return -EINVAL; + } + break; case SND_SOC_DAIFMT_CBM_CFM: /* codec is master */ @@ -436,6 +452,7 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream, srgr |= clk_div; break; case SND_SOC_DAIFMT_CBM_CFS: + /* Clock given on CLKS */ srgr = DAVINCI_MCBSP_SRGR_FSGM; clk_div = dev->clk_div - 1; srgr |= DAVINCI_MCBSP_SRGR_FWID(mcbsp_word_length * 8 - 1); @@ -626,6 +643,7 @@ static int davinci_i2s_probe(struct platform_device *pdev) pdata->sram_size_playback; dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].sram_size = pdata->sram_size_capture; + dev->clk_input_pin = pdata->clk_input_pin; } dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) {
On Wed, Jun 30, 2010 at 03:47:57PM +0200, Raffaele Recalcati wrote:
- /* To be used when cpu gets clock from external pin */
- int clk_input_pin;
As previously indicated please say how to use this.
default:
printk(KERN_ERR "%s:bad clk_input_pin\n", __func__);
Use dev_err().
participants (2)
-
Mark Brown
-
Raffaele Recalcati