ASoC Multi-Component Support moves some code from sound/soc/omap/zoom2.c into arch/arm/mach-omap2/board-zoom2.c. However, that code should go to board-zoom-peripherals.c instead as there is common code and registration for zoom boards.

Signed-off-by: Jarkko Nikula jhnikula@gmail.com Cc: Vikram Pandita vikram.pandita@ti.com Cc: Lopez Cruz, Misael x0052729@ti.com Cc: Jorge Eduardo Candelaria jorge.candelaria@ti.com Cc: Tony Lindgren tony@atomide.com --- I don't have this HW so not tested. This is omap architecture patch but I think this should go together with ASoC Multi-Component. --- arch/arm/mach-omap2/board-zoom-peripherals.c | 12 +++++++ arch/arm/mach-omap2/board-zoom2.c | 44 -------------------------- 2 files changed, 12 insertions(+), 44 deletions(-)

diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b39849..3c65304 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -24,6 +24,8 @@ #include <plat/common.h> #include <plat/usb.h>

+#include <mach/board-zoom.h> + #include "mux.h" #include "hsmmc.h"

@@ -188,6 +190,11 @@ static int zoom_twl_gpio_setup(struct device *dev, return 0; }

+/* EXTMUTE callback function */ +void zoom2_set_hs_extmute(int mute) +{ + gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); +}

static int zoom_batt_table[] = { /* 0 C*/ @@ -257,6 +264,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {

static int __init omap_i2c_init(void) { + if (machine_is_omap_zoom2()) { + zoom_audio_data.ramp_delay_value = 3; /* 161 ms */ + zoom_audio_data.hs_extmute = 1; + zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; + } omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, ARRAY_SIZE(zoom_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 86d4515..00c8f83 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -35,49 +35,6 @@ static void __init omap_zoom2_init_irq(void) omap_gpio_init(); }

-/* EXTMUTE callback function */ -void zoom2_set_hs_extmute(int mute) -{ - gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); -} - -static struct twl4030_codec_audio_data zoom2_audio_data = { - .audio_mclk = 26000000, - .ramp_delay_value = 3, /* 161 ms */ - .hs_extmute = 1, - .set_hs_extmute = zoom2_set_hs_extmute, -}; - -static struct twl4030_codec_data zoom2_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom2_audio_data, -}; - -static struct twl4030_platform_data zoom2_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .codec = &zoom2_codec_data, -}; - -static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom2_twldata, - }, -}; - -static int __init omap3_zoom2_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, - ARRAY_SIZE(zoom2_i2c_boardinfo)); - return 0; -} - - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* WLAN IRQ - GPIO 162 */ @@ -144,7 +101,6 @@ static void __init omap_zoom2_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); - omap3_zoom2_i2c_init(); board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init();