The 'phandle-array' type is a bit ambiguous. It can be either just an array of phandles or an array of phandles plus args. Many schemas for phandle-array properties aren't clear in the schema which case applies though the description usually describes it.

The array of phandles case boils down to needing:

items: maxItems: 1

The phandle plus args cases should typically take this form:

items: - items: - description: A phandle - description: 1st arg cell - description: 2nd arg cell

With this change, some examples need updating so that the bracketing of property values matches the schema.

Cc: Damien Le Moal damien.lemoal@opensource.wdc.com Cc: Herbert Xu herbert@gondor.apana.org.au Cc: "David S. Miller" davem@davemloft.net Cc: Chun-Kuang Hu chunkuang.hu@kernel.org Cc: Philipp Zabel p.zabel@pengutronix.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Cc: Vinod Koul vkoul@kernel.org Cc: Georgi Djakov djakov@kernel.org Cc: Thomas Gleixner tglx@linutronix.de Cc: Marc Zyngier maz@kernel.org Cc: Joerg Roedel joro@8bytes.org Cc: Lee Jones lee.jones@linaro.org Cc: Daniel Thompson daniel.thompson@linaro.org Cc: Jingoo Han jingoohan1@gmail.com Cc: Pavel Machek pavel@ucw.cz Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Cc: Jakub Kicinski kuba@kernel.org Cc: Wolfgang Grandegger wg@grandegger.com Cc: Marc Kleine-Budde mkl@pengutronix.de Cc: Andrew Lunn andrew@lunn.ch Cc: Vivien Didelot vivien.didelot@gmail.com Cc: Florian Fainelli f.fainelli@gmail.com Cc: Vladimir Oltean olteanv@gmail.com Cc: Kalle Valo kvalo@kernel.org Cc: Viresh Kumar vireshk@kernel.org Cc: Stephen Boyd sboyd@kernel.org Cc: Kishon Vijay Abraham I kishon@ti.com Cc: Linus Walleij linus.walleij@linaro.org Cc: "Rafael J. Wysocki" rafael@kernel.org Cc: Kevin Hilman khilman@kernel.org Cc: Ulf Hansson ulf.hansson@linaro.org Cc: Sebastian Reichel sre@kernel.org Cc: Mark Brown broonie@kernel.org Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Daniel Lezcano daniel.lezcano@linaro.org Cc: Zhang Rui rui.zhang@intel.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Thierry Reding thierry.reding@gmail.com Cc: Jonathan Hunter jonathanh@nvidia.com Cc: Sudeep Holla sudeep.holla@arm.com Cc: Geert Uytterhoeven geert+renesas@glider.be Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: dmaengine@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-leds@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-remoteproc@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring robh@kernel.org --- .../devicetree/bindings/arm/cpus.yaml | 2 + .../devicetree/bindings/arm/idle-states.yaml | 80 +++++++++---------- .../devicetree/bindings/arm/pmu.yaml | 2 + .../bindings/ata/sata_highbank.yaml | 3 + .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/crypto/intel,ixp4xx-crypto.yaml | 15 +++- .../allwinner,sun4i-a10-display-engine.yaml | 2 + .../display/mediatek/mediatek,hdmi.yaml | 5 +- .../devicetree/bindings/display/msm/gpu.yaml | 2 + .../bindings/display/renesas,du.yaml | 10 ++- .../display/rockchip/rockchip-drm.yaml | 2 + .../display/sprd/sprd,display-subsystem.yaml | 2 + .../bindings/display/ti/ti,am65x-dss.yaml | 3 +- .../devicetree/bindings/dma/dma-router.yaml | 2 + .../bindings/dma/st,stm32-dmamux.yaml | 2 +- .../bindings/dvfs/performance-domain.yaml | 1 - .../bindings/interconnect/qcom,rpmh.yaml | 2 + .../interrupt-controller/arm,gic-v3.yaml | 6 +- .../interrupt-controller/ti,sci-inta.yaml | 2 + .../bindings/iommu/mediatek,iommu.yaml | 6 +- .../bindings/iommu/renesas,ipmmu-vmsa.yaml | 6 ++ .../leds/backlight/led-backlight.yaml | 2 + .../allwinner,sun4i-a10-video-engine.yaml | 4 + .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 10 +-- .../devicetree/bindings/media/ti,cal.yaml | 4 + .../memory-controllers/mediatek,smi-larb.yaml | 2 +- .../samsung,exynos5422-dmc.yaml | 2 + .../net/allwinner,sun4i-a10-emac.yaml | 4 + .../bindings/net/can/bosch,c_can.yaml | 8 +- .../bindings/net/can/fsl,flexcan.yaml | 12 +-- .../devicetree/bindings/net/dsa/dsa-port.yaml | 2 + .../devicetree/bindings/net/fsl,fec.yaml | 8 +- .../bindings/net/intel,ixp4xx-ethernet.yaml | 15 +++- .../bindings/net/intel,ixp4xx-hss.yaml | 33 ++++++-- .../bindings/net/nxp,dwmac-imx.yaml | 4 + .../bindings/net/socionext,uniphier-ave4.yaml | 4 + .../devicetree/bindings/net/stm32-dwmac.yaml | 4 + .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 5 ++ .../bindings/net/wireless/mediatek,mt76.yaml | 4 + .../devicetree/bindings/opp/opp-v2-base.yaml | 2 + .../devicetree/bindings/perf/arm,dsu-pmu.yaml | 2 + .../bindings/phy/intel,combo-phy.yaml | 8 ++ .../devicetree/bindings/phy/ti,omap-usb2.yaml | 4 + .../pinctrl/aspeed,ast2500-pinctrl.yaml | 2 + .../bindings/pinctrl/canaan,k210-fpioa.yaml | 4 + .../pinctrl/mediatek,mt65xx-pinctrl.yaml | 2 + .../bindings/pinctrl/st,stm32-pinctrl.yaml | 10 ++- .../bindings/power/power-domain.yaml | 4 + .../bindings/power/renesas,apmu.yaml | 2 + .../power/rockchip,power-controller.yaml | 2 + .../bindings/power/supply/cw2015_battery.yaml | 6 +- .../bindings/power/supply/power-supply.yaml | 2 + .../bindings/regulator/regulator.yaml | 2 + .../bindings/regulator/st,stm32-booster.yaml | 2 +- .../bindings/remoteproc/qcom,adsp.yaml | 6 ++ .../bindings/remoteproc/st,stm32-rproc.yaml | 33 ++++++-- .../bindings/remoteproc/ti,k3-dsp-rproc.yaml | 2 + .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 2 + .../remoteproc/ti,omap-remoteproc.yaml | 19 +++-- .../bindings/soc/samsung/exynos-usi.yaml | 4 + .../bindings/sound/samsung,aries-wm8994.yaml | 2 + .../bindings/sound/samsung,midas-audio.yaml | 3 +- .../bindings/sound/st,stm32-sai.yaml | 8 +- .../thermal/thermal-cooling-devices.yaml | 6 +- .../bindings/thermal/thermal-idle.yaml | 8 +- .../bindings/usb/nvidia,tegra-xudc.yaml | 2 +- 66 files changed, 317 insertions(+), 119 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 0dcebc48ea22..916a5aebefff 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -243,6 +243,8 @@ properties:

cpu-idle-states: $ref: '/schemas/types.yaml#/definitions/phandle-array' + items: + maxItems: 1 description: | List of phandles to idle state nodes supported by this cpu (see ./idle-states.yaml). diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml index 52bce5dbb11f..4d381fa1ee57 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.yaml +++ b/Documentation/devicetree/bindings/arm/idle-states.yaml @@ -337,8 +337,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@1 { @@ -346,8 +346,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x1>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@100 { @@ -355,8 +355,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@101 { @@ -364,8 +364,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@10000 { @@ -373,8 +373,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10000>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@10001 { @@ -382,8 +382,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10001>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@10100 { @@ -391,8 +391,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@10101 { @@ -400,8 +400,8 @@ examples: compatible = "arm,cortex-a57"; reg = <0x0 0x10101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 - &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, + <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; };

cpu@100000000 { @@ -409,8 +409,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x0>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100000001 { @@ -418,8 +418,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x1>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100000100 { @@ -427,8 +427,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100000101 { @@ -436,8 +436,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100010000 { @@ -445,8 +445,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10000>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100010001 { @@ -454,8 +454,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10001>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100010100 { @@ -463,8 +463,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10100>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

cpu@100010101 { @@ -472,8 +472,8 @@ examples: compatible = "arm,cortex-a53"; reg = <0x1 0x10101>; enable-method = "psci"; - cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 - &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, + <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; };

idle-states { @@ -567,56 +567,56 @@ examples: device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; };

cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; };

cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; };

cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; - cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>; + cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; };

cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; };

cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; };

cpu@102 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; };

cpu@103 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; - cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>; + cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; };

idle-states { diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 981bac451698..2e2308d73408 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -66,6 +66,8 @@ properties:

interrupt-affinity: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: When using SPIs, specifies a list of phandles to CPU nodes corresponding directly to the affinity of diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml index ce75d77e9289..49679b58041c 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -51,6 +51,9 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 8 + items: + minItems: 2 + maxItems: 2

calxeda,tx-atten: description: | diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index 863a287ebc7e..ad313ccaaaef 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -35,7 +35,10 @@ properties: The SRAM that needs to be claimed to access the display engine bus. $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to SRAM + - description: register value for device

ranges: true

diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml index 9c53c27bd20a..e0fe63957888 100644 --- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -22,19 +22,28 @@ properties:

intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the NPE this crypto engine + - description: the NPE instance number description: phandle to the NPE this crypto engine is using, the cell describing the NPE instance to be used.

queue-rx: $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number description: phandle to the RX queue on the NPE, the cell describing the queue instance to be used.

queue-txready: $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + items: + - items: + - description: phandle to the TX READY queue on the NPE + - description: the queue instance number description: phandle to the TX READY queue on the NPE, the cell describing the queue instance to be used.

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index e77523b02fad..d4412aea7b73 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -69,6 +69,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 2 + items: + maxItems: 1 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml index 111967efa999..bdaf0b51e68c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -51,7 +51,10 @@ properties:

mediatek,syscon-hdmi: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to system configuration registers + - description: register offset in the system configuration registers description: | phandle link and register offset to the system configuration registers.

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 99a1ba3ada56..3397bc31d087 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -64,6 +64,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. phandle to the On Chip Memory (OCMEM) that's present on some a3xx and diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index 13efea574584..56cedcd6d576 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -76,17 +76,21 @@ properties:

renesas,cmms: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + maxItems: 1 description: A list of phandles to the CMM instances present in the SoC, one for each available DU channel.

renesas,vsps: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + items: + - description: phandle to VSP instance that serves the DU channel + - description: Channel index identifying the LIF instance in that VSP description: A list of phandle and channel index tuples to the VSPs that handle the - memory interfaces for the DU channels. The phandle identifies the VSP - instance that serves the DU channel, and the channel index identifies - the LIF instance in that VSP. + memory interfaces for the DU channels.

required: - compatible diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml index 7204da5eb4c5..a8d18a37cb23 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -21,6 +21,8 @@ properties:

ports: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml index 3d107e9434be..d0a5592bd89d 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml @@ -45,6 +45,8 @@ properties:

ports: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Should contain a list of phandles pointing to display interface port of DPU devices. diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 781c1868b0b8..5c7d2cbc4aac 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -88,8 +88,7 @@ properties: The DSS DPI output port node from video port 2

ti,am65x-oldi-io-ctrl: - $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + $ref: "/schemas/types.yaml#/definitions/phandle" description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index e72748496fd9..4b817f5dc30e 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -24,6 +24,8 @@ properties:

dma-masters: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Array of phandles to the DMA controllers the router can direct the signal to. diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index f751796531c9..7b1833d6caa2 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -46,7 +46,7 @@ examples: #dma-cells = <3>; dma-requests = <128>; dma-channels = <16>; - dma-masters = <&dma1 &dma2>; + dma-masters = <&dma1>, <&dma2>; clocks = <&timer_clk>; };

diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml index c8b91207f34d..7959d40ded5a 100644 --- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml +++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml @@ -43,7 +43,6 @@ properties:

performance-domains: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 description: A phandle and performance domain specifier as defined by bindings of the performance controller/provider specified by phandle. diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cbb24f9bb609..5a911be0c2ea 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -121,6 +121,8 @@ properties:

qcom,bcm-voters: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | List of phandles to qcom,bcm-voter nodes that are required by this interconnect to send RPMh commands. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index cfb3ec27bd2b..b7197f78e158 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -138,6 +138,8 @@ properties: properties: affinity: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Should be a list of phandles to CPU nodes (as described in Documentation/devicetree/bindings/arm/cpus.yaml). @@ -273,11 +275,11 @@ examples:

ppi-partitions { part0: interrupt-partition-0 { - affinity = <&cpu0 &cpu2>; + affinity = <&cpu0>, <&cpu2>; };

part1: interrupt-partition-1 { - affinity = <&cpu1 &cpu3>; + affinity = <&cpu1>, <&cpu3>; }; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index 3d89668573e8..88c46e61732e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -77,6 +77,8 @@ properties:

ti,unmapped-event-sources: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Array of phandles to DMA controllers where the unmapped events originate.

diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml index 0f26fe14c8e2..97e8c471a5e8 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -101,6 +101,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 32 + items: + maxItems: 1 description: | List of phandle to the local arbiters in the current Socs. Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort @@ -167,8 +169,8 @@ examples: interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb4 &larb5>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; };

diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index ce0c715205c6..507853fcc746 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -66,6 +66,12 @@ properties:

renesas,ipmmu-main: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to main IPMMU + - description: the interrupt bit number associated with the particular + cache IPMMU device. The interrupt bit number needs to match the main + IPMMU IMSSTR register. Only used by cache IPMMU instances. description: Reference to the main IPMMU phandle plus 1 cell. The cell is the interrupt bit number associated with the particular cache IPMMU diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml index 625082bf3892..f5822f4ea667 100644 --- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml @@ -23,6 +23,8 @@ properties: leds: description: A list of LED nodes $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1

brightness-levels: description: diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml index c3de96d10396..ee7fc3515d89 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -48,6 +48,10 @@ properties:

allwinner,sram: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device description: Phandle to the device SRAM

iommus: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml index 9c04fa85ee5c..d13c9233a7c8 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml @@ -58,11 +58,11 @@ properties: req_gpr is the gpr register offset of RX_ENABLE for the mipi phy. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset containing - CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. - maximum: 0xff + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset containing + CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. + maximum: 0xff

interconnects: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index 66c5d392fa75..7e078424ca4d 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -48,6 +48,10 @@ properties:

ti,camerrx-control: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to device control module + - description: offset to the control_camerarx_core register description: phandle to the device control module and offset to the control_camerarx_core register diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index eaeff1ada7f8..822ade9e9bab 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -52,7 +52,7 @@ properties: maxItems: 1

mediatek,smi: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: a phandle to the smi_common node.

mediatek,larb-id: diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml index fe8639dcffab..895c3b5c9aaa 100644 --- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -45,6 +45,8 @@ properties: $ref: '/schemas/types.yaml#/definitions/phandle-array' minItems: 1 maxItems: 16 + items: + maxItems: 1 description: phandles of the PPMU events used by the controller.

device-handle: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index 8d8560a67abf..098b2bf7d976 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -29,6 +29,10 @@ properties: allwinner,sram: description: Phandle to the device SRAM $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device

required: - compatible diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml index 2cd145a642f1..8bad328b184d 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -56,10 +56,10 @@ properties: offset). $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The phandle to the system control region. - - description: The register offset. - - description: The CAN instance number. + - items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number.

resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 3f0ee17c1461..e52db841bb8c 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -84,12 +84,12 @@ properties: req_bit is the bit offset of CAN stop request. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset of CAN stop request. - maximum: 0xff - - description: The 'req_bit' is the bit offset of CAN stop request. - maximum: 0x1f + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f

fsl,clk-source: description: | diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml index 702df848a71d..c504feeec6db 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -34,6 +34,8 @@ properties: full routing information must be given, not just the one hop routes to neighbouring switches $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1

ethernet: description: diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index fd8371e31867..daa2f79a294f 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -158,11 +158,13 @@ properties:

fsl,stop-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to general purpose register node + - description: the gpr register offset for ENET stop request + - description: the gpr bit offset for ENET stop request description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>. - gpr is the phandle to general purpose register node. - req_gpr is the gpr register offset for ENET stop request. - req_bit is the gpr bit offset for ENET stop request.

mdio: $ref: mdio.yaml# diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 67eaf02dda80..4e1b79818aff 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -29,12 +29,18 @@ properties:

queue-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue node + - description: RX queue instance to use description: phandle to the RX queue on the NPE

queue-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX READY queue node + - description: TX READY queue instance to use description: phandle to the TX READY queue on the NPE

phy-mode: true @@ -43,7 +49,10 @@ properties:

intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the NPE this ethernet instance is using + - description: the NPE instance to use description: phandle to the NPE this ethernet instance is using and the instance to use in the second cell

diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml index 4dcd53c3e0b4..e6329febb60c 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -25,39 +25,62 @@ properties:

intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + items: + - description: phandle to the NPE this HSS instance is using + - description: the NPE instance number description: phandle to the NPE this HSS instance is using and the instance to use in the second cell

intel,queue-chl-rxtrig: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX trigger queue on the NPE + - description: the queue instance number description: phandle to the RX trigger queue on the NPE

intel,queue-chl-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX ready queue on the NPE + - description: the queue instance number description: phandle to the TX ready queue on the NPE

intel,queue-pkt-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number description: phandle to the packet RX queue on the NPE

intel,queue-pkt-tx: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the TX queue on the NPE + - description: the queue instance number description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE

intel,queue-pkt-rxfree: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the RXFREE queue on the NPE + - description: the queue instance number description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and RXFREE3 queues on the NPE

intel,queue-pkt-txdone: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TXDONE queue on the NPE + - description: the queue instance number description: phandle to the packet TXDONE queue on the NPE

cts-gpios: diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index ee4afe361fac..011363166789 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -54,6 +54,10 @@ properties:

intf_mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the GPR syscon + - description: the offset of the GPR register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the GPR register, and the offset of the GPR register. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index aad5a9f3f962..1ab41cfdb865 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -66,6 +66,10 @@ properties:

socionext,syscon-phy-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: ID of MAC instance description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 3d8a3b763ae6..89a858de68af 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -74,6 +74,10 @@ properties:

st,syscon: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 4b97a0f1175b..c6596fad5b20 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -136,6 +136,11 @@ properties:

ti,syscon-efuse: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the system control device node which + provides access to efuse + - description: offset to efuse registers??? description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 269cd63fb544..42e1f4dddca8 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -54,6 +54,10 @@ properties:

mediatek,mtd-eeprom: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to MTD partition + - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 15a76bcd6d42..da0f09eedc0c 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -177,6 +177,8 @@ patternProperties: for the functioning of the current device at the current OPP (where this property is present). $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1

patternProperties: '^opp-microvolt-': diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml index aef63a542f34..c87821be158b 100644 --- a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml +++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml @@ -35,6 +35,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 12 + items: + maxItems: 1 description: List of phandles for the CPUs connected to this DSU instance.

required: diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml index 347d0cdfb80d..5d54b0a0e873 100644 --- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -47,10 +47,18 @@ properties:

intel,syscfg: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to Chip configuration registers + - description: ComboPhy instance id description: Chip configuration registers handle and ComboPhy instance id

intel,hsio: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to HSIO registers + - description: ComboPhy instance id description: HSIO registers handle and ComboPhy instance id on NOC

intel,aggregation: diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index cbbf5e8b1197..51c8a36e61f0 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -45,6 +45,10 @@ properties:

syscon-phy-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the system control module + - description: register offset to power on/off the PHY description: phandle/offset pair. Phandle to the system control module and register offset to power on/off the PHY. diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index d316cc082107..acd60c85b4cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,6 +29,8 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 + items: + maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle-array description: | A cell of phandles to external controller nodes: diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index a44691d9c57d..53e963e090f2 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -39,6 +39,10 @@ properties:

canaan,k210-sysctl-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of the K210 system controller node + - description: offset of its power domain control register description: | phandle of the K210 system controller node and offset of its power domain control register. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 6953c958ff7c..161088a8be33 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -44,6 +44,8 @@ properties:

mediatek,pctl-regmap: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 minItems: 1 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 83a18d0331b1..335ffc1353b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -41,11 +41,13 @@ properties: maxItems: 1

st,syscfg: - description: Should be phandle/offset/mask - - Phandle to the syscon node which includes IRQ mux selection. - - The offset of the IRQ mux selection register. - - The field mask of IRQ mux, needed if different of 0xf. + description: Phandle+args to the syscon node which includes IRQ mux selection. $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: syscon node which includes IRQ mux selection + - description: The offset of the IRQ mux selection register + - description: The field mask of IRQ mux, needed if different of 0xf

st,package: description: diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 3143ed9a3313..889091b9814f 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -29,6 +29,8 @@ properties:

domain-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Phandles of idle states that defines the available states for the power-domain provider. The idle state definitions are compatible with the @@ -42,6 +44,8 @@ properties:

operating-points-v2: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: Phandles to the OPP tables of power domains provided by a power domain provider. If the provider provides a single power domain only or all diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml index 391897d897f2..4d293b2b2f84 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -35,6 +35,8 @@ properties:

cpus: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Array of phandles pointing to CPU cores, which should match the order of CPU cores used by the WUPCR and PSTR registers in the Advanced Power diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index 9b9d71087466..3deb0fc8dfd3 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -129,6 +129,8 @@ $defs:

pm_qos: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | A number of phandles to qos blocks which need to be saved and restored while power domain switches state. diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index c73abb2ff513..2dda91587dc3 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -14,6 +14,9 @@ description: | phandle in monitored-battery. If specified the driver uses the charge-full-design-microamp-hours property of the battery.

+allOf: + - $ref: power-supply.yaml# + properties: compatible: const: cellwise,cw2015 @@ -37,9 +40,6 @@ properties: minimum: 250

power-supplies: - description: - Specifies supplies used for charging the battery connected to this gauge - $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 8 # Should be enough

diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 259760167759..531b67225c74 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -12,6 +12,8 @@ maintainers: properties: power-supplies: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: This property is added to a supply in order to list the devices which supply it power, referenced by their phandles. diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index ed560ee8714e..a9b66ececccf 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -213,6 +213,8 @@ properties: is 2-way - all coupled regulators should be linked with each other. A regulator should not be coupled with its supplier. $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + maxItems: 1

regulator-coupled-max-spread: description: Array of maximum spread between voltages of coupled regulators diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index df0191b1ceba..38bdaef4fa39 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,7 +23,7 @@ properties: - st,stm32mp1-booster

st,syscfg: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle" description: phandle to system configuration controller.

vdda-supply: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index c635c181d2c2..bcad8f4080d4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -115,6 +115,12 @@ properties:

qcom,halt-regs: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offsets within syscon for q6 halt registers + - description: offsets within syscon for modem halt registers + - description: offsets within syscon for nc halt registers description: Phandle reference to a syscon representing TCSR followed by the three offsets within syscon for q6, modem and nc halt registers. diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index b587c97c282b..be3d9b0e876b 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -29,17 +29,22 @@ properties:

st,syscfg-holdboot: description: remote processor reset hold boot - - Phandle of syscon block. - - The offset of the hold boot setting register. - - The field mask of the hold boot. $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: The offset of the hold boot setting register + - description: The field mask of the hold boot

st,syscfg-tz: description: Reference to the system configuration which holds the RCC trust zone mode $ref: "/schemas/types.yaml#/definitions/phandle-array" - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: FIXME + - description: FIXME

interrupts: description: Should contain the WWDG1 watchdog reset interrupt @@ -93,20 +98,32 @@ properties: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote - maxItems: 1 + items: + - items: + - description: Phandle of syscon block + - description: FIXME + - description: FIXME

st,syscfg-m4-state: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the tamp register which exposes the Cortex-M4 state. - maxItems: 1 + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: FIXME + - description: FIXME

st,syscfg-rsc-tbl: $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the tamp register which references the Cortex-M4 resource table address. - maxItems: 1 + items: + - items: + - description: Phandle of syscon block with the tamp register + - description: FIXME + - description: FIXME

st,auto-boot: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 7b56497eec4d..4323cefdf19b 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -79,6 +79,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. The regions should be defined as child nodes of the respective SRAM node, and diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index d9c7e8c2b268..0f2bb06cb7b4 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -189,6 +189,8 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. The regions should be defined as child nodes of the respective SRAM node, and diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index c6c12129d6b7..1fdc2741c36e 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -123,13 +123,14 @@ properties:

ti,bootreg: $ref: /schemas/types.yaml#/definitions/phandle-array - description: | - Should be a triple of the phandle to the System Control - Configuration region that contains the boot address - register, the register offset of the boot address - register within the System Control module, and the bit - shift within the register. This property is required for - all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs. + items: + - items: + - description: phandle to the System Control Configuration region + - description: register offset of the boot address register + - description: the bit shift within the register + description: + This property is required for all the DSP instances on OMAP4, OMAP5 + and DRA7xx SoCs.

ti,autosuspend-delay-ms: description: | @@ -140,6 +141,8 @@ properties:

ti,timers: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | One or more phandles to OMAP DMTimer nodes, that serve as System/Tick timers for the OS running on the remote @@ -156,6 +159,8 @@ properties:

ti,watchdog-timers: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | One or more phandles to OMAP DMTimer nodes, used to serve as Watchdog timers for the processor cores. This diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 273f2d95a043..58f2e9d8bb0e 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -48,6 +48,10 @@ properties:

samsung,sysreg: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register syscon node + - description: offset of SW_CONF register for this USI controller description: Should be phandle/offset pair. The phandle to System Register syscon node (for the same domain where this USI controller resides) and the offset diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index 5fff586dc802..eb487ed3ca3b 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -27,6 +27,8 @@ properties: sound-dai: minItems: 2 maxItems: 2 + items: + maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle-array description: | phandles to the I2S controller and bluetooth codec, diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 095775c598fa..3a4df2ce1728 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -21,8 +21,7 @@ properties: type: object properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle-array - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the I2S controller required: - sound-dai diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 1538d11ce9a8..d4fc8fdcb72f 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -102,9 +102,11 @@ patternProperties: By default SAI sub-block is in asynchronous mode. Must contain the phandle and index of the SAI sub-block providing the synchronization. - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of the SAI sub-block + - description: index of the SAI sub-block

st,iec60958: description: diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index f004779ba9b3..850a9841b110 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -66,9 +66,9 @@ examples: compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0>, + <&LITTLE_CPU_SLEEP_1>, + <&CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index 6278ccf16f3f..cc938d7ad1f3 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -37,8 +37,8 @@ properties:

exit-latency-us: description: | - The exit latency constraint in microsecond for the injected idle state - for the device. It is the latency constraint to apply when selecting an + The exit latency constraint in microsecond for the injected idle state + for the device. It is the latency constraint to apply when selecting an idle state from among all the present ones.

required: @@ -65,7 +65,7 @@ examples: capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <436>; #cooling-cells = <2>; /* min followed by max */ - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>; thermal-idle { #cooling-cells = <2>; duration-us = <10000>; @@ -81,7 +81,7 @@ examples: capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <436>; #cooling-cells = <2>; /* min followed by max */ - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>; thermal-idle { #cooling-cells = <2>; duration-us = <10000>; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index a39c76b89484..fd6e7c81426e 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -83,7 +83,7 @@ properties: - const: ss

nvidia,xusb-padctl: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the XUSB pad controller that is used to configure the USB pads used by the XUDC controller.