[PATCH 0/8] ASoC: Intel: Skylake: Fix HDAudio and DMIC for v5.4
First six of the backport address numerous problems troubling HDAudio configuration users for Skylake driver. Upstream series: "ASoC: Intel: Skylake: Fix HDaudio and Dmic" [1] provides the explanation and reasoning behind it. These have been initialy pushed into v5.7-rc1 via: "sound updates for 5.7-rc1" [2] by Takashi.
Last two patches are from: "Add support for different DMIC configurations" [3] which focuses on HDAudio with DMIC configuration. Patch: "ASoC: Intel: Skylake: Add alternative topology binary name" of the mentioned series has already been merged to v5.4.y -stable and thus it's not included here.
Fixes target mainly Skylake and Kabylake based platforms, released in 2015-2016 period.
[1]: https://lore.kernel.org/alsa-devel/20200305145314.32579-1-cezary.rojewski@in... [2]: https://lore.kernel.org/lkml/s5htv22uso8.wl-tiwai@suse.de/ [3]: https://lore.kernel.org/alsa-devel/20200427132727.24942-1-mateusz.gorski@lin...
Cezary Rojewski (6): ASoC: Intel: Skylake: Remove superfluous chip initialization ASoC: Intel: Skylake: Select hda configuration permissively ASoC: Intel: Skylake: Enable codec wakeup during chip init ASoC: Intel: Skylake: Shield against no-NHLT configurations ASoC: Intel: Allow for ROM init retry on CNL platforms ASoC: Intel: Skylake: Await purge request ack on CNL
Mateusz Gorski (2): ASoC: Intel: Multiple I/O PCM format support for pipe ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT
include/uapi/sound/skl-tplg-interface.h | 2 + sound/soc/intel/skylake/bxt-sst.c | 3 - sound/soc/intel/skylake/cnl-sst.c | 35 ++++-- sound/soc/intel/skylake/skl-nhlt.c | 3 +- sound/soc/intel/skylake/skl-sst-dsp.h | 2 + sound/soc/intel/skylake/skl-topology.c | 159 +++++++++++++++++++++++- sound/soc/intel/skylake/skl-topology.h | 1 + sound/soc/intel/skylake/skl.c | 29 ++--- 8 files changed, 204 insertions(+), 30 deletions(-)
commit 2ef81057d80456870b97890dd79c8f56a85b1242 upstream.
Skylake driver does the controller init operation twice: - first during probe (only to stop it just before scheduling probe_work) - and during said probe_work where the actual correct sequence is executed
To properly complete boot sequence when iDisp codec is present, bus initialization has to be called only after _i915_init() finishes. With additional _reset_list preceding _i915_init(), iDisp codec never gets the chance to enumerate on the link. Remove the superfluous initialization to address the issue.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/skl.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 141dbbf975ac..861c07417fed 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -807,6 +807,9 @@ static void skl_probe_work(struct work_struct *work) return; }
+ skl_init_pci(skl); + skl_dum_set(bus); + err = skl_init_chip(bus, true); if (err < 0) { dev_err(bus->dev, "Init chip failed with err: %d\n", err); @@ -922,8 +925,6 @@ static int skl_first_init(struct hdac_bus *bus) return -ENXIO; }
- snd_hdac_bus_reset_link(bus, true); - snd_hdac_bus_parse_capabilities(bus);
/* check if PPCAP exists */ @@ -971,11 +972,7 @@ static int skl_first_init(struct hdac_bus *bus) if (err < 0) return err;
- /* initialize chip */ - skl_init_pci(skl); - skl_dum_set(bus); - - return skl_init_chip(bus, true); + return 0; }
static int skl_probe(struct pci_dev *pci, @@ -1080,8 +1077,6 @@ static int skl_probe(struct pci_dev *pci, if (bus->mlcap) snd_hdac_ext_bus_get_ml_capabilities(bus);
- snd_hdac_bus_stop_chip(bus); - /* create device for soc dmic */ err = skl_dmic_device_register(skl); if (err < 0) {
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Remove superfluous chip initialization
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-remove-superfluous-chip-initialization.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:41 +0100 Subject: ASoC: Intel: Skylake: Remove superfluous chip initialization To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-2-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit 2ef81057d80456870b97890dd79c8f56a85b1242 upstream.
Skylake driver does the controller init operation twice: - first during probe (only to stop it just before scheduling probe_work) - and during said probe_work where the actual correct sequence is executed
To properly complete boot sequence when iDisp codec is present, bus initialization has to be called only after _i915_init() finishes. With additional _reset_list preceding _i915_init(), iDisp codec never gets the chance to enumerate on the link. Remove the superfluous initialization to address the issue.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/skl.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
--- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -807,6 +807,9 @@ static void skl_probe_work(struct work_s return; }
+ skl_init_pci(skl); + skl_dum_set(bus); + err = skl_init_chip(bus, true); if (err < 0) { dev_err(bus->dev, "Init chip failed with err: %d\n", err); @@ -922,8 +925,6 @@ static int skl_first_init(struct hdac_bu return -ENXIO; }
- snd_hdac_bus_reset_link(bus, true); - snd_hdac_bus_parse_capabilities(bus);
/* check if PPCAP exists */ @@ -971,11 +972,7 @@ static int skl_first_init(struct hdac_bu if (err < 0) return err;
- /* initialize chip */ - skl_init_pci(skl); - skl_dum_set(bus); - - return skl_init_chip(bus, true); + return 0; }
static int skl_probe(struct pci_dev *pci, @@ -1080,8 +1077,6 @@ static int skl_probe(struct pci_dev *pci if (bus->mlcap) snd_hdac_ext_bus_get_ml_capabilities(bus);
- snd_hdac_bus_stop_chip(bus); - /* create device for soc dmic */ err = skl_dmic_device_register(skl); if (err < 0) {
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
commit a66f88394a78fec9a05fa6e517e9603e8eca8363 upstream.
With _reset_link removed from the probe sequence, codec_mask at the time skl_find_hda_machine() is invoked will always be 0, so hda machine will never be chosen. Rather than reorganizing boot flow, be permissive about invalid mask. codec_mask will be set to proper value during probe_work - before skl_codec_create() ever gets called.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/skl.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 861c07417fed..f46b90ccb46f 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -480,13 +480,8 @@ static struct skl_ssp_clk skl_ssp_clks[] = { static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl_dev *skl, struct snd_soc_acpi_mach *machines) { - struct hdac_bus *bus = skl_to_bus(skl); struct snd_soc_acpi_mach *mach;
- /* check if we have any codecs detected on bus */ - if (bus->codec_mask == 0) - return NULL; - /* point to common table */ mach = snd_soc_acpi_intel_hda_machines;
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Select hda configuration permissively
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-select-hda-configuration-permissively.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:42 +0100 Subject: ASoC: Intel: Skylake: Select hda configuration permissively To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-3-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit a66f88394a78fec9a05fa6e517e9603e8eca8363 upstream.
With _reset_link removed from the probe sequence, codec_mask at the time skl_find_hda_machine() is invoked will always be 0, so hda machine will never be chosen. Rather than reorganizing boot flow, be permissive about invalid mask. codec_mask will be set to proper value during probe_work - before skl_codec_create() ever gets called.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/skl.c | 5 ----- 1 file changed, 5 deletions(-)
--- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -480,13 +480,8 @@ static struct skl_ssp_clk skl_ssp_clks[] static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl_dev *skl, struct snd_soc_acpi_mach *machines) { - struct hdac_bus *bus = skl_to_bus(skl); struct snd_soc_acpi_mach *mach;
- /* check if we have any codecs detected on bus */ - if (bus->codec_mask == 0) - return NULL; - /* point to common table */ mach = snd_soc_acpi_intel_hda_machines;
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
commit e603f11d5df8997d104ab405ff27640b90baffaa upstream.
Follow the recommendation set by hda_intel.c and enable HDMI/DP codec wakeup during bus initialization procedure. Disable wakeup once init completes.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/skl.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index f46b90ccb46f..1a3a3d6a3141 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -129,6 +129,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset) struct hdac_ext_link *hlink; int ret;
+ snd_hdac_set_codec_wakeup(bus, true); skl_enable_miscbdcge(bus->dev, false); ret = snd_hdac_bus_init_chip(bus, full_reset);
@@ -137,6 +138,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset) writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV);
skl_enable_miscbdcge(bus->dev, true); + snd_hdac_set_codec_wakeup(bus, false);
return ret; }
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Enable codec wakeup during chip init
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:43 +0100 Subject: ASoC: Intel: Skylake: Enable codec wakeup during chip init To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-4-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit e603f11d5df8997d104ab405ff27640b90baffaa upstream.
Follow the recommendation set by hda_intel.c and enable HDMI/DP codec wakeup during bus initialization procedure. Disable wakeup once init completes.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/skl.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -129,6 +129,7 @@ static int skl_init_chip(struct hdac_bus struct hdac_ext_link *hlink; int ret;
+ snd_hdac_set_codec_wakeup(bus, true); skl_enable_miscbdcge(bus->dev, false); ret = snd_hdac_bus_init_chip(bus, full_reset);
@@ -137,6 +138,7 @@ static int skl_init_chip(struct hdac_bus writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV);
skl_enable_miscbdcge(bus->dev, true); + snd_hdac_set_codec_wakeup(bus, false);
return ret; }
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
commit 9e6c382f5a6161eb55115fb56614b9827f2e7da3 upstream.
Some configurations expose no NHLT table at all within their /sys/firmware/acpi/tables. To prevent NULL-dereference errors from occurring, adjust probe flow and append additional safety checks in functions involved in NHLT lifecycle.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/skl-nhlt.c | 3 ++- sound/soc/intel/skylake/skl.c | 9 +++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index 19f328d71f24..d9c8f5cb389e 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -182,7 +182,8 @@ void skl_nhlt_remove_sysfs(struct skl_dev *skl) { struct device *dev = &skl->pci->dev;
- sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); + if (skl->nhlt) + sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); }
/* diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 1a3a3d6a3141..2e5fbd220923 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -632,6 +632,9 @@ static int skl_clock_device_register(struct skl_dev *skl) struct platform_device_info pdevinfo = {NULL}; struct skl_clk_pdata *clk_pdata;
+ if (!skl->nhlt) + return 0; + clk_pdata = devm_kzalloc(&skl->pci->dev, sizeof(*clk_pdata), GFP_KERNEL); if (!clk_pdata) @@ -1090,7 +1093,8 @@ static int skl_probe(struct pci_dev *pci, out_clk_free: skl_clock_device_unregister(skl); out_nhlt_free: - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); out_free: skl_free(bus);
@@ -1139,7 +1143,8 @@ static void skl_remove(struct pci_dev *pci) skl_dmic_device_unregister(skl); skl_clock_device_unregister(skl); skl_nhlt_remove_sysfs(skl); - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); skl_free(bus); dev_set_drvdata(&pci->dev, NULL); }
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Shield against no-NHLT configurations
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-shield-against-no-nhlt-configurations.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:44 +0100 Subject: ASoC: Intel: Skylake: Shield against no-NHLT configurations To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-5-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit 9e6c382f5a6161eb55115fb56614b9827f2e7da3 upstream.
Some configurations expose no NHLT table at all within their /sys/firmware/acpi/tables. To prevent NULL-dereference errors from occurring, adjust probe flow and append additional safety checks in functions involved in NHLT lifecycle.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/skl-nhlt.c | 3 ++- sound/soc/intel/skylake/skl.c | 9 +++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
--- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -182,7 +182,8 @@ void skl_nhlt_remove_sysfs(struct skl_de { struct device *dev = &skl->pci->dev;
- sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); + if (skl->nhlt) + sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); }
/* --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -632,6 +632,9 @@ static int skl_clock_device_register(str struct platform_device_info pdevinfo = {NULL}; struct skl_clk_pdata *clk_pdata;
+ if (!skl->nhlt) + return 0; + clk_pdata = devm_kzalloc(&skl->pci->dev, sizeof(*clk_pdata), GFP_KERNEL); if (!clk_pdata) @@ -1090,7 +1093,8 @@ out_dsp_free: out_clk_free: skl_clock_device_unregister(skl); out_nhlt_free: - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); out_free: skl_free(bus);
@@ -1139,7 +1143,8 @@ static void skl_remove(struct pci_dev *p skl_dmic_device_unregister(skl); skl_clock_device_unregister(skl); skl_nhlt_remove_sysfs(skl); - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); skl_free(bus); dev_set_drvdata(&pci->dev, NULL); }
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
commit 024aa45f55ccd40704cfdef61b2a8b6d0de9cdd1 upstream.
Due to unconditional initial timeouts, firmware may fail to load during its initialization. This issue cannot be resolved on driver side as it is caused by external sources such as CSME but has to be accounted for nonetheless.
Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/bxt-sst.c | 2 -- sound/soc/intel/skylake/cnl-sst.c | 15 ++++++++++----- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 92a82e6b5fe6..cdafade8abd6 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -38,8 +38,6 @@ /* Delay before scheduling D0i3 entry */ #define BXT_D0I3_DELAY 5000
-#define BXT_FW_ROM_INIT_RETRY 3 - static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); diff --git a/sound/soc/intel/skylake/cnl-sst.c b/sound/soc/intel/skylake/cnl-sst.c index 4f64f097e9ae..060e47ae3391 100644 --- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -109,7 +109,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) { struct firmware stripped_fw; struct skl_dev *cnl = ctx->thread_context; - int ret; + int ret, i;
if (!ctx->fw) { ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); @@ -131,12 +131,16 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) stripped_fw.size = ctx->fw->size; skl_dsp_strip_extended_manifest(&stripped_fw);
- ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - if (ret < 0) { - dev_err(ctx->dev, "prepare firmware failed: %d\n", ret); - goto cnl_load_base_firmware_failed; + for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { + ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); + if (!ret) + break; + dev_dbg(ctx->dev, "prepare firmware failed: %d\n", ret); }
+ if (ret < 0) + goto cnl_load_base_firmware_failed; + ret = sst_transfer_fw_host_dma(ctx); if (ret < 0) { dev_err(ctx->dev, "transfer firmware failed: %d\n", ret); @@ -158,6 +162,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) return 0;
cnl_load_base_firmware_failed: + dev_err(ctx->dev, "firmware load failed: %d\n", ret); release_firmware(ctx->fw); ctx->fw = NULL;
diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index cdfec0fca577..067d1ea11cde 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -67,6 +67,7 @@ struct skl_dev;
#define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf +#define BXT_FW_ROM_INIT_RETRY 3
#define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Allow for ROM init retry on CNL platforms
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:45 +0100 Subject: ASoC: Intel: Allow for ROM init retry on CNL platforms To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-6-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit 024aa45f55ccd40704cfdef61b2a8b6d0de9cdd1 upstream.
Due to unconditional initial timeouts, firmware may fail to load during its initialization. This issue cannot be resolved on driver side as it is caused by external sources such as CSME but has to be accounted for nonetheless.
Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/bxt-sst.c | 2 -- sound/soc/intel/skylake/cnl-sst.c | 15 ++++++++++----- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 11 insertions(+), 7 deletions(-)
--- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -38,8 +38,6 @@ /* Delay before scheduling D0i3 entry */ #define BXT_D0I3_DELAY 5000
-#define BXT_FW_ROM_INIT_RETRY 3 - static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); --- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -109,7 +109,7 @@ static int cnl_load_base_firmware(struct { struct firmware stripped_fw; struct skl_dev *cnl = ctx->thread_context; - int ret; + int ret, i;
if (!ctx->fw) { ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); @@ -131,12 +131,16 @@ static int cnl_load_base_firmware(struct stripped_fw.size = ctx->fw->size; skl_dsp_strip_extended_manifest(&stripped_fw);
- ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - if (ret < 0) { - dev_err(ctx->dev, "prepare firmware failed: %d\n", ret); - goto cnl_load_base_firmware_failed; + for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { + ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); + if (!ret) + break; + dev_dbg(ctx->dev, "prepare firmware failed: %d\n", ret); }
+ if (ret < 0) + goto cnl_load_base_firmware_failed; + ret = sst_transfer_fw_host_dma(ctx); if (ret < 0) { dev_err(ctx->dev, "transfer firmware failed: %d\n", ret); @@ -158,6 +162,7 @@ static int cnl_load_base_firmware(struct return 0;
cnl_load_base_firmware_failed: + dev_err(ctx->dev, "firmware load failed: %d\n", ret); release_firmware(ctx->fw); ctx->fw = NULL;
--- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -67,6 +67,7 @@ struct skl_dev;
#define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf +#define BXT_FW_ROM_INIT_RETRY 3
#define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
commit 7693cadac86548b30389a6e11d78c38db654f393 upstream.
Each purge request is sent by driver after master core is powered up and unresetted but before it is unstalled. On unstall, ROM begins processing the request and initializing environment for FW load. Host should await ROM's ack before moving forward. Without doing so, ROM init poll may start too early and false timeouts can occur.
Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- sound/soc/intel/skylake/bxt-sst.c | 1 - sound/soc/intel/skylake/cnl-sst.c | 20 ++++++++++++++++++-- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index cdafade8abd6..38b9d7494083 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -17,7 +17,6 @@ #include "skl.h"
#define BXT_BASEFW_TIMEOUT 3000 -#define BXT_INIT_TIMEOUT 300 #define BXT_ROM_INIT_TIMEOUT 70 #define BXT_IPC_PURGE_FW 0x01004000
diff --git a/sound/soc/intel/skylake/cnl-sst.c b/sound/soc/intel/skylake/cnl-sst.c index 060e47ae3391..c6abcd5aa67b 100644 --- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -57,18 +57,34 @@ static int cnl_prepare_fw(struct sst_dsp *ctx, const void *fwdata, u32 fwsize) ctx->dsp_ops.stream_tag = stream_tag; memcpy(ctx->dmab.area, fwdata, fwsize);
+ ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK); + if (ret < 0) { + dev_err(ctx->dev, "dsp core0 power up failed\n"); + ret = -EIO; + goto base_fw_load_failed; + } + /* purge FW request */ sst_dsp_shim_write(ctx, CNL_ADSP_REG_HIPCIDR, CNL_ADSP_REG_HIPCIDR_BUSY | (CNL_IPC_PURGE | ((stream_tag - 1) << CNL_ROM_CTRL_DMA_ID)));
- ret = cnl_dsp_enable_core(ctx, SKL_DSP_CORE0_MASK); + ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK); if (ret < 0) { - dev_err(ctx->dev, "dsp boot core failed ret: %d\n", ret); + dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret); ret = -EIO; goto base_fw_load_failed; }
+ ret = sst_dsp_register_poll(ctx, CNL_ADSP_REG_HIPCIDA, + CNL_ADSP_REG_HIPCIDA_DONE, + CNL_ADSP_REG_HIPCIDA_DONE, + BXT_INIT_TIMEOUT, "HIPCIDA Done"); + if (ret < 0) { + dev_err(ctx->dev, "timeout for purge request: %d\n", ret); + goto base_fw_load_failed; + } + /* enable interrupt */ cnl_ipc_int_enable(ctx); cnl_ipc_op_int_enable(ctx); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 067d1ea11cde..1df9ef422f61 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -68,6 +68,7 @@ struct skl_dev; #define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf #define BXT_FW_ROM_INIT_RETRY 3 +#define BXT_INIT_TIMEOUT 300
#define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Await purge request ack on CNL
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-await-purge-request-ack-on-cnl.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:46 +0100 Subject: ASoC: Intel: Skylake: Await purge request ack on CNL To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Cezary Rojewski cezary.rojewski@intel.com Message-ID: 20201129114148.13772-7-cezary.rojewski@intel.com
From: Cezary Rojewski cezary.rojewski@intel.com
commit 7693cadac86548b30389a6e11d78c38db654f393 upstream.
Each purge request is sent by driver after master core is powered up and unresetted but before it is unstalled. On unstall, ROM begins processing the request and initializing environment for FW load. Host should await ROM's ack before moving forward. Without doing so, ROM init poll may start too early and false timeouts can occur.
Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/skylake/bxt-sst.c | 1 - sound/soc/intel/skylake/cnl-sst.c | 20 ++++++++++++++++++-- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 19 insertions(+), 3 deletions(-)
--- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -17,7 +17,6 @@ #include "skl.h"
#define BXT_BASEFW_TIMEOUT 3000 -#define BXT_INIT_TIMEOUT 300 #define BXT_ROM_INIT_TIMEOUT 70 #define BXT_IPC_PURGE_FW 0x01004000
--- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -57,18 +57,34 @@ static int cnl_prepare_fw(struct sst_dsp ctx->dsp_ops.stream_tag = stream_tag; memcpy(ctx->dmab.area, fwdata, fwsize);
+ ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK); + if (ret < 0) { + dev_err(ctx->dev, "dsp core0 power up failed\n"); + ret = -EIO; + goto base_fw_load_failed; + } + /* purge FW request */ sst_dsp_shim_write(ctx, CNL_ADSP_REG_HIPCIDR, CNL_ADSP_REG_HIPCIDR_BUSY | (CNL_IPC_PURGE | ((stream_tag - 1) << CNL_ROM_CTRL_DMA_ID)));
- ret = cnl_dsp_enable_core(ctx, SKL_DSP_CORE0_MASK); + ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK); if (ret < 0) { - dev_err(ctx->dev, "dsp boot core failed ret: %d\n", ret); + dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret); ret = -EIO; goto base_fw_load_failed; }
+ ret = sst_dsp_register_poll(ctx, CNL_ADSP_REG_HIPCIDA, + CNL_ADSP_REG_HIPCIDA_DONE, + CNL_ADSP_REG_HIPCIDA_DONE, + BXT_INIT_TIMEOUT, "HIPCIDA Done"); + if (ret < 0) { + dev_err(ctx->dev, "timeout for purge request: %d\n", ret); + goto base_fw_load_failed; + } + /* enable interrupt */ cnl_ipc_int_enable(ctx); cnl_ipc_op_int_enable(ctx); --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -68,6 +68,7 @@ struct skl_dev; #define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf #define BXT_FW_ROM_INIT_RETRY 3 +#define BXT_INIT_TIMEOUT 300
#define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
From: Mateusz Gorski mateusz.gorski@linux.intel.com
commit 1b450791d517d4d6666ab9ab6d9a20c8819e3572 upstream.
For pipes supporting multiple input/output formats, kcontrol is created and selection of pipe input and output configuration is done based on control set.
If more than one configuration is supported, then this patch allows user to select configuration of choice using amixer settings.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Signed-off-by: Pavan K S pavan.k.s@intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- include/uapi/sound/skl-tplg-interface.h | 1 + sound/soc/intel/skylake/skl-topology.c | 95 +++++++++++++++++++++++++ sound/soc/intel/skylake/skl-topology.h | 1 + 3 files changed, 97 insertions(+)
diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h index 9eee32f5e407..f2711186c81f 100644 --- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -18,6 +18,7 @@ */ #define SKL_CONTROL_TYPE_BYTE_TLV 0x100 #define SKL_CONTROL_TYPE_MIC_SELECT 0x102 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT 0x103
#define HDA_SST_CFG_MAX 900 /* size of copier cfg*/ #define MAX_IN_QUEUE 8 diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 4b114ece58c6..c9cd6d60d57b 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -579,6 +579,38 @@ static int skl_tplg_unload_pipe_modules(struct skl_dev *skl, return ret; }
+static bool skl_tplg_is_multi_fmt(struct skl_dev *skl, struct skl_pipe *pipe) +{ + struct skl_pipe_fmt *cur_fmt; + struct skl_pipe_fmt *next_fmt; + int i; + + if (pipe->nr_cfgs <= 1) + return false; + + if (pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) + return true; + + for (i = 0; i < pipe->nr_cfgs - 1; i++) { + if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) { + cur_fmt = &pipe->configs[i].out_fmt; + next_fmt = &pipe->configs[i + 1].out_fmt; + } else { + cur_fmt = &pipe->configs[i].in_fmt; + next_fmt = &pipe->configs[i + 1].in_fmt; + } + + if (!CHECK_HW_PARAMS(cur_fmt->channels, cur_fmt->freq, + cur_fmt->bps, + next_fmt->channels, + next_fmt->freq, + next_fmt->bps)) + return true; + } + + return false; +} + /* * Here, we select pipe format based on the pipe type and pipe * direction to determine the current config index for the pipeline. @@ -601,6 +633,14 @@ skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig) return 0; }
+ if (skl_tplg_is_multi_fmt(skl, pipe)) { + pipe->cur_config_idx = pipe->pipe_config_idx; + pipe->memory_pages = pconfig->mem_pages; + dev_dbg(skl->dev, "found pipe config idx:%d\n", + pipe->cur_config_idx); + return 0; + } + if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE) { dev_dbg(skl->dev, "No conn_type detected, take 0th config\n"); pipe->cur_config_idx = 0; @@ -1315,6 +1355,56 @@ static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w, return 0; }
+static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol, + bool is_set) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct hdac_bus *bus = snd_soc_component_get_drvdata(component); + struct skl_dev *skl = bus_to_skl(bus); + struct skl_pipeline *ppl; + struct skl_pipe *pipe = NULL; + struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; + u32 *pipe_id; + + if (!ec) + return -EINVAL; + + if (is_set && ucontrol->value.enumerated.item[0] > ec->items) + return -EINVAL; + + pipe_id = ec->dobj.private; + + list_for_each_entry(ppl, &skl->ppl_list, node) { + if (ppl->pipe->ppl_id == *pipe_id) { + pipe = ppl->pipe; + break; + } + } + if (!pipe) + return -EIO; + + if (is_set) + pipe->pipe_config_idx = ucontrol->value.enumerated.item[0]; + else + ucontrol->value.enumerated.item[0] = pipe->pipe_config_idx; + + return 0; +} + +static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); +} + +static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); +} + static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, unsigned int __user *data, unsigned int size) { @@ -1854,6 +1944,11 @@ static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = { .get = skl_tplg_mic_control_get, .put = skl_tplg_mic_control_set, }, + { + .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT, + .get = skl_tplg_multi_config_get, + .put = skl_tplg_multi_config_set, + }, };
static int skl_tplg_fill_pipe_cfg(struct device *dev, diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index e967800dbb62..06576147cc29 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -306,6 +306,7 @@ struct skl_pipe { struct skl_path_config configs[SKL_MAX_PATH_CONFIGS]; struct list_head w_list; bool passthru; + u32 pipe_config_idx; };
enum skl_module_state {
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Multiple I/O PCM format support for pipe
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:47 +0100 Subject: ASoC: Intel: Multiple I/O PCM format support for pipe To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com, Pavan K S pavan.k.s@intel.com Message-ID: 20201129114148.13772-8-cezary.rojewski@intel.com
From: Mateusz Gorski mateusz.gorski@linux.intel.com
commit 1b450791d517d4d6666ab9ab6d9a20c8819e3572 upstream.
For pipes supporting multiple input/output formats, kcontrol is created and selection of pipe input and output configuration is done based on control set.
If more than one configuration is supported, then this patch allows user to select configuration of choice using amixer settings.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Signed-off-by: Pavan K S pavan.k.s@intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/uapi/sound/skl-tplg-interface.h | 1 sound/soc/intel/skylake/skl-topology.c | 95 ++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-topology.h | 1 3 files changed, 97 insertions(+)
--- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -18,6 +18,7 @@ */ #define SKL_CONTROL_TYPE_BYTE_TLV 0x100 #define SKL_CONTROL_TYPE_MIC_SELECT 0x102 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT 0x103
#define HDA_SST_CFG_MAX 900 /* size of copier cfg*/ #define MAX_IN_QUEUE 8 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -579,6 +579,38 @@ static int skl_tplg_unload_pipe_modules( return ret; }
+static bool skl_tplg_is_multi_fmt(struct skl_dev *skl, struct skl_pipe *pipe) +{ + struct skl_pipe_fmt *cur_fmt; + struct skl_pipe_fmt *next_fmt; + int i; + + if (pipe->nr_cfgs <= 1) + return false; + + if (pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) + return true; + + for (i = 0; i < pipe->nr_cfgs - 1; i++) { + if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) { + cur_fmt = &pipe->configs[i].out_fmt; + next_fmt = &pipe->configs[i + 1].out_fmt; + } else { + cur_fmt = &pipe->configs[i].in_fmt; + next_fmt = &pipe->configs[i + 1].in_fmt; + } + + if (!CHECK_HW_PARAMS(cur_fmt->channels, cur_fmt->freq, + cur_fmt->bps, + next_fmt->channels, + next_fmt->freq, + next_fmt->bps)) + return true; + } + + return false; +} + /* * Here, we select pipe format based on the pipe type and pipe * direction to determine the current config index for the pipeline. @@ -601,6 +633,14 @@ skl_tplg_get_pipe_config(struct skl_dev return 0; }
+ if (skl_tplg_is_multi_fmt(skl, pipe)) { + pipe->cur_config_idx = pipe->pipe_config_idx; + pipe->memory_pages = pconfig->mem_pages; + dev_dbg(skl->dev, "found pipe config idx:%d\n", + pipe->cur_config_idx); + return 0; + } + if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE) { dev_dbg(skl->dev, "No conn_type detected, take 0th config\n"); pipe->cur_config_idx = 0; @@ -1315,6 +1355,56 @@ static int skl_tplg_pga_event(struct snd return 0; }
+static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol, + bool is_set) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct hdac_bus *bus = snd_soc_component_get_drvdata(component); + struct skl_dev *skl = bus_to_skl(bus); + struct skl_pipeline *ppl; + struct skl_pipe *pipe = NULL; + struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; + u32 *pipe_id; + + if (!ec) + return -EINVAL; + + if (is_set && ucontrol->value.enumerated.item[0] > ec->items) + return -EINVAL; + + pipe_id = ec->dobj.private; + + list_for_each_entry(ppl, &skl->ppl_list, node) { + if (ppl->pipe->ppl_id == *pipe_id) { + pipe = ppl->pipe; + break; + } + } + if (!pipe) + return -EIO; + + if (is_set) + pipe->pipe_config_idx = ucontrol->value.enumerated.item[0]; + else + ucontrol->value.enumerated.item[0] = pipe->pipe_config_idx; + + return 0; +} + +static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); +} + +static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); +} + static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, unsigned int __user *data, unsigned int size) { @@ -1854,6 +1944,11 @@ static const struct snd_soc_tplg_kcontro .get = skl_tplg_mic_control_get, .put = skl_tplg_mic_control_set, }, + { + .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT, + .get = skl_tplg_multi_config_get, + .put = skl_tplg_multi_config_set, + }, };
static int skl_tplg_fill_pipe_cfg(struct device *dev, --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -306,6 +306,7 @@ struct skl_pipe { struct skl_path_config configs[SKL_MAX_PATH_CONFIGS]; struct list_head w_list; bool passthru; + u32 pipe_config_idx; };
enum skl_module_state {
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
From: Mateusz Gorski mateusz.gorski@linux.intel.com
commit 2d744ecf2b98405723a2138a547e5c75009bc4e5 upstream.
Automatically choose DMIC pipeline format configuration depending on information included in NHLT. Change the access rights of appropriate kcontrols to read-only in order to prevent user interference.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x --- include/uapi/sound/skl-tplg-interface.h | 1 + sound/soc/intel/skylake/skl-topology.c | 64 +++++++++++++++++++++++-- 2 files changed, 62 insertions(+), 3 deletions(-)
diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h index f2711186c81f..a93c0decfdd5 100644 --- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -19,6 +19,7 @@ #define SKL_CONTROL_TYPE_BYTE_TLV 0x100 #define SKL_CONTROL_TYPE_MIC_SELECT 0x102 #define SKL_CONTROL_TYPE_MULTI_IO_SELECT 0x103 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC 0x104
#define HDA_SST_CFG_MAX 900 /* size of copier cfg*/ #define MAX_IN_QUEUE 8 diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index c9cd6d60d57b..aa5833001fde 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1405,6 +1405,18 @@ static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol, return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); }
+static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); +} + +static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); +} + static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, unsigned int __user *data, unsigned int size) { @@ -1949,6 +1961,11 @@ static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = { .get = skl_tplg_multi_config_get, .put = skl_tplg_multi_config_set, }, + { + .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC, + .get = skl_tplg_multi_config_get_dmic, + .put = skl_tplg_multi_config_set_dmic, + } };
static int skl_tplg_fill_pipe_cfg(struct device *dev, @@ -3109,12 +3126,21 @@ static int skl_tplg_control_load(struct snd_soc_component *cmpnt, case SND_SOC_TPLG_CTL_ENUM: tplg_ec = container_of(hdr, struct snd_soc_tplg_enum_control, hdr); - if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READWRITE) { + if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) { se = (struct soc_enum *)kctl->private_value; if (tplg_ec->priv.size) - return skl_init_enum_data(bus->dev, se, - tplg_ec); + skl_init_enum_data(bus->dev, se, tplg_ec); } + + /* + * now that the control initializations are done, remove + * write permission for the DMIC configuration enums to + * avoid conflicts between NHLT settings and user interaction + */ + + if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC) + kctl->access = SNDRV_CTL_ELEM_ACCESS_READ; + break;
default: @@ -3584,6 +3610,37 @@ static int skl_manifest_load(struct snd_soc_component *cmpnt, int index, return 0; }
+static void skl_tplg_complete(struct snd_soc_component *component) +{ + struct snd_soc_dobj *dobj; + struct snd_soc_acpi_mach *mach = + dev_get_platdata(component->card->dev); + int i; + + list_for_each_entry(dobj, &component->dobj_list, list) { + struct snd_kcontrol *kcontrol = dobj->control.kcontrol; + struct soc_enum *se = + (struct soc_enum *)kcontrol->private_value; + char **texts = dobj->control.dtexts; + char chan_text[4]; + + if (dobj->type != SND_SOC_DOBJ_ENUM || + dobj->control.kcontrol->put != + skl_tplg_multi_config_set_dmic) + continue; + sprintf(chan_text, "c%d", mach->mach_params.dmic_num); + + for (i = 0; i < se->items; i++) { + struct snd_ctl_elem_value val; + + if (strstr(texts[i], chan_text)) { + val.value.enumerated.item[0] = i; + kcontrol->put(kcontrol, &val); + } + } + } +} + static struct snd_soc_tplg_ops skl_tplg_ops = { .widget_load = skl_tplg_widget_load, .control_load = skl_tplg_control_load, @@ -3593,6 +3650,7 @@ static struct snd_soc_tplg_ops skl_tplg_ops = { .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), .manifest = skl_manifest_load, .dai_load = skl_dai_load, + .complete = skl_tplg_complete, };
/*
This is a note to let you know that I've just added the patch titled
ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT
to the 5.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summ...
The filename of the patch is: asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Tue Dec 1 09:41:56 AM CET 2020
From: Cezary Rojewski cezary.rojewski@intel.com Date: Sun, 29 Nov 2020 12:41:48 +0100 Subject: ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com, pierre-louis.bossart@linux.intel.com, mateusz.gorski@linux.intel.com Message-ID: 20201129114148.13772-9-cezary.rojewski@intel.com
From: Mateusz Gorski mateusz.gorski@linux.intel.com
commit 2d744ecf2b98405723a2138a547e5c75009bc4e5 upstream.
Automatically choose DMIC pipeline format configuration depending on information included in NHLT. Change the access rights of appropriate kcontrols to read-only in order to prevent user interference.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/uapi/sound/skl-tplg-interface.h | 1 sound/soc/intel/skylake/skl-topology.c | 64 ++++++++++++++++++++++++++++++-- 2 files changed, 62 insertions(+), 3 deletions(-)
--- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -19,6 +19,7 @@ #define SKL_CONTROL_TYPE_BYTE_TLV 0x100 #define SKL_CONTROL_TYPE_MIC_SELECT 0x102 #define SKL_CONTROL_TYPE_MULTI_IO_SELECT 0x103 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC 0x104
#define HDA_SST_CFG_MAX 900 /* size of copier cfg*/ #define MAX_IN_QUEUE 8 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1405,6 +1405,18 @@ static int skl_tplg_multi_config_set(str return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); }
+static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); +} + +static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); +} + static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, unsigned int __user *data, unsigned int size) { @@ -1949,6 +1961,11 @@ static const struct snd_soc_tplg_kcontro .get = skl_tplg_multi_config_get, .put = skl_tplg_multi_config_set, }, + { + .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC, + .get = skl_tplg_multi_config_get_dmic, + .put = skl_tplg_multi_config_set_dmic, + } };
static int skl_tplg_fill_pipe_cfg(struct device *dev, @@ -3109,12 +3126,21 @@ static int skl_tplg_control_load(struct case SND_SOC_TPLG_CTL_ENUM: tplg_ec = container_of(hdr, struct snd_soc_tplg_enum_control, hdr); - if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READWRITE) { + if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) { se = (struct soc_enum *)kctl->private_value; if (tplg_ec->priv.size) - return skl_init_enum_data(bus->dev, se, - tplg_ec); + skl_init_enum_data(bus->dev, se, tplg_ec); } + + /* + * now that the control initializations are done, remove + * write permission for the DMIC configuration enums to + * avoid conflicts between NHLT settings and user interaction + */ + + if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC) + kctl->access = SNDRV_CTL_ELEM_ACCESS_READ; + break;
default: @@ -3584,6 +3610,37 @@ static int skl_manifest_load(struct snd_ return 0; }
+static void skl_tplg_complete(struct snd_soc_component *component) +{ + struct snd_soc_dobj *dobj; + struct snd_soc_acpi_mach *mach = + dev_get_platdata(component->card->dev); + int i; + + list_for_each_entry(dobj, &component->dobj_list, list) { + struct snd_kcontrol *kcontrol = dobj->control.kcontrol; + struct soc_enum *se = + (struct soc_enum *)kcontrol->private_value; + char **texts = dobj->control.dtexts; + char chan_text[4]; + + if (dobj->type != SND_SOC_DOBJ_ENUM || + dobj->control.kcontrol->put != + skl_tplg_multi_config_set_dmic) + continue; + sprintf(chan_text, "c%d", mach->mach_params.dmic_num); + + for (i = 0; i < se->items; i++) { + struct snd_ctl_elem_value val; + + if (strstr(texts[i], chan_text)) { + val.value.enumerated.item[0] = i; + kcontrol->put(kcontrol, &val); + } + } + } +} + static struct snd_soc_tplg_ops skl_tplg_ops = { .widget_load = skl_tplg_widget_load, .control_load = skl_tplg_control_load, @@ -3593,6 +3650,7 @@ static struct snd_soc_tplg_ops skl_tplg_ .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), .manifest = skl_manifest_load, .dai_load = skl_dai_load, + .complete = skl_tplg_complete, };
/*
Patches currently in stable-queue which might be from cezary.rojewski@intel.com are
queue-5.4/asoc-intel-skylake-select-hda-configuration-permissively.patch queue-5.4/asoc-intel-skylake-enable-codec-wakeup-during-chip-init.patch queue-5.4/asoc-intel-allow-for-rom-init-retry-on-cnl-platforms.patch queue-5.4/asoc-intel-skylake-await-purge-request-ack-on-cnl.patch queue-5.4/asoc-intel-skylake-remove-superfluous-chip-initialization.patch queue-5.4/asoc-intel-skylake-shield-against-no-nhlt-configurations.patch queue-5.4/asoc-intel-multiple-i-o-pcm-format-support-for-pipe.patch queue-5.4/asoc-intel-skylake-automatic-dmic-format-configuration-according-to-information-from-nhlt.patch
On Sun, Nov 29, 2020 at 12:41:40PM +0100, Cezary Rojewski wrote:
First six of the backport address numerous problems troubling HDAudio configuration users for Skylake driver. Upstream series: "ASoC: Intel: Skylake: Fix HDaudio and Dmic" [1] provides the explanation and reasoning behind it. These have been initialy pushed into v5.7-rc1 via: "sound updates for 5.7-rc1" [2] by Takashi.
Last two patches are from: "Add support for different DMIC configurations" [3] which focuses on HDAudio with DMIC configuration. Patch: "ASoC: Intel: Skylake: Add alternative topology binary name" of the mentioned series has already been merged to v5.4.y -stable and thus it's not included here.
Fixes target mainly Skylake and Kabylake based platforms, released in 2015-2016 period.
Thanks for these, it was very easy to pick them up in this format, much appreciated.
greg k-h
participants (3)
-
Cezary Rojewski -
Greg KH -
gregkh＠linuxfoundation.org