[alsa-devel] [PATCH 0/3] ASoC: mchp-i2s-mcc: Several fixes
This pathset fixes some issues detected while testing some more the Microchip I2S multichannel controller. The first two patches fix some issues that appear mostly when hw_free() and hw_params() callbacks are called multiple times. The third patch fixes a problem caused when the controller is in master mode and both capture and playback are played at the same time.
All three patches have a "Fixes" tag. Although they are independent, some conflicts might appear if they are not applied in the order presented in this patchset. If so, please let me know so I can rebase them.
Codrin Ciubotariu (3): ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running ASoC: mchp-i2s-mcc: Fix unprepare of GCLK ASoC: mchp-i2s-mcc: Fix simultaneous capture and playback in master mode
sound/soc/atmel/mchp-i2s-mcc.c | 111 +++++++++++++++++++-------------- 1 file changed, 64 insertions(+), 47 deletions(-)
If hw_free() gets called after hw_params(), GCLK remains prepared, preventing further use of it. This patch fixes this by unpreparing the clock in hw_free() or if hw_params() gets an error.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com --- sound/soc/atmel/mchp-i2s-mcc.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 8272915fa09b..ab7d5f98e759 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -670,8 +670,13 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, }
ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra); - if (ret < 0) + if (ret < 0) { + if (dev->gclk_use) { + clk_unprepare(dev->gclk); + dev->gclk_use = 0; + } return ret; + } return regmap_write(dev->regmap, MCHP_I2SMCC_MRB, mrb); }
@@ -710,9 +715,13 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream, regmap_write(dev->regmap, MCHP_I2SMCC_CR, MCHP_I2SMCC_CR_CKDIS);
if (dev->gclk_running) { - clk_disable_unprepare(dev->gclk); + clk_disable(dev->gclk); dev->gclk_running = 0; } + if (dev->gclk_use) { + clk_unprepare(dev->gclk); + dev->gclk_use = 0; + } }
return 0;
The patch
ASoC: mchp-i2s-mcc: Fix unprepare of GCLK
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 988b59467b2b14523a266957affbe9eca3e99fc9 Mon Sep 17 00:00:00 2001
From: Codrin Ciubotariu codrin.ciubotariu@microchip.com Date: Tue, 20 Aug 2019 19:24:09 +0300 Subject: [PATCH] ASoC: mchp-i2s-mcc: Fix unprepare of GCLK
If hw_free() gets called after hw_params(), GCLK remains prepared, preventing further use of it. This patch fixes this by unpreparing the clock in hw_free() or if hw_params() gets an error.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com Link: https://lore.kernel.org/r/20190820162411.24836-2-codrin.ciubotariu@microchip... Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/atmel/mchp-i2s-mcc.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 86495883ca3f..319f975586f1 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -670,8 +670,13 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, }
ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra); - if (ret < 0) + if (ret < 0) { + if (dev->gclk_use) { + clk_unprepare(dev->gclk); + dev->gclk_use = 0; + } return ret; + } return regmap_write(dev->regmap, MCHP_I2SMCC_MRB, mrb); }
@@ -708,9 +713,13 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream, regmap_write(dev->regmap, MCHP_I2SMCC_CR, MCHP_I2SMCC_CR_CKDIS);
if (dev->gclk_running) { - clk_disable_unprepare(dev->gclk); + clk_disable(dev->gclk); dev->gclk_running = 0; } + if (dev->gclk_use) { + clk_unprepare(dev->gclk); + dev->gclk_use = 0; + } }
return 0;
Since hw_free() can be called multiple times and not just after a stop trigger command, we should check whether the RX or TX ready interrupt was truly enabled previously. For this, we assure that the condition of the wait event is always true, except when RX/TX interrupts are enabled.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com --- sound/soc/atmel/mchp-i2s-mcc.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 86495883ca3f..8272915fa09b 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -686,22 +686,24 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream, err = wait_event_interruptible_timeout(dev->wq_txrdy, dev->tx_rdy, msecs_to_jiffies(500)); + if (err == 0) { + dev_warn_once(dev->dev, + "Timeout waiting for Tx ready\n"); + regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, + MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)); + dev->tx_rdy = 1; + } } else { err = wait_event_interruptible_timeout(dev->wq_rxrdy, dev->rx_rdy, msecs_to_jiffies(500)); - } - - if (err == 0) { - u32 idra; - - dev_warn_once(dev->dev, "Timeout waiting for %s\n", - is_playback ? "Tx ready" : "Rx ready"); - if (is_playback) - idra = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels); - else - idra = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels); - regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra); + if (err == 0) { + dev_warn_once(dev->dev, + "Timeout waiting for Rx ready\n"); + regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, + MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); + dev->rx_rdy = 1; + } }
if (!mchp_i2s_mcc_is_running(dev)) { @@ -809,6 +811,8 @@ static int mchp_i2s_mcc_dai_probe(struct snd_soc_dai *dai)
init_waitqueue_head(&dev->wq_txrdy); init_waitqueue_head(&dev->wq_rxrdy); + dev->tx_rdy = 1; + dev->rx_rdy = 1;
snd_soc_dai_init_dma_data(dai, &dev->playback, &dev->capture);
The patch
ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 0f6fc97501b790c971b11b52a654009d21c45238 Mon Sep 17 00:00:00 2001
From: Codrin Ciubotariu codrin.ciubotariu@microchip.com Date: Tue, 20 Aug 2019 19:24:10 +0300 Subject: [PATCH] ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is running
Since hw_free() can be called multiple times and not just after a stop trigger command, we should check whether the RX or TX ready interrupt was truly enabled previously. For this, we assure that the condition of the wait event is always true, except when RX/TX interrupts are enabled.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com Link: https://lore.kernel.org/r/20190820162411.24836-3-codrin.ciubotariu@microchip... Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/atmel/mchp-i2s-mcc.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 319f975586f1..ab7d5f98e759 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -691,22 +691,24 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream, err = wait_event_interruptible_timeout(dev->wq_txrdy, dev->tx_rdy, msecs_to_jiffies(500)); + if (err == 0) { + dev_warn_once(dev->dev, + "Timeout waiting for Tx ready\n"); + regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, + MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)); + dev->tx_rdy = 1; + } } else { err = wait_event_interruptible_timeout(dev->wq_rxrdy, dev->rx_rdy, msecs_to_jiffies(500)); - } - - if (err == 0) { - u32 idra; - - dev_warn_once(dev->dev, "Timeout waiting for %s\n", - is_playback ? "Tx ready" : "Rx ready"); - if (is_playback) - idra = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels); - else - idra = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels); - regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra); + if (err == 0) { + dev_warn_once(dev->dev, + "Timeout waiting for Rx ready\n"); + regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, + MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); + dev->rx_rdy = 1; + } }
if (!mchp_i2s_mcc_is_running(dev)) { @@ -818,6 +820,8 @@ static int mchp_i2s_mcc_dai_probe(struct snd_soc_dai *dai)
init_waitqueue_head(&dev->wq_txrdy); init_waitqueue_head(&dev->wq_rxrdy); + dev->tx_rdy = 1; + dev->rx_rdy = 1;
snd_soc_dai_init_dma_data(dai, &dev->playback, &dev->capture);
This controller supports capture and playback running at the same time, with the limitation that both capture and playback must be configured the same way (sample rate, sample format, number of channels, etc). For this, we have to assure that the configuration registers look the same when capture and playback are initiated. This patch fixes a bug in which the controller is in master mode and the hw_params() callback fails for the second audio stream. The fail occurs because the divisors are calculated after comparing the configuration registers for capture and playback. The fix consists in calculating the divisors before comparing the configuration registers. BCLK and LRC are then configured and started only if the controller is not already running.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com --- sound/soc/atmel/mchp-i2s-mcc.c | 70 ++++++++++++++++++---------------- 1 file changed, 37 insertions(+), 33 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index ab7d5f98e759..befc2a3a05b0 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -392,11 +392,11 @@ static int mchp_i2s_mcc_clk_get_rate_diff(struct clk *clk, }
static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, - unsigned int bclk, unsigned int *mra) + unsigned int bclk, unsigned int *mra, + unsigned long *best_rate) { unsigned long clk_rate; unsigned long lcm_rate; - unsigned long best_rate = 0; unsigned long best_diff_rate = ~0; unsigned int sysclk; struct clk *best_clk = NULL; @@ -423,7 +423,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, (clk_rate == bclk || clk_rate / (bclk * 2) <= GENMASK(5, 0)); clk_rate += lcm_rate) { ret = mchp_i2s_mcc_clk_get_rate_diff(dev->gclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "gclk error for rate %lu: %d", @@ -437,7 +437,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, }
ret = mchp_i2s_mcc_clk_get_rate_diff(dev->pclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "pclk error for rate %lu: %d", @@ -459,33 +459,17 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev,
dev_dbg(dev->dev, "source CLK is %s with rate %lu, diff %lu\n", best_clk == dev->pclk ? "pclk" : "gclk", - best_rate, best_diff_rate); - - /* set the rate */ - ret = clk_set_rate(best_clk, best_rate); - if (ret) { - dev_err(dev->dev, "unable to set rate %lu to %s: %d\n", - best_rate, best_clk == dev->pclk ? "PCLK" : "GCLK", - ret); - return ret; - } + *best_rate, best_diff_rate);
/* Configure divisors */ if (dev->sysclk) - *mra |= MCHP_I2SMCC_MRA_IMCKDIV(best_rate / (2 * sysclk)); - *mra |= MCHP_I2SMCC_MRA_ISCKDIV(best_rate / (2 * bclk)); + *mra |= MCHP_I2SMCC_MRA_IMCKDIV(*best_rate / (2 * sysclk)); + *mra |= MCHP_I2SMCC_MRA_ISCKDIV(*best_rate / (2 * bclk));
- if (best_clk == dev->gclk) { + if (best_clk == dev->gclk) *mra |= MCHP_I2SMCC_MRA_SRCCLK_GCLK; - ret = clk_prepare(dev->gclk); - if (ret < 0) - dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); - else - dev->gclk_use = 1; - } else { + else *mra |= MCHP_I2SMCC_MRA_SRCCLK_PCLK; - dev->gclk_use = 0; - }
return 0; } @@ -502,6 +486,7 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + unsigned long rate = 0; struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai); u32 mra = 0; u32 mrb = 0; @@ -640,6 +625,17 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return -EINVAL; }
+ if (set_divs) { + bclk_rate = frame_length * params_rate(params); + ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra, + &rate); + if (ret) { + dev_err(dev->dev, + "unable to configure the divisors: %d\n", ret); + return ret; + } + } + /* * If we are already running, the wanted setup must be * the same with the one that's currently ongoing @@ -656,19 +652,27 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return 0; }
- /* Save the number of channels to know what interrupts to enable */ - dev->channels = channels; - - if (set_divs) { - bclk_rate = frame_length * params_rate(params); - ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra); + if (mra & MCHP_I2SMCC_MRA_SRCCLK_GCLK && !dev->gclk_use) { + /* set the rate */ + ret = clk_set_rate(dev->gclk, rate); if (ret) { - dev_err(dev->dev, "unable to configure the divisors: %d\n", - ret); + dev_err(dev->dev, + "unable to set rate %lu to GCLK: %d\n", + rate, ret); + return ret; + } + + ret = clk_prepare(dev->gclk); + if (ret < 0) { + dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); return ret; } + dev->gclk_use = 1; }
+ /* Save the number of channels to know what interrupts to enable */ + dev->channels = channels; + ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra); if (ret < 0) { if (dev->gclk_use) {
The patch
ASoC: mchp-i2s-mcc: Fix simultaneous capture and playback in master mode
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From c9cff337eab394c4dc8b128dde7308a1dd2e653a Mon Sep 17 00:00:00 2001
From: Codrin Ciubotariu codrin.ciubotariu@microchip.com Date: Tue, 20 Aug 2019 19:24:11 +0300 Subject: [PATCH] ASoC: mchp-i2s-mcc: Fix simultaneous capture and playback in master mode
This controller supports capture and playback running at the same time, with the limitation that both capture and playback must be configured the same way (sample rate, sample format, number of channels, etc). For this, we have to assure that the configuration registers look the same when capture and playback are initiated. This patch fixes a bug in which the controller is in master mode and the hw_params() callback fails for the second audio stream. The fail occurs because the divisors are calculated after comparing the configuration registers for capture and playback. The fix consists in calculating the divisors before comparing the configuration registers. BCLK and LRC are then configured and started only if the controller is not already running.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com Link: https://lore.kernel.org/r/20190820162411.24836-4-codrin.ciubotariu@microchip... Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/atmel/mchp-i2s-mcc.c | 70 ++++++++++++++++++---------------- 1 file changed, 37 insertions(+), 33 deletions(-)
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 86495883ca3f..9a406144b18f 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -392,11 +392,11 @@ static int mchp_i2s_mcc_clk_get_rate_diff(struct clk *clk, }
static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, - unsigned int bclk, unsigned int *mra) + unsigned int bclk, unsigned int *mra, + unsigned long *best_rate) { unsigned long clk_rate; unsigned long lcm_rate; - unsigned long best_rate = 0; unsigned long best_diff_rate = ~0; unsigned int sysclk; struct clk *best_clk = NULL; @@ -423,7 +423,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, (clk_rate == bclk || clk_rate / (bclk * 2) <= GENMASK(5, 0)); clk_rate += lcm_rate) { ret = mchp_i2s_mcc_clk_get_rate_diff(dev->gclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "gclk error for rate %lu: %d", @@ -437,7 +437,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, }
ret = mchp_i2s_mcc_clk_get_rate_diff(dev->pclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "pclk error for rate %lu: %d", @@ -459,33 +459,17 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev,
dev_dbg(dev->dev, "source CLK is %s with rate %lu, diff %lu\n", best_clk == dev->pclk ? "pclk" : "gclk", - best_rate, best_diff_rate); - - /* set the rate */ - ret = clk_set_rate(best_clk, best_rate); - if (ret) { - dev_err(dev->dev, "unable to set rate %lu to %s: %d\n", - best_rate, best_clk == dev->pclk ? "PCLK" : "GCLK", - ret); - return ret; - } + *best_rate, best_diff_rate);
/* Configure divisors */ if (dev->sysclk) - *mra |= MCHP_I2SMCC_MRA_IMCKDIV(best_rate / (2 * sysclk)); - *mra |= MCHP_I2SMCC_MRA_ISCKDIV(best_rate / (2 * bclk)); + *mra |= MCHP_I2SMCC_MRA_IMCKDIV(*best_rate / (2 * sysclk)); + *mra |= MCHP_I2SMCC_MRA_ISCKDIV(*best_rate / (2 * bclk));
- if (best_clk == dev->gclk) { + if (best_clk == dev->gclk) *mra |= MCHP_I2SMCC_MRA_SRCCLK_GCLK; - ret = clk_prepare(dev->gclk); - if (ret < 0) - dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); - else - dev->gclk_use = 1; - } else { + else *mra |= MCHP_I2SMCC_MRA_SRCCLK_PCLK; - dev->gclk_use = 0; - }
return 0; } @@ -502,6 +486,7 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + unsigned long rate = 0; struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai); u32 mra = 0; u32 mrb = 0; @@ -640,6 +625,17 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return -EINVAL; }
+ if (set_divs) { + bclk_rate = frame_length * params_rate(params); + ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra, + &rate); + if (ret) { + dev_err(dev->dev, + "unable to configure the divisors: %d\n", ret); + return ret; + } + } + /* * If we are already running, the wanted setup must be * the same with the one that's currently ongoing @@ -656,19 +652,27 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return 0; }
- /* Save the number of channels to know what interrupts to enable */ - dev->channels = channels; - - if (set_divs) { - bclk_rate = frame_length * params_rate(params); - ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra); + if (mra & MCHP_I2SMCC_MRA_SRCCLK_GCLK && !dev->gclk_use) { + /* set the rate */ + ret = clk_set_rate(dev->gclk, rate); if (ret) { - dev_err(dev->dev, "unable to configure the divisors: %d\n", - ret); + dev_err(dev->dev, + "unable to set rate %lu to GCLK: %d\n", + rate, ret); + return ret; + } + + ret = clk_prepare(dev->gclk); + if (ret < 0) { + dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); return ret; } + dev->gclk_use = 1; }
+ /* Save the number of channels to know what interrupts to enable */ + dev->channels = channels; + ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra); if (ret < 0) return ret;
participants (2)
-
Codrin Ciubotariu -
Mark Brown