[RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
Add documentation for DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee steves.lee@maximintegrated.com ---
Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example
.../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +};
On Mon, May 18, 2020 at 09:49:30AM +0900, Steve Lee wrote:
Add documentation for DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee steves.lee@maximintegrated.com
Changed since V4:
- No changes.
Changed since V3:
- No changes.
Changed since V2:
- No changes.
Changed since V1:
- Modified sample text in example
You are obviously sending patches too quickly. Give folks a chance to review.
.../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++
Bindings are now in DT schema format. Please convert this. See Documentation/devicetree/writing-schema.rst
1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier
+This device supports I2C.
+Required properties:
- compatible : "maxim,max98390"
- reg : the I2C address of the device.
+Optional properties:
+- maxim,temperature_calib
- u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12
+- maxim,r0_calib
- u32. This is r0 calibration data which was measured in factory mode.
Unless these are shared already with other Maxim chips, s/_/-/.
+Example:
+codec: max98390@38 {
amplifier@38
- compatible = "maxim,max98390";
- reg = <0x38>;
- maxim,temperature_calib = <1024>;
- maxim,r0_calib = <100232>;
+};
2.17.1
On Wed, May 27, 2020 at 7:36 AM Rob Herring robh@kernel.org wrote:
On Mon, May 18, 2020 at 09:49:30AM +0900, Steve Lee wrote:
Add documentation for DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee steves.lee@maximintegrated.com
Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example
You are obviously sending patches too quickly. Give folks a chance to review.
Thanks for your feedback !.
.../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++
Bindings are now in DT schema format. Please convert this. See Documentation/devicetree/writing-schema.rst
Thanks for review. I will change txt to yaml version.
1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier
+This device supports I2C.
+Required properties:
- compatible : "maxim,max98390"
- reg : the I2C address of the device.
+Optional properties:
+- maxim,temperature_calib
- u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12
+- maxim,r0_calib
- u32. This is r0 calibration data which was measured in factory mode.
Unless these are shared already with other Maxim chips, s/_/-/.
+Example:
+codec: max98390@38 {
amplifier@38
I will change example as you advise.
compatible = "maxim,max98390";reg = <0x38>;maxim,temperature_calib = <1024>;maxim,r0_calib = <100232>;+};
2.17.1
participants (3)
-
Rob Herring -
Steve Lee -
Steve Lee