At Wed, 23 Dec 2009 18:02:41 +0100, Krzysztof Helt wrote:

From: Krzysztof Helt krzysztof.h1@wp.pl

Narrow the dma and irq selection after the DOS driver.

Add ALSA configuration description as well.

Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl

Applied now.

---

The dma8 must be 8-bit otherwise the 8-bit sound played through 16-bit dma has metalic noise. The 8-bit DMA cannot play 16-bit sound.

Hm, is it a SRC issue?

thanks,

Takashi

Documentation/sound/alsa/ALSA-Configuration.txt | 15 +++++++++++++++ sound/isa/sb/jazz16.c | 21 ++++++++++++++++++++- sound/isa/sb/sb8_main.c | 3 ++- 3 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8923597..92b0975 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1123,6 +1123,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.

 This module supports multiple cards, autoprobe and ISA PnP.

• Module snd-jazz16

• ---

• Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
• MVD1216 + MVA416 + MVA514.
• port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
• irq - IRQ # for SB DSP chip (3,5,7,9,10,15)
• dma8 - DMA # for SB DSP chip (1,3)
• dma16 - DMA # for SB DSP chip (5,7)
• mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
• mpu_irq - MPU-401 irq # (2,3,5,7)
• This module supports multiple cards.

• Module snd-korg1212

diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index d52966b..8d21a3f 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -189,10 +189,29 @@ static int __devinit snd_jazz16_match(struct device *devptr, unsigned int dev) if (port[dev] == SNDRV_AUTO_PORT) { snd_printk(KERN_ERR "please specify port\n"); return 0;

• } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) {

• snd_printk(KERN_ERR "incorrect port specified\n");
  

• return 0;
  

• }
• if (dma8[dev] != SNDRV_AUTO_DMA &&

•    dma8[dev] != 1 && dma8[dev] != 3) {
  

• snd_printk(KERN_ERR "dma8 must be 1 or 3\n");
  

• return 0;
  

  } if (dma16[dev] != SNDRV_AUTO_DMA && dma16[dev] != 5 && dma16[dev] != 7) {

• snd_printk(KERN_ERR "dma16 must be 5 or 7");
  

• snd_printk(KERN_ERR "dma16 must be 5 or 7\n");
  

• return 0;
  

• }
• if (mpu_port[dev] != SNDRV_AUTO_PORT &&

•    (mpu_port[dev] & ~0x030) != 0x300) {
  

• snd_printk(KERN_ERR "incorrect mpu_port specified\n");
  

• return 0;
  

• }
• if (mpu_irq[dev] != SNDRV_AUTO_DMA &&

•    mpu_irq[dev] != 2 && mpu_irq[dev] != 3 &&
  

•    mpu_irq[dev] != 5 && mpu_irq[dev] != 7) {
  

• snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n");
  

  return 0; } return 1;

diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c index 3222aed..7d84c9f 100644 --- a/sound/isa/sb/sb8_main.c +++ b/sound/isa/sb/sb8_main.c @@ -510,7 +510,8 @@ static int snd_sb8_open(struct snd_pcm_substream *substream) } switch (chip->hardware) { case SB_HW_JAZZ16:

• runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
  

• if (chip->dma16 == 5 || chip->dma16 == 7)
  

• 	runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
  

  runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000; runtime->hw.rate_min = 4000; runtime->hw.rate_max = 50000;

-- 1.6.4

---

Sprawdz sekrety swojego biorytmu. Kliknij >> http://link.interia.pl/f2534

---

Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel