Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready.

This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings:

- The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k.

- The various mixer controls of the MicroBook are not made available.

- The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this)

- The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device.

Signed-off-by: Manuel Reinhardt manuel.rhdt@gmail.com --- sound/usb/pcm.c | 4 ++ sound/usb/quirks-table.h | 65 +++++++++++++++++++++++++ sound/usb/quirks.c | 101 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 170 insertions(+)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index db114f3977e0..056af0a57b22 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -354,6 +354,10 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ep = 0x81; ifnum = 1; goto add_sync_ep_from_ifnum; + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ + ep = 0x84; + ifnum = 0; + goto add_sync_ep_from_ifnum; }

if (attr == USB_ENDPOINT_SYNC_ASYNC && diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index b345beb447bd..86e80916a029 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3398,5 +3398,70 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), .ifnum = QUIRK_NO_INTERFACE } }, +/* MOTU Microbook II */ +{ + USB_DEVICE(0x07fd, 0x0004), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "MOTU", + .product_name = "MicroBookII", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_MIXER, + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3BE, + .channels = 6, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0, + .endpoint = 0x84, + .rates = SNDRV_PCM_RATE_96000, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rate_min = 96000, + .rate_max = 96000, + .nr_rates = 1, + .maxpacksize = 0x00d8, + .rate_table = (unsigned int[]) { + 96000 + } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3BE, + .channels = 8, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0, + .endpoint = 0x03, + .rates = SNDRV_PCM_RATE_96000, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rate_min = 96000, + .rate_max = 96000, + .nr_rates = 1, + .maxpacksize = 0x0120, + .rate_table = (unsigned int[]) { + 96000 + } + } + }, + { + .ifnum = -1 + } + } + } +},

#undef USB_DEVICE_VENDOR_SPEC diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index f372c624bbf4..e6ce1bbe6ca6 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1000,6 +1000,105 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; }

+ +#define MICROBOOK_BUF_SIZE 128 + +static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf, + int buf_size, int *length) +{ + int err, actual_length; + + err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length, + &actual_length, 1000); + if (err < 0) + return err; + + print_hex_dump(KERN_DEBUG, "MicroBookII snd: ", DUMP_PREFIX_NONE, 16, 1, + buf, actual_length, false); + + memset(buf, 0, buf_size); + + err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size, + &actual_length, 1000); + if (err < 0) + return err; + + print_hex_dump(KERN_DEBUG, "MicroBookII rcv: ", DUMP_PREFIX_NONE, 16, 1, + buf, actual_length, false); + + *length = actual_length; + return 0; +} + +static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev) +{ + int err, actual_length, poll_attempts = 0; + static const u8 set_samplerate_seq[] = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x0b, 0x14, + 0x00, 0x00, 0x00, 0x01 }; + static const u8 poll_ready_seq[] = { 0x00, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x0b, 0x18 }; + u8 *buf = kzalloc(MICROBOOK_BUF_SIZE, GFP_KERNEL); + + if (!buf) + return -ENOMEM; + + dev_info(&dev->dev, "Waiting for MOTU Microbook II to boot up...\n"); + + /* First we tell the device which sample rate to use. */ + memcpy(buf, set_samplerate_seq, sizeof(set_samplerate_seq)); + actual_length = sizeof(set_samplerate_seq); + err = snd_usb_motu_microbookii_communicate(dev, buf, MICROBOOK_BUF_SIZE, + &actual_length); + + if (err < 0) { + dev_err(&dev->dev, + "failed setting the sample rate for Motu MicroBook II: %d\n", + err); + goto free_buf; + } + + /* Then we poll every 100 ms until the device informs of its readiness. */ + while (true) { + if (++poll_attempts > 100) { + dev_err(&dev->dev, + "failed booting Motu MicroBook II: timeout\n"); + err = -ENODEV; + goto free_buf; + } + + memset(buf, 0, MICROBOOK_BUF_SIZE); + memcpy(buf, poll_ready_seq, sizeof(poll_ready_seq)); + + actual_length = sizeof(poll_ready_seq); + err = snd_usb_motu_microbookii_communicate( + dev, buf, MICROBOOK_BUF_SIZE, &actual_length); + if (err < 0) { + dev_err(&dev->dev, + "failed booting Motu MicroBook II: communication error %d\n", + err); + goto free_buf; + } + + /* the device signals its readiness through a message of the + * form + * XX 06 00 00 00 00 0b 18 00 00 00 01 + * If the device is not yet ready to accept audio data, the + * last byte of that sequence is 00. + */ + if (actual_length == 12 && buf[actual_length - 1] == 1) + break; + + msleep(100); + } + + dev_info(&dev->dev, "MOTU MicroBook II ready\n"); + +free_buf: + kfree(buf); + return err; +} + /* * Setup quirks */ @@ -1177,6 +1276,8 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, return snd_usb_gamecon780_boot_quirk(dev); case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ return snd_usb_axefx3_boot_quirk(dev); + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ + return snd_usb_motu_microbookii_boot_quirk(dev); }

return 0;