[V7 PATCH] dt-bindings: Added device tree binding for max98390
Add DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee steves.lee@maximintegrated.com ---
Changed since V6: * Re-confirm yaml dt binding check * Add minimum and maximum value for each temperature_calib and r0_calib * Add maxim prefix for naming. Changed since V5: * Change txt to yaml and fix up the examples. Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example
.../bindings/sound/maxim,max98390.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98390.yaml
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml new file mode 100644 index 000000000000..e5ac35280da3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speaker Management + +maintainers: + - Steve Lee steves.lee@maximintegrated.com + +properties: + compatible: + const: maxim,max98390 + + reg: + maxItems: 1 + description: I2C address of the device. + + maxim,temperature_calib: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: The calculated temperature data was measured while doing the calibration. + minimum: 0 + maximum: 65535 + + maxim,r0_calib: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: This is r0 calibration data which was measured in factory mode. + minimum: 1 + maximum: 8388607 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98390: amplifier@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; + }; + };
On Tue, 02 Jun 2020 17:43:37 +0900, Steve Lee wrote:
Add DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee steves.lee@maximintegrated.com
Changed since V6:
- Re-confirm yaml dt binding check
- Add minimum and maximum value for each temperature_calib and r0_calib
- Add maxim prefix for naming.
Changed since V5:
- Change txt to yaml and fix up the examples.
Changed since V4:
- No changes.
Changed since V3:
- No changes.
Changed since V2:
- No changes.
Changed since V1:
- Modified sample text in example
.../bindings/sound/maxim,max98390.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98390.yaml
Reviewed-by: Rob Herring robh@kernel.org
On Tue, 2 Jun 2020 17:43:37 +0900, Steve Lee wrote:
Add DT binding of max98390 amplifier driver.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] dt-bindings: Added device tree binding for max98390 commit: 6b76bf3e0ff66eee4b714921fbabd588f90ab1fb
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Mark Brown
-
Rob Herring
-
Steve Lee