[PATCH 00/10] Add cs42l43 PC focused SoundWire CODEC
This patch chain adds support for the Cirrus Logic cs42l43 PC focused SoundWire CODEC. Some supporting work is included in the chain, including adding an ASoC control notification helper function and adding support for IRQs generated by the in-band SoundWire alert mechanism.
The chain is currently based of v6.4-rc1 because I am not 100% sure which tree we want to send everything through. The CODEC support has a build dependency on both the SoundWire change and the ASoC soc-component change.
Thanks, Charles
Charles Keepax (8): ASoC: soc-component: Add notify control helper function ASoC: ak4118: Update to use new component control notify helper ASoC: wm_adsp: Update to use new component control notify helepr dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding mfd: cs42l43: Add support for cs42l43 core driver irqchip/cs42l43: Add support for the cs42l43 IRQs pinctrl: cs42l43: Add support for the cs42l43 ASoC: cs42l43: Add support for the cs42l43
Lucas Tanure (2): soundwire: bus: Allow SoundWire peripherals to register IRQ handlers spi: cs42l43: Add SPI controller support
.../bindings/mfd/cirrus,cs42l43.yaml | 212 ++ MAINTAINERS | 7 + drivers/irqchip/Kconfig | 9 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-cs42l43.c | 170 ++ drivers/mfd/Kconfig | 23 + drivers/mfd/Makefile | 3 + drivers/mfd/cs42l43-i2c.c | 86 + drivers/mfd/cs42l43-sdw.c | 210 ++ drivers/mfd/cs42l43.c | 1044 ++++++++ drivers/mfd/cs42l43.h | 23 + drivers/pinctrl/cirrus/Kconfig | 11 + drivers/pinctrl/cirrus/Makefile | 2 + drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 614 +++++ drivers/soundwire/bus.c | 31 + drivers/soundwire/bus_type.c | 12 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-cs42l43.c | 287 +++ include/linux/irqchip/cs42l43.h | 61 + include/linux/mfd/cs42l43-regs.h | 1172 +++++++++ include/linux/mfd/cs42l43.h | 50 + include/linux/soundwire/sdw.h | 9 + include/sound/cs42l43.h | 84 + include/sound/soc-component.h | 4 + sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/ak4118.c | 11 +- sound/soc/codecs/cs42l43-jack.c | 946 +++++++ sound/soc/codecs/cs42l43-sdw.c | 75 + sound/soc/codecs/cs42l43.c | 2270 +++++++++++++++++ sound/soc/codecs/cs42l43.h | 117 + sound/soc/codecs/wm_adsp.c | 20 +- sound/soc/soc-component.c | 22 + 34 files changed, 7586 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml create mode 100644 drivers/irqchip/irq-cs42l43.c create mode 100644 drivers/mfd/cs42l43-i2c.c create mode 100644 drivers/mfd/cs42l43-sdw.c create mode 100644 drivers/mfd/cs42l43.c create mode 100644 drivers/mfd/cs42l43.h create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c create mode 100644 drivers/spi/spi-cs42l43.c create mode 100644 include/linux/irqchip/cs42l43.h create mode 100644 include/linux/mfd/cs42l43-regs.h create mode 100644 include/linux/mfd/cs42l43.h create mode 100644 include/sound/cs42l43.h create mode 100644 sound/soc/codecs/cs42l43-jack.c create mode 100644 sound/soc/codecs/cs42l43-sdw.c create mode 100644 sound/soc/codecs/cs42l43.c create mode 100644 sound/soc/codecs/cs42l43.h
From: Lucas Tanure tanureal@opensource.cirrus.com
Currently the in-band alerts for SoundWire peripherals can only be communicated to the driver through the interrupt_callback function. This however is slightly inconvient for devices that wish to share IRQ handling code between SoundWire and I2C/SPI, the later would normally register an IRQ handler with the IRQ subsystem. However there is no reason the SoundWire in-band IRQs can not also be communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ handler to receive SoundWire in-band alerts, allowing code to be shared across control buses.
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- drivers/soundwire/bus.c | 31 +++++++++++++++++++++++++++++++ drivers/soundwire/bus_type.c | 12 ++++++++++++ include/linux/soundwire/sdw.h | 9 +++++++++ 3 files changed, 52 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 1ea6a64f8c4a5..30cd03757aafe 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -3,6 +3,7 @@
#include <linux/acpi.h> #include <linux/delay.h> +#include <linux/irq.h> #include <linux/mod_devicetable.h> #include <linux/pm_runtime.h> #include <linux/soundwire/sdw_registers.h> @@ -25,6 +26,23 @@ static int sdw_get_id(struct sdw_bus *bus) return 0; }
+static int sdw_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct sdw_bus *bus = h->host_data; + + irq_set_chip_data(virq, bus); + irq_set_chip(virq, &bus->irq_chip); + irq_set_nested_thread(virq, 1); + irq_set_noprobe(virq); + + return 0; +} + +static const struct irq_domain_ops sdw_domain_ops = { + .map = sdw_irq_map, +}; + /** * sdw_bus_master_add() - add a bus Master instance * @bus: bus instance @@ -142,6 +160,13 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, bus->params.curr_bank = SDW_BANK0; bus->params.next_bank = SDW_BANK1;
+ bus->irq_chip.name = dev_name(bus->dev); + bus->domain = irq_domain_add_linear(NULL, SDW_MAX_DEVICES, &sdw_domain_ops, bus); + if (!bus->domain) { + dev_err(bus->dev, "Failed to add IRQ domain\n"); + return -EINVAL; + } + return 0; } EXPORT_SYMBOL(sdw_bus_master_add); @@ -178,6 +203,9 @@ static int sdw_delete_slave(struct device *dev, void *data) void sdw_bus_master_delete(struct sdw_bus *bus) { device_for_each_child(bus->dev, NULL, sdw_delete_slave); + + irq_domain_remove(bus->domain); + sdw_master_device_del(bus);
sdw_bus_debugfs_exit(bus); @@ -1711,6 +1739,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) struct device *dev = &slave->dev; struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
+ if (slave->prop.use_domain_irq && slave->irq) + handle_nested_irq(slave->irq); + if (drv->ops && drv->ops->interrupt_callback) { slave_intr.sdca_cascade = sdca_cascade; slave_intr.control_port = clear; diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 1f43ee848eac8..fafbc284e82da 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -122,6 +122,12 @@ static int sdw_drv_probe(struct device *dev) if (drv->ops && drv->ops->read_prop) drv->ops->read_prop(slave);
+ if (slave->prop.use_domain_irq) { + slave->irq = irq_create_mapping(slave->bus->domain, slave->dev_num); + if (!slave->irq) + dev_warn(dev, "Failed to map IRQ\n"); + } + /* init the sysfs as we have properties now */ ret = sdw_slave_sysfs_init(slave); if (ret < 0) @@ -166,7 +172,13 @@ static int sdw_drv_remove(struct device *dev) int ret = 0;
mutex_lock(&slave->sdw_dev_lock); + slave->probed = false; + + if (slave->prop.use_domain_irq) + irq_dispose_mapping(irq_find_mapping(slave->bus->domain, + slave->dev_num)); + mutex_unlock(&slave->sdw_dev_lock);
if (drv->remove) diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index ef645de13ae93..c3ab5e5f9cfa4 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -5,6 +5,8 @@ #define __SOUNDWIRE_H
#include <linux/bug.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/mod_devicetable.h> #include <linux/bitfield.h>
@@ -369,6 +371,7 @@ struct sdw_dpn_prop { * @clock_reg_supported: the Peripheral implements the clock base and scale * registers introduced with the SoundWire 1.2 specification. SDCA devices * do not need to set this boolean property as the registers are required. + * @use_domain_irq: call actual IRQ handler on slave, as well as callback */ struct sdw_slave_prop { u32 mipi_revision; @@ -393,6 +396,7 @@ struct sdw_slave_prop { u8 scp_int1_mask; u32 quirks; bool clock_reg_supported; + bool use_domain_irq; };
#define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY BIT(0) @@ -640,6 +644,7 @@ struct sdw_slave_ops { * struct sdw_slave - SoundWire Slave * @id: MIPI device ID * @dev: Linux device + * @irq: IRQ number * @status: Status reported by the Slave * @bus: Bus handle * @prop: Slave properties @@ -669,6 +674,7 @@ struct sdw_slave_ops { struct sdw_slave { struct sdw_slave_id id; struct device dev; + int irq; enum sdw_slave_status status; struct sdw_bus *bus; struct sdw_slave_prop prop; @@ -883,6 +889,7 @@ struct sdw_master_ops { * is used to compute and program bus bandwidth, clock, frame shape, * transport and port parameters * @debugfs: Bus debugfs + * @domain: IRQ domain * @defer_msg: Defer message * @clk_stop_timeout: Clock stop timeout computed * @bank_switch_timeout: Bank switch timeout computed @@ -916,6 +923,8 @@ struct sdw_bus { #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif + struct irq_chip irq_chip; + struct irq_domain *domain; struct sdw_defer defer_msg; unsigned int clk_stop_timeout; u32 bank_switch_timeout;
@@ -1711,6 +1739,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) struct device *dev = &slave->dev; struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
if (slave->prop.use_domain_irq && slave->irq)handle_nested_irq(slave->irq);
I am a bit lost here, I can understand that alerts would be handled by a dedicated handler, but here the code continues and will call the existing interrupt_callback.
Is this intentional? I wonder if there's a risk with two entities dealing with the same event and programming the same registers. Shouldn't there be some sort of 'either or' rule?
if (drv->ops && drv->ops->interrupt_callback) { slave_intr.sdca_cascade = sdca_cascade; slave_intr.control_port = clear;diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 1f43ee848eac8..fafbc284e82da 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -122,6 +122,12 @@ static int sdw_drv_probe(struct device *dev) if (drv->ops && drv->ops->read_prop) drv->ops->read_prop(slave);
- if (slave->prop.use_domain_irq) {
slave->irq = irq_create_mapping(slave->bus->domain, slave->dev_num);if (!slave->irq)dev_warn(dev, "Failed to map IRQ\n");- }
- /* init the sysfs as we have properties now */ ret = sdw_slave_sysfs_init(slave); if (ret < 0)
@@ -166,7 +172,13 @@ static int sdw_drv_remove(struct device *dev) int ret = 0;
mutex_lock(&slave->sdw_dev_lock);
slave->probed = false;
if (slave->prop.use_domain_irq)
irq_dispose_mapping(irq_find_mapping(slave->bus->domain,slave->dev_num));mutex_unlock(&slave->sdw_dev_lock);
if (drv->remove)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index ef645de13ae93..c3ab5e5f9cfa4 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -5,6 +5,8 @@ #define __SOUNDWIRE_H
#include <linux/bug.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/mod_devicetable.h> #include <linux/bitfield.h>
@@ -369,6 +371,7 @@ struct sdw_dpn_prop {
- @clock_reg_supported: the Peripheral implements the clock base and scale
- registers introduced with the SoundWire 1.2 specification. SDCA devices
- do not need to set this boolean property as the registers are required.
- @use_domain_irq: call actual IRQ handler on slave, as well as callback
what callback, the interrupt_callback? That would mean the interrupt is handled twice?
I am probably missing something here?
*/ struct sdw_slave_prop { u32 mipi_revision; @@ -393,6 +396,7 @@ struct sdw_slave_prop { u8 scp_int1_mask; u32 quirks; bool clock_reg_supported;
- bool use_domain_irq;
};
On Fri, May 12, 2023 at 08:45:51AM -0500, Pierre-Louis Bossart wrote:
@@ -1711,6 +1739,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) struct device *dev = &slave->dev; struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
if (slave->prop.use_domain_irq && slave->irq)handle_nested_irq(slave->irq);I am a bit lost here, I can understand that alerts would be handled by a dedicated handler, but here the code continues and will call the existing interrupt_callback.
Is this intentional? I wonder if there's a risk with two entities dealing with the same event and programming the same registers. Shouldn't there be some sort of 'either or' rule?
I guess there is a risk of them "handling" the IRQ twice, although it is hard to see why you would write the driver that way. Also since they are sequencial the second would I guess just see that no IRQs are pending.
The intention for calling both is that it facilitates using the same IRQ handler for I2C and SoundWire. At least on the Cirrus devices there are a bunch of chip specific registers that need treated exactly the same on I2C and SoundWire, but then a couple of extra registers that need handled in the SoundWire case. This way the handling of those can be kept completely in the SoundWire part of the code and not ifdef-ed into the main IRQ path.
Thanks, Charles
On 5/12/23 11:02, Charles Keepax wrote:
On Fri, May 12, 2023 at 08:45:51AM -0500, Pierre-Louis Bossart wrote:
@@ -1711,6 +1739,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) struct device *dev = &slave->dev; struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
if (slave->prop.use_domain_irq && slave->irq)handle_nested_irq(slave->irq);I am a bit lost here, I can understand that alerts would be handled by a dedicated handler, but here the code continues and will call the existing interrupt_callback.
Is this intentional? I wonder if there's a risk with two entities dealing with the same event and programming the same registers. Shouldn't there be some sort of 'either or' rule?
I guess there is a risk of them "handling" the IRQ twice, although it is hard to see why you would write the driver that way. Also since they are sequencial the second would I guess just see that no IRQs are pending.
The intention for calling both is that it facilitates using the same IRQ handler for I2C and SoundWire. At least on the Cirrus devices there are a bunch of chip specific registers that need treated exactly the same on I2C and SoundWire, but then a couple of extra registers that need handled in the SoundWire case. This way the handling of those can be kept completely in the SoundWire part of the code and not ifdef-ed into the main IRQ path.
Sounds good to me, but it's worth adding a comment and improving the commit message with design intent/rules since it's a common part in drivers/soundwire/
On Fri, May 12, 2023 at 11:34:44AM -0500, Pierre-Louis Bossart wrote:
On 5/12/23 11:02, Charles Keepax wrote:
On Fri, May 12, 2023 at 08:45:51AM -0500, Pierre-Louis Bossart wrote:
@@ -1711,6 +1739,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) struct device *dev = &slave->dev; struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
if (slave->prop.use_domain_irq && slave->irq)handle_nested_irq(slave->irq);I am a bit lost here, I can understand that alerts would be handled by a dedicated handler, but here the code continues and will call the existing interrupt_callback.
Is this intentional? I wonder if there's a risk with two entities dealing with the same event and programming the same registers. Shouldn't there be some sort of 'either or' rule?
I guess there is a risk of them "handling" the IRQ twice, although it is hard to see why you would write the driver that way. Also since they are sequencial the second would I guess just see that no IRQs are pending.
The intention for calling both is that it facilitates using the same IRQ handler for I2C and SoundWire. At least on the Cirrus devices there are a bunch of chip specific registers that need treated exactly the same on I2C and SoundWire, but then a couple of extra registers that need handled in the SoundWire case. This way the handling of those can be kept completely in the SoundWire part of the code and not ifdef-ed into the main IRQ path.
Sounds good to me, but it's worth adding a comment and improving the commit message with design intent/rules since it's a common part in drivers/soundwire/
Yeah no issues with updating the commit message to explain that in more detail.
Thanks, Charles
Add a function to allow ASoC drivers to easily notify an ALSA control change. This function will automatically add any component naming prefix into the control name.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- include/sound/soc-component.h | 4 ++++ sound/soc/soc-component.c | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+)
diff --git a/include/sound/soc-component.h b/include/sound/soc-component.h index 0814ed1438640..0b47603c9db29 100644 --- a/include/sound/soc-component.h +++ b/include/sound/soc-component.h @@ -454,6 +454,10 @@ int snd_soc_component_force_enable_pin_unlocked( struct snd_soc_component *component, const char *pin);
+/* component controls */ +int snd_soc_component_notify_control(struct snd_soc_component *component, + const char * const ctl); + /* component driver ops */ int snd_soc_component_open(struct snd_soc_component *component, struct snd_pcm_substream *substream); diff --git a/sound/soc/soc-component.c b/sound/soc/soc-component.c index ff25718ff2e88..4356cc320fea0 100644 --- a/sound/soc/soc-component.c +++ b/sound/soc/soc-component.c @@ -236,6 +236,28 @@ int snd_soc_component_force_enable_pin_unlocked( } EXPORT_SYMBOL_GPL(snd_soc_component_force_enable_pin_unlocked);
+int snd_soc_component_notify_control(struct snd_soc_component *component, + const char * const ctl) +{ + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + struct snd_kcontrol *kctl; + + if (component->name_prefix) + snprintf(name, ARRAY_SIZE(name), "%s %s", component->name_prefix, ctl); + else + snprintf(name, ARRAY_SIZE(name), "%s", ctl); + + kctl = snd_soc_card_get_kcontrol(component->card, name); + if (!kctl) + return soc_component_ret(component, -EINVAL); + + snd_ctl_notify(component->card->snd_card, + SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_component_notify_control); + /** * snd_soc_component_set_jack - configure component jack. * @component: COMPONENTs
Update the driver to use the new ASoC core control notify helper. This also fixes a bug where the control would not be found if the CODEC was given a name prefix.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- sound/soc/codecs/ak4118.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/ak4118.c b/sound/soc/codecs/ak4118.c index b6d9a10bdccdc..74ccfb0d921d6 100644 --- a/sound/soc/codecs/ak4118.c +++ b/sound/soc/codecs/ak4118.c @@ -264,8 +264,6 @@ static irqreturn_t ak4118_irq_handler(int irq, void *data) struct ak4118_priv *ak4118 = data; struct snd_soc_component *component = ak4118->component; struct snd_kcontrol_new *kctl_new; - struct snd_kcontrol *kctl; - struct snd_ctl_elem_id *id; unsigned int i;
if (!component) @@ -273,13 +271,8 @@ static irqreturn_t ak4118_irq_handler(int irq, void *data)
for (i = 0; i < ARRAY_SIZE(ak4118_iec958_controls); i++) { kctl_new = &ak4118_iec958_controls[i]; - kctl = snd_soc_card_get_kcontrol(component->card, - kctl_new->name); - if (!kctl) - continue; - id = &kctl->id; - snd_ctl_notify(component->card->snd_card, - SNDRV_CTL_EVENT_MASK_VALUE, id); + + snd_soc_component_notify_control(component, kctl_new->name); }
return IRQ_HANDLED;
On 5/12/23 07:28, Charles Keepax wrote:
Update the driver to use the new ASoC core control notify helper. This also fixes a bug where the control would not be found if the CODEC was given a name prefix.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
sound/soc/codecs/ak4118.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/ak4118.c b/sound/soc/codecs/ak4118.c
should patches 2, 3, 4 be part of a separate series, they really have nothing to do with the Cirrus CS32L43?
index b6d9a10bdccdc..74ccfb0d921d6 100644 --- a/sound/soc/codecs/ak4118.c +++ b/sound/soc/codecs/ak4118.c @@ -264,8 +264,6 @@ static irqreturn_t ak4118_irq_handler(int irq, void *data) struct ak4118_priv *ak4118 = data; struct snd_soc_component *component = ak4118->component; struct snd_kcontrol_new *kctl_new;
struct snd_kcontrol *kctl;
struct snd_ctl_elem_id *id; unsigned int i;
if (!component)
@@ -273,13 +271,8 @@ static irqreturn_t ak4118_irq_handler(int irq, void *data)
for (i = 0; i < ARRAY_SIZE(ak4118_iec958_controls); i++) { kctl_new = &ak4118_iec958_controls[i];
kctl = snd_soc_card_get_kcontrol(component->card,kctl_new->name);if (!kctl)continue;id = &kctl->id;snd_ctl_notify(component->card->snd_card,SNDRV_CTL_EVENT_MASK_VALUE, id);
snd_soc_component_notify_control(component, kctl_new->name);}
return IRQ_HANDLED;
On Fri, May 12, 2023 at 08:48:40AM -0500, Pierre-Louis Bossart wrote:
On 5/12/23 07:28, Charles Keepax wrote:
Update the driver to use the new ASoC core control notify helper. This also fixes a bug where the control would not be found if the CODEC was given a name prefix.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
sound/soc/codecs/ak4118.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/ak4118.c b/sound/soc/codecs/ak4118.c
should patches 2, 3, 4 be part of a separate series, they really have nothing to do with the Cirrus CS32L43?
Patch 2 has a build dependency on the CODEC patch, 3/4 are debatable. I could do the series without these patches and do a seperate chain with those three patches and an extra patch to convert the cs42l43, if that is preferred to shrink the chain.
Thanks, Charles
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- sound/soc/codecs/wm_adsp.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 216120b68b64b..6270cb2e9395c 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -686,8 +686,6 @@ int wm_adsp_write_ctl(struct wm_adsp *dsp, const char *name, int type, { struct cs_dsp_coeff_ctl *cs_ctl = cs_dsp_get_ctl(&dsp->cs_dsp, name, type, alg); struct wm_coeff_ctl *ctl; - struct snd_kcontrol *kcontrol; - char ctl_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; int ret;
ret = cs_dsp_coeff_write_ctrl(cs_ctl, 0, buf, len); @@ -699,23 +697,7 @@ int wm_adsp_write_ctl(struct wm_adsp *dsp, const char *name, int type,
ctl = cs_ctl->priv;
- if (dsp->component->name_prefix) - snprintf(ctl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %s", - dsp->component->name_prefix, ctl->name); - else - snprintf(ctl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s", - ctl->name); - - kcontrol = snd_soc_card_get_kcontrol(dsp->component->card, ctl_name); - if (!kcontrol) { - adsp_err(dsp, "Can't find kcontrol %s\n", ctl_name); - return -EINVAL; - } - - snd_ctl_notify(dsp->component->card->snd_card, - SNDRV_CTL_EVENT_MASK_VALUE, &kcontrol->id); - - return 0; + return snd_soc_component_notify_control(dsp->component, ctl->name); } EXPORT_SYMBOL_GPL(wm_adsp_write_ctl);
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a YAML DT binding document for this device.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- .../bindings/mfd/cirrus,cs42l43.yaml | 212 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 213 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml new file mode 100644 index 0000000000000..e1fd70e0a3467 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L43 Audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface + (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed + for portable applications. It provides a high dynamic range, stereo + DAC for headphone output, two integrated Class D amplifiers for + loudspeakers, and two ADCs for wired headset microphone input or + stereo line input. PDM inputs are provided for digital microphones. + +required: + - compatible + - reg + - VDD_P-supply + - VDD_A-supply + - VDD_D-supply + - VDD_IO-supply + - VDD_CP-supply + +additionalProperties: false + +properties: + compatible: + enum: + - cirrus,cs42l43 + + reg: + maxItems: 1 + + VDD_P-supply: + description: + Power supply for the high voltage interface. + + VDD_A-supply: + description: + Power supply for internal analog circuits. + + VDD_D-supply: + description: + Power supply for internal digital circuits. + + VDD_IO-supply: + description: + Power supply for external interface and internal digital logic. + + VDD_CP-supply: + description: + Power supply for the amplifier 3 and 4 charge pump. + + VDD_AMP-supply: + description: + Power supply for amplifier 1 and 2. + + reset-gpios: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + clocks: + items: + - description: Synchronous audio clock provided on mclk_in. + + clock-names: + const: mclk + + pinctrl: + type: object + + allOf: + - $ref: "../pinctrl/pinctrl.yaml#" + + properties: + pin-settings: + type: object + + additionalProperties: false + + patternProperties: + '-pins$': + type: object + + allOf: + - $ref: "../pinctrl/pincfg-node.yaml#" + - $ref: "../pinctrl/pinmux-node.yaml#" + + oneOf: + - required: [ groups ] + - required: [ pins ] + + unevaluatedProperties: false + + properties: + groups: + enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ] + + pins: + enum: [ gpio1, gpio2, gpio3, + asp_dout, asp_fsync, asp_bclk, + pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data, + i2c_sda, i2c_scl, + spi_miso, spi_sck, spi_ssb ] + + function: + enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ] + + drive-strength: + description: Set drive strength in mA + enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ] + + input-debounce: + description: Set input debounce in uS + enum: [ 0, 85 ] + + spi: + type: object + + allOf: + - $ref: "../spi/spi-controller.yaml#" + + unevaluatedProperties: false + +examples: + - | + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs42l43: codec@1a { + compatible = "cirrus,cs42l43"; + reg = <0x1a>; + + VDD_P-supply = <&vdd5v0>; + VDD_D-supply = <&vdd1v8>; + VDD_A-supply = <&vdd1v8>; + VDD_IO-supply = <&vdd1v8>; + VDD_CP-supply = <&vdd1v8>; + VDD_AMP-supply = <&vdd5v0>; + + reset-gpios = <&gpio 0>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cs42l43_pins 0 0 3>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio>; + interrupts = <56 8>; + + #sound-dai-cells = <1>; + + clocks = <&clks 0>; + clock-names = "mclk"; + + cs42l43_pins: pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + shutter-pins { + groups = "gpio3"; + function = "mic-shutter"; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&cs42l43 1 0>; + + sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <1400000>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7e0b87d5aa2e5..0db9f37eec258 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4926,6 +4926,7 @@ M: Richard Fitzgerald rf@opensource.cirrus.com L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: patches@opensource.cirrus.com S: Maintained +F: Documentation/devicetree/bindings/mfd/cirrus,cs* F: Documentation/devicetree/bindings/sound/cirrus,cs* F: include/dt-bindings/sound/cs* F: include/sound/cs*
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a YAML DT binding document for this device.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
.../bindings/mfd/cirrus,cs42l43.yaml | 212 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 213 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml new file mode 100644 index 0000000000000..e1fd70e0a3467 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Cirrus Logic CS42L43 Audio CODEC
That's audio codec, so it should be in sound, not MFD.
+maintainers:
- patches@opensource.cirrus.com
+description: |
- The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
- (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
- for portable applications. It provides a high dynamic range, stereo
- DAC for headphone output, two integrated Class D amplifiers for
- loudspeakers, and two ADCs for wired headset microphone input or
- stereo line input. PDM inputs are provided for digital microphones.
+required:
- compatible
- reg
- VDD_P-supply
- VDD_A-supply
- VDD_D-supply
- VDD_IO-supply
- VDD_CP-supply
lowercase, no underscores in all property names.
+additionalProperties: false
This order is quite unexpected... please do not invent your own layout. Use example-schema as your starting point. I suspect there will be many things to fix, so limited review follows (not complete).
Missing ref to dai-common
+properties:
- compatible:
- enum:
- cirrus,cs42l43- reg:
- maxItems: 1
- VDD_P-supply:
- description:
Power supply for the high voltage interface.- VDD_A-supply:
- description:
Power supply for internal analog circuits.- VDD_D-supply:
- description:
Power supply for internal digital circuits.- VDD_IO-supply:
- description:
Power supply for external interface and internal digital logic.- VDD_CP-supply:
- description:
Power supply for the amplifier 3 and 4 charge pump.- VDD_AMP-supply:
- description:
Power supply for amplifier 1 and 2.- reset-gpios:
- maxItems: 1
- gpio-controller: true
- '#gpio-cells':
- const: 2
- gpio-ranges:
- items:
- description: A phandle to the CODEC pinctrl nodeminimum: 0- const: 0- const: 0- const: 3- interrupt-controller: true
- '#interrupt-cells':
- const: 2
- interrupts:
- maxItems: 1
- '#sound-dai-cells':
- const: 1
- clocks:
- items:
- description: Synchronous audio clock provided on mclk_in.- clock-names:
- const: mclk
- pinctrl:
- type: object
additionalProperties: false
- allOf:
- $ref: "../pinctrl/pinctrl.yaml#"
No quotes, absolute path, so /schemas/pinctrl/....
- properties:
pin-settings:
What's this node about? pinctrl/pinctrl/pins? One level too much.
type: objectadditionalProperties: falsepatternProperties:'-pins$':type: objectallOf:- $ref: "../pinctrl/pincfg-node.yaml#"- $ref: "../pinctrl/pinmux-node.yaml#"
Same comments.
oneOf:- required: [ groups ]- required: [ pins ]unevaluatedProperties: falseproperties:groups:enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]pins:enum: [ gpio1, gpio2, gpio3,asp_dout, asp_fsync, asp_bclk,pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,i2c_sda, i2c_scl,spi_miso, spi_sck, spi_ssb ]function:enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]drive-strength:description: Set drive strength in mAenum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]input-debounce:description: Set input debounce in uSenum: [ 0, 85 ]- spi:
- type: object
- allOf:
- $ref: "../spi/spi-controller.yaml#"
Same comments.
- unevaluatedProperties: false
+examples:
- |
- i2c@e0004000 {
#address-cells = <1>;#size-cells = <0>;reg = <0xe0004000 0x1000>;
Drop, just i2c
cs42l43: codec@1a {compatible = "cirrus,cs42l43";reg = <0x1a>;VDD_P-supply = <&vdd5v0>;VDD_D-supply = <&vdd1v8>;VDD_A-supply = <&vdd1v8>;VDD_IO-supply = <&vdd1v8>;VDD_CP-supply = <&vdd1v8>;VDD_AMP-supply = <&vdd5v0>;reset-gpios = <&gpio 0>;
Use proper defines for flags.
Best regards, Krzysztof
On Fri, May 12, 2023 at 05:23:22PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
+$id: http://devicetree.org/schemas/mfd/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Cirrus Logic CS42L43 Audio CODEC
That's audio codec, so it should be in sound, not MFD.
Is this true even despite the device being implemented as an MFD? I am happy to move it, and will do so unless I hear otherwise.
- VDD_P-supply
- VDD_A-supply
- VDD_D-supply
- VDD_IO-supply
- VDD_CP-supply
lowercase, no underscores in all property names.
I guess we can rename all the regulators to lower case.
+additionalProperties: false
This order is quite unexpected... please do not invent your own layout. Use example-schema as your starting point. I suspect there will be many things to fix, so limited review follows (not complete).
Missing ref to dai-common
Apologies for that I was a little hesitant about this but this order did make the binding document much more readable, the intentation got really hard to follow in the traditional order. I guess since I have things working now I can put it back, again I will do so unless I hear otherwise.
- pinctrl:
- type: object
additionalProperties: false
Can do.
- allOf:
- $ref: "../pinctrl/pinctrl.yaml#"No quotes, absolute path, so /schemas/pinctrl/....
Can do.
- properties:
pin-settings:What's this node about? pinctrl/pinctrl/pins? One level too much.
codec/pinctrl/pins
The device is a codec, so the main node should be called codec, then it has a subnode called pinctrl to satisfy the pinctrl DT binding.
+examples:
- |
- i2c@e0004000 {
#address-cells = <1>;#size-cells = <0>;reg = <0xe0004000 0x1000>;Drop, just i2c
Can do.
cs42l43: codec@1a {compatible = "cirrus,cs42l43";reg = <0x1a>;VDD_P-supply = <&vdd5v0>;VDD_D-supply = <&vdd1v8>;VDD_A-supply = <&vdd1v8>;VDD_IO-supply = <&vdd1v8>;VDD_CP-supply = <&vdd1v8>;VDD_AMP-supply = <&vdd5v0>;reset-gpios = <&gpio 0>;Use proper defines for flags.
Can do.
Thanks, Charles
On 12/05/2023 18:15, Charles Keepax wrote:
On Fri, May 12, 2023 at 05:23:22PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
+$id: http://devicetree.org/schemas/mfd/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Cirrus Logic CS42L43 Audio CODEC
That's audio codec, so it should be in sound, not MFD.
Is this true even despite the device being implemented as an MFD?
Implementation in Linux almost does not matter here. Bindings location match the device main purpose. We indeed stuff into MFD bindings things like PMIC, because PMIC is a bit more than just regulators, and we do not have here subsystem for PMICs. If you call it Audio Codec, then I vote for sound directory for bindings.
I am happy to move it, and will do so unless I hear otherwise.
- VDD_P-supply
- VDD_A-supply
- VDD_D-supply
- VDD_IO-supply
- VDD_CP-supply
lowercase, no underscores in all property names.
I guess we can rename all the regulators to lower case.
+additionalProperties: false
This order is quite unexpected... please do not invent your own layout. Use example-schema as your starting point. I suspect there will be many things to fix, so limited review follows (not complete).
Missing ref to dai-common
Apologies for that I was a little hesitant about this but this order did make the binding document much more readable, the intentation got really hard to follow in the traditional order. I guess since I have things working now I can put it back, again I will do so unless I hear otherwise.
The additional/unevaluatedProperties from child nodes are indeed moved then up - following the property: pinctrl: type: object additionalProperties: false
but that's exception and for the rest I don't see any troubles with indentation. That would be the only binding... so what's here so special?
- pinctrl:
- type: object
additionalProperties: false
Can do.
- allOf:
- $ref: "../pinctrl/pinctrl.yaml#"No quotes, absolute path, so /schemas/pinctrl/....
Can do.
- properties:
pin-settings:What's this node about? pinctrl/pinctrl/pins? One level too much.
codec/pinctrl/pins
The device is a codec, so the main node should be called codec, then it has a subnode called pinctrl to satisfy the pinctrl DT binding.
Sure, but then you do not need pin-settings. Look at Qualcomm bindings for example:
Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
Best regards, Krzysztof
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for
...
- interrupt-controller: true
- '#interrupt-cells':
- const: 2
Hm, are you sure? Who is the consumer/user of this interrupt controller?
- interrupts:
- maxItems: 1
- '#sound-dai-cells':
- const: 1
- clocks:
Best regards, Krzysztof
On Fri, May 12, 2023 at 05:25:52PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for
...
- interrupt-controller: true
- '#interrupt-cells':
- const: 2
Hm, are you sure? Who is the consumer/user of this interrupt controller?
Anyone who wants the device has GPIOs that can signal IRQs. Some of the other IRQs could be more generally useful, such as some of the jack detection ones.
Thanks, Charles
On 12/05/2023 18:18, Charles Keepax wrote:
On Fri, May 12, 2023 at 05:25:52PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for
...
- interrupt-controller: true
- '#interrupt-cells':
- const: 2
Hm, are you sure? Who is the consumer/user of this interrupt controller?
Anyone who wants the device has GPIOs that can signal IRQs. Some of the other IRQs could be more generally useful, such as some of the jack detection ones.
OK, makes sense, but it is a bit odd then to have: codec { which is GPIO and interrupt controller, but not pin controller pinctrl { pin controller, which is not GPIO and not interrupt controller } } Maybe all the GPIO/pin/related interrupt properties should be moved to pinctrl node?
Best regards, Krzysztof
On Sat, May 13, 2023 at 08:08:05PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 18:18, Charles Keepax wrote:
On Fri, May 12, 2023 at 05:25:52PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for
...
- interrupt-controller: true
- '#interrupt-cells':
- const: 2
Hm, are you sure? Who is the consumer/user of this interrupt controller?
Anyone who wants the device has GPIOs that can signal IRQs. Some of the other IRQs could be more generally useful, such as some of the jack detection ones.
OK, makes sense, but it is a bit odd then to have: codec { which is GPIO and interrupt controller, but not pin controller pinctrl { pin controller, which is not GPIO and not interrupt controller } } Maybe all the GPIO/pin/related interrupt properties should be moved to pinctrl node?
I will have a look at that although I have a vague memory that this made the pinctrl very sad doing this. Presumably a bug somewhere but might take me a while to figure that out. The interrupt controller is a bit of a grey area as well since it has a bunch of IRQs that don't relate to the pins as well as some that do. So logically it might be better suited on the root node.
Thanks, Charles
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides PM/system power management.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- MAINTAINERS | 2 + drivers/mfd/Kconfig | 23 + drivers/mfd/Makefile | 3 + drivers/mfd/cs42l43-i2c.c | 86 +++ drivers/mfd/cs42l43-sdw.c | 210 ++++++ drivers/mfd/cs42l43.c | 1044 ++++++++++++++++++++++++++ drivers/mfd/cs42l43.h | 23 + include/linux/mfd/cs42l43-regs.h | 1172 ++++++++++++++++++++++++++++++ include/linux/mfd/cs42l43.h | 50 ++ 9 files changed, 2613 insertions(+) create mode 100644 drivers/mfd/cs42l43-i2c.c create mode 100644 drivers/mfd/cs42l43-sdw.c create mode 100644 drivers/mfd/cs42l43.c create mode 100644 drivers/mfd/cs42l43.h create mode 100644 include/linux/mfd/cs42l43-regs.h create mode 100644 include/linux/mfd/cs42l43.h
diff --git a/MAINTAINERS b/MAINTAINERS index 0db9f37eec258..8d2076941ff36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4928,7 +4928,9 @@ L: patches@opensource.cirrus.com S: Maintained F: Documentation/devicetree/bindings/mfd/cirrus,cs* F: Documentation/devicetree/bindings/sound/cirrus,cs* +F: drivers/mfd/cs42l43* F: include/dt-bindings/sound/cs* +F: include/linux/mfd/cs42l43* F: include/sound/cs* F: sound/pci/hda/cs* F: sound/pci/hda/hda_cs_dsp_ctl.* diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e90463c4441ce..65ceb1be41296 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -237,6 +237,29 @@ config MFD_CROS_EC_DEV To compile this driver as a module, choose M here: the module will be called cros-ec-dev.
+config MFD_CS42L43 + tristate + select MFD_CORE + select REGMAP + +config MFD_CS42L43_I2C + tristate "Cirrus Logic CS42L43 (I2C)" + depends on I2C + select REGMAP_I2C + select MFD_CS42L43 + help + Select this to support the Cirrus Logic CS42L43 PC CODEC with + headphone and class D speaker drivers over I2C. + +config MFD_CS42L43_SDW + tristate "Cirrus Logic CS42L43 (SoundWire)" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + select MFD_CS42L43 + help + Select this to support the Cirrus Logic CS42L43 PC CODEC with + headphone and class D speaker drivers over SoundWire. + config MFD_MADERA tristate "Cirrus Logic Madera codecs" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1d2392f06f78a..407bc2f98dc19 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,9 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o obj-$(CONFIG_MFD_CROS_EC_DEV) += cros_ec_dev.o +obj-$(CONFIG_MFD_CS42L43) += cs42l43.o +obj-$(CONFIG_MFD_CS42L43_I2C) += cs42l43-i2c.o +obj-$(CONFIG_MFD_CS42L43_SDW) += cs42l43-sdw.o obj-$(CONFIG_MFD_ENE_KB3930) += ene-kb3930.o obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o obj-$(CONFIG_MFD_GATEWORKS_GSC) += gateworks-gsc.o diff --git a/drivers/mfd/cs42l43-i2c.c b/drivers/mfd/cs42l43-i2c.c new file mode 100644 index 0000000000000..bed570ab80bb3 --- /dev/null +++ b/drivers/mfd/cs42l43-i2c.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 I2C driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/module.h> + +#include "cs42l43.h" + +static int cs42l43_i2c_probe(struct i2c_client *i2c) +{ + struct cs42l43 *cs42l43; + int ret; + + cs42l43 = devm_kzalloc(&i2c->dev, sizeof(*cs42l43), GFP_KERNEL); + if (!cs42l43) + return -ENOMEM; + + cs42l43->dev = &i2c->dev; + cs42l43->irq = i2c->irq; + // I2C is always attached by definition + cs42l43->attached = true; + + cs42l43->regmap = devm_regmap_init_i2c(i2c, &cs42l43_i2c_regmap); + if (IS_ERR(cs42l43->regmap)) { + ret = PTR_ERR(cs42l43->regmap); + dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + + return cs42l43_dev_probe(cs42l43); +} + +static void cs42l43_i2c_remove(struct i2c_client *i2c) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(&i2c->dev); + + cs42l43_dev_remove(cs42l43); +} + +static struct i2c_device_id cs42l43_i2c_id[] = { + { "cs42l43", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs42l43_i2c_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id cs42l43_of_match[] = { + { .compatible = "cirrus,cs42l43", }, + {} +}; +MODULE_DEVICE_TABLE(of, cs42l43_of_match); +#endif + +#if IS_ENABLED(CONFIG_ACPI) +static const struct acpi_device_id cs42l43_acpi_match[] = { + { "CSC4243", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, cs42l43_acpi_match); +#endif + +static struct i2c_driver cs42l43_i2c_driver = { + .driver = { + .name = "cs42l43", + .pm = &cs42l43_pm_ops, + .of_match_table = of_match_ptr(cs42l43_of_match), + .acpi_match_table = ACPI_PTR(cs42l43_acpi_match), + }, + + .probe_new = cs42l43_i2c_probe, + .remove = cs42l43_i2c_remove, + .id_table = cs42l43_i2c_id, +}; +module_i2c_driver(cs42l43_i2c_driver); + +MODULE_IMPORT_NS(MFD_CS42L43); + +MODULE_DESCRIPTION("CS42L43 I2C Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/cs42l43-sdw.c b/drivers/mfd/cs42l43-sdw.c new file mode 100644 index 0000000000000..e2c2918408b1b --- /dev/null +++ b/drivers/mfd/cs42l43-sdw.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 SoundWire driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> + +#include "cs42l43.h" + +enum cs42l43_sdw_ports { + CS42L43_DMIC_DEC_ASP_PORT = 1, + CS42L43_SPK_TX_PORT, + CS42L43_SPDIF_HP_PORT, + CS42L43_SPK_RX_PORT, + CS42L43_ASP_PORT, +}; + +static int cs42l43_read_prop(struct sdw_slave *sdw) +{ + struct sdw_slave_prop *prop = &sdw->prop; + struct device *dev = &sdw->dev; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval; + int i; + u32 bit; + + prop->use_domain_irq = true; + prop->paging_support = true; + prop->wake_capable = true; + prop->source_ports = BIT(CS42L43_DMIC_DEC_ASP_PORT) | BIT(CS42L43_SPK_TX_PORT); + prop->sink_ports = BIT(CS42L43_SPDIF_HP_PORT) | + BIT(CS42L43_SPK_RX_PORT) | BIT(CS42L43_ASP_PORT); + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY | SDW_SCP_INT1_IMPL_DEF; + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(dev, nval, sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].max_ch = 2; + dpn[i].type = SDW_DPN_FULL; + dpn[i].max_word = 24; + i++; + } + /* All ports are 2 channels max, except the first one, CS42L43_DMIC_DEC_ASP_PORT */ + dpn[CS42L43_DMIC_DEC_ASP_PORT].max_ch = 4; + + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(dev, nval, sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].max_ch = 2; + dpn[i].type = SDW_DPN_FULL; + dpn[i].max_word = 24; + i++; + } + + return 0; +} + +static int cs42l43_sdw_update_status(struct sdw_slave *sdw, enum sdw_slave_status status) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev); + + switch (status) { + case SDW_SLAVE_ATTACHED: + dev_dbg(cs42l43->dev, "Device attach\n"); + + sdw_write_no_pm(sdw, CS42L43_GEN_INT_MASK_1, + CS42L43_INT_STAT_GEN1_MASK); + + cs42l43->attached = true; + + complete(&cs42l43->device_attach); + break; + case SDW_SLAVE_UNATTACHED: + dev_dbg(cs42l43->dev, "Device detach\n"); + + cs42l43->attached = false; + + reinit_completion(&cs42l43->device_attach); + complete(&cs42l43->device_detach); + break; + default: + break; + } + + return 0; +} + +static int cs42l43_sdw_interrupt(struct sdw_slave *sdw, + struct sdw_slave_intr_status *status) +{ + /* + * There is only a single bit in GEN_INT_STAT_1 and it doesn't clear if + * IRQs are still pending so doing a read/write here after handling the + * IRQ is fine. + */ + sdw_read_no_pm(sdw, CS42L43_GEN_INT_STAT_1); + sdw_write_no_pm(sdw, CS42L43_GEN_INT_STAT_1, 1); + + return 0; +} + +static int cs42l43_sdw_bus_config(struct sdw_slave *sdw, struct sdw_bus_params *params) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev); + int ret = 0; + + mutex_lock(&cs42l43->pll_lock); + + if (cs42l43->sdw_freq != params->curr_dr_freq / 2) { + if (cs42l43->sdw_pll_active) { + dev_err(cs42l43->dev, "PLL active can't change SoundWire bus clock\n"); + ret = -EBUSY; + } else { + cs42l43->sdw_freq = params->curr_dr_freq / 2; + } + } + + mutex_unlock(&cs42l43->pll_lock); + + return ret; +} + +static const struct sdw_slave_ops cs42l43_sdw_ops = { + .read_prop = cs42l43_read_prop, + .update_status = cs42l43_sdw_update_status, + .interrupt_callback = cs42l43_sdw_interrupt, + .bus_config = cs42l43_sdw_bus_config, +}; + +static int cs42l43_sdw_probe(struct sdw_slave *sdw, const struct sdw_device_id *id) +{ + struct cs42l43 *cs42l43; + struct device *dev = &sdw->dev; + int ret; + + cs42l43 = devm_kzalloc(dev, sizeof(*cs42l43), GFP_KERNEL); + if (!cs42l43) + return -ENOMEM; + + cs42l43->dev = dev; + cs42l43->sdw = sdw; + + cs42l43->regmap = devm_regmap_init_sdw(sdw, &cs42l43_sdw_regmap); + if (IS_ERR(cs42l43->regmap)) { + ret = PTR_ERR(cs42l43->regmap); + dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + + return cs42l43_dev_probe(cs42l43); +} + +static int cs42l43_sdw_remove(struct sdw_slave *sdw) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev); + + cs42l43_dev_remove(cs42l43); + + return 0; +} + +static const struct sdw_device_id cs42l43_sdw_id[] = { + SDW_SLAVE_ENTRY(0x01FA, 0x4243, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, cs42l43_sdw_id); + +static struct sdw_driver cs42l43_sdw_driver = { + .driver = { + .name = "cs42l43", + .pm = &cs42l43_pm_ops, + }, + + .probe = cs42l43_sdw_probe, + .remove = cs42l43_sdw_remove, + .id_table = cs42l43_sdw_id, + .ops = &cs42l43_sdw_ops, +}; +module_sdw_driver(cs42l43_sdw_driver); + +MODULE_IMPORT_NS(MFD_CS42L43); + +MODULE_DESCRIPTION("CS42L43 SoundWire Driver"); +MODULE_AUTHOR("Lucas Tanure tanureal@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c new file mode 100644 index 0000000000000..b815802222e18 --- /dev/null +++ b/drivers/mfd/cs42l43.c @@ -0,0 +1,1044 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 core driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/bitops.h> +#include <linux/build_bug.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/firmware.h> +#include <linux/jiffies.h> +#include <linux/mfd/core.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/soundwire/sdw.h> + +#include "cs42l43.h" + +static const struct reg_sequence cs42l43_reva_patch[] = { + { 0x4000, 0x00000055 }, + { 0x4000, 0x000000AA }, + { 0x10084, 0x00000000 }, + { 0x1741C, 0x00CD2000 }, + { 0x1718C, 0x00000003 }, + { 0x4000, 0x00000000 }, + { CS42L43_CCM_BLK_CLK_CONTROL, 0x00000002 }, + { CS42L43_HPPATHVOL, 0x011B011B }, + { CS42L43_OSC_DIV_SEL, 0x00000001 }, + { CS42L43_DACCNFG2, 0x00000005 }, + { CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 }, + { CS42L43_RELID, 0x0000000F }, +}; + +static const struct reg_default cs42l43_reg_default[] = { + { CS42L43_DRV_CTRL1, 0x000186C0 }, + { CS42L43_DRV_CTRL3, 0x286DB018 }, + { CS42L43_DRV_CTRL4, 0x000006D8 }, + { CS42L43_DRV_CTRL_5, 0x136C00C0 }, + { CS42L43_GPIO_CTRL1, 0x00000707 }, + { CS42L43_GPIO_CTRL2, 0x00000000 }, + { CS42L43_GPIO_FN_SEL, 0x00000000 }, + { CS42L43_MCLK_SRC_SEL, 0x00000000 }, + { CS42L43_SAMPLE_RATE1, 0x00000003 }, + { CS42L43_SAMPLE_RATE2, 0x00000003 }, + { CS42L43_SAMPLE_RATE3, 0x00000003 }, + { CS42L43_SAMPLE_RATE4, 0x00000003 }, + { CS42L43_PLL_CONTROL, 0x00000000 }, + { CS42L43_FS_SELECT1, 0x00000000 }, + { CS42L43_FS_SELECT2, 0x00000000 }, + { CS42L43_FS_SELECT3, 0x00000000 }, + { CS42L43_FS_SELECT4, 0x00000000 }, + { CS42L43_PDM_CONTROL, 0x00000000 }, + { CS42L43_ASP_CLK_CONFIG1, 0x00010001 }, + { CS42L43_ASP_CLK_CONFIG2, 0x00000000 }, + { CS42L43_OSC_DIV_SEL, 0x00000001 }, + { CS42L43_ADC_B_CTRL1, 0x00000000 }, + { CS42L43_ADC_B_CTRL2, 0x00000000 }, + { CS42L43_DECIM_HPF_WNF_CTRL1, 0x00000001 }, + { CS42L43_DECIM_HPF_WNF_CTRL2, 0x00000001 }, + { CS42L43_DECIM_HPF_WNF_CTRL3, 0x00000001 }, + { CS42L43_DECIM_HPF_WNF_CTRL4, 0x00000001 }, + { CS42L43_DMIC_PDM_CTRL, 0x00000000 }, + { CS42L43_DECIM_VOL_CTRL_CH1_CH2, 0x20122012 }, + { CS42L43_DECIM_VOL_CTRL_CH3_CH4, 0x20122012 }, + { CS42L43_INTP_VOLUME_CTRL1, 0x00000180 }, + { CS42L43_INTP_VOLUME_CTRL2, 0x00000180 }, + { CS42L43_AMP1_2_VOL_RAMP, 0x00000022 }, + { CS42L43_ASP_CTRL, 0x00000004 }, + { CS42L43_ASP_FSYNC_CTRL1, 0x000000FA }, + { CS42L43_ASP_FSYNC_CTRL2, 0x00000001 }, + { CS42L43_ASP_FSYNC_CTRL3, 0x00000000 }, + { CS42L43_ASP_FSYNC_CTRL4, 0x000001F4 }, + { CS42L43_ASP_DATA_CTRL, 0x0000003A }, + { CS42L43_ASP_RX_EN, 0x00000000 }, + { CS42L43_ASP_TX_EN, 0x00000000 }, + { CS42L43_ASP_RX_CH1_CTRL, 0x00170001 }, + { CS42L43_ASP_RX_CH2_CTRL, 0x00170031 }, + { CS42L43_ASP_RX_CH3_CTRL, 0x00170061 }, + { CS42L43_ASP_RX_CH4_CTRL, 0x00170091 }, + { CS42L43_ASP_RX_CH5_CTRL, 0x001700C1 }, + { CS42L43_ASP_RX_CH6_CTRL, 0x001700F1 }, + { CS42L43_ASP_TX_CH1_CTRL, 0x00170001 }, + { CS42L43_ASP_TX_CH2_CTRL, 0x00170031 }, + { CS42L43_ASP_TX_CH3_CTRL, 0x00170061 }, + { CS42L43_ASP_TX_CH4_CTRL, 0x00170091 }, + { CS42L43_ASP_TX_CH5_CTRL, 0x001700C1 }, + { CS42L43_ASP_TX_CH6_CTRL, 0x001700F1 }, + { CS42L43_ASPTX1_INPUT, 0x00800000 }, + { CS42L43_ASPTX2_INPUT, 0x00800000 }, + { CS42L43_ASPTX3_INPUT, 0x00800000 }, + { CS42L43_ASPTX4_INPUT, 0x00800000 }, + { CS42L43_ASPTX5_INPUT, 0x00800000 }, + { CS42L43_ASPTX6_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP1_CH1_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP1_CH2_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP1_CH3_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP1_CH4_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP2_CH1_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP2_CH2_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP3_CH1_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP3_CH2_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP4_CH1_INPUT, 0x00800000 }, + { CS42L43_SWIRE_DP4_CH2_INPUT, 0x00800000 }, + { CS42L43_ASRC_INT1_INPUT1, 0x00800000 }, + { CS42L43_ASRC_INT2_INPUT1, 0x00800000 }, + { CS42L43_ASRC_INT3_INPUT1, 0x00800000 }, + { CS42L43_ASRC_INT4_INPUT1, 0x00800000 }, + { CS42L43_ASRC_DEC1_INPUT1, 0x00800000 }, + { CS42L43_ASRC_DEC2_INPUT1, 0x00800000 }, + { CS42L43_ASRC_DEC3_INPUT1, 0x00800000 }, + { CS42L43_ASRC_DEC4_INPUT1, 0x00800000 }, + { CS42L43_ISRC1INT1_INPUT1, 0x00800000 }, + { CS42L43_ISRC1INT2_INPUT1, 0x00800000 }, + { CS42L43_ISRC1DEC1_INPUT1, 0x00800000 }, + { CS42L43_ISRC1DEC2_INPUT1, 0x00800000 }, + { CS42L43_ISRC2INT1_INPUT1, 0x00800000 }, + { CS42L43_ISRC2INT2_INPUT1, 0x00800000 }, + { CS42L43_ISRC2DEC1_INPUT1, 0x00800000 }, + { CS42L43_ISRC2DEC2_INPUT1, 0x00800000 }, + { CS42L43_EQ1MIX_INPUT1, 0x00800000 }, + { CS42L43_EQ1MIX_INPUT2, 0x00800000 }, + { CS42L43_EQ1MIX_INPUT3, 0x00800000 }, + { CS42L43_EQ1MIX_INPUT4, 0x00800000 }, + { CS42L43_EQ2MIX_INPUT1, 0x00800000 }, + { CS42L43_EQ2MIX_INPUT2, 0x00800000 }, + { CS42L43_EQ2MIX_INPUT3, 0x00800000 }, + { CS42L43_EQ2MIX_INPUT4, 0x00800000 }, + { CS42L43_SPDIF1_INPUT1, 0x00800000 }, + { CS42L43_SPDIF2_INPUT1, 0x00800000 }, + { CS42L43_AMP1MIX_INPUT1, 0x00800000 }, + { CS42L43_AMP1MIX_INPUT2, 0x00800000 }, + { CS42L43_AMP1MIX_INPUT3, 0x00800000 }, + { CS42L43_AMP1MIX_INPUT4, 0x00800000 }, + { CS42L43_AMP2MIX_INPUT1, 0x00800000 }, + { CS42L43_AMP2MIX_INPUT2, 0x00800000 }, + { CS42L43_AMP2MIX_INPUT3, 0x00800000 }, + { CS42L43_AMP2MIX_INPUT4, 0x00800000 }, + { CS42L43_AMP3MIX_INPUT1, 0x00800000 }, + { CS42L43_AMP3MIX_INPUT2, 0x00800000 }, + { CS42L43_AMP3MIX_INPUT3, 0x00800000 }, + { CS42L43_AMP3MIX_INPUT4, 0x00800000 }, + { CS42L43_AMP4MIX_INPUT1, 0x00800000 }, + { CS42L43_AMP4MIX_INPUT2, 0x00800000 }, + { CS42L43_AMP4MIX_INPUT3, 0x00800000 }, + { CS42L43_AMP4MIX_INPUT4, 0x00800000 }, + { CS42L43_ASRC_INT_ENABLES, 0x00000100 }, + { CS42L43_ASRC_DEC_ENABLES, 0x00000100 }, + { CS42L43_PDNCNTL, 0x00000000 }, + { CS42L43_RINGSENSE_DEB_CTRL, 0x0000001B }, + { CS42L43_TIPSENSE_DEB_CTRL, 0x0000001B }, + { CS42L43_HS2, 0x050106F3 }, + { CS42L43_STEREO_MIC_CTRL, 0x00000000 }, + { CS42L43_STEREO_MIC_CLAMP_CTRL, 0x00000001 }, + { CS42L43_BLOCK_EN2, 0x00000000 }, + { CS42L43_BLOCK_EN3, 0x00000000 }, + { CS42L43_BLOCK_EN4, 0x00000000 }, + { CS42L43_BLOCK_EN5, 0x00000000 }, + { CS42L43_BLOCK_EN6, 0x00000000 }, + { CS42L43_BLOCK_EN7, 0x00000000 }, + { CS42L43_BLOCK_EN8, 0x00000000 }, + { CS42L43_BLOCK_EN9, 0x00000000 }, + { CS42L43_BLOCK_EN10, 0x00000000 }, + { CS42L43_BLOCK_EN11, 0x00000000 }, + { CS42L43_TONE_CH1_CTRL, 0x00000000 }, + { CS42L43_TONE_CH2_CTRL, 0x00000000 }, + { CS42L43_MIC_DETECT_CONTROL_1, 0x00000003 }, + { CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, 0x02000003 }, + { CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 }, + { CS42L43_ISRC1_CTRL, 0x00000000 }, + { CS42L43_ISRC2_CTRL, 0x00000000 }, + { CS42L43_CTRL_REG, 0x00000006 }, + { CS42L43_FDIV_FRAC, 0x40000000 }, + { CS42L43_CAL_RATIO, 0x00000080 }, + { CS42L43_SPI_CLK_CONFIG1, 0x00000000 }, + { CS42L43_SPI_CONFIG1, 0x00000000 }, + { CS42L43_SPI_CONFIG2, 0x00000000 }, + { CS42L43_SPI_CONFIG3, 0x00000001 }, + { CS42L43_SPI_CONFIG4, 0x00000000 }, + { CS42L43_TRAN_CONFIG3, 0x00000000 }, + { CS42L43_TRAN_CONFIG4, 0x00000000 }, + { CS42L43_TRAN_CONFIG5, 0x00000000 }, + { CS42L43_TRAN_CONFIG6, 0x00000000 }, + { CS42L43_TRAN_CONFIG7, 0x00000000 }, + { CS42L43_TRAN_CONFIG8, 0x00000000 }, + { CS42L43_DACCNFG1, 0x00000008 }, + { CS42L43_DACCNFG2, 0x00000005 }, + { CS42L43_HPPATHVOL, 0x011B011B }, + { CS42L43_PGAVOL, 0x00003470 }, + { CS42L43_LOADDETENA, 0x00000000 }, + { CS42L43_CTRL, 0x00000037 }, + { CS42L43_COEFF_DATA_IN0, 0x00000000 }, + { CS42L43_COEFF_RD_WR0, 0x00000000 }, + { CS42L43_START_EQZ0, 0x00000000 }, + { CS42L43_MUTE_EQ_IN0, 0x00000000 }, + { CS42L43_DECIM_MASK, 0x0000000F }, + { CS42L43_EQ_MIX_MASK, 0x0000000F }, + { CS42L43_ASP_MASK, 0x000000FF }, + { CS42L43_PLL_MASK, 0x00000003 }, + { CS42L43_SOFT_MASK, 0x0000FFFF }, + { CS42L43_SWIRE_MASK, 0x00007FFF }, + { CS42L43_MSM_MASK, 0x00000FFF }, + { CS42L43_ACC_DET_MASK, 0x00000FFF }, + { CS42L43_I2C_TGT_MASK, 0x00000003 }, + { CS42L43_SPI_MSTR_MASK, 0x00000007 }, + { CS42L43_SW_TO_SPI_BRIDGE_MASK, 0x00000001 }, + { CS42L43_OTP_MASK, 0x00000007 }, + { CS42L43_CLASS_D_AMP_MASK, 0x00003FFF }, + { CS42L43_GPIO_INT_MASK, 0x0000003F }, + { CS42L43_ASRC_MASK, 0x0000000F }, + { CS42L43_HPOUT_MASK, 0x00000003 }, +}; + +static bool cs42l43_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CS42L43_DEVID: + case CS42L43_REVID: + case CS42L43_RELID: + case CS42L43_SFT_RESET: + case CS42L43_DRV_CTRL1: + case CS42L43_DRV_CTRL3: + case CS42L43_DRV_CTRL4: + case CS42L43_DRV_CTRL_5: + case CS42L43_GPIO_CTRL1: + case CS42L43_GPIO_CTRL2: + case CS42L43_GPIO_STS: + case CS42L43_GPIO_FN_SEL: + case CS42L43_MCLK_SRC_SEL: + case CS42L43_SAMPLE_RATE1 ... CS42L43_SAMPLE_RATE4: + case CS42L43_PLL_CONTROL: + case CS42L43_FS_SELECT1 ... CS42L43_FS_SELECT4: + case CS42L43_PDM_CONTROL: + case CS42L43_ASP_CLK_CONFIG1 ... CS42L43_ASP_CLK_CONFIG2: + case CS42L43_OSC_DIV_SEL: + case CS42L43_ADC_B_CTRL1 ... CS42L43_ADC_B_CTRL2: + case CS42L43_DECIM_HPF_WNF_CTRL1 ... CS42L43_DECIM_HPF_WNF_CTRL4: + case CS42L43_DMIC_PDM_CTRL: + case CS42L43_DECIM_VOL_CTRL_CH1_CH2 ... CS42L43_DECIM_VOL_CTRL_CH3_CH4: + case CS42L43_INTP_VOLUME_CTRL1 ... CS42L43_INTP_VOLUME_CTRL2: + case CS42L43_AMP1_2_VOL_RAMP: + case CS42L43_ASP_CTRL: + case CS42L43_ASP_FSYNC_CTRL1 ... CS42L43_ASP_FSYNC_CTRL4: + case CS42L43_ASP_DATA_CTRL: + case CS42L43_ASP_RX_EN ... CS42L43_ASP_TX_EN: + case CS42L43_ASP_RX_CH1_CTRL ... CS42L43_ASP_RX_CH6_CTRL: + case CS42L43_ASP_TX_CH1_CTRL ... CS42L43_ASP_TX_CH6_CTRL: + case CS42L43_OTP_REVISION_ID: + case CS42L43_ASPTX1_INPUT: + case CS42L43_ASPTX2_INPUT: + case CS42L43_ASPTX3_INPUT: + case CS42L43_ASPTX4_INPUT: + case CS42L43_ASPTX5_INPUT: + case CS42L43_ASPTX6_INPUT: + case CS42L43_SWIRE_DP1_CH1_INPUT: + case CS42L43_SWIRE_DP1_CH2_INPUT: + case CS42L43_SWIRE_DP1_CH3_INPUT: + case CS42L43_SWIRE_DP1_CH4_INPUT: + case CS42L43_SWIRE_DP2_CH1_INPUT: + case CS42L43_SWIRE_DP2_CH2_INPUT: + case CS42L43_SWIRE_DP3_CH1_INPUT: + case CS42L43_SWIRE_DP3_CH2_INPUT: + case CS42L43_SWIRE_DP4_CH1_INPUT: + case CS42L43_SWIRE_DP4_CH2_INPUT: + case CS42L43_ASRC_INT1_INPUT1: + case CS42L43_ASRC_INT2_INPUT1: + case CS42L43_ASRC_INT3_INPUT1: + case CS42L43_ASRC_INT4_INPUT1: + case CS42L43_ASRC_DEC1_INPUT1: + case CS42L43_ASRC_DEC2_INPUT1: + case CS42L43_ASRC_DEC3_INPUT1: + case CS42L43_ASRC_DEC4_INPUT1: + case CS42L43_ISRC1INT1_INPUT1: + case CS42L43_ISRC1INT2_INPUT1: + case CS42L43_ISRC1DEC1_INPUT1: + case CS42L43_ISRC1DEC2_INPUT1: + case CS42L43_ISRC2INT1_INPUT1: + case CS42L43_ISRC2INT2_INPUT1: + case CS42L43_ISRC2DEC1_INPUT1: + case CS42L43_ISRC2DEC2_INPUT1: + case CS42L43_EQ1MIX_INPUT1 ... CS42L43_EQ1MIX_INPUT4: + case CS42L43_EQ2MIX_INPUT1 ... CS42L43_EQ2MIX_INPUT4: + case CS42L43_SPDIF1_INPUT1: + case CS42L43_SPDIF2_INPUT1: + case CS42L43_AMP1MIX_INPUT1 ... CS42L43_AMP1MIX_INPUT4: + case CS42L43_AMP2MIX_INPUT1 ... CS42L43_AMP2MIX_INPUT4: + case CS42L43_AMP3MIX_INPUT1 ... CS42L43_AMP3MIX_INPUT4: + case CS42L43_AMP4MIX_INPUT1 ... CS42L43_AMP4MIX_INPUT4: + case CS42L43_ASRC_INT_ENABLES ... CS42L43_ASRC_DEC_ENABLES: + case CS42L43_PDNCNTL: + case CS42L43_RINGSENSE_DEB_CTRL: + case CS42L43_TIPSENSE_DEB_CTRL: + case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS: + case CS42L43_HS2: + case CS42L43_HS_STAT: + case CS42L43_MCU_SW_INTERRUPT: + case CS42L43_STEREO_MIC_CTRL: + case CS42L43_STEREO_MIC_CLAMP_CTRL: + case CS42L43_BLOCK_EN2 ... CS42L43_BLOCK_EN11: + case CS42L43_TONE_CH1_CTRL ... CS42L43_TONE_CH2_CTRL: + case CS42L43_MIC_DETECT_CONTROL_1: + case CS42L43_DETECT_STATUS_1: + case CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL: + case CS42L43_MIC_DETECT_CONTROL_ANDROID: + case CS42L43_ISRC1_CTRL: + case CS42L43_ISRC2_CTRL: + case CS42L43_CTRL_REG: + case CS42L43_FDIV_FRAC: + case CS42L43_CAL_RATIO: + case CS42L43_SPI_CLK_CONFIG1: + case CS42L43_SPI_CONFIG1 ... CS42L43_SPI_CONFIG4: + case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2: + case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG8: + case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3: + case CS42L43_TX_DATA: + case CS42L43_RX_DATA: + case CS42L43_DACCNFG1 ... CS42L43_DACCNFG2: + case CS42L43_HPPATHVOL: + case CS42L43_PGAVOL: + case CS42L43_LOADDETRESULTS: + case CS42L43_LOADDETENA: + case CS42L43_CTRL: + case CS42L43_COEFF_DATA_IN0: + case CS42L43_COEFF_RD_WR0: + case CS42L43_INIT_DONE0: + case CS42L43_START_EQZ0: + case CS42L43_MUTE_EQ_IN0: + case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT: + case CS42L43_DECIM_MASK ... CS42L43_HPOUT_MASK: + case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW: + case CS42L43_BOOT_CONTROL: + case CS42L43_BLOCK_EN: + case CS42L43_SHUTTER_CONTROL: + case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX: + return true; + default: + return false; + } +} + +static bool cs42l43_precious_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CS42L43_SFT_RESET: + case CS42L43_TX_DATA: + case CS42L43_RX_DATA: + case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT: + case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX: + return true; + default: + return false; + } +} + +static bool cs42l43_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CS42L43_DEVID: + case CS42L43_REVID: + case CS42L43_RELID: + case CS42L43_GPIO_STS: + case CS42L43_OTP_REVISION_ID: + case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS: + case CS42L43_HS_STAT: + case CS42L43_MCU_SW_INTERRUPT: + case CS42L43_DETECT_STATUS_1: + case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2: + case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG2: + case CS42L43_TRAN_CONFIG8: + case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3: + case CS42L43_LOADDETRESULTS: + case CS42L43_INIT_DONE0: + case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW: + case CS42L43_BOOT_CONTROL: + case CS42L43_BLOCK_EN: + return true; + default: + return cs42l43_precious_register(dev, reg); + } +} + +#if IS_ENABLED(CONFIG_MFD_CS42L43_I2C) +const struct regmap_config cs42l43_i2c_regmap = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_BIG, + + .max_register = CS42L43_MCU_RAM_MAX, + .readable_reg = cs42l43_readable_register, + .volatile_reg = cs42l43_volatile_register, + .precious_reg = cs42l43_precious_register, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = cs42l43_reg_default, + .num_reg_defaults = ARRAY_SIZE(cs42l43_reg_default), +}; +EXPORT_SYMBOL_NS_GPL(cs42l43_i2c_regmap, MFD_CS42L43); +#endif + +#if IS_ENABLED(CONFIG_MFD_CS42L43_SDW) +const struct regmap_config cs42l43_sdw_regmap = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + + .max_register = CS42L43_MCU_RAM_MAX, + .readable_reg = cs42l43_readable_register, + .volatile_reg = cs42l43_volatile_register, + .precious_reg = cs42l43_precious_register, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = cs42l43_reg_default, + .num_reg_defaults = ARRAY_SIZE(cs42l43_reg_default), +}; +EXPORT_SYMBOL_NS_GPL(cs42l43_sdw_regmap, MFD_CS42L43); +#endif + +static const char * const cs42l43_core_supplies[] = { + "VDD_A", "VDD_IO", "VDD_CP", +}; + +static const char * const cs42l43_parent_supplies[] = { "VDD_AMP" }; + +static const struct mfd_cell cs42l43_devs[] = { + { .name = "cs42l43-pinctrl", }, + { .name = "cs42l43-irq", }, + { .name = "cs42l43-spi", }, + { + .name = "cs42l43-codec", + .parent_supplies = cs42l43_parent_supplies, + .num_parent_supplies = ARRAY_SIZE(cs42l43_parent_supplies), + }, +}; + +static int cs42l43_soft_reset(struct cs42l43 *cs42l43) +{ + static const struct reg_sequence reset[] = { + { CS42L43_SFT_RESET, 0x5A000000 }, + }; + unsigned long time; + + dev_dbg(cs42l43->dev, "Soft resetting\n"); + + reinit_completion(&cs42l43->device_detach); + + /* apply cache only as the device will also fall off the soundwire bus */ + regcache_cache_only(cs42l43->regmap, true); + regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset)); + + msleep(20); + + if (cs42l43->sdw) { + time = wait_for_completion_timeout(&cs42l43->device_detach, + msecs_to_jiffies(100)); + if (!time) { + dev_err(cs42l43->dev, "Timed out waiting for device detach\n"); + return -ETIMEDOUT; + } + } + + return -EAGAIN; +} + +static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43) +{ + unsigned long time; + + if (!cs42l43->attached) { + time = wait_for_completion_timeout(&cs42l43->device_attach, + msecs_to_jiffies(500)); + if (!time) { + dev_err(cs42l43->dev, "Timed out waiting for device re-attach\n"); + return -ETIMEDOUT; + } + } + + regcache_cache_only(cs42l43->regmap, false); + + // Must enable OSC_DIV before doing any SoundWire reads + if (cs42l43->sdw) + regmap_write(cs42l43->regmap, CS42L43_OSC_DIV_SEL, 0x1); + + return 0; +} + +static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow) +{ + unsigned int need_reg = CS42L43_NEED_CONFIGS; + unsigned int val; + int ret; + + dev_dbg(cs42l43->dev, "Moving firmware to stage 3\n"); + + if (shadow) + need_reg = CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS; + + regmap_write(cs42l43->regmap, need_reg, 0x0); + + ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS, + val, (val == 3), 5000, 20000); + if (ret) { + dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val); + return ret; + } + + return -EAGAIN; +} + +static int cs42l43_mcu_stage_3_2(struct cs42l43 *cs42l43) +{ + dev_dbg(cs42l43->dev, "Returning firmware to stage 2\n"); + + regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_NEED_CONFIGS, + CS42L43_FW_PATCH_NEED_CFG_MASK); + regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_HAVE_CONFIGS, 0x0); + + return cs42l43_soft_reset(cs42l43); +} + +static int cs42l43_mcu_disable(struct cs42l43 *cs42l43) +{ + unsigned int val; + int ret; + + dev_dbg(cs42l43->dev, "Disabling firmware\n"); + + regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_MM_MCU_CFG_REG, 0xF05AA50F); + regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_MM_CTRL_SELECTION, 0x1); + regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_CONTROL_IND_MASK); + regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0); + + ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val, + (val & CS42L43_CONTROL_APPLIED_INT_MASK), + 5000, 20000); + if (ret) { + dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val); + return ret; + } + + /* Soft reset to clear any register state the firmware left behind */ + return cs42l43_soft_reset(cs42l43); +} + +struct cs42l43_patch_header { + __le16 version; + __le16 size; + u8 reserved; + u8 secure; + __le16 bss_size; + __le32 apply_addr; + __le32 checksum; + __le32 sha; + __le16 swrev; + __le16 patchid; + __le16 ipxid; + __le16 romver; + __le32 load_addr; +} __packed; + +static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *context) +{ + struct cs42l43 *cs42l43 = context; + struct cs42l43_patch_header *hdr; + unsigned int loadaddr, val; + int ret; + + if (!firmware) { + dev_err(cs42l43->dev, "Failed to load firmware\n"); + cs42l43->firmware_error = -ENODEV; + goto err; + } + + dev_dbg(cs42l43->dev, "Updating firmware\n"); + + hdr = (void *)&firmware->data[0]; + loadaddr = le32_to_cpu(hdr->load_addr); + + if (le16_to_cpu(hdr->version) != 0x3) { + dev_err(cs42l43->dev, "Bad firmware file format: %d\n", hdr->version); + cs42l43->firmware_error = -EINVAL; + goto err_release; + } + + regmap_write(cs42l43->regmap, CS42L43_PATCH_START_ADDR, loadaddr); + regmap_bulk_write(cs42l43->regmap, loadaddr + 0x100000, + &firmware->data[0], firmware->size / sizeof(u32)); + + regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_PATCH_IND_MASK); + regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0); + + ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val, + (val & CS42L43_PATCH_APPLIED_INT_MASK), + 5000, 500000); + if (ret) { + dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val); + cs42l43->firmware_error = ret; + goto err_release; + } + +err_release: + release_firmware(firmware); +err: + complete(&cs42l43->firmware_download); +} + +static int cs42l43_mcu_update_step(struct cs42l43 *cs42l43) +{ + unsigned int mcu_rev, bios_rev, boot_status, secure_cfg; + bool patched, shadow; + int ret; + + // Clear any stale software interrupt bits + regmap_read(cs42l43->regmap, CS42L43_SOFT_INT, &mcu_rev); + + ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_STATUS, &boot_status); + if (ret) { + dev_err(cs42l43->dev, "Failed to read boot status: %d\n", ret); + return ret; + } + + ret = regmap_read(cs42l43->regmap, CS42L43_MCU_SW_REV, &mcu_rev); + if (ret) { + dev_err(cs42l43->dev, "Failed to read firmware revision: %d\n", ret); + return ret; + } + + bios_rev = ((mcu_rev & CS42L43_BIOS_MAJOR_REV_MASK) << 12) | + ((mcu_rev & CS42L43_BIOS_MINOR_REV_MASK) << 4) | + ((mcu_rev & CS42L43_BIOS_SUBMINOR_REV_MASK) >> 8); + mcu_rev = ((mcu_rev & CS42L43_FW_MAJOR_REV_MASK) << 12) | + ((mcu_rev & CS42L43_FW_MINOR_REV_MASK) << 4) | + ((mcu_rev & CS42L43_FW_SUBMINOR_REV_MASK) >> 8); + + patched = mcu_rev >= 0x2105 || bios_rev > 0x0000; + shadow = mcu_rev >= 0x2200; + + ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_CONTROL, &secure_cfg); + if (ret) { + dev_err(cs42l43->dev, "Failed to read security settings: %d\n", ret); + return ret; + } + + cs42l43->hw_lock = secure_cfg & CS42L43_LOCK_HW_STS_MASK; + + if (!patched && cs42l43->hw_lock) { + dev_err(cs42l43->dev, "Unpatched secure device\n"); + return -EPERM; + } + + dev_dbg(cs42l43->dev, "Firmware(0x%x) in boot stage %d\n", mcu_rev, boot_status); + + switch (boot_status) { + case 2: + if (!patched) { + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + "cs42l43.bin", cs42l43->dev, + GFP_KERNEL, cs42l43, + cs42l43_mcu_load_firmware); + if (ret) { + dev_err(cs42l43->dev, "Failed to request firmware: %d\n", ret); + return ret; + } + + wait_for_completion(&cs42l43->firmware_download); + + if (cs42l43->firmware_error) + return cs42l43->firmware_error; + + return -EAGAIN; + } else { + return cs42l43_mcu_stage_2_3(cs42l43, shadow); + } + case 3: + if (patched) + return cs42l43_mcu_disable(cs42l43); + else + return cs42l43_mcu_stage_3_2(cs42l43); + case 4: + return 0; + default: + dev_err(cs42l43->dev, "Invalid boot status: %d\n", boot_status); + return -EINVAL; + } +} + +static int cs42l43_mcu_update(struct cs42l43 *cs42l43) +{ + const int update_retries = 5; + int i, ret; + + for (i = 0; i < update_retries; i++) { + ret = cs42l43_mcu_update_step(cs42l43); + if (ret != -EAGAIN) + return ret; + + ret = cs42l43_wait_for_attach(cs42l43); + if (ret) + return ret; + } + + dev_err(cs42l43->dev, "Failed retrying update\n"); + return -ETIMEDOUT; +} + +static void cs42l43_boot_work(struct work_struct *work) +{ + struct cs42l43 *cs42l43 = container_of(work, struct cs42l43, boot_work); + unsigned int devid, revid, otp; + int ret; + + dev_dbg(cs42l43->dev, "Boot work running\n"); + + ret = cs42l43_wait_for_attach(cs42l43); + if (ret) + goto err; + + if (cs42l43->sdw) + cs42l43->irq = cs42l43->sdw->irq; + + ret = regmap_read(cs42l43->regmap, CS42L43_DEVID, &devid); + if (ret) { + dev_err(cs42l43->dev, "Failed to read devid: %d\n", ret); + goto err; + } + + switch (devid) { + case 0x42a43: + break; + default: + dev_err(cs42l43->dev, "Unrecognised devid: 0x%06x\n", devid); + goto err; + } + + ret = regmap_read(cs42l43->regmap, CS42L43_REVID, &revid); + if (ret) { + dev_err(cs42l43->dev, "Failed to read rev: %d\n", ret); + goto err; + } + + ret = regmap_read(cs42l43->regmap, CS42L43_OTP_REVISION_ID, &otp); + if (ret) { + dev_err(cs42l43->dev, "Failed to read otp rev: %d\n", ret); + goto err; + } + + dev_info(cs42l43->dev, + "devid: 0x%06x, rev: 0x%02x, otp: 0x%02x\n", devid, revid, otp); + + ret = cs42l43_mcu_update(cs42l43); + if (ret) + goto err; + + ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch, + ARRAY_SIZE(cs42l43_reva_patch)); + if (ret) { + dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret); + goto err; + } + + pm_runtime_mark_last_busy(cs42l43->dev); + pm_runtime_put_autosuspend(cs42l43->dev); + + ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE, + cs42l43_devs, ARRAY_SIZE(cs42l43_devs), + NULL, 0, NULL); + if (ret) { + dev_err(cs42l43->dev, "Failed to add subdevices: %d\n", ret); + goto err; + } + + dev_dbg(cs42l43->dev, "Successfully initialised\n"); + + return; + +err: + pm_runtime_put_sync(cs42l43->dev); + cs42l43_dev_remove(cs42l43); +} + +static int cs42l43_power_up(struct cs42l43 *cs42l43) +{ + int ret; + + ret = regulator_enable(cs42l43->vdd_p); + if (ret) { + dev_err(cs42l43->dev, "Failed to enable VDD_P: %d\n", ret); + return ret; + } + + usleep_range(50, 100); /* VDD_P must be on for 50uS before any other supply */ + + gpiod_set_value_cansleep(cs42l43->reset, 1); + + ret = regulator_bulk_enable(CS42L43_N_SUPPLIES, cs42l43->core_supplies); + if (ret) { + dev_err(cs42l43->dev, "Failed to enable core supplies: %d\n", ret); + goto err_reset; + } + + ret = regulator_enable(cs42l43->vdd_d); + if (ret) { + dev_err(cs42l43->dev, "Failed to enable VDD_D: %d\n", ret); + goto err_core_supplies; + } + + usleep_range(1000, 2000); + + dev_dbg(cs42l43->dev, "Powered up\n"); + + return 0; + +err_core_supplies: + regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies); +err_reset: + gpiod_set_value_cansleep(cs42l43->reset, 0); + regulator_disable(cs42l43->vdd_p); + + return ret; +} + +static int cs42l43_power_down(struct cs42l43 *cs42l43) +{ + int ret; + + ret = regulator_disable(cs42l43->vdd_d); + if (ret) { + dev_err(cs42l43->dev, "Failed to disable VDD_D: %d\n", ret); + return ret; + } + + ret = regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies); + if (ret) { + dev_err(cs42l43->dev, "Failed to disable core supplies: %d\n", ret); + return ret; + } + + gpiod_set_value_cansleep(cs42l43->reset, 0); + + ret = regulator_disable(cs42l43->vdd_p); + if (ret) { + dev_err(cs42l43->dev, "Failed to disable VDD_P: %d\n", ret); + return ret; + } + + dev_dbg(cs42l43->dev, "Powered down\n"); + + return 0; +} + +int cs42l43_dev_probe(struct cs42l43 *cs42l43) +{ + int i, ret; + + dev_set_drvdata(cs42l43->dev, cs42l43); + + mutex_init(&cs42l43->pll_lock); + init_completion(&cs42l43->device_attach); + init_completion(&cs42l43->device_detach); + init_completion(&cs42l43->firmware_download); + INIT_WORK(&cs42l43->boot_work, cs42l43_boot_work); + + regcache_cache_only(cs42l43->regmap, true); + + cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(cs42l43->reset)) { + ret = PTR_ERR(cs42l43->reset); + dev_err(cs42l43->dev, "Failed to get reset: %d\n", ret); + return ret; + } + + cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "VDD_P"); + if (IS_ERR(cs42l43->vdd_p)) { + ret = PTR_ERR(cs42l43->vdd_p); + dev_err(cs42l43->dev, "Failed to get VDD_P: %d\n", ret); + return ret; + } + + cs42l43->vdd_d = devm_regulator_get(cs42l43->dev, "VDD_D"); + if (IS_ERR(cs42l43->vdd_d)) { + ret = PTR_ERR(cs42l43->vdd_d); + dev_err(cs42l43->dev, "Failed to get VDD_D: %d\n", ret); + return ret; + } + + BUILD_BUG_ON(ARRAY_SIZE(cs42l43_core_supplies) != CS42L43_N_SUPPLIES); + + for (i = 0; i < CS42L43_N_SUPPLIES; i++) + cs42l43->core_supplies[i].supply = cs42l43_core_supplies[i]; + + ret = devm_regulator_bulk_get(cs42l43->dev, CS42L43_N_SUPPLIES, + cs42l43->core_supplies); + if (ret) { + dev_err(cs42l43->dev, "Failed to get core supplies: %d\n", ret); + return ret; + } + + ret = cs42l43_power_up(cs42l43); + if (ret) + return ret; + + pm_runtime_set_autosuspend_delay(cs42l43->dev, 250); + pm_runtime_use_autosuspend(cs42l43->dev); + pm_runtime_set_active(cs42l43->dev); + pm_runtime_get_noresume(cs42l43->dev); + pm_runtime_enable(cs42l43->dev); + + queue_work(system_long_wq, &cs42l43->boot_work); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(cs42l43_dev_probe, MFD_CS42L43); + +void cs42l43_dev_remove(struct cs42l43 *cs42l43) +{ + pm_runtime_disable(cs42l43->dev); + cs42l43_power_down(cs42l43); +} +EXPORT_SYMBOL_NS_GPL(cs42l43_dev_remove, MFD_CS42L43); + +static int __maybe_unused cs42l43_suspend(struct device *dev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(dev); + int ret; + + dev_dbg(cs42l43->dev, "System suspend\n"); + + /* + * Don't care about being resumed here, but we do want force_resume to + * always trigger an actual resume, so that register state for the + * MCU/GPIOs is returned as soon as possible after system resume + */ + pm_runtime_get_noresume(dev); + + ret = pm_runtime_force_suspend(dev); + if (ret) { + dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret); + return ret; + } + + pm_runtime_put_noidle(dev); + + ret = cs42l43_power_down(cs42l43); + if (ret) + return ret; + + return 0; +} + +static int __maybe_unused cs42l43_resume(struct device *dev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(dev); + int ret; + + dev_dbg(cs42l43->dev, "System resume\n"); + + ret = cs42l43_power_up(cs42l43); + if (ret) + return ret; + + ret = pm_runtime_force_resume(dev); + if (ret) { + dev_err(cs42l43->dev, "Failed to force resume: %d\n", ret); + return ret; + } + + return 0; +} + +static int __maybe_unused cs42l43_runtime_suspend(struct device *dev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(dev); + + dev_dbg(cs42l43->dev, "Runtime suspend\n"); + + /* + * Whilst we don't power the chip down here, going into runtime + * suspend lets the SoundWire bus power down, which means we can't + * communicate with the device any more. + */ + regcache_cache_only(cs42l43->regmap, true); + + return 0; +} + +static int __maybe_unused cs42l43_runtime_resume(struct device *dev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(dev); + unsigned int reset_canary; + int ret; + + dev_dbg(cs42l43->dev, "Runtime resume\n"); + + ret = cs42l43_wait_for_attach(cs42l43); + if (ret) + return ret; + + ret = regmap_read(cs42l43->regmap, CS42L43_RELID, &reset_canary); + if (ret) { + dev_err(cs42l43->dev, "Failed to check reset canary: %d\n", ret); + goto err; + } + + if (!reset_canary) { + /* + * If the canary has cleared the chip has reset, re-handle the + * MCU and mark the cache as dirty to indicate the chip reset. + */ + ret = cs42l43_mcu_update(cs42l43); + if (ret) + goto err; + + regcache_mark_dirty(cs42l43->regmap); + } + + ret = regcache_sync(cs42l43->regmap); + if (ret) { + dev_err(cs42l43->dev, "Failed to restore register cache: %d\n", ret); + goto err; + } + + return 0; + +err: + regcache_cache_only(cs42l43->regmap, true); + + return ret; +} + +const struct dev_pm_ops cs42l43_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cs42l43_suspend, cs42l43_resume) + SET_RUNTIME_PM_OPS(cs42l43_runtime_suspend, cs42l43_runtime_resume, NULL) +}; +EXPORT_SYMBOL_NS_GPL(cs42l43_pm_ops, MFD_CS42L43); + +MODULE_DESCRIPTION("CS42L43 Core Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/cs42l43.h b/drivers/mfd/cs42l43.h new file mode 100644 index 0000000000000..9983d6f13f1f5 --- /dev/null +++ b/drivers/mfd/cs42l43.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CS42L43 core driver internal data + * + * Copyright (C) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#include <linux/mfd/cs42l43.h> +#include <linux/pm.h> +#include <linux/regmap.h> + +#ifndef CS42L43_CORE_INT_H +#define CS42L43_CORE_INT_H + +extern const struct regmap_config cs42l43_i2c_regmap; +extern const struct regmap_config cs42l43_sdw_regmap; +extern const struct dev_pm_ops cs42l43_pm_ops; + +int cs42l43_dev_probe(struct cs42l43 *cs42l43); +void cs42l43_dev_remove(struct cs42l43 *cs42l43); + +#endif /* CS42L43_CORE_INT_H */ diff --git a/include/linux/mfd/cs42l43-regs.h b/include/linux/mfd/cs42l43-regs.h new file mode 100644 index 0000000000000..91c83d36f5b71 --- /dev/null +++ b/include/linux/mfd/cs42l43-regs.h @@ -0,0 +1,1172 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * cs42l43 register definitions + * + * Copyright (c) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#ifndef CS42L43_CORE_REGS_H +#define CS42L43_CORE_REGS_H + +/* Registers */ +#define CS42L43_GEN_INT_STAT_1 0x000000C0 +#define CS42L43_GEN_INT_MASK_1 0x000000C1 +#define CS42L43_DEVID 0x00003000 +#define CS42L43_REVID 0x00003004 +#define CS42L43_RELID 0x0000300C +#define CS42L43_SFT_RESET 0x00003020 +#define CS42L43_DRV_CTRL1 0x00006004 +#define CS42L43_DRV_CTRL3 0x0000600C +#define CS42L43_DRV_CTRL4 0x00006010 +#define CS42L43_DRV_CTRL_5 0x00006014 +#define CS42L43_GPIO_CTRL1 0x00006034 +#define CS42L43_GPIO_CTRL2 0x00006038 +#define CS42L43_GPIO_STS 0x0000603C +#define CS42L43_GPIO_FN_SEL 0x00006040 +#define CS42L43_MCLK_SRC_SEL 0x00007004 +#define CS42L43_CCM_BLK_CLK_CONTROL 0x00007010 +#define CS42L43_SAMPLE_RATE1 0x00007014 +#define CS42L43_SAMPLE_RATE2 0x00007018 +#define CS42L43_SAMPLE_RATE3 0x0000701C +#define CS42L43_SAMPLE_RATE4 0x00007020 +#define CS42L43_PLL_CONTROL 0x00007034 +#define CS42L43_FS_SELECT1 0x00007038 +#define CS42L43_FS_SELECT2 0x0000703C +#define CS42L43_FS_SELECT3 0x00007040 +#define CS42L43_FS_SELECT4 0x00007044 +#define CS42L43_PDM_CONTROL 0x0000704C +#define CS42L43_ASP_CLK_CONFIG1 0x00007058 +#define CS42L43_ASP_CLK_CONFIG2 0x0000705C +#define CS42L43_OSC_DIV_SEL 0x00007068 +#define CS42L43_ADC_B_CTRL1 0x00008000 +#define CS42L43_ADC_B_CTRL2 0x00008004 +#define CS42L43_DECIM_HPF_WNF_CTRL1 0x0000803C +#define CS42L43_DECIM_HPF_WNF_CTRL2 0x00008040 +#define CS42L43_DECIM_HPF_WNF_CTRL3 0x00008044 +#define CS42L43_DECIM_HPF_WNF_CTRL4 0x00008048 +#define CS42L43_DMIC_PDM_CTRL 0x0000804C +#define CS42L43_DECIM_VOL_CTRL_CH1_CH2 0x00008050 +#define CS42L43_DECIM_VOL_CTRL_CH3_CH4 0x00008054 +#define CS42L43_DECIM_VOL_CTRL_UPDATE 0x00008058 +#define CS42L43_INTP_VOLUME_CTRL1 0x00009008 +#define CS42L43_INTP_VOLUME_CTRL2 0x0000900C +#define CS42L43_AMP1_2_VOL_RAMP 0x00009010 +#define CS42L43_ASP_CTRL 0x0000A000 +#define CS42L43_ASP_FSYNC_CTRL1 0x0000A004 +#define CS42L43_ASP_FSYNC_CTRL2 0x0000A008 +#define CS42L43_ASP_FSYNC_CTRL3 0x0000A00C +#define CS42L43_ASP_FSYNC_CTRL4 0x0000A010 +#define CS42L43_ASP_DATA_CTRL 0x0000A018 +#define CS42L43_ASP_RX_EN 0x0000A020 +#define CS42L43_ASP_TX_EN 0x0000A024 +#define CS42L43_ASP_RX_CH1_CTRL 0x0000A028 +#define CS42L43_ASP_RX_CH2_CTRL 0x0000A02C +#define CS42L43_ASP_RX_CH3_CTRL 0x0000A030 +#define CS42L43_ASP_RX_CH4_CTRL 0x0000A034 +#define CS42L43_ASP_RX_CH5_CTRL 0x0000A038 +#define CS42L43_ASP_RX_CH6_CTRL 0x0000A03C +#define CS42L43_ASP_TX_CH1_CTRL 0x0000A068 +#define CS42L43_ASP_TX_CH2_CTRL 0x0000A06C +#define CS42L43_ASP_TX_CH3_CTRL 0x0000A070 +#define CS42L43_ASP_TX_CH4_CTRL 0x0000A074 +#define CS42L43_ASP_TX_CH5_CTRL 0x0000A078 +#define CS42L43_ASP_TX_CH6_CTRL 0x0000A07C +#define CS42L43_OTP_REVISION_ID 0x0000B02C +#define CS42L43_ASPTX1_INPUT 0x0000C200 +#define CS42L43_ASPTX2_INPUT 0x0000C210 +#define CS42L43_ASPTX3_INPUT 0x0000C220 +#define CS42L43_ASPTX4_INPUT 0x0000C230 +#define CS42L43_ASPTX5_INPUT 0x0000C240 +#define CS42L43_ASPTX6_INPUT 0x0000C250 +#define CS42L43_SWIRE_DP1_CH1_INPUT 0x0000C280 +#define CS42L43_SWIRE_DP1_CH2_INPUT 0x0000C290 +#define CS42L43_SWIRE_DP1_CH3_INPUT 0x0000C2A0 +#define CS42L43_SWIRE_DP1_CH4_INPUT 0x0000C2B0 +#define CS42L43_SWIRE_DP2_CH1_INPUT 0x0000C2C0 +#define CS42L43_SWIRE_DP2_CH2_INPUT 0x0000C2D0 +#define CS42L43_SWIRE_DP3_CH1_INPUT 0x0000C2E0 +#define CS42L43_SWIRE_DP3_CH2_INPUT 0x0000C2F0 +#define CS42L43_SWIRE_DP4_CH1_INPUT 0x0000C300 +#define CS42L43_SWIRE_DP4_CH2_INPUT 0x0000C310 +#define CS42L43_ASRC_INT1_INPUT1 0x0000C400 +#define CS42L43_ASRC_INT2_INPUT1 0x0000C410 +#define CS42L43_ASRC_INT3_INPUT1 0x0000C420 +#define CS42L43_ASRC_INT4_INPUT1 0x0000C430 +#define CS42L43_ASRC_DEC1_INPUT1 0x0000C440 +#define CS42L43_ASRC_DEC2_INPUT1 0x0000C450 +#define CS42L43_ASRC_DEC3_INPUT1 0x0000C460 +#define CS42L43_ASRC_DEC4_INPUT1 0x0000C470 +#define CS42L43_ISRC1INT1_INPUT1 0x0000C500 +#define CS42L43_ISRC1INT2_INPUT1 0x0000C510 +#define CS42L43_ISRC1DEC1_INPUT1 0x0000C520 +#define CS42L43_ISRC1DEC2_INPUT1 0x0000C530 +#define CS42L43_ISRC2INT1_INPUT1 0x0000C540 +#define CS42L43_ISRC2INT2_INPUT1 0x0000C550 +#define CS42L43_ISRC2DEC1_INPUT1 0x0000C560 +#define CS42L43_ISRC2DEC2_INPUT1 0x0000C570 +#define CS42L43_EQ1MIX_INPUT1 0x0000C580 +#define CS42L43_EQ1MIX_INPUT2 0x0000C584 +#define CS42L43_EQ1MIX_INPUT3 0x0000C588 +#define CS42L43_EQ1MIX_INPUT4 0x0000C58C +#define CS42L43_EQ2MIX_INPUT1 0x0000C590 +#define CS42L43_EQ2MIX_INPUT2 0x0000C594 +#define CS42L43_EQ2MIX_INPUT3 0x0000C598 +#define CS42L43_EQ2MIX_INPUT4 0x0000C59C +#define CS42L43_SPDIF1_INPUT1 0x0000C600 +#define CS42L43_SPDIF2_INPUT1 0x0000C610 +#define CS42L43_AMP1MIX_INPUT1 0x0000C620 +#define CS42L43_AMP1MIX_INPUT2 0x0000C624 +#define CS42L43_AMP1MIX_INPUT3 0x0000C628 +#define CS42L43_AMP1MIX_INPUT4 0x0000C62C +#define CS42L43_AMP2MIX_INPUT1 0x0000C630 +#define CS42L43_AMP2MIX_INPUT2 0x0000C634 +#define CS42L43_AMP2MIX_INPUT3 0x0000C638 +#define CS42L43_AMP2MIX_INPUT4 0x0000C63C +#define CS42L43_AMP3MIX_INPUT1 0x0000C640 +#define CS42L43_AMP3MIX_INPUT2 0x0000C644 +#define CS42L43_AMP3MIX_INPUT3 0x0000C648 +#define CS42L43_AMP3MIX_INPUT4 0x0000C64C +#define CS42L43_AMP4MIX_INPUT1 0x0000C650 +#define CS42L43_AMP4MIX_INPUT2 0x0000C654 +#define CS42L43_AMP4MIX_INPUT3 0x0000C658 +#define CS42L43_AMP4MIX_INPUT4 0x0000C65C +#define CS42L43_ASRC_INT_ENABLES 0x0000E000 +#define CS42L43_ASRC_DEC_ENABLES 0x0000E004 +#define CS42L43_PDNCNTL 0x00010000 +#define CS42L43_RINGSENSE_DEB_CTRL 0x0001001C +#define CS42L43_TIPSENSE_DEB_CTRL 0x00010020 +#define CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS 0x00010028 +#define CS42L43_HS2 0x00010040 +#define CS42L43_HS_STAT 0x00010048 +#define CS42L43_MCU_SW_INTERRUPT 0x00010094 +#define CS42L43_STEREO_MIC_CTRL 0x000100A4 +#define CS42L43_STEREO_MIC_CLAMP_CTRL 0x000100C4 +#define CS42L43_BLOCK_EN2 0x00010104 +#define CS42L43_BLOCK_EN3 0x00010108 +#define CS42L43_BLOCK_EN4 0x0001010C +#define CS42L43_BLOCK_EN5 0x00010110 +#define CS42L43_BLOCK_EN6 0x00010114 +#define CS42L43_BLOCK_EN7 0x00010118 +#define CS42L43_BLOCK_EN8 0x0001011C +#define CS42L43_BLOCK_EN9 0x00010120 +#define CS42L43_BLOCK_EN10 0x00010124 +#define CS42L43_BLOCK_EN11 0x00010128 +#define CS42L43_TONE_CH1_CTRL 0x00010134 +#define CS42L43_TONE_CH2_CTRL 0x00010138 +#define CS42L43_MIC_DETECT_CONTROL_1 0x00011074 +#define CS42L43_DETECT_STATUS_1 0x0001107C +#define CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL 0x00011090 +#define CS42L43_MIC_DETECT_CONTROL_ANDROID 0x000110B0 +#define CS42L43_ISRC1_CTRL 0x00012004 +#define CS42L43_ISRC2_CTRL 0x00013004 +#define CS42L43_CTRL_REG 0x00014000 +#define CS42L43_FDIV_FRAC 0x00014004 +#define CS42L43_CAL_RATIO 0x00014008 +#define CS42L43_SPI_CLK_CONFIG1 0x00016004 +#define CS42L43_SPI_CONFIG1 0x00016010 +#define CS42L43_SPI_CONFIG2 0x00016014 +#define CS42L43_SPI_CONFIG3 0x00016018 +#define CS42L43_SPI_CONFIG4 0x00016024 +#define CS42L43_SPI_STATUS1 0x00016100 +#define CS42L43_SPI_STATUS2 0x00016104 +#define CS42L43_TRAN_CONFIG1 0x00016200 +#define CS42L43_TRAN_CONFIG2 0x00016204 +#define CS42L43_TRAN_CONFIG3 0x00016208 +#define CS42L43_TRAN_CONFIG4 0x0001620C +#define CS42L43_TRAN_CONFIG5 0x00016220 +#define CS42L43_TRAN_CONFIG6 0x00016224 +#define CS42L43_TRAN_CONFIG7 0x00016228 +#define CS42L43_TRAN_CONFIG8 0x0001622C +#define CS42L43_TRAN_STATUS1 0x00016300 +#define CS42L43_TRAN_STATUS2 0x00016304 +#define CS42L43_TRAN_STATUS3 0x00016308 +#define CS42L43_TX_DATA 0x00016400 +#define CS42L43_RX_DATA 0x00016600 +#define CS42L43_DACCNFG1 0x00017000 +#define CS42L43_DACCNFG2 0x00017004 +#define CS42L43_HPPATHVOL 0x0001700C +#define CS42L43_PGAVOL 0x00017014 +#define CS42L43_LOADDETRESULTS 0x00017018 +#define CS42L43_LOADDETENA 0x00017024 +#define CS42L43_CTRL 0x00017028 +#define CS42L43_COEFF_DATA_IN0 0x00018000 +#define CS42L43_COEFF_RD_WR0 0x00018008 +#define CS42L43_INIT_DONE0 0x00018010 +#define CS42L43_START_EQZ0 0x00018014 +#define CS42L43_MUTE_EQ_IN0 0x0001801C +#define CS42L43_DECIM_INT 0x0001B000 +#define CS42L43_EQ_INT 0x0001B004 +#define CS42L43_ASP_INT 0x0001B008 +#define CS42L43_PLL_INT 0x0001B00C +#define CS42L43_SOFT_INT 0x0001B010 +#define CS42L43_SWIRE_INT 0x0001B014 +#define CS42L43_MSM_INT 0x0001B018 +#define CS42L43_ACC_DET_INT 0x0001B01C +#define CS42L43_I2C_TGT_INT 0x0001B020 +#define CS42L43_SPI_MSTR_INT 0x0001B024 +#define CS42L43_SW_TO_SPI_BRIDGE_INT 0x0001B028 +#define CS42L43_OTP_INT 0x0001B02C +#define CS42L43_CLASS_D_AMP_INT 0x0001B030 +#define CS42L43_GPIO_INT 0x0001B034 +#define CS42L43_ASRC_INT 0x0001B038 +#define CS42L43_HPOUT_INT 0x0001B03C +#define CS42L43_DECIM_MASK 0x0001B0A0 +#define CS42L43_EQ_MIX_MASK 0x0001B0A4 +#define CS42L43_ASP_MASK 0x0001B0A8 +#define CS42L43_PLL_MASK 0x0001B0AC +#define CS42L43_SOFT_MASK 0x0001B0B0 +#define CS42L43_SWIRE_MASK 0x0001B0B4 +#define CS42L43_MSM_MASK 0x0001B0B8 +#define CS42L43_ACC_DET_MASK 0x0001B0BC +#define CS42L43_I2C_TGT_MASK 0x0001B0C0 +#define CS42L43_SPI_MSTR_MASK 0x0001B0C4 +#define CS42L43_SW_TO_SPI_BRIDGE_MASK 0x0001B0C8 +#define CS42L43_OTP_MASK 0x0001B0CC +#define CS42L43_CLASS_D_AMP_MASK 0x0001B0D0 +#define CS42L43_GPIO_INT_MASK 0x0001B0D4 +#define CS42L43_ASRC_MASK 0x0001B0D8 +#define CS42L43_HPOUT_MASK 0x0001B0DC +#define CS42L43_DECIM_INT_SHADOW 0x0001B300 +#define CS42L43_EQ_MIX_INT_SHADOW 0x0001B304 +#define CS42L43_ASP_INT_SHADOW 0x0001B308 +#define CS42L43_PLL_INT_SHADOW 0x0001B30C +#define CS42L43_SOFT_INT_SHADOW 0x0001B310 +#define CS42L43_SWIRE_INT_SHADOW 0x0001B314 +#define CS42L43_MSM_INT_SHADOW 0x0001B318 +#define CS42L43_ACC_DET_INT_SHADOW 0x0001B31C +#define CS42L43_I2C_TGT_INT_SHADOW 0x0001B320 +#define CS42L43_SPI_MSTR_INT_SHADOW 0x0001B324 +#define CS42L43_SW_TO_SPI_BRIDGE_SHADOW 0x0001B328 +#define CS42L43_OTP_INT_SHADOW 0x0001B32C +#define CS42L43_CLASS_D_AMP_INT_SHADOW 0x0001B330 +#define CS42L43_GPIO_SHADOW 0x0001B334 +#define CS42L43_ASRC_SHADOW 0x0001B338 +#define CS42L43_HP_OUT_SHADOW 0x0001B33C +#define CS42L43_BOOT_CONTROL 0x00101000 +#define CS42L43_BLOCK_EN 0x00101008 +#define CS42L43_SHUTTER_CONTROL 0x0010100C +#define CS42L43_MCU_SW_REV 0x00114000 +#define CS42L43_PATCH_START_ADDR 0x00114004 +#define CS42L43_NEED_CONFIGS 0x0011400C +#define CS42L43_BOOT_STATUS 0x0011401C +#define CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS 0x0011F8F8 +#define CS42L43_FW_CTRL_NEED_CONFIGS 0x0011FE00 +#define CS42L43_FW_CTRL_HAVE_CONFIGS 0x0011FE04 +#define CS42L43_FW_CTRL_MM_CTRL_SELECTION 0x0011FE0C +#define CS42L43_FW_CTRL_MM_MCU_CFG_REG 0x0011FE10 +#define CS42L43_MCU_RAM_MAX 0x0011FFFF + +/* CS42L43_GEN_INT_STAT_1 */ +#define CS42L43_INT_STAT_GEN1_MASK 0x00000001 +#define CS42L43_INT_STAT_GEN1_SHIFT 0 + +/* CS42L43_SFT_RESET */ +#define CS42L43_SFT_RESET_MASK 0xFF000000 +#define CS42L43_SFT_RESET_SHIFT 24 + +/* CS42L43_DRV_CTRL1 */ +#define CS42L43_ASP_DOUT_DRV_MASK 0x00038000 +#define CS42L43_ASP_DOUT_DRV_SHIFT 15 +#define CS42L43_ASP_FSYNC_DRV_MASK 0x00000E00 +#define CS42L43_ASP_FSYNC_DRV_SHIFT 9 +#define CS42L43_ASP_BCLK_DRV_MASK 0x000001C0 +#define CS42L43_ASP_BCLK_DRV_SHIFT 6 + +/* CS42L43_DRV_CTRL3 */ +#define CS42L43_I2C_ADDR_DRV_MASK 0x30000000 +#define CS42L43_I2C_ADDR_DRV_SHIFT 28 +#define CS42L43_I2C_SDA_DRV_MASK 0x0C000000 +#define CS42L43_I2C_SDA_DRV_SHIFT 26 +#define CS42L43_PDMOUT2_CLK_DRV_MASK 0x00E00000 +#define CS42L43_PDMOUT2_CLK_DRV_SHIFT 21 +#define CS42L43_PDMOUT2_DATA_DRV_MASK 0x001C0000 +#define CS42L43_PDMOUT2_DATA_DRV_SHIFT 18 +#define CS42L43_PDMOUT1_CLK_DRV_MASK 0x00038000 +#define CS42L43_PDMOUT1_CLK_DRV_SHIFT 15 +#define CS42L43_PDMOUT1_DATA_DRV_MASK 0x00007000 +#define CS42L43_PDMOUT1_DATA_DRV_SHIFT 12 +#define CS42L43_SPI_MISO_DRV_MASK 0x00000038 +#define CS42L43_SPI_MISO_DRV_SHIFT 3 + +/* CS42L43_DRV_CTRL4 */ +#define CS42L43_GPIO3_DRV_MASK 0x00000E00 +#define CS42L43_GPIO3_DRV_SHIFT 9 +#define CS42L43_GPIO2_DRV_MASK 0x000001C0 +#define CS42L43_GPIO2_DRV_SHIFT 6 +#define CS42L43_GPIO1_DRV_MASK 0x00000038 +#define CS42L43_GPIO1_DRV_SHIFT 3 + +/* CS42L43_DRV_CTRL_5 */ +#define CS42L43_I2C_SCL_DRV_MASK 0x18000000 +#define CS42L43_I2C_SCL_DRV_SHIFT 27 +#define CS42L43_SPI_SCK_DRV_MASK 0x07000000 +#define CS42L43_SPI_SCK_DRV_SHIFT 24 +#define CS42L43_SPI_MOSI_DRV_MASK 0x00E00000 +#define CS42L43_SPI_MOSI_DRV_SHIFT 21 +#define CS42L43_SPI_SSB_DRV_MASK 0x001C0000 +#define CS42L43_SPI_SSB_DRV_SHIFT 18 +#define CS42L43_ASP_DIN_DRV_MASK 0x000001C0 +#define CS42L43_ASP_DIN_DRV_SHIFT 6 + +/* CS42L43_GPIO_CTRL1 */ +#define CS42L43_GPIO3_POL_MASK 0x00040000 +#define CS42L43_GPIO3_POL_SHIFT 18 +#define CS42L43_GPIO2_POL_MASK 0x00020000 +#define CS42L43_GPIO2_POL_SHIFT 17 +#define CS42L43_GPIO1_POL_MASK 0x00010000 +#define CS42L43_GPIO1_POL_SHIFT 16 +#define CS42L43_GPIO3_LVL_MASK 0x00000400 +#define CS42L43_GPIO3_LVL_SHIFT 10 +#define CS42L43_GPIO2_LVL_MASK 0x00000200 +#define CS42L43_GPIO2_LVL_SHIFT 9 +#define CS42L43_GPIO1_LVL_MASK 0x00000100 +#define CS42L43_GPIO1_LVL_SHIFT 8 +#define CS42L43_GPIO3_DIR_MASK 0x00000004 +#define CS42L43_GPIO3_DIR_SHIFT 2 +#define CS42L43_GPIO2_DIR_MASK 0x00000002 +#define CS42L43_GPIO2_DIR_SHIFT 1 +#define CS42L43_GPIO1_DIR_MASK 0x00000001 +#define CS42L43_GPIO1_DIR_SHIFT 0 + +/* CS42L43_GPIO_CTRL2 */ +#define CS42L43_GPIO3_DEGLITCH_BYP_MASK 0x00000004 +#define CS42L43_GPIO3_DEGLITCH_BYP_SHIFT 2 +#define CS42L43_GPIO2_DEGLITCH_BYP_MASK 0x00000002 +#define CS42L43_GPIO2_DEGLITCH_BYP_SHIFT 1 +#define CS42L43_GPIO1_DEGLITCH_BYP_MASK 0x00000001 +#define CS42L43_GPIO1_DEGLITCH_BYP_SHIFT 0 + +/* CS42L43_GPIO_STS */ +#define CS42L43_GPIO3_STS_MASK 0x00000004 +#define CS42L43_GPIO3_STS_SHIFT 2 +#define CS42L43_GPIO2_STS_MASK 0x00000002 +#define CS42L43_GPIO2_STS_SHIFT 1 +#define CS42L43_GPIO1_STS_MASK 0x00000001 +#define CS42L43_GPIO1_STS_SHIFT 0 + +/* CS42L43_GPIO_FN_SEL */ +#define CS42L43_GPIO3_FN_SEL_MASK 0x00000004 +#define CS42L43_GPIO3_FN_SEL_SHIFT 2 +#define CS42L43_GPIO1_FN_SEL_MASK 0x00000001 +#define CS42L43_GPIO1_FN_SEL_SHIFT 0 + +/* CS42L43_MCLK_SRC_SEL */ +#define CS42L43_OSC_PLL_MCLK_SEL_MASK 0x00000001 +#define CS42L43_OSC_PLL_MCLK_SEL_SHIFT 0 + +/* CS42L43_SAMPLE_RATE1..CS42L43_SAMPLE_RATE4 */ +#define CS42L43_SAMPLE_RATE_MASK 0x0000001F +#define CS42L43_SAMPLE_RATE_SHIFT 0 + +/* CS42L43_PLL_CONTROL */ +#define CS42L43_PLL_REFCLK_EN_MASK 0x00000008 +#define CS42L43_PLL_REFCLK_EN_SHIFT 3 +#define CS42L43_PLL_REFCLK_DIV_MASK 0x00000006 +#define CS42L43_PLL_REFCLK_DIV_SHIFT 1 +#define CS42L43_PLL_REFCLK_SRC_MASK 0x00000001 +#define CS42L43_PLL_REFCLK_SRC_SHIFT 0 + +/* CS42L43_FS_SELECT1 */ +#define CS42L43_ASP_RATE_MASK 0x00000003 +#define CS42L43_ASP_RATE_SHIFT 0 + +/* CS42L43_FS_SELECT2 */ +#define CS42L43_ASRC_DEC_OUT_RATE_MASK 0x000000C0 +#define CS42L43_ASRC_DEC_OUT_RATE_SHIFT 6 +#define CS42L43_ASRC_INT_OUT_RATE_MASK 0x00000030 +#define CS42L43_ASRC_INT_OUT_RATE_SHIFT 4 +#define CS42L43_ASRC_DEC_IN_RATE_MASK 0x0000000C +#define CS42L43_ASRC_DEC_IN_RATE_SHIFT 2 +#define CS42L43_ASRC_INT_IN_RATE_MASK 0x00000003 +#define CS42L43_ASRC_INT_IN_RATE_SHIFT 0 + +/* CS42L43_FS_SELECT3 */ +#define CS42L43_HPOUT_RATE_MASK 0x0000C000 +#define CS42L43_HPOUT_RATE_SHIFT 14 +#define CS42L43_EQZ_RATE_MASK 0x00003000 +#define CS42L43_EQZ_RATE_SHIFT 12 +#define CS42L43_DIAGGEN_RATE_MASK 0x00000C00 +#define CS42L43_DIAGGEN_RATE_SHIFT 10 +#define CS42L43_DECIM_CH4_RATE_MASK 0x00000300 +#define CS42L43_DECIM_CH4_RATE_SHIFT 8 +#define CS42L43_DECIM_CH3_RATE_MASK 0x000000C0 +#define CS42L43_DECIM_CH3_RATE_SHIFT 6 +#define CS42L43_DECIM_CH2_RATE_MASK 0x00000030 +#define CS42L43_DECIM_CH2_RATE_SHIFT 4 +#define CS42L43_DECIM_CH1_RATE_MASK 0x0000000C +#define CS42L43_DECIM_CH1_RATE_SHIFT 2 +#define CS42L43_AMP1_2_RATE_MASK 0x00000003 +#define CS42L43_AMP1_2_RATE_SHIFT 0 + +/* CS42L43_FS_SELECT4 */ +#define CS42L43_SW_DP7_RATE_MASK 0x00C00000 +#define CS42L43_SW_DP7_RATE_SHIFT 22 +#define CS42L43_SW_DP6_RATE_MASK 0x00300000 +#define CS42L43_SW_DP6_RATE_SHIFT 20 +#define CS42L43_SPDIF_RATE_MASK 0x000C0000 +#define CS42L43_SPDIF_RATE_SHIFT 18 +#define CS42L43_SW_DP5_RATE_MASK 0x00030000 +#define CS42L43_SW_DP5_RATE_SHIFT 16 +#define CS42L43_SW_DP4_RATE_MASK 0x0000C000 +#define CS42L43_SW_DP4_RATE_SHIFT 14 +#define CS42L43_SW_DP3_RATE_MASK 0x00003000 +#define CS42L43_SW_DP3_RATE_SHIFT 12 +#define CS42L43_SW_DP2_RATE_MASK 0x00000C00 +#define CS42L43_SW_DP2_RATE_SHIFT 10 +#define CS42L43_SW_DP1_RATE_MASK 0x00000300 +#define CS42L43_SW_DP1_RATE_SHIFT 8 +#define CS42L43_ISRC2_LOW_RATE_MASK 0x000000C0 +#define CS42L43_ISRC2_LOW_RATE_SHIFT 6 +#define CS42L43_ISRC2_HIGH_RATE_MASK 0x00000030 +#define CS42L43_ISRC2_HIGH_RATE_SHIFT 4 +#define CS42L43_ISRC1_LOW_RATE_MASK 0x0000000C +#define CS42L43_ISRC1_LOW_RATE_SHIFT 2 +#define CS42L43_ISRC1_HIGH_RATE_MASK 0x00000003 +#define CS42L43_ISRC1_HIGH_RATE_SHIFT 0 + +/* CS42L43_PDM_CONTROL */ +#define CS42L43_PDM2_CLK_DIV_MASK 0x0000000C +#define CS42L43_PDM2_CLK_DIV_SHIFT 2 +#define CS42L43_PDM1_CLK_DIV_MASK 0x00000003 +#define CS42L43_PDM1_CLK_DIV_SHIFT 0 + +/* CS42L43_ASP_CLK_CONFIG1 */ +#define CS42L43_ASP_BCLK_N_MASK 0x03FF0000 +#define CS42L43_ASP_BCLK_N_SHIFT 16 +#define CS42L43_ASP_BCLK_M_MASK 0x000003FF +#define CS42L43_ASP_BCLK_M_SHIFT 0 + +/* CS42L43_ASP_CLK_CONFIG2 */ +#define CS42L43_ASP_MASTER_MODE_MASK 0x00000002 +#define CS42L43_ASP_MASTER_MODE_SHIFT 1 +#define CS42L43_ASP_BCLK_INV_MASK 0x00000001 +#define CS42L43_ASP_BCLK_INV_SHIFT 0 + +/* CS42L43_OSC_DIV_SEL */ +#define CS42L43_OSC_DIV2_EN_MASK 0x00000001 +#define CS42L43_OSC_DIV2_EN_SHIFT 0 + +/* CS42L43_ADC_B_CTRL1..CS42L43_ADC_B_CTRL1 */ +#define CS42L43_PGA_WIDESWING_MODE_EN_MASK 0x00000080 +#define CS42L43_PGA_WIDESWING_MODE_EN_SHIFT 7 +#define CS42L43_ADC_AIN_SEL_MASK 0x00000010 +#define CS42L43_ADC_AIN_SEL_SHIFT 4 +#define CS42L43_ADC_PGA_GAIN_MASK 0x0000000F +#define CS42L43_ADC_PGA_GAIN_SHIFT 0 + +/* CS42L43_DECIM_HPF_WNF_CTRL1..CS42L43_DECIM_HPF_WNF_CTRL4 */ +#define CS42L43_DECIM_WNF_CF_MASK 0x00000070 +#define CS42L43_DECIM_WNF_CF_SHIFT 4 +#define CS42L43_DECIM_WNF_EN_MASK 0x00000008 +#define CS42L43_DECIM_WNF_EN_SHIFT 3 +#define CS42L43_DECIM_HPF_CF_MASK 0x00000006 +#define CS42L43_DECIM_HPF_CF_SHIFT 1 +#define CS42L43_DECIM_HPF_EN_MASK 0x00000001 +#define CS42L43_DECIM_HPF_EN_SHIFT 0 + +/* CS42L43_DMIC_PDM_CTRL */ +#define CS42L43_PDM2R_INV_MASK 0x00000020 +#define CS42L43_PDM2R_INV_SHIFT 5 +#define CS42L43_PDM2L_INV_MASK 0x00000010 +#define CS42L43_PDM2L_INV_SHIFT 4 +#define CS42L43_PDM1R_INV_MASK 0x00000008 +#define CS42L43_PDM1R_INV_SHIFT 3 +#define CS42L43_PDM1L_INV_MASK 0x00000004 +#define CS42L43_PDM1L_INV_SHIFT 2 + +/* CS42L43_DECIM_VOL_CTRL_CH1_CH2 */ +#define CS42L43_DECIM2_MUTE_MASK 0x80000000 +#define CS42L43_DECIM2_MUTE_SHIFT 31 +#define CS42L43_DECIM2_VOL_MASK 0x3FC00000 +#define CS42L43_DECIM2_VOL_SHIFT 22 +#define CS42L43_DECIM2_VD_RAMP_MASK 0x00380000 +#define CS42L43_DECIM2_VD_RAMP_SHIFT 19 +#define CS42L43_DECIM2_VI_RAMP_MASK 0x00070000 +#define CS42L43_DECIM2_VI_RAMP_SHIFT 16 +#define CS42L43_DECIM1_MUTE_MASK 0x00008000 +#define CS42L43_DECIM1_MUTE_SHIFT 15 +#define CS42L43_DECIM1_VOL_MASK 0x00003FC0 +#define CS42L43_DECIM1_VOL_SHIFT 6 +#define CS42L43_DECIM1_VD_RAMP_MASK 0x00000038 +#define CS42L43_DECIM1_VD_RAMP_SHIFT 3 +#define CS42L43_DECIM1_VI_RAMP_MASK 0x00000007 +#define CS42L43_DECIM1_VI_RAMP_SHIFT 0 + +/* CS42L43_DECIM_VOL_CTRL_CH3_CH4 */ +#define CS42L43_DECIM4_MUTE_MASK 0x80000000 +#define CS42L43_DECIM4_MUTE_SHIFT 31 +#define CS42L43_DECIM4_VOL_MASK 0x3FC00000 +#define CS42L43_DECIM4_VOL_SHIFT 22 +#define CS42L43_DECIM4_VD_RAMP_MASK 0x00380000 +#define CS42L43_DECIM4_VD_RAMP_SHIFT 19 +#define CS42L43_DECIM4_VI_RAMP_MASK 0x00070000 +#define CS42L43_DECIM4_VI_RAMP_SHIFT 16 +#define CS42L43_DECIM3_MUTE_MASK 0x00008000 +#define CS42L43_DECIM3_MUTE_SHIFT 15 +#define CS42L43_DECIM3_VOL_MASK 0x00003FC0 +#define CS42L43_DECIM3_VOL_SHIFT 6 +#define CS42L43_DECIM3_VD_RAMP_MASK 0x00000038 +#define CS42L43_DECIM3_VD_RAMP_SHIFT 3 +#define CS42L43_DECIM3_VI_RAMP_MASK 0x00000007 +#define CS42L43_DECIM3_VI_RAMP_SHIFT 0 + +/* CS42L43_DECIM_VOL_CTRL_UPDATE */ +#define CS42L43_DECIM4_VOL_UPDATE_MASK 0x00000008 +#define CS42L43_DECIM4_VOL_UPDATE_SHIFT 3 +#define CS42L43_DECIM3_VOL_UPDATE_MASK 0x00000004 +#define CS42L43_DECIM3_VOL_UPDATE_SHIFT 2 +#define CS42L43_DECIM2_VOL_UPDATE_MASK 0x00000002 +#define CS42L43_DECIM2_VOL_UPDATE_SHIFT 1 +#define CS42L43_DECIM1_VOL_UPDATE_MASK 0x00000001 +#define CS42L43_DECIM1_VOL_UPDATE_SHIFT 0 + +/* CS42L43_INTP_VOLUME_CTRL1..CS42L43_INTP_VOLUME_CTRL2 */ +#define CS42L43_AMP1_2_VU_MASK 0x00000200 +#define CS42L43_AMP1_2_VU_SHIFT 9 +#define CS42L43_AMP_MUTE_MASK 0x00000100 +#define CS42L43_AMP_MUTE_SHIFT 8 +#define CS42L43_AMP_VOL_MASK 0x000000FF +#define CS42L43_AMP_VOL_SHIFT 0 + +/* CS42L43_AMP1_2_VOL_RAMP */ +#define CS42L43_AMP1_2_VD_RAMP_MASK 0x00000070 +#define CS42L43_AMP1_2_VD_RAMP_SHIFT 4 +#define CS42L43_AMP1_2_VI_RAMP_MASK 0x00000007 +#define CS42L43_AMP1_2_VI_RAMP_SHIFT 0 + +/* CS42L43_ASP_CTRL */ +#define CS42L43_ASP_FSYNC_MODE_MASK 0x00000004 +#define CS42L43_ASP_FSYNC_MODE_SHIFT 2 +#define CS42L43_ASP_BCLK_EN_MASK 0x00000002 +#define CS42L43_ASP_BCLK_EN_SHIFT 1 +#define CS42L43_ASP_FSYNC_EN_MASK 0x00000001 +#define CS42L43_ASP_FSYNC_EN_SHIFT 0 + +/* CS42L43_ASP_FSYNC_CTRL1 */ +#define CS42L43_ASP_FSYNC_M_MASK 0x0007FFFF +#define CS42L43_ASP_FSYNC_M_SHIFT 0 + +/* CS42L43_ASP_FSYNC_CTRL3 */ +#define CS42L43_ASP_FSYNC_IN_INV_MASK 0x00000002 +#define CS42L43_ASP_FSYNC_IN_INV_SHIFT 1 +#define CS42L43_ASP_FSYNC_OUT_INV_MASK 0x00000001 +#define CS42L43_ASP_FSYNC_OUT_INV_SHIFT 0 + +/* CS42L43_ASP_FSYNC_CTRL4 */ +#define CS42L43_ASP_NUM_BCLKS_PER_FSYNC_MASK 0x00001FFE +#define CS42L43_ASP_NUM_BCLKS_PER_FSYNC_SHIFT 1 + +/* CS42L43_ASP_DATA_CTRL */ +#define CS42L43_ASP_FSYNC_FRAME_START_PHASE_MASK 0x00000008 +#define CS42L43_ASP_FSYNC_FRAME_START_PHASE_SHIFT 3 +#define CS42L43_ASP_FSYNC_FRAME_START_DLY_MASK 0x00000007 +#define CS42L43_ASP_FSYNC_FRAME_START_DLY_SHIFT 0 + +/* CS42L43_ASP_RX_EN */ +#define CS42L43_ASP_RX_CH6_EN_MASK 0x00000020 +#define CS42L43_ASP_RX_CH6_EN_SHIFT 5 +#define CS42L43_ASP_RX_CH5_EN_MASK 0x00000010 +#define CS42L43_ASP_RX_CH5_EN_SHIFT 4 +#define CS42L43_ASP_RX_CH4_EN_MASK 0x00000008 +#define CS42L43_ASP_RX_CH4_EN_SHIFT 3 +#define CS42L43_ASP_RX_CH3_EN_MASK 0x00000004 +#define CS42L43_ASP_RX_CH3_EN_SHIFT 2 +#define CS42L43_ASP_RX_CH2_EN_MASK 0x00000002 +#define CS42L43_ASP_RX_CH2_EN_SHIFT 1 +#define CS42L43_ASP_RX_CH1_EN_MASK 0x00000001 +#define CS42L43_ASP_RX_CH1_EN_SHIFT 0 + +/* CS42L43_ASP_TX_EN */ +#define CS42L43_ASP_TX_CH6_EN_MASK 0x00000020 +#define CS42L43_ASP_TX_CH6_EN_SHIFT 5 +#define CS42L43_ASP_TX_CH5_EN_MASK 0x00000010 +#define CS42L43_ASP_TX_CH5_EN_SHIFT 4 +#define CS42L43_ASP_TX_CH4_EN_MASK 0x00000008 +#define CS42L43_ASP_TX_CH4_EN_SHIFT 3 +#define CS42L43_ASP_TX_CH3_EN_MASK 0x00000004 +#define CS42L43_ASP_TX_CH3_EN_SHIFT 2 +#define CS42L43_ASP_TX_CH2_EN_MASK 0x00000002 +#define CS42L43_ASP_TX_CH2_EN_SHIFT 1 +#define CS42L43_ASP_TX_CH1_EN_MASK 0x00000001 +#define CS42L43_ASP_TX_CH1_EN_SHIFT 0 + +/* CS42L43_ASP_RX_CH1_CTRL..CS42L43_ASP_TX_CH6_CTRL */ +#define CS42L43_ASP_CH_WIDTH_MASK 0x001F0000 +#define CS42L43_ASP_CH_WIDTH_SHIFT 16 +#define CS42L43_ASP_CH_SLOT_MASK 0x00001FFE +#define CS42L43_ASP_CH_SLOT_SHIFT 1 +#define CS42L43_ASP_CH_SLOT_PHASE_MASK 0x00000001 +#define CS42L43_ASP_CH_SLOT_PHASE_SHIFT 0 + +/* CS42L43_ASPTX1_INPUT..CS42L43_AMP4MIX_INPUT4 */ +#define CS42L43_MIXER_VOL_MASK 0x00FE0000 +#define CS42L43_MIXER_VOL_SHIFT 17 +#define CS42L43_MIXER_SRC_MASK 0x000001FF +#define CS42L43_MIXER_SRC_SHIFT 0 + +/* CS42L43_ASRC_INT_ENABLES */ +#define CS42L43_ASRC_INT4_EN_MASK 0x00000008 +#define CS42L43_ASRC_INT4_EN_SHIFT 3 +#define CS42L43_ASRC_INT3_EN_MASK 0x00000004 +#define CS42L43_ASRC_INT3_EN_SHIFT 2 +#define CS42L43_ASRC_INT2_EN_MASK 0x00000002 +#define CS42L43_ASRC_INT2_EN_SHIFT 1 +#define CS42L43_ASRC_INT1_EN_MASK 0x00000001 +#define CS42L43_ASRC_INT1_EN_SHIFT 0 + +/* CS42L43_ASRC_DEC_ENABLES */ +#define CS42L43_ASRC_DEC4_EN_MASK 0x00000008 +#define CS42L43_ASRC_DEC4_EN_SHIFT 3 +#define CS42L43_ASRC_DEC3_EN_MASK 0x00000004 +#define CS42L43_ASRC_DEC3_EN_SHIFT 2 +#define CS42L43_ASRC_DEC2_EN_MASK 0x00000002 +#define CS42L43_ASRC_DEC2_EN_SHIFT 1 +#define CS42L43_ASRC_DEC1_EN_MASK 0x00000001 +#define CS42L43_ASRC_DEC1_EN_SHIFT 0 + +/* CS42L43_PDNCNTL */ +#define CS42L43_RING_SENSE_EN_MASK 0x00000002 +#define CS42L43_RING_SENSE_EN_SHIFT 1 + +/* CS42L43_RINGSENSE_DEB_CTRL */ +#define CS42L43_RINGSENSE_INV_MASK 0x00000080 +#define CS42L43_RINGSENSE_INV_SHIFT 7 +#define CS42L43_RINGSENSE_PULLUP_PDNB_MASK 0x00000040 +#define CS42L43_RINGSENSE_PULLUP_PDNB_SHIFT 6 +#define CS42L43_RINGSENSE_FALLING_DB_TIME_MASK 0x00000038 +#define CS42L43_RINGSENSE_FALLING_DB_TIME_SHIFT 3 +#define CS42L43_RINGSENSE_RISING_DB_TIME_MASK 0x00000007 +#define CS42L43_RINGSENSE_RISING_DB_TIME_SHIFT 0 + +/* CS42L43_TIPSENSE_DEB_CTRL */ +#define CS42L43_TIPSENSE_INV_MASK 0x00000080 +#define CS42L43_TIPSENSE_INV_SHIFT 7 +#define CS42L43_TIPSENSE_FALLING_DB_TIME_MASK 0x00000038 +#define CS42L43_TIPSENSE_FALLING_DB_TIME_SHIFT 3 +#define CS42L43_TIPSENSE_RISING_DB_TIME_MASK 0x00000007 +#define CS42L43_TIPSENSE_RISING_DB_TIME_SHIFT 0 + +/* CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS */ +#define CS42L43_TIPSENSE_UNPLUG_DB_STS_MASK 0x00000008 +#define CS42L43_TIPSENSE_UNPLUG_DB_STS_SHIFT 3 +#define CS42L43_TIPSENSE_PLUG_DB_STS_MASK 0x00000004 +#define CS42L43_TIPSENSE_PLUG_DB_STS_SHIFT 2 +#define CS42L43_RINGSENSE_UNPLUG_DB_STS_MASK 0x00000002 +#define CS42L43_RINGSENSE_UNPLUG_DB_STS_SHIFT 1 +#define CS42L43_RINGSENSE_PLUG_DB_STS_MASK 0x00000001 +#define CS42L43_RINGSENSE_PLUG_DB_STS_SHIFT 0 + +/* CS42L43_HS2 */ +#define CS42L43_HS_CLAMP_DISABLE_MASK 0x10000000 +#define CS42L43_HS_CLAMP_DISABLE_SHIFT 28 +#define CS42L43_HSBIAS_RAMP_MASK 0x0C000000 +#define CS42L43_HSBIAS_RAMP_SHIFT 26 +#define CS42L43_HSDET_MODE_MASK 0x00018000 +#define CS42L43_HSDET_MODE_SHIFT 15 +#define CS42L43_HSDET_MANUAL_MODE_MASK 0x00006000 +#define CS42L43_HSDET_MANUAL_MODE_SHIFT 13 +#define CS42L43_AUTO_HSDET_TIME_MASK 0x00000700 +#define CS42L43_AUTO_HSDET_TIME_SHIFT 8 +#define CS42L43_AMP3_4_GNDREF_HS3_SEL_MASK 0x00000080 +#define CS42L43_AMP3_4_GNDREF_HS3_SEL_SHIFT 7 +#define CS42L43_AMP3_4_GNDREF_HS4_SEL_MASK 0x00000040 +#define CS42L43_AMP3_4_GNDREF_HS4_SEL_SHIFT 6 +#define CS42L43_HSBIAS_GNDREF_HS3_SEL_MASK 0x00000020 +#define CS42L43_HSBIAS_GNDREF_HS3_SEL_SHIFT 5 +#define CS42L43_HSBIAS_GNDREF_HS4_SEL_MASK 0x00000010 +#define CS42L43_HSBIAS_GNDREF_HS4_SEL_SHIFT 4 +#define CS42L43_HSBIAS_OUT_HS3_SEL_MASK 0x00000008 +#define CS42L43_HSBIAS_OUT_HS3_SEL_SHIFT 3 +#define CS42L43_HSBIAS_OUT_HS4_SEL_MASK 0x00000004 +#define CS42L43_HSBIAS_OUT_HS4_SEL_SHIFT 2 +#define CS42L43_HSGND_HS3_SEL_MASK 0x00000002 +#define CS42L43_HSGND_HS3_SEL_SHIFT 1 +#define CS42L43_HSGND_HS4_SEL_MASK 0x00000001 +#define CS42L43_HSGND_HS4_SEL_SHIFT 0 + +/* CS42L43_HS_STAT */ +#define CS42L43_HSDET_TYPE_STS_MASK 0x00000007 +#define CS42L43_HSDET_TYPE_STS_SHIFT 0 + +/* CS42L43_MCU_SW_INTERRUPT */ +#define CS42L43_CONTROL_IND_MASK 0x00000004 +#define CS42L43_CONTROL_IND_SHIFT 2 +#define CS42L43_CONFIGS_IND_MASK 0x00000002 +#define CS42L43_CONFIGS_IND_SHIFT 1 +#define CS42L43_PATCH_IND_MASK 0x00000001 +#define CS42L43_PATCH_IND_SHIFT 0 + +/* CS42L43_STEREO_MIC_CTRL */ +#define CS42L43_HS2_BIAS_SENSE_EN_MASK 0x00000020 +#define CS42L43_HS2_BIAS_SENSE_EN_SHIFT 5 +#define CS42L43_HS1_BIAS_SENSE_EN_MASK 0x00000010 +#define CS42L43_HS1_BIAS_SENSE_EN_SHIFT 4 +#define CS42L43_HS2_BIAS_EN_MASK 0x00000008 +#define CS42L43_HS2_BIAS_EN_SHIFT 3 +#define CS42L43_HS1_BIAS_EN_MASK 0x00000004 +#define CS42L43_HS1_BIAS_EN_SHIFT 2 +#define CS42L43_JACK_STEREO_CONFIG_MASK 0x00000003 +#define CS42L43_JACK_STEREO_CONFIG_SHIFT 0 + +/* CS42L43_STEREO_MIC_CLAMP_CTRL */ +#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_MASK 0x00000002 +#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_SHIFT 1 +#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK 0x00000001 +#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_SHIFT 0 + +/* CS42L43_BLOCK_EN2 */ +#define CS42L43_SPI_MSTR_EN_MASK 0x00000001 +#define CS42L43_SPI_MSTR_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN3 */ +#define CS42L43_PDM2_DIN_R_EN_MASK 0x00000020 +#define CS42L43_PDM2_DIN_R_EN_SHIFT 5 +#define CS42L43_PDM2_DIN_L_EN_MASK 0x00000010 +#define CS42L43_PDM2_DIN_L_EN_SHIFT 4 +#define CS42L43_PDM1_DIN_R_EN_MASK 0x00000008 +#define CS42L43_PDM1_DIN_R_EN_SHIFT 3 +#define CS42L43_PDM1_DIN_L_EN_MASK 0x00000004 +#define CS42L43_PDM1_DIN_L_EN_SHIFT 2 +#define CS42L43_ADC2_EN_MASK 0x00000002 +#define CS42L43_ADC2_EN_SHIFT 1 +#define CS42L43_ADC1_EN_MASK 0x00000001 +#define CS42L43_ADC1_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN4 */ +#define CS42L43_ASRC_DEC_BANK_EN_MASK 0x00000002 +#define CS42L43_ASRC_DEC_BANK_EN_SHIFT 1 +#define CS42L43_ASRC_INT_BANK_EN_MASK 0x00000001 +#define CS42L43_ASRC_INT_BANK_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN5 */ +#define CS42L43_ISRC2_BANK_EN_MASK 0x00000002 +#define CS42L43_ISRC2_BANK_EN_SHIFT 1 +#define CS42L43_ISRC1_BANK_EN_MASK 0x00000001 +#define CS42L43_ISRC1_BANK_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN6 */ +#define CS42L43_MIXER_EN_MASK 0x00000001 +#define CS42L43_MIXER_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN7 */ +#define CS42L43_EQ_EN_MASK 0x00000001 +#define CS42L43_EQ_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN8 */ +#define CS42L43_HP_EN_MASK 0x00000001 +#define CS42L43_HP_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN9 */ +#define CS42L43_TONE_EN_MASK 0x00000001 +#define CS42L43_TONE_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN10 */ +#define CS42L43_AMP2_EN_MASK 0x00000002 +#define CS42L43_AMP2_EN_SHIFT 1 +#define CS42L43_AMP1_EN_MASK 0x00000001 +#define CS42L43_AMP1_EN_SHIFT 0 + +/* CS42L43_BLOCK_EN11 */ +#define CS42L43_SPDIF_EN_MASK 0x00000001 +#define CS42L43_SPDIF_EN_SHIFT 0 + +/* CS42L43_TONE_CH1_CTRL..CS42L43_TONE_CH2_CTRL */ +#define CS42L43_TONE_FREQ_MASK 0x00000070 +#define CS42L43_TONE_FREQ_SHIFT 4 +#define CS42L43_TONE_SEL_MASK 0x0000000F +#define CS42L43_TONE_SEL_SHIFT 0 + +/* CS42L43_MIC_DETECT_CONTROL_1 */ +#define CS42L43_BUTTON_DETECT_MODE_MASK 0x00000018 +#define CS42L43_BUTTON_DETECT_MODE_SHIFT 3 +#define CS42L43_HSBIAS_MODE_MASK 0x00000006 +#define CS42L43_HSBIAS_MODE_SHIFT 1 +#define CS42L43_MIC_LVL_DET_DISABLE_MASK 0x00000001 +#define CS42L43_MIC_LVL_DET_DISABLE_SHIFT 0 + +/* CS42L43_DETECT_STATUS_1 */ +#define CS42L43_HSDET_DC_STS_MASK 0x01FF0000 +#define CS42L43_HSDET_DC_STS_SHIFT 16 +#define CS42L43_JACKDET_STS_MASK 0x00000080 +#define CS42L43_JACKDET_STS_SHIFT 7 +#define CS42L43_HSBIAS_CLAMP_STS_MASK 0x00000040 +#define CS42L43_HSBIAS_CLAMP_STS_SHIFT 6 + +/* CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL */ +#define CS42L43_JACKDET_MODE_MASK 0xC0000000 +#define CS42L43_JACKDET_MODE_SHIFT 30 +#define CS42L43_JACKDET_INV_MASK 0x20000000 +#define CS42L43_JACKDET_INV_SHIFT 29 +#define CS42L43_JACKDET_DB_TIME_MASK 0x03000000 +#define CS42L43_JACKDET_DB_TIME_SHIFT 24 +#define CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK 0x00800000 +#define CS42L43_S0_AUTO_ADCMUTE_DISABLE_SHIFT 23 +#define CS42L43_HSBIAS_SENSE_EN_MASK 0x00000080 +#define CS42L43_HSBIAS_SENSE_EN_SHIFT 7 +#define CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK 0x00000040 +#define CS42L43_AUTO_HSBIAS_CLAMP_EN_SHIFT 6 +#define CS42L43_JACKDET_SENSE_EN_MASK 0x00000020 +#define CS42L43_JACKDET_SENSE_EN_SHIFT 5 +#define CS42L43_HSBIAS_SENSE_TRIP_MASK 0x00000007 +#define CS42L43_HSBIAS_SENSE_TRIP_SHIFT 0 + +/* CS42L43_MIC_DETECT_CONTROL_ANDROID */ +#define CS42L43_HSDET_LVL_COMBWIDTH_MASK 0xC0000000 +#define CS42L43_HSDET_LVL_COMBWIDTH_SHIFT 30 +#define CS42L43_HSDET_LVL2_THRESH_MASK 0x01FF0000 +#define CS42L43_HSDET_LVL2_THRESH_SHIFT 16 +#define CS42L43_HSDET_LVL1_THRESH_MASK 0x000001FF +#define CS42L43_HSDET_LVL1_THRESH_SHIFT 0 + +/* CS42L43_ISRC1_CTRL..CS42L43_ISRC2_CTRL */ +#define CS42L43_ISRC_INT2_EN_MASK 0x00000200 +#define CS42L43_ISRC_INT2_EN_SHIFT 9 +#define CS42L43_ISRC_INT1_EN_MASK 0x00000100 +#define CS42L43_ISRC_INT1_EN_SHIFT 8 +#define CS42L43_ISRC_DEC2_EN_MASK 0x00000002 +#define CS42L43_ISRC_DEC2_EN_SHIFT 1 +#define CS42L43_ISRC_DEC1_EN_MASK 0x00000001 +#define CS42L43_ISRC_DEC1_EN_SHIFT 0 + +/* CS42L43_CTRL_REG */ +#define CS42L43_PLL_MODE_BYPASS_500_MASK 0x00000004 +#define CS42L43_PLL_MODE_BYPASS_500_SHIFT 2 +#define CS42L43_PLL_MODE_BYPASS_1029_MASK 0x00000002 +#define CS42L43_PLL_MODE_BYPASS_1029_SHIFT 1 +#define CS42L43_PLL_EN_MASK 0x00000001 +#define CS42L43_PLL_EN_SHIFT 0 + +/* CS42L43_FDIV_FRAC */ +#define CS42L43_PLL_DIV_INT_MASK 0xFF000000 +#define CS42L43_PLL_DIV_INT_SHIFT 24 +#define CS42L43_PLL_DIV_FRAC_BYTE2_MASK 0x00FF0000 +#define CS42L43_PLL_DIV_FRAC_BYTE2_SHIFT 16 +#define CS42L43_PLL_DIV_FRAC_BYTE1_MASK 0x0000FF00 +#define CS42L43_PLL_DIV_FRAC_BYTE1_SHIFT 8 +#define CS42L43_PLL_DIV_FRAC_BYTE0_MASK 0x000000FF +#define CS42L43_PLL_DIV_FRAC_BYTE0_SHIFT 0 + +/* CS42L43_CAL_RATIO */ +#define CS42L43_PLL_CAL_RATIO_MASK 0x000000FF +#define CS42L43_PLL_CAL_RATIO_SHIFT 0 + +/* CS42L43_SPI_CLK_CONFIG1 */ +#define CS42L43_SCLK_DIV_MASK 0x0000000F +#define CS42L43_SCLK_DIV_SHIFT 0 + +/* CS42L43_SPI_CONFIG1 */ +#define CS42L43_SPI_SS_IDLE_DUR_MASK 0x0F000000 +#define CS42L43_SPI_SS_IDLE_DUR_SHIFT 24 +#define CS42L43_SPI_SS_DELAY_DUR_MASK 0x000F0000 +#define CS42L43_SPI_SS_DELAY_DUR_SHIFT 16 +#define CS42L43_SPI_THREE_WIRE_MASK 0x00000100 +#define CS42L43_SPI_THREE_WIRE_SHIFT 8 +#define CS42L43_SPI_DPHA_MASK 0x00000040 +#define CS42L43_SPI_DPHA_SHIFT 6 +#define CS42L43_SPI_CPHA_MASK 0x00000020 +#define CS42L43_SPI_CPHA_SHIFT 5 +#define CS42L43_SPI_CPOL_MASK 0x00000010 +#define CS42L43_SPI_CPOL_SHIFT 4 +#define CS42L43_SPI_SS_SEL_MASK 0x00000007 +#define CS42L43_SPI_SS_SEL_SHIFT 0 + +/* CS42L43_SPI_CONFIG2 */ +#define CS42L43_SPI_SS_FRC_MASK 0x00000001 +#define CS42L43_SPI_SS_FRC_SHIFT 0 + +/* CS42L43_SPI_CONFIG3 */ +#define CS42L43_SPI_WDT_ENA_MASK 0x00000001 +#define CS42L43_SPI_WDT_ENA_SHIFT 0 + +/* CS42L43_SPI_CONFIG4 */ +#define CS42L43_SPI_STALL_ENA_MASK 0x00010000 +#define CS42L43_SPI_STALL_ENA_SHIFT 16 + +/* CS42L43_SPI_STATUS1 */ +#define CS42L43_SPI_ABORT_STS_MASK 0x00000002 +#define CS42L43_SPI_ABORT_STS_SHIFT 1 +#define CS42L43_SPI_DONE_STS_MASK 0x00000001 +#define CS42L43_SPI_DONE_STS_SHIFT 0 + +/* CS42L43_SPI_STATUS2 */ +#define CS42L43_SPI_RX_DONE_STS_MASK 0x00000010 +#define CS42L43_SPI_RX_DONE_STS_SHIFT 4 +#define CS42L43_SPI_TX_DONE_STS_MASK 0x00000001 +#define CS42L43_SPI_TX_DONE_STS_SHIFT 0 + +/* CS42L43_TRAN_CONFIG1 */ +#define CS42L43_SPI_START_MASK 0x00000001 +#define CS42L43_SPI_START_SHIFT 0 + +/* CS42L43_TRAN_CONFIG2 */ +#define CS42L43_SPI_ABORT_MASK 0x00000001 +#define CS42L43_SPI_ABORT_SHIFT 0 + +/* CS42L43_TRAN_CONFIG3 */ +#define CS42L43_SPI_WORD_SIZE_MASK 0x00070000 +#define CS42L43_SPI_WORD_SIZE_SHIFT 16 +#define CS42L43_SPI_CMD_MASK 0x00000003 +#define CS42L43_SPI_CMD_SHIFT 0 + +/* CS42L43_TRAN_CONFIG4 */ +#define CS42L43_SPI_TX_LENGTH_MASK 0x0000FFFF +#define CS42L43_SPI_TX_LENGTH_SHIFT 0 + +/* CS42L43_TRAN_CONFIG5 */ +#define CS42L43_SPI_RX_LENGTH_MASK 0x0000FFFF +#define CS42L43_SPI_RX_LENGTH_SHIFT 0 + +/* CS42L43_TRAN_CONFIG6 */ +#define CS42L43_SPI_TX_BLOCK_LENGTH_MASK 0x0000000F +#define CS42L43_SPI_TX_BLOCK_LENGTH_SHIFT 0 + +/* CS42L43_TRAN_CONFIG7 */ +#define CS42L43_SPI_RX_BLOCK_LENGTH_MASK 0x0000000F +#define CS42L43_SPI_RX_BLOCK_LENGTH_SHIFT 0 + +/* CS42L43_TRAN_CONFIG8 */ +#define CS42L43_SPI_RX_DONE_MASK 0x00000010 +#define CS42L43_SPI_RX_DONE_SHIFT 4 +#define CS42L43_SPI_TX_DONE_MASK 0x00000001 +#define CS42L43_SPI_TX_DONE_SHIFT 0 + +/* CS42L43_TRAN_STATUS1 */ +#define CS42L43_SPI_BUSY_STS_MASK 0x00000100 +#define CS42L43_SPI_BUSY_STS_SHIFT 8 +#define CS42L43_SPI_RX_REQUEST_MASK 0x00000010 +#define CS42L43_SPI_RX_REQUEST_SHIFT 4 +#define CS42L43_SPI_TX_REQUEST_MASK 0x00000001 +#define CS42L43_SPI_TX_REQUEST_SHIFT 0 + +/* CS42L43_TRAN_STATUS2 */ +#define CS42L43_SPI_TX_BYTE_COUNT_MASK 0x0000FFFF +#define CS42L43_SPI_TX_BYTE_COUNT_SHIFT 0 + +/* CS42L43_TRAN_STATUS3 */ +#define CS42L43_SPI_RX_BYTE_COUNT_MASK 0x0000FFFF +#define CS42L43_SPI_RX_BYTE_COUNT_SHIFT 0 + +/* CS42L43_TX_DATA */ +#define CS42L43_SPI_TX_DATA_MASK 0xFFFFFFFF +#define CS42L43_SPI_TX_DATA_SHIFT 0 + +/* CS42L43_RX_DATA */ +#define CS42L43_SPI_RX_DATA_MASK 0xFFFFFFFF +#define CS42L43_SPI_RX_DATA_SHIFT 0 + +/* CS42L43_DACCNFG1 */ +#define CS42L43_HP_MSTR_VOL_CTRL_EN_MASK 0x00000008 +#define CS42L43_HP_MSTR_VOL_CTRL_EN_SHIFT 3 +#define CS42L43_AMP4_INV_MASK 0x00000002 +#define CS42L43_AMP4_INV_SHIFT 1 +#define CS42L43_AMP3_INV_MASK 0x00000001 +#define CS42L43_AMP3_INV_SHIFT 0 + +/* CS42L43_DACCNFG2 */ +#define CS42L43_HP_AUTO_CLAMP_DISABLE_MASK 0x00000002 +#define CS42L43_HP_AUTO_CLAMP_DISABLE_SHIFT 1 +#define CS42L43_HP_HPF_EN_MASK 0x00000001 +#define CS42L43_HP_HPF_EN_SHIFT 0 + +/* CS42L43_HPPATHVOL */ +#define CS42L43_AMP4_PATH_VOL_MASK 0x01FF0000 +#define CS42L43_AMP4_PATH_VOL_SHIFT 16 +#define CS42L43_AMP3_PATH_VOL_MASK 0x000001FF +#define CS42L43_AMP3_PATH_VOL_SHIFT 0 + +/* CS42L43_PGAVOL */ +#define CS42L43_HP_PATH_VOL_RAMP_MASK 0x0003C000 +#define CS42L43_HP_PATH_VOL_RAMP_SHIFT 14 +#define CS42L43_HP_PATH_VOL_ZC_MASK 0x00002000 +#define CS42L43_HP_PATH_VOL_ZC_SHIFT 13 +#define CS42L43_HP_PATH_VOL_SFT_MASK 0x00001000 +#define CS42L43_HP_PATH_VOL_SFT_SHIFT 12 +#define CS42L43_HP_DIG_VOL_RAMP_MASK 0x00000F00 +#define CS42L43_HP_DIG_VOL_RAMP_SHIFT 8 +#define CS42L43_HP_ANA_VOL_RAMP_MASK 0x0000000F +#define CS42L43_HP_ANA_VOL_RAMP_SHIFT 0 + +/* CS42L43_LOADDETRESULTS */ +#define CS42L43_AMP3_RES_DET_MASK 0x00000003 +#define CS42L43_AMP3_RES_DET_SHIFT 0 + +/* CS42L43_LOADDETENA */ +#define CS42L43_HPLOAD_DET_EN_MASK 0x00000001 +#define CS42L43_HPLOAD_DET_EN_SHIFT 0 + +/* CS42L43_CTRL */ +#define CS42L43_ADPTPWR_MODE_MASK 0x00000007 +#define CS42L43_ADPTPWR_MODE_SHIFT 0 + +/* CS42L43_COEFF_RD_WR0 */ +#define CS42L43_WRITE_MODE_MASK 0x00000002 +#define CS42L43_WRITE_MODE_SHIFT 1 + +/* CS42L43_INIT_DONE0 */ +#define CS42L43_INITIALIZE_DONE_MASK 0x00000001 +#define CS42L43_INITIALIZE_DONE_SHIFT 0 + +/* CS42L43_START_EQZ0 */ +#define CS42L43_START_FILTER_MASK 0x00000001 +#define CS42L43_START_FILTER_SHIFT 0 + +/* CS42L43_MUTE_EQ_IN0 */ +#define CS42L43_MUTE_EQ_CH2_MASK 0x00000002 +#define CS42L43_MUTE_EQ_CH2_SHIFT 1 +#define CS42L43_MUTE_EQ_CH1_MASK 0x00000001 +#define CS42L43_MUTE_EQ_CH1_SHIFT 0 + +/* CS42L43_PLL_INT */ +#define CS42L43_PLL_LOST_LOCK_INT_MASK 0x00000002 +#define CS42L43_PLL_LOST_LOCK_INT_SHIFT 1 +#define CS42L43_PLL_READY_INT_MASK 0x00000001 +#define CS42L43_PLL_READY_INT_SHIFT 0 + +/* CS42L43_SOFT_INT */ +#define CS42L43_CONTROL_APPLIED_INT_MASK 0x00000010 +#define CS42L43_CONTROL_APPLIED_INT_SHIFT 4 +#define CS42L43_CONTROL_WARN_INT_MASK 0x00000008 +#define CS42L43_CONTROL_WARN_INT_SHIFT 3 +#define CS42L43_PATCH_WARN_INT_MASK 0x00000002 +#define CS42L43_PATCH_WARN_INT_SHIFT 1 +#define CS42L43_PATCH_APPLIED_INT_MASK 0x00000001 +#define CS42L43_PATCH_APPLIED_INT_SHIFT 0 + +/* CS42L43_MSM_INT */ +#define CS42L43_HP_STARTUP_DONE_INT_MASK 0x00000800 +#define CS42L43_HP_STARTUP_DONE_INT_SHIFT 11 +#define CS42L43_HP_SHUTDOWN_DONE_INT_MASK 0x00000400 +#define CS42L43_HP_SHUTDOWN_DONE_INT_SHIFT 10 +#define CS42L43_HSDET_DONE_INT_MASK 0x00000200 +#define CS42L43_HSDET_DONE_INT_SHIFT 9 +#define CS42L43_TIPSENSE_UNPLUG_DB_INT_MASK 0x00000080 +#define CS42L43_TIPSENSE_UNPLUG_DB_INT_SHIFT 7 +#define CS42L43_TIPSENSE_PLUG_DB_INT_MASK 0x00000040 +#define CS42L43_TIPSENSE_PLUG_DB_INT_SHIFT 6 +#define CS42L43_RINGSENSE_UNPLUG_DB_INT_MASK 0x00000020 +#define CS42L43_RINGSENSE_UNPLUG_DB_INT_SHIFT 5 +#define CS42L43_RINGSENSE_PLUG_DB_INT_MASK 0x00000010 +#define CS42L43_RINGSENSE_PLUG_DB_INT_SHIFT 4 +#define CS42L43_TIPSENSE_UNPLUG_PDET_INT_MASK 0x00000008 +#define CS42L43_TIPSENSE_UNPLUG_PDET_INT_SHIFT 3 +#define CS42L43_TIPSENSE_PLUG_PDET_INT_MASK 0x00000004 +#define CS42L43_TIPSENSE_PLUG_PDET_INT_SHIFT 2 +#define CS42L43_RINGSENSE_UNPLUG_PDET_INT_MASK 0x00000002 +#define CS42L43_RINGSENSE_UNPLUG_PDET_INT_SHIFT 1 +#define CS42L43_RINGSENSE_PLUG_PDET_INT_MASK 0x00000001 +#define CS42L43_RINGSENSE_PLUG_PDET_INT_SHIFT 0 + +/* CS42L43_ACC_DET_INT */ +#define CS42L43_HS2_BIAS_SENSE_INT_MASK 0x00000800 +#define CS42L43_HS2_BIAS_SENSE_INT_SHIFT 11 +#define CS42L43_HS1_BIAS_SENSE_INT_MASK 0x00000400 +#define CS42L43_HS1_BIAS_SENSE_INT_SHIFT 10 +#define CS42L43_DC_DETECT1_FALSE_INT_MASK 0x00000080 +#define CS42L43_DC_DETECT1_FALSE_INT_SHIFT 7 +#define CS42L43_DC_DETECT1_TRUE_INT_MASK 0x00000040 +#define CS42L43_DC_DETECT1_TRUE_INT_SHIFT 6 +#define CS42L43_HSBIAS_CLAMPED_INT_MASK 0x00000008 +#define CS42L43_HSBIAS_CLAMPED_INT_SHIFT 3 +#define CS42L43_HS3_4_BIAS_SENSE_INT_MASK 0x00000001 +#define CS42L43_HS3_4_BIAS_SENSE_INT_SHIFT 0 + +/* CS42L43_SPI_MSTR_INT */ +#define CS42L43_IRQ_SPI_STALLING_INT_MASK 0x00000004 +#define CS42L43_IRQ_SPI_STALLING_INT_SHIFT 2 +#define CS42L43_IRQ_SPI_STS_INT_MASK 0x00000002 +#define CS42L43_IRQ_SPI_STS_INT_SHIFT 1 +#define CS42L43_IRQ_SPI_BLOCK_INT_MASK 0x00000001 +#define CS42L43_IRQ_SPI_BLOCK_INT_SHIFT 0 + +/* CS42L43_SW_TO_SPI_BRIDGE_INT */ +#define CS42L43_SW2SPI_BUF_OVF_UDF_INT_MASK 0x00000001 +#define CS42L43_SW2SPI_BUF_OVF_UDF_INT_SHIFT 0 + +/* CS42L43_CLASS_D_AMP_INT */ +#define CS42L43_AMP2_CLK_STOP_FAULT_INT_MASK 0x00002000 +#define CS42L43_AMP2_CLK_STOP_FAULT_INT_SHIFT 13 +#define CS42L43_AMP1_CLK_STOP_FAULT_INT_MASK 0x00001000 +#define CS42L43_AMP1_CLK_STOP_FAULT_INT_SHIFT 12 +#define CS42L43_AMP2_VDDSPK_FAULT_INT_MASK 0x00000800 +#define CS42L43_AMP2_VDDSPK_FAULT_INT_SHIFT 11 +#define CS42L43_AMP1_VDDSPK_FAULT_INT_MASK 0x00000400 +#define CS42L43_AMP1_VDDSPK_FAULT_INT_SHIFT 10 +#define CS42L43_AMP2_SHUTDOWN_DONE_INT_MASK 0x00000200 +#define CS42L43_AMP2_SHUTDOWN_DONE_INT_SHIFT 9 +#define CS42L43_AMP1_SHUTDOWN_DONE_INT_MASK 0x00000100 +#define CS42L43_AMP1_SHUTDOWN_DONE_INT_SHIFT 8 +#define CS42L43_AMP2_STARTUP_DONE_INT_MASK 0x00000080 +#define CS42L43_AMP2_STARTUP_DONE_INT_SHIFT 7 +#define CS42L43_AMP1_STARTUP_DONE_INT_MASK 0x00000040 +#define CS42L43_AMP1_STARTUP_DONE_INT_SHIFT 6 +#define CS42L43_AMP2_THERM_SHDN_INT_MASK 0x00000020 +#define CS42L43_AMP2_THERM_SHDN_INT_SHIFT 5 +#define CS42L43_AMP1_THERM_SHDN_INT_MASK 0x00000010 +#define CS42L43_AMP1_THERM_SHDN_INT_SHIFT 4 +#define CS42L43_AMP2_THERM_WARN_INT_MASK 0x00000008 +#define CS42L43_AMP2_THERM_WARN_INT_SHIFT 3 +#define CS42L43_AMP1_THERM_WARN_INT_MASK 0x00000004 +#define CS42L43_AMP1_THERM_WARN_INT_SHIFT 2 +#define CS42L43_AMP2_SCDET_INT_MASK 0x00000002 +#define CS42L43_AMP2_SCDET_INT_SHIFT 1 +#define CS42L43_AMP1_SCDET_INT_MASK 0x00000001 +#define CS42L43_AMP1_SCDET_INT_SHIFT 0 + +/* CS42L43_GPIO_INT */ +#define CS42L43_GPIO3_FALL_INT_MASK 0x00000020 +#define CS42L43_GPIO3_FALL_INT_SHIFT 5 +#define CS42L43_GPIO3_RISE_INT_MASK 0x00000010 +#define CS42L43_GPIO3_RISE_INT_SHIFT 4 +#define CS42L43_GPIO2_FALL_INT_MASK 0x00000008 +#define CS42L43_GPIO2_FALL_INT_SHIFT 3 +#define CS42L43_GPIO2_RISE_INT_MASK 0x00000004 +#define CS42L43_GPIO2_RISE_INT_SHIFT 2 +#define CS42L43_GPIO1_FALL_INT_MASK 0x00000002 +#define CS42L43_GPIO1_FALL_INT_SHIFT 1 +#define CS42L43_GPIO1_RISE_INT_MASK 0x00000001 +#define CS42L43_GPIO1_RISE_INT_SHIFT 0 + +/* CS42L43_HPOUT_INT */ +#define CS42L43_HP_ILIMIT_INT_MASK 0x00000002 +#define CS42L43_HP_ILIMIT_INT_SHIFT 1 +#define CS42L43_HP_LOADDET_DONE_INT_MASK 0x00000001 +#define CS42L43_HP_LOADDET_DONE_INT_SHIFT 0 + +/* CS42L43_BOOT_CONTROL */ +#define CS42L43_LOCK_HW_STS_MASK 0x00000002 +#define CS42L43_LOCK_HW_STS_SHIFT 1 + +/* CS42L43_BLOCK_EN */ +#define CS42L43_MCU_EN_MASK 0x00000001 +#define CS42L43_MCU_EN_SHIFT 0 + +/* CS42L43_SHUTTER_CONTROL */ +#define CS42L43_STATUS_SPK_SHUTTER_MUTE_MASK 0x00008000 +#define CS42L43_STATUS_SPK_SHUTTER_MUTE_SHIFT 15 +#define CS42L43_SPK_SHUTTER_CFG_MASK 0x00000F00 +#define CS42L43_SPK_SHUTTER_CFG_SHIFT 8 +#define CS42L43_STATUS_MIC_SHUTTER_MUTE_MASK 0x00000080 +#define CS42L43_STATUS_MIC_SHUTTER_MUTE_SHIFT 7 +#define CS42L43_MIC_SHUTTER_CFG_MASK 0x0000000F +#define CS42L43_MIC_SHUTTER_CFG_SHIFT 0 + +/* CS42L43_MCU_SW_REV */ +#define CS42L43_BIOS_SUBMINOR_REV_MASK 0xFF000000 +#define CS42L43_BIOS_SUBMINOR_REV_SHIFT 24 +#define CS42L43_BIOS_MINOR_REV_MASK 0x00F00000 +#define CS42L43_BIOS_MINOR_REV_SHIFT 20 +#define CS42L43_BIOS_MAJOR_REV_MASK 0x000F0000 +#define CS42L43_BIOS_MAJOR_REV_SHIFT 16 +#define CS42L43_FW_SUBMINOR_REV_MASK 0x0000FF00 +#define CS42L43_FW_SUBMINOR_REV_SHIFT 8 +#define CS42L43_FW_MINOR_REV_MASK 0x000000F0 +#define CS42L43_FW_MINOR_REV_SHIFT 4 +#define CS42L43_FW_MAJOR_REV_MASK 0x0000000F +#define CS42L43_FW_MAJOR_REV_SHIFT 0 + +/* CS42L43_NEED_CONFIGS */ +#define CS42L43_FW_PATCH_NEED_CFG_MASK 0x80000000 +#define CS42L43_FW_PATCH_NEED_CFG_SHIFT 31 + +#endif /* CS42L43_CORE_REGS_H */ diff --git a/include/linux/mfd/cs42l43.h b/include/linux/mfd/cs42l43.h new file mode 100644 index 0000000000000..1d3c132beda9f --- /dev/null +++ b/include/linux/mfd/cs42l43.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CS42L43 core driver external data + * + * Copyright (C) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/soundwire/sdw.h> +#include <linux/workqueue.h> + +#ifndef CS42L43_CORE_EXT_H +#define CS42L43_CORE_EXT_H + +#define CS42L43_N_SUPPLIES 3 + +struct cs42l43 { + struct device *dev; + struct regmap *regmap; + struct sdw_slave *sdw; + + struct regulator *vdd_p; + struct regulator *vdd_d; + struct regulator_bulk_data core_supplies[CS42L43_N_SUPPLIES]; + + struct gpio_desc *reset; + int irq; + + struct work_struct boot_work; + struct completion device_attach; + struct completion device_detach; + struct completion firmware_download; + int firmware_error; + + unsigned int sdw_freq; + // Lock to gate control of the PLL and its sources + struct mutex pll_lock; + + bool sdw_pll_active; + bool attached; + bool hw_lock; +}; + +#endif /* CS42L43_CORE_EXT_H */
+static int cs42l43_sdw_update_status(struct sdw_slave *sdw, enum sdw_slave_status status) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
- switch (status) {
- case SDW_SLAVE_ATTACHED:
dev_dbg(cs42l43->dev, "Device attach\n");sdw_write_no_pm(sdw, CS42L43_GEN_INT_MASK_1,CS42L43_INT_STAT_GEN1_MASK);cs42l43->attached = true;complete(&cs42l43->device_attach);break;- case SDW_SLAVE_UNATTACHED:
dev_dbg(cs42l43->dev, "Device detach\n");cs42l43->attached = false;reinit_completion(&cs42l43->device_attach);complete(&cs42l43->device_detach);break;- default:
break;- }
- return 0;
+}
+static int cs42l43_sdw_interrupt(struct sdw_slave *sdw,
struct sdw_slave_intr_status *status)+{
- /*
* There is only a single bit in GEN_INT_STAT_1 and it doesn't clear if* IRQs are still pending so doing a read/write here after handling the* IRQ is fine.*/- sdw_read_no_pm(sdw, CS42L43_GEN_INT_STAT_1);
- sdw_write_no_pm(sdw, CS42L43_GEN_INT_STAT_1, 1);
- return 0;
+}
not really getting the comment and code above. Where is the IRQ handled? In the 'other non-SoundWire part"?
+static void cs42l43_boot_work(struct work_struct *work) +{
- struct cs42l43 *cs42l43 = container_of(work, struct cs42l43, boot_work);
- unsigned int devid, revid, otp;
- int ret;
- dev_dbg(cs42l43->dev, "Boot work running\n");
- ret = cs42l43_wait_for_attach(cs42l43);
- if (ret)
goto err;- if (cs42l43->sdw)
cs42l43->irq = cs42l43->sdw->irq;- ret = regmap_read(cs42l43->regmap, CS42L43_DEVID, &devid);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read devid: %d\n", ret);goto err;- }
- switch (devid) {
- case 0x42a43:
break;- default:
dev_err(cs42l43->dev, "Unrecognised devid: 0x%06x\n", devid);goto err;- }
- ret = regmap_read(cs42l43->regmap, CS42L43_REVID, &revid);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read rev: %d\n", ret);goto err;- }
- ret = regmap_read(cs42l43->regmap, CS42L43_OTP_REVISION_ID, &otp);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read otp rev: %d\n", ret);goto err;- }
- dev_info(cs42l43->dev,
"devid: 0x%06x, rev: 0x%02x, otp: 0x%02x\n", devid, revid, otp);- ret = cs42l43_mcu_update(cs42l43);
- if (ret)
goto err;- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
any reason why the two pm_runtime routines are not placed last, just before the return?
- ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),NULL, 0, NULL);- if (ret) {
dev_err(cs42l43->dev, "Failed to add subdevices: %d\n", ret);goto err;- }
- dev_dbg(cs42l43->dev, "Successfully initialised\n");
- return;
+err:
- pm_runtime_put_sync(cs42l43->dev);
- cs42l43_dev_remove(cs42l43);
+}
+int cs42l43_dev_probe(struct cs42l43 *cs42l43) +{
- int i, ret;
- dev_set_drvdata(cs42l43->dev, cs42l43);
- mutex_init(&cs42l43->pll_lock);
- init_completion(&cs42l43->device_attach);
- init_completion(&cs42l43->device_detach);
- init_completion(&cs42l43->firmware_download);
- INIT_WORK(&cs42l43->boot_work, cs42l43_boot_work);
- regcache_cache_only(cs42l43->regmap, true);
- cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(cs42l43->reset)) {
ret = PTR_ERR(cs42l43->reset);dev_err(cs42l43->dev, "Failed to get reset: %d\n", ret);return ret;- }
- cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "VDD_P");
- if (IS_ERR(cs42l43->vdd_p)) {
ret = PTR_ERR(cs42l43->vdd_p);dev_err(cs42l43->dev, "Failed to get VDD_P: %d\n", ret);return ret;- }
- cs42l43->vdd_d = devm_regulator_get(cs42l43->dev, "VDD_D");
- if (IS_ERR(cs42l43->vdd_d)) {
ret = PTR_ERR(cs42l43->vdd_d);dev_err(cs42l43->dev, "Failed to get VDD_D: %d\n", ret);return ret;- }
- BUILD_BUG_ON(ARRAY_SIZE(cs42l43_core_supplies) != CS42L43_N_SUPPLIES);
- for (i = 0; i < CS42L43_N_SUPPLIES; i++)
cs42l43->core_supplies[i].supply = cs42l43_core_supplies[i];- ret = devm_regulator_bulk_get(cs42l43->dev, CS42L43_N_SUPPLIES,
cs42l43->core_supplies);- if (ret) {
dev_err(cs42l43->dev, "Failed to get core supplies: %d\n", ret);return ret;- }
- ret = cs42l43_power_up(cs42l43);
- if (ret)
return ret;- pm_runtime_set_autosuspend_delay(cs42l43->dev, 250);
- pm_runtime_use_autosuspend(cs42l43->dev);
- pm_runtime_set_active(cs42l43->dev);> + pm_runtime_get_noresume(cs42l43->dev);
you probably want a comment to explain that the get_noresume() is intentional to prevent the device from suspending before the workqueue is handled.
- pm_runtime_enable(cs42l43->dev);
- queue_work(system_long_wq, &cs42l43->boot_work);
- return 0;
+} +EXPORT_SYMBOL_NS_GPL(cs42l43_dev_probe, MFD_CS42L43);
+static int __maybe_unused cs42l43_suspend(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- int ret;
- dev_dbg(cs42l43->dev, "System suspend\n");
- /*
* Don't care about being resumed here, but we do want force_resume to* always trigger an actual resume, so that register state for the* MCU/GPIOs is returned as soon as possible after system resume*/- pm_runtime_get_noresume(dev);
- ret = pm_runtime_force_suspend(dev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret);return ret;- }
- pm_runtime_put_noidle(dev);
Is the get_noresume/put_noidle useful here? What does it do?
And it seems wrong anyways, if pm_runtime_force_suspend() fails then the usage-count is not decreased.
Surprising sequence...
- ret = cs42l43_power_down(cs42l43);
- if (ret)
return ret;- return 0;
+}
+static int __maybe_unused cs42l43_resume(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- int ret;
- dev_dbg(cs42l43->dev, "System resume\n");
- ret = cs42l43_power_up(cs42l43);
- if (ret)
return ret;- ret = pm_runtime_force_resume(dev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to force resume: %d\n", ret);return ret;- }
- return 0;
+}
+static int __maybe_unused cs42l43_runtime_suspend(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- dev_dbg(cs42l43->dev, "Runtime suspend\n");
- /*
* Whilst we don't power the chip down here, going into runtime* suspend lets the SoundWire bus power down, which means we can't* communicate with the device any more.*/- regcache_cache_only(cs42l43->regmap, true);
- return 0;
+}
+static int __maybe_unused cs42l43_runtime_resume(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- unsigned int reset_canary;
- int ret;
- dev_dbg(cs42l43->dev, "Runtime resume\n");
- ret = cs42l43_wait_for_attach(cs42l43);
is there a specific reason why the existing initialization_complete is not used?
- if (ret)
return ret;- ret = regmap_read(cs42l43->regmap, CS42L43_RELID, &reset_canary);
- if (ret) {
dev_err(cs42l43->dev, "Failed to check reset canary: %d\n", ret);goto err;- }
- if (!reset_canary) {
/** If the canary has cleared the chip has reset, re-handle the* MCU and mark the cache as dirty to indicate the chip reset.*/ret = cs42l43_mcu_update(cs42l43);if (ret)goto err;regcache_mark_dirty(cs42l43->regmap);- }
- ret = regcache_sync(cs42l43->regmap);
- if (ret) {
dev_err(cs42l43->dev, "Failed to restore register cache: %d\n", ret);goto err;- }
- return 0;
+err:
- regcache_cache_only(cs42l43->regmap, true);
- return ret;
+}
On Fri, May 12, 2023 at 09:52:21AM -0500, Pierre-Louis Bossart wrote:
+static int cs42l43_sdw_interrupt(struct sdw_slave *sdw,
struct sdw_slave_intr_status *status)+{
- /*
* There is only a single bit in GEN_INT_STAT_1 and it doesn't clear if* IRQs are still pending so doing a read/write here after handling the* IRQ is fine.*/- sdw_read_no_pm(sdw, CS42L43_GEN_INT_STAT_1);
- sdw_write_no_pm(sdw, CS42L43_GEN_INT_STAT_1, 1);
- return 0;
+}
not really getting the comment and code above. Where is the IRQ handled? In the 'other non-SoundWire part"?
Yeah in the actual IRQ handler, I will update the comment to make this more clear.
- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
any reason why the two pm_runtime routines are not placed last, just before the return?
Yeah that probably makes more sense I will update.
- ret = cs42l43_power_up(cs42l43);
- if (ret)
return ret;- pm_runtime_set_autosuspend_delay(cs42l43->dev, 250);
- pm_runtime_use_autosuspend(cs42l43->dev);
- pm_runtime_set_active(cs42l43->dev);
- pm_runtime_get_noresume(cs42l43->dev);
you probably want a comment to explain that the get_noresume() is intentional to prevent the device from suspending before the workqueue is handled.
Yeah will add one.
- /*
* Don't care about being resumed here, but we do want force_resume to* always trigger an actual resume, so that register state for the* MCU/GPIOs is returned as soon as possible after system resume*/- pm_runtime_get_noresume(dev);
- ret = pm_runtime_force_suspend(dev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret);return ret;- }
- pm_runtime_put_noidle(dev);
Is the get_noresume/put_noidle useful here? What does it do?
The hope was the comment would explain this :-) Yeah it is a slightly surprising sequence. It is about ensuring force_resume runs a runtime resume, which it will only do if the reference count is resumed when we suspend.
I will add a little more to the comment to hopefully clarify why we are doing this.
And it seems wrong anyways, if pm_runtime_force_suspend() fails then the usage-count is not decreased.
Yeah that is bug, thanks for the spot I will fix that up.
+static int __maybe_unused cs42l43_runtime_resume(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- unsigned int reset_canary;
- int ret;
- dev_dbg(cs42l43->dev, "Runtime resume\n");
- ret = cs42l43_wait_for_attach(cs42l43);
is there a specific reason why the existing initialization_complete is not used?
Not massively, the driver does a fair amount of detaching and attaching during probe (has to soft reset a few times and they cause the device to fall off the bus). It was just slightly easier to keep track of all of them keeping the code internal to the driver and once we were doing it anyway it was less code to use the same mechanism on resume.
Thanks, Charles
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides PM/system power management.
Thank you for your patch. There is something to discuss/improve.
+static const char * const cs42l43_core_supplies[] = {
- "VDD_A", "VDD_IO", "VDD_CP",
+};
+static const char * const cs42l43_parent_supplies[] = { "VDD_AMP" };
+static const struct mfd_cell cs42l43_devs[] = {
- { .name = "cs42l43-pinctrl", },
- { .name = "cs42l43-irq", },
- { .name = "cs42l43-spi", },
- {
.name = "cs42l43-codec",.parent_supplies = cs42l43_parent_supplies,.num_parent_supplies = ARRAY_SIZE(cs42l43_parent_supplies),- },
+};
+static int cs42l43_soft_reset(struct cs42l43 *cs42l43) +{
- static const struct reg_sequence reset[] = {
{ CS42L43_SFT_RESET, 0x5A000000 },- };
- unsigned long time;
- dev_dbg(cs42l43->dev, "Soft resetting\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- reinit_completion(&cs42l43->device_detach);
- /* apply cache only as the device will also fall off the soundwire bus */
- regcache_cache_only(cs42l43->regmap, true);
- regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset));
- msleep(20);
- if (cs42l43->sdw) {
time = wait_for_completion_timeout(&cs42l43->device_detach,msecs_to_jiffies(100));if (!time) {dev_err(cs42l43->dev, "Timed out waiting for device detach\n");return -ETIMEDOUT;}- }
- return -EAGAIN;
+}
+static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43) +{
- unsigned long time;
- if (!cs42l43->attached) {
time = wait_for_completion_timeout(&cs42l43->device_attach,msecs_to_jiffies(500));if (!time) {dev_err(cs42l43->dev, "Timed out waiting for device re-attach\n");return -ETIMEDOUT;}- }
- regcache_cache_only(cs42l43->regmap, false);
- // Must enable OSC_DIV before doing any SoundWire reads
- if (cs42l43->sdw)
regmap_write(cs42l43->regmap, CS42L43_OSC_DIV_SEL, 0x1);- return 0;
+}
+static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow) +{
- unsigned int need_reg = CS42L43_NEED_CONFIGS;
- unsigned int val;
- int ret;
- dev_dbg(cs42l43->dev, "Moving firmware to stage 3\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- if (shadow)
need_reg = CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS;- regmap_write(cs42l43->regmap, need_reg, 0x0);
- ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS,
val, (val == 3), 5000, 20000);- if (ret) {
dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val);return ret;- }
- return -EAGAIN;
+}
+static int cs42l43_mcu_stage_3_2(struct cs42l43 *cs42l43) +{
- dev_dbg(cs42l43->dev, "Returning firmware to stage 2\n");
- regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_NEED_CONFIGS,
CS42L43_FW_PATCH_NEED_CFG_MASK);- regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_HAVE_CONFIGS, 0x0);
- return cs42l43_soft_reset(cs42l43);
+}
+static int cs42l43_mcu_disable(struct cs42l43 *cs42l43) +{
- unsigned int val;
- int ret;
- dev_dbg(cs42l43->dev, "Disabling firmware\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_MM_MCU_CFG_REG, 0xF05AA50F);
- regmap_write(cs42l43->regmap, CS42L43_FW_CTRL_MM_CTRL_SELECTION, 0x1);
- regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_CONTROL_IND_MASK);
- regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
- ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
(val & CS42L43_CONTROL_APPLIED_INT_MASK),5000, 20000);- if (ret) {
dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val);return ret;- }
- /* Soft reset to clear any register state the firmware left behind */
- return cs42l43_soft_reset(cs42l43);
+}
+struct cs42l43_patch_header {
- __le16 version;
- __le16 size;
- u8 reserved;
- u8 secure;
- __le16 bss_size;
- __le32 apply_addr;
- __le32 checksum;
- __le32 sha;
- __le16 swrev;
- __le16 patchid;
- __le16 ipxid;
- __le16 romver;
- __le32 load_addr;
+} __packed;
Put all structs together at the top.
+static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *context) +{
- struct cs42l43 *cs42l43 = context;
- struct cs42l43_patch_header *hdr;
- unsigned int loadaddr, val;
- int ret;
- if (!firmware) {
dev_err(cs42l43->dev, "Failed to load firmware\n");cs42l43->firmware_error = -ENODEV;goto err;- }
- dev_dbg(cs42l43->dev, "Updating firmware\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- hdr = (void *)&firmware->data[0];
Aren't you dropping here const? Why? That's not recommended programming.
- loadaddr = le32_to_cpu(hdr->load_addr);
- if (le16_to_cpu(hdr->version) != 0x3) {
dev_err(cs42l43->dev, "Bad firmware file format: %d\n", hdr->version);cs42l43->firmware_error = -EINVAL;goto err_release;- }
- regmap_write(cs42l43->regmap, CS42L43_PATCH_START_ADDR, loadaddr);
- regmap_bulk_write(cs42l43->regmap, loadaddr + 0x100000,
&firmware->data[0], firmware->size / sizeof(u32));- regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_PATCH_IND_MASK);
- regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
- ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
(val & CS42L43_PATCH_APPLIED_INT_MASK),5000, 500000);- if (ret) {
dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val);cs42l43->firmware_error = ret;goto err_release;- }
+err_release:
- release_firmware(firmware);
+err:
- complete(&cs42l43->firmware_download);
+}
+static int cs42l43_mcu_update_step(struct cs42l43 *cs42l43) +{
- unsigned int mcu_rev, bios_rev, boot_status, secure_cfg;
- bool patched, shadow;
- int ret;
- // Clear any stale software interrupt bits
- regmap_read(cs42l43->regmap, CS42L43_SOFT_INT, &mcu_rev);
- ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_STATUS, &boot_status);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read boot status: %d\n", ret);return ret;- }
- ret = regmap_read(cs42l43->regmap, CS42L43_MCU_SW_REV, &mcu_rev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read firmware revision: %d\n", ret);return ret;- }
- bios_rev = ((mcu_rev & CS42L43_BIOS_MAJOR_REV_MASK) << 12) |
((mcu_rev & CS42L43_BIOS_MINOR_REV_MASK) << 4) |((mcu_rev & CS42L43_BIOS_SUBMINOR_REV_MASK) >> 8);- mcu_rev = ((mcu_rev & CS42L43_FW_MAJOR_REV_MASK) << 12) |
((mcu_rev & CS42L43_FW_MINOR_REV_MASK) << 4) |((mcu_rev & CS42L43_FW_SUBMINOR_REV_MASK) >> 8);- patched = mcu_rev >= 0x2105 || bios_rev > 0x0000;
- shadow = mcu_rev >= 0x2200;
- ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_CONTROL, &secure_cfg);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read security settings: %d\n", ret);return ret;- }
- cs42l43->hw_lock = secure_cfg & CS42L43_LOCK_HW_STS_MASK;
- if (!patched && cs42l43->hw_lock) {
dev_err(cs42l43->dev, "Unpatched secure device\n");return -EPERM;- }
- dev_dbg(cs42l43->dev, "Firmware(0x%x) in boot stage %d\n", mcu_rev, boot_status);
- switch (boot_status) {
- case 2:
if (!patched) {ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,"cs42l43.bin", cs42l43->dev,GFP_KERNEL, cs42l43,cs42l43_mcu_load_firmware);if (ret) {dev_err(cs42l43->dev, "Failed to request firmware: %d\n", ret);return ret;}wait_for_completion(&cs42l43->firmware_download);if (cs42l43->firmware_error)return cs42l43->firmware_error;return -EAGAIN;} else {return cs42l43_mcu_stage_2_3(cs42l43, shadow);}- case 3:
if (patched)return cs42l43_mcu_disable(cs42l43);elsereturn cs42l43_mcu_stage_3_2(cs42l43);- case 4:
return 0;- default:
dev_err(cs42l43->dev, "Invalid boot status: %d\n", boot_status);return -EINVAL;- }
+}
+static int cs42l43_mcu_update(struct cs42l43 *cs42l43) +{
- const int update_retries = 5;
- int i, ret;
- for (i = 0; i < update_retries; i++) {
ret = cs42l43_mcu_update_step(cs42l43);if (ret != -EAGAIN)return ret;ret = cs42l43_wait_for_attach(cs42l43);if (ret)return ret;- }
- dev_err(cs42l43->dev, "Failed retrying update\n");
- return -ETIMEDOUT;
+}
+static void cs42l43_boot_work(struct work_struct *work) +{
- struct cs42l43 *cs42l43 = container_of(work, struct cs42l43, boot_work);
- unsigned int devid, revid, otp;
- int ret;
- dev_dbg(cs42l43->dev, "Boot work running\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- ret = cs42l43_wait_for_attach(cs42l43);
- if (ret)
goto err;- if (cs42l43->sdw)
cs42l43->irq = cs42l43->sdw->irq;- ret = regmap_read(cs42l43->regmap, CS42L43_DEVID, &devid);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read devid: %d\n", ret);goto err;- }
- switch (devid) {
- case 0x42a43:
break;- default:
dev_err(cs42l43->dev, "Unrecognised devid: 0x%06x\n", devid);goto err;- }
- ret = regmap_read(cs42l43->regmap, CS42L43_REVID, &revid);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read rev: %d\n", ret);goto err;- }
- ret = regmap_read(cs42l43->regmap, CS42L43_OTP_REVISION_ID, &otp);
- if (ret) {
dev_err(cs42l43->dev, "Failed to read otp rev: %d\n", ret);goto err;- }
- dev_info(cs42l43->dev,
"devid: 0x%06x, rev: 0x%02x, otp: 0x%02x\n", devid, revid, otp);- ret = cs42l43_mcu_update(cs42l43);
- if (ret)
goto err;- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
- ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),
I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
NULL, 0, NULL);- if (ret) {
dev_err(cs42l43->dev, "Failed to add subdevices: %d\n", ret);goto err;- }
- dev_dbg(cs42l43->dev, "Successfully initialised\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- return;
+err:
- pm_runtime_put_sync(cs42l43->dev);
- cs42l43_dev_remove(cs42l43);
+}
+static int cs42l43_power_up(struct cs42l43 *cs42l43) +{
- int ret;
- ret = regulator_enable(cs42l43->vdd_p);
- if (ret) {
dev_err(cs42l43->dev, "Failed to enable VDD_P: %d\n", ret);return ret;- }
- usleep_range(50, 100); /* VDD_P must be on for 50uS before any other supply */
- gpiod_set_value_cansleep(cs42l43->reset, 1);
- ret = regulator_bulk_enable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
- if (ret) {
dev_err(cs42l43->dev, "Failed to enable core supplies: %d\n", ret);goto err_reset;- }
- ret = regulator_enable(cs42l43->vdd_d);
- if (ret) {
dev_err(cs42l43->dev, "Failed to enable VDD_D: %d\n", ret);goto err_core_supplies;- }
- usleep_range(1000, 2000);
- dev_dbg(cs42l43->dev, "Powered up\n");
- return 0;
+err_core_supplies:
- regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
+err_reset:
- gpiod_set_value_cansleep(cs42l43->reset, 0);
- regulator_disable(cs42l43->vdd_p);
- return ret;
+}
+static int cs42l43_power_down(struct cs42l43 *cs42l43) +{
- int ret;
- ret = regulator_disable(cs42l43->vdd_d);
- if (ret) {
dev_err(cs42l43->dev, "Failed to disable VDD_D: %d\n", ret);return ret;- }
- ret = regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
- if (ret) {
dev_err(cs42l43->dev, "Failed to disable core supplies: %d\n", ret);return ret;- }
- gpiod_set_value_cansleep(cs42l43->reset, 0);
- ret = regulator_disable(cs42l43->vdd_p);
- if (ret) {
dev_err(cs42l43->dev, "Failed to disable VDD_P: %d\n", ret);return ret;- }
- dev_dbg(cs42l43->dev, "Powered down\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
- return 0;
+}
+int cs42l43_dev_probe(struct cs42l43 *cs42l43) +{
- int i, ret;
- dev_set_drvdata(cs42l43->dev, cs42l43);
- mutex_init(&cs42l43->pll_lock);
- init_completion(&cs42l43->device_attach);
- init_completion(&cs42l43->device_detach);
- init_completion(&cs42l43->firmware_download);
- INIT_WORK(&cs42l43->boot_work, cs42l43_boot_work);
- regcache_cache_only(cs42l43->regmap, true);
- cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(cs42l43->reset)) {
ret = PTR_ERR(cs42l43->reset);dev_err(cs42l43->dev, "Failed to get reset: %d\n", ret);
return dev_err_probe
In other places as well
return ret;- }
- cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "VDD_P");
Why these are not part of bulk get?
- if (IS_ERR(cs42l43->vdd_p)) {
ret = PTR_ERR(cs42l43->vdd_p);dev_err(cs42l43->dev, "Failed to get VDD_P: %d\n", ret);return ret;- }
- cs42l43->vdd_d = devm_regulator_get(cs42l43->dev, "VDD_D");
- if (IS_ERR(cs42l43->vdd_d)) {
ret = PTR_ERR(cs42l43->vdd_d);dev_err(cs42l43->dev, "Failed to get VDD_D: %d\n", ret);return ret;- }
- BUILD_BUG_ON(ARRAY_SIZE(cs42l43_core_supplies) != CS42L43_N_SUPPLIES);
- for (i = 0; i < CS42L43_N_SUPPLIES; i++)
cs42l43->core_supplies[i].supply = cs42l43_core_supplies[i];- ret = devm_regulator_bulk_get(cs42l43->dev, CS42L43_N_SUPPLIES,
cs42l43->core_supplies);- if (ret) {
dev_err(cs42l43->dev, "Failed to get core supplies: %d\n", ret);return ret;- }
- ret = cs42l43_power_up(cs42l43);
- if (ret)
return ret;- pm_runtime_set_autosuspend_delay(cs42l43->dev, 250);
- pm_runtime_use_autosuspend(cs42l43->dev);
- pm_runtime_set_active(cs42l43->dev);
- pm_runtime_get_noresume(cs42l43->dev);
- pm_runtime_enable(cs42l43->dev);
- queue_work(system_long_wq, &cs42l43->boot_work);
- return 0;
+} +EXPORT_SYMBOL_NS_GPL(cs42l43_dev_probe, MFD_CS42L43);
+void cs42l43_dev_remove(struct cs42l43 *cs42l43) +{
- pm_runtime_disable(cs42l43->dev);
- cs42l43_power_down(cs42l43);
+} +EXPORT_SYMBOL_NS_GPL(cs42l43_dev_remove, MFD_CS42L43);
+static int __maybe_unused cs42l43_suspend(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- int ret;
- dev_dbg(cs42l43->dev, "System suspend\n");
Drop simple debug statements. There are other tools in kernel to do such debugging.
- /*
* Don't care about being resumed here, but we do want force_resume to* always trigger an actual resume, so that register state for the* MCU/GPIOs is returned as soon as possible after system resume*/- pm_runtime_get_noresume(dev);
- ret = pm_runtime_force_suspend(dev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret);return ret;- }
- pm_runtime_put_noidle(dev);
- ret = cs42l43_power_down(cs42l43);
- if (ret)
return ret;- return 0;
+}
+static int __maybe_unused cs42l43_resume(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- int ret;
- dev_dbg(cs42l43->dev, "System resume\n");
Ditto
- ret = cs42l43_power_up(cs42l43);
- if (ret)
return ret;- ret = pm_runtime_force_resume(dev);
- if (ret) {
dev_err(cs42l43->dev, "Failed to force resume: %d\n", ret);return ret;- }
- return 0;
+}
+static int __maybe_unused cs42l43_runtime_suspend(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- dev_dbg(cs42l43->dev, "Runtime suspend\n");
Ditto
- /*
* Whilst we don't power the chip down here, going into runtime* suspend lets the SoundWire bus power down, which means we can't* communicate with the device any more.*/- regcache_cache_only(cs42l43->regmap, true);
- return 0;
+}
+static int __maybe_unused cs42l43_runtime_resume(struct device *dev) +{
- struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
- unsigned int reset_canary;
- int ret;
- dev_dbg(cs42l43->dev, "Runtime resume\n");
Ditto
Best regards, Krzysztof
On Fri, May 12, 2023 at 05:16:42PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
+static int cs42l43_soft_reset(struct cs42l43 *cs42l43) +{
- static const struct reg_sequence reset[] = {
{ CS42L43_SFT_RESET, 0x5A000000 },- };
- unsigned long time;
- dev_dbg(cs42l43->dev, "Soft resetting\n");
Drop simple debug statements for function entry/exit. There are other tools in kernel to do such debugging.
I mean I guess I can begrudingly drop them, there sure are other tools but often just firing on debug is nice/simple/easy and they are not really marking function entry/exit as much as they are marking important events.
+struct cs42l43_patch_header {
- __le16 version;
- __le16 size;
- u8 reserved;
- u8 secure;
- __le16 bss_size;
- __le32 apply_addr;
- __le32 checksum;
- __le32 sha;
- __le16 swrev;
- __le16 patchid;
- __le16 ipxid;
- __le16 romver;
- __le32 load_addr;
+} __packed;
Put all structs together at the top.
Can do.
- hdr = (void *)&firmware->data[0];
Aren't you dropping here const? Why? That's not recommended programming.
Yeah that is fair will fix that up.
- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
- ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
Well except SoundWire is a bit of a special boy, the hardware is not necessarily available in probe, the hardware is only available at some point later when the device attaches. Doing it this way all of the attaching (and various detach/attach cycles the device needs during configuration) are over by the time the child drivers bind, so they don't all need special code to handle that.
- cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(cs42l43->reset)) {
ret = PTR_ERR(cs42l43->reset);dev_err(cs42l43->dev, "Failed to get reset: %d\n", ret);return dev_err_probe
Yeah will put those in.
- cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "VDD_P");
Why these are not part of bulk get?
The comment right above explains this, VDD_P needs to be on for at least 50uS before any other supply.
Thanks, Charles
- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
- ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
Well except SoundWire is a bit of a special boy, the hardware is not necessarily available in probe, the hardware is only available at some point later when the device attaches. Doing it this way all of the attaching (and various detach/attach cycles the device needs during configuration) are over by the time the child drivers bind, so they don't all need special code to handle that.
if the devices are added in the probe, then the regmap needs to be moved to cache-only and another special API would be needed to tell the MFD framework to turn the regmap cache-only off.
But if it's the same regmap, the regmap cache is handled in the SoundWire update_status callback so maybe Krzysztof's proposal does work?
On 18/05/2023 16:16, Pierre-Louis Bossart wrote:
- ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
ARRAY_SIZE(cs42l43_reva_patch));- if (ret) {
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);goto err;- }
- pm_runtime_mark_last_busy(cs42l43->dev);
- pm_runtime_put_autosuspend(cs42l43->dev);
- ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
Well except SoundWire is a bit of a special boy, the hardware is not necessarily available in probe, the hardware is only available at some point later when the device attaches. Doing it this way all of the attaching (and various detach/attach cycles the device needs during configuration) are over by the time the child drivers bind, so they don't all need special code to handle that.
if the devices are added in the probe, then the regmap needs to be moved to cache-only and another special API would be needed to tell the MFD framework to turn the regmap cache-only off.
But if it's the same regmap, the regmap cache is handled in the SoundWire update_status callback so maybe Krzysztof's proposal does work?
But you still can't access the hardware in probe(). So you'd have all the child drivers probing but not able to talk to the hardware. The child drivers would have to hook into the update_status() somehow so they know when the peripheral has enumerated. It's simpler to add them after the hardware has enumerated - they will be able to access the hardware in their probe().
On 5/18/23 11:15, Richard Fitzgerald wrote:
On 18/05/2023 16:16, Pierre-Louis Bossart wrote:
+Ā Ā Ā ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch, +Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā ARRAY_SIZE(cs42l43_reva_patch)); +Ā Ā Ā if (ret) { +Ā Ā Ā Ā Ā Ā Ā dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret); +Ā Ā Ā Ā Ā Ā Ā goto err; +Ā Ā Ā }
+Ā Ā Ā pm_runtime_mark_last_busy(cs42l43->dev); +Ā Ā Ā pm_runtime_put_autosuspend(cs42l43->dev);
+Ā Ā Ā ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE, +Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā cs42l43_devs, ARRAY_SIZE(cs42l43_devs),
I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
Well except SoundWire is a bit of a special boy, the hardware is not necessarily available in probe, the hardware is only available at some point later when the device attaches. Doing it this way all of the attaching (and various detach/attach cycles the device needs during configuration) are over by the time the child drivers bind, so they don't all need special code to handle that.
if the devices are added in the probe, then the regmap needs to be moved to cache-only and another special API would be needed to tell the MFD framework to turn the regmap cache-only off.
But if it's the same regmap, the regmap cache is handled in the SoundWire update_status callback so maybeĀ Krzysztof's proposal does work?
But you still can't access the hardware in probe(). So you'd have all the child drivers probing but not able to talk to the hardware. The child drivers would have to hook into the update_status() somehow so they know when the peripheral has enumerated. It's simpler to add them after the hardware has enumerated - they will be able to access the hardware in their probe().
It depends on what you mean by 'access the hardware'. If the only interface is regmap and regmap is in cache-only, then the child drivers could "access the hardware" without anything happening until after regmap is no longer cache-only.
But yeah, I realize it's a long shot.
On Thu, May 18, 2023 at 11:47:12AM -0500, Pierre-Louis Bossart wrote:
On 5/18/23 11:15, Richard Fitzgerald wrote:
On 18/05/2023 16:16, Pierre-Louis Bossart wrote:
+Ā Ā Ā ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE, +Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā cs42l43_devs, ARRAY_SIZE(cs42l43_devs),
I don't why adding devices is not in probe. They use the same regmap right? So there will be no problem in probing them from MFD probe.
Well except SoundWire is a bit of a special boy, the hardware is not necessarily available in probe, the hardware is only available at some point later when the device attaches. Doing it this way all of the attaching (and various detach/attach cycles the device needs during configuration) are over by the time the child drivers bind, so they don't all need special code to handle that.
if the devices are added in the probe, then the regmap needs to be moved to cache-only and another special API would be needed to tell the MFD framework to turn the regmap cache-only off.
But if it's the same regmap, the regmap cache is handled in the SoundWire update_status callback so maybeĀ Krzysztof's proposal does work?
But you still can't access the hardware in probe(). So you'd have all the child drivers probing but not able to talk to the hardware. The child drivers would have to hook into the update_status() somehow so they know when the peripheral has enumerated. It's simpler to add them after the hardware has enumerated - they will be able to access the hardware in their probe().
It depends on what you mean by 'access the hardware'. If the only interface is regmap and regmap is in cache-only, then the child drivers could "access the hardware" without anything happening until after regmap is no longer cache-only.
But yeah, I realize it's a long shot.
Yeah, its never just the regmap. Take the sound driver for example, when the sound driver binds all the components will be inplace and a soundcard will be created. This means the user could then start an audio stream before any hardware is actually available, various bits of the audio bring up rely on timing or reading state so won't work in cache-only. Yeah you could add work arounds for these problems as they arise, but you will end up with a lot of them.
I would flip this around and ask, what is the problem with adding the child devices once the device has completed initialisation? As far as I can see it looks like a choice between moving one function call with no obvious downside, against loads lines of various work arounds in each of the child drivers for whatever subsystem specific problems are caused by the device not actually being available.
Thanks, Charles
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- MAINTAINERS | 2 + drivers/irqchip/Kconfig | 9 ++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-cs42l43.c | 170 ++++++++++++++++++++++++++++++++ include/linux/irqchip/cs42l43.h | 61 ++++++++++++ 5 files changed, 243 insertions(+) create mode 100644 drivers/irqchip/irq-cs42l43.c create mode 100644 include/linux/irqchip/cs42l43.h
diff --git a/MAINTAINERS b/MAINTAINERS index 8d2076941ff36..13945ee6cdcfe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4928,8 +4928,10 @@ L: patches@opensource.cirrus.com S: Maintained F: Documentation/devicetree/bindings/mfd/cirrus,cs* F: Documentation/devicetree/bindings/sound/cirrus,cs* +F: drivers/irqchip/irq-cs42l43* F: drivers/mfd/cs42l43* F: include/dt-bindings/sound/cs* +F: include/linux/irqchip/cs42l43* F: include/linux/mfd/cs42l43* F: include/sound/cs* F: sound/pci/hda/cs* diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 09e422da482ff..05f58015749e3 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -138,6 +138,15 @@ config BRCMSTB_L2_IRQ select GENERIC_IRQ_CHIP select IRQ_DOMAIN
+config IRQ_CS42L43 + tristate "Cirrus Logic CS42L43 IRQ Controller" + depends on MFD_CS42L43 + select REGMAP_IRQ + help + Select this to support the IRQ functions of the Cirrus Logic + CS42L43 PC CODEC, note the IRQs are required for most other + functions of the device. + config DAVINCI_CP_INTC bool select GENERIC_IRQ_CHIP diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index ffd945fe71aa2..d00330c1b0b95 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_BCM6345_L1_IRQ) += irq-bcm6345-l1.o obj-$(CONFIG_BCM7038_L1_IRQ) += irq-bcm7038-l1.o obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o +obj-$(CONFIG_IRQ_CS42L43) += irq-cs42l43.o obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o irq-mtk-cirq.o diff --git a/drivers/irqchip/irq-cs42l43.c b/drivers/irqchip/irq-cs42l43.c new file mode 100644 index 0000000000000..fc55cbdc08647 --- /dev/null +++ b/drivers/irqchip/irq-cs42l43.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 IRQ driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqchip/cs42l43.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#define CS42L43_IRQ_OFFSET(reg) ((CS42L43_##reg##_INT) - CS42L43_DECIM_INT) + +#define CS42L43_IRQ_REG(name, reg) REGMAP_IRQ_REG(CS42L43_##name, \ + CS42L43_IRQ_OFFSET(reg), \ + CS42L43_##name##_INT_MASK) + +static const struct regmap_irq cs42l43_regmap_irqs[] = { + CS42L43_IRQ_REG(PLL_LOST_LOCK, PLL), + CS42L43_IRQ_REG(PLL_READY, PLL), + + CS42L43_IRQ_REG(HP_STARTUP_DONE, MSM), + CS42L43_IRQ_REG(HP_SHUTDOWN_DONE, MSM), + CS42L43_IRQ_REG(HSDET_DONE, MSM), + CS42L43_IRQ_REG(TIPSENSE_UNPLUG_DB, MSM), + CS42L43_IRQ_REG(TIPSENSE_PLUG_DB, MSM), + CS42L43_IRQ_REG(RINGSENSE_UNPLUG_DB, MSM), + CS42L43_IRQ_REG(RINGSENSE_PLUG_DB, MSM), + CS42L43_IRQ_REG(TIPSENSE_UNPLUG_PDET, MSM), + CS42L43_IRQ_REG(TIPSENSE_PLUG_PDET, MSM), + CS42L43_IRQ_REG(RINGSENSE_UNPLUG_PDET, MSM), + CS42L43_IRQ_REG(RINGSENSE_PLUG_PDET, MSM), + + CS42L43_IRQ_REG(HS2_BIAS_SENSE, ACC_DET), + CS42L43_IRQ_REG(HS1_BIAS_SENSE, ACC_DET), + CS42L43_IRQ_REG(DC_DETECT1_FALSE, ACC_DET), + CS42L43_IRQ_REG(DC_DETECT1_TRUE, ACC_DET), + CS42L43_IRQ_REG(HSBIAS_CLAMPED, ACC_DET), + CS42L43_IRQ_REG(HS3_4_BIAS_SENSE, ACC_DET), + + CS42L43_IRQ_REG(AMP2_CLK_STOP_FAULT, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_CLK_STOP_FAULT, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_VDDSPK_FAULT, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_VDDSPK_FAULT, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_SHUTDOWN_DONE, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_SHUTDOWN_DONE, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_STARTUP_DONE, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_STARTUP_DONE, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_THERM_SHDN, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_THERM_SHDN, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_THERM_WARN, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_THERM_WARN, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP2_SCDET, CLASS_D_AMP), + CS42L43_IRQ_REG(AMP1_SCDET, CLASS_D_AMP), + + CS42L43_IRQ_REG(GPIO3_FALL, GPIO), + CS42L43_IRQ_REG(GPIO3_RISE, GPIO), + CS42L43_IRQ_REG(GPIO2_FALL, GPIO), + CS42L43_IRQ_REG(GPIO2_RISE, GPIO), + CS42L43_IRQ_REG(GPIO1_FALL, GPIO), + CS42L43_IRQ_REG(GPIO1_RISE, GPIO), + + CS42L43_IRQ_REG(HP_ILIMIT, HPOUT), + CS42L43_IRQ_REG(HP_LOADDET_DONE, HPOUT), +}; + +static const struct regmap_irq_chip cs42l43_irq_chip = { + .name = "cs42l43", + + .status_base = CS42L43_DECIM_INT, + .mask_base = CS42L43_DECIM_MASK, + .num_regs = 16, + + .irqs = cs42l43_regmap_irqs, + .num_irqs = ARRAY_SIZE(cs42l43_regmap_irqs), + + .runtime_pm = true, +}; + +struct cs42l43_irq { + struct device *dev; + + struct regmap_irq_chip irq_chip; + struct regmap_irq_chip_data *irq_data; +}; + +static int cs42l43_irq_probe(struct platform_device *pdev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); + struct cs42l43_irq *priv; + struct irq_data *irq_data; + unsigned long irq_flags; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + priv->irq_chip = cs42l43_irq_chip; + priv->irq_chip.irq_drv_data = priv; + + irq_data = irq_get_irq_data(cs42l43->irq); + if (!irq_data) { + dev_err(priv->dev, "Invalid IRQ: %d\n", cs42l43->irq); + return -EINVAL; + } + + irq_flags = irqd_get_trigger_type(irq_data); + switch (irq_flags) { + case IRQF_TRIGGER_LOW: + case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: + case IRQF_TRIGGER_FALLING: + break; + case IRQ_TYPE_NONE: + default: + irq_flags = IRQF_TRIGGER_LOW; + break; + } + + irq_flags |= IRQF_ONESHOT; + + pm_runtime_enable(priv->dev); + pm_runtime_idle(priv->dev); + + ret = devm_regmap_add_irq_chip(priv->dev, cs42l43->regmap, + cs42l43->irq, irq_flags, 0, + &priv->irq_chip, &priv->irq_data); + if (ret) { + dev_err(priv->dev, "Failed to add IRQ chip: %d\n", ret); + pm_runtime_disable(priv->dev); + return ret; + } + + dev_dbg(priv->dev, "Configured IRQ %d with flags 0x%lx\n", + cs42l43->irq, irq_flags); + + return 0; +} + +static int cs42l43_irq_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct platform_driver cs42l43_irq_driver = { + .driver = { + .name = "cs42l43-irq", + }, + + .probe = cs42l43_irq_probe, + .remove = cs42l43_irq_remove, +}; +module_platform_driver(cs42l43_irq_driver); + +MODULE_DESCRIPTION("CS42L43 IRQ Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-irq"); diff --git a/include/linux/irqchip/cs42l43.h b/include/linux/irqchip/cs42l43.h new file mode 100644 index 0000000000000..99ce0dbc96a77 --- /dev/null +++ b/include/linux/irqchip/cs42l43.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CS42L43 IRQ driver external data + * + * Copyright (C) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#ifndef CS42L43_IRQ_EXT_H +#define CS42L43_IRQ_EXT_H + +enum cs42l43_irq_numbers { + CS42L43_PLL_LOST_LOCK, + CS42L43_PLL_READY, + + CS42L43_HP_STARTUP_DONE, + CS42L43_HP_SHUTDOWN_DONE, + CS42L43_HSDET_DONE, + CS42L43_TIPSENSE_UNPLUG_DB, + CS42L43_TIPSENSE_PLUG_DB, + CS42L43_RINGSENSE_UNPLUG_DB, + CS42L43_RINGSENSE_PLUG_DB, + CS42L43_TIPSENSE_UNPLUG_PDET, + CS42L43_TIPSENSE_PLUG_PDET, + CS42L43_RINGSENSE_UNPLUG_PDET, + CS42L43_RINGSENSE_PLUG_PDET, + + CS42L43_HS2_BIAS_SENSE, + CS42L43_HS1_BIAS_SENSE, + CS42L43_DC_DETECT1_FALSE, + CS42L43_DC_DETECT1_TRUE, + CS42L43_HSBIAS_CLAMPED, + CS42L43_HS3_4_BIAS_SENSE, + + CS42L43_AMP2_CLK_STOP_FAULT, + CS42L43_AMP1_CLK_STOP_FAULT, + CS42L43_AMP2_VDDSPK_FAULT, + CS42L43_AMP1_VDDSPK_FAULT, + CS42L43_AMP2_SHUTDOWN_DONE, + CS42L43_AMP1_SHUTDOWN_DONE, + CS42L43_AMP2_STARTUP_DONE, + CS42L43_AMP1_STARTUP_DONE, + CS42L43_AMP2_THERM_SHDN, + CS42L43_AMP1_THERM_SHDN, + CS42L43_AMP2_THERM_WARN, + CS42L43_AMP1_THERM_WARN, + CS42L43_AMP2_SCDET, + CS42L43_AMP1_SCDET, + + CS42L43_GPIO3_FALL, + CS42L43_GPIO3_RISE, + CS42L43_GPIO2_FALL, + CS42L43_GPIO2_RISE, + CS42L43_GPIO1_FALL, + CS42L43_GPIO1_RISE, + + CS42L43_HP_ILIMIT, + CS42L43_HP_LOADDET_DONE, +}; + +#endif /* CS42L43_IRQ_EXT_H */
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
This is just a another variant of the board-file theme, which has nothing to do with the irqchip subsystem.
M.
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
Apologies but I really need a little help clarifying the issues here. I am totally happy to fix things up but might need a couple pointers.
1) uses the irqchip API / uses irq domains
The driver does use both the irqchip API and domains, what part of the IRQ API are we not using that we should be?
The driver registers an irq domain using irq_domain_create_linear. It requests its parent IRQ using request_threaded_irq. It passes IRQs onto the devices requesting IRQs from it using handle_nested_irq and irq_find_mapping.
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
2) driver is firmware-driven (DT or ACPI, pick your poison)
The irq chip has representation in firmware, in fact we have tested this on both ACPI and DT. Other devices can request IRQs from it through firmware, same as they can for any other IRQ chip.
Is the objection here the table mapping the register fields that are provided as an IRQ on the device?
Thanks kindly for your review and help, Charles
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
Apologies but I really need a little help clarifying the issues here. I am totally happy to fix things up but might need a couple pointers.
- uses the irqchip API / uses irq domains
The driver does use both the irqchip API and domains, what part of the IRQ API are we not using that we should be?
The driver registers an irq domain using irq_domain_create_linear. It requests its parent IRQ using request_threaded_irq. It passes IRQs onto the devices requesting IRQs from it using handle_nested_irq and irq_find_mapping.
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
That's one of the reasons. Look at the existing irqchip drivers: they have nothing in common with yours. The regmap irqchip abstraction may be convenient for what you are doing, but the result isn't really an irqchip driver. It is something that is a small bit of a larger device and not an interrupt controller driver on its own. The irqchip subsystem is there for "first class" interrupt controllers.
- driver is firmware-driven (DT or ACPI, pick your poison)
The irq chip has representation in firmware, in fact we have tested this on both ACPI and DT. Other devices can request IRQs from it through firmware, same as they can for any other IRQ chip.
That's not what I'm talking about.
Is the objection here the table mapping the register fields that are provided as an IRQ on the device?
I'm referring to this sort of construct:
+ CS42L43_IRQ_REG(HP_STARTUP_DONE, MSM), + CS42L43_IRQ_REG(HP_SHUTDOWN_DONE, MSM), + CS42L43_IRQ_REG(HSDET_DONE, MSM), + CS42L43_IRQ_REG(TIPSENSE_UNPLUG_DB, MSM), + CS42L43_IRQ_REG(TIPSENSE_PLUG_DB, MSM), + CS42L43_IRQ_REG(RINGSENSE_UNPLUG_DB, MSM), + CS42L43_IRQ_REG(RINGSENSE_PLUG_DB, MSM), + CS42L43_IRQ_REG(TIPSENSE_UNPLUG_PDET, MSM), + CS42L43_IRQ_REG(TIPSENSE_PLUG_PDET, MSM), + CS42L43_IRQ_REG(RINGSENSE_UNPLUG_PDET, MSM), + CS42L43_IRQ_REG(RINGSENSE_PLUG_PDET, MSM),
Why isn't this described in firmware tables? Why doesn't it need to be carried as part of the driver? Is "CLASS_D_AMP" something an interrupt controller driver should care about?
M.
On Fri, May 12, 2023 at 05:07:45PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
That's one of the reasons. Look at the existing irqchip drivers: they have nothing in common with yours. The regmap irqchip abstraction may be convenient for what you are doing, but the result isn't really an irqchip driver. It is something that is a small bit of a larger device and not an interrupt controller driver on its own. The irqchip subsystem is there for "first class" interrupt controllers.
Thank you this is helpful. This device has GPIOs that other devices might want to use for IRQs, so the chip is capable of providing IRQ services to other devices in the system not just itself. This is commonly used where external boosted amps have their IRQs hooked up to the CODEC.
I guess if Mark doesn't mind I think the only internal bit of the device that uses the IRQs is the CODEC driver so I could move the IRQ handling in there, it does seem a little odd to me, but I guess I don't have any problems with it.
Is the objection here the table mapping the register fields that are provided as an IRQ on the device?
I'm referring to this sort of construct:
- CS42L43_IRQ_REG(HP_STARTUP_DONE, MSM),
- CS42L43_IRQ_REG(HP_SHUTDOWN_DONE, MSM),
- CS42L43_IRQ_REG(HSDET_DONE, MSM),
- CS42L43_IRQ_REG(TIPSENSE_UNPLUG_DB, MSM),
- CS42L43_IRQ_REG(TIPSENSE_PLUG_DB, MSM),
- CS42L43_IRQ_REG(RINGSENSE_UNPLUG_DB, MSM),
- CS42L43_IRQ_REG(RINGSENSE_PLUG_DB, MSM),
- CS42L43_IRQ_REG(TIPSENSE_UNPLUG_PDET, MSM),
- CS42L43_IRQ_REG(TIPSENSE_PLUG_PDET, MSM),
- CS42L43_IRQ_REG(RINGSENSE_UNPLUG_PDET, MSM),
- CS42L43_IRQ_REG(RINGSENSE_PLUG_PDET, MSM),
Why isn't this described in firmware tables?
So we probably could do that for device tree systems, but getting this into ACPI I think will be exceedingly difficult, and that is likely the primary market for the device.
Why doesn't it need to be carried as part of the driver? Is "CLASS_D_AMP" something an interrupt controller driver should care about?
Ah ok so I think I am starting to understand, if I might paraphrase, your main objection here is that many of the IRQs are fixed purpose signals originating inside the chip itself, rather than external lines that can be hooked up for generic purposes.
I guess most "first class" IRQ controllers have a lot more generic IRQs than they do fixed purpose ones. Where as we only have the 3 GPIOs as generic purpose IRQ lines.
Thanks, Charles
On Fri, May 12, 2023 at 04:42:33PM +0000, Charles Keepax wrote:
I guess if Mark doesn't mind I think the only internal bit of the device that uses the IRQs is the CODEC driver so I could move the IRQ handling in there, it does seem a little odd to me, but I guess I don't have any problems with it.
The obvious (and previously standard) place for it would be the MFD.
On Mon, May 15, 2023 at 10:08:41AM +0900, Mark Brown wrote:
On Fri, May 12, 2023 at 04:42:33PM +0000, Charles Keepax wrote:
I guess if Mark doesn't mind I think the only internal bit of the device that uses the IRQs is the CODEC driver so I could move the IRQ handling in there, it does seem a little odd to me, but I guess I don't have any problems with it.
The obvious (and previously standard) place for it would be the MFD.
Alright I certainly have no objection to moving it there, although would be good to get Lee's thoughts, make sure he is happy with that too.
Thanks, Charles
On Mon, 15 May 2023, Charles Keepax wrote:
On Mon, May 15, 2023 at 10:08:41AM +0900, Mark Brown wrote:
On Fri, May 12, 2023 at 04:42:33PM +0000, Charles Keepax wrote:
I guess if Mark doesn't mind I think the only internal bit of the device that uses the IRQs is the CODEC driver so I could move the IRQ handling in there, it does seem a little odd to me, but I guess I don't have any problems with it.
The obvious (and previously standard) place for it would be the MFD.
Alright I certainly have no objection to moving it there, although would be good to get Lee's thoughts, make sure he is happy with that too.
Submit a patch and we'll take it from there.
On Fri, 12 May 2023, Marc Zyngier wrote:
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
Apologies but I really need a little help clarifying the issues here. I am totally happy to fix things up but might need a couple pointers.
- uses the irqchip API / uses irq domains
The driver does use both the irqchip API and domains, what part of the IRQ API are we not using that we should be?
The driver registers an irq domain using irq_domain_create_linear. It requests its parent IRQ using request_threaded_irq. It passes IRQs onto the devices requesting IRQs from it using handle_nested_irq and irq_find_mapping.
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
That's one of the reasons. Look at the existing irqchip drivers: they have nothing in common with yours. The regmap irqchip abstraction may be convenient for what you are doing, but the result isn't really an irqchip driver. It is something that is a small bit of a larger device and not an interrupt controller driver on its own. The irqchip subsystem is there for "first class" interrupt controllers.
I'm not aware of another subsystem that deals with !IRQChip level IRQ controllers. Where do simple or "second class" interrupt controllers go?
On Mon, 15 May 2023 12:25:54 +0100, Lee Jones lee@kernel.org wrote:
On Fri, 12 May 2023, Marc Zyngier wrote:
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
Apologies but I really need a little help clarifying the issues here. I am totally happy to fix things up but might need a couple pointers.
- uses the irqchip API / uses irq domains
The driver does use both the irqchip API and domains, what part of the IRQ API are we not using that we should be?
The driver registers an irq domain using irq_domain_create_linear. It requests its parent IRQ using request_threaded_irq. It passes IRQs onto the devices requesting IRQs from it using handle_nested_irq and irq_find_mapping.
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
That's one of the reasons. Look at the existing irqchip drivers: they have nothing in common with yours. The regmap irqchip abstraction may be convenient for what you are doing, but the result isn't really an irqchip driver. It is something that is a small bit of a larger device and not an interrupt controller driver on its own. The irqchip subsystem is there for "first class" interrupt controllers.
I'm not aware of another subsystem that deals with !IRQChip level IRQ controllers. Where do simple or "second class" interrupt controllers go?
This isn't an interrupt controller. This is internal signalling, local to a single component that has been artificially broken into discrete bits, including an interrupt controller. The only *real* interrupts here are the GPIOs.
I'm happy to see an interrupt controller for the GPIOs. But the rest is just internal muck that doesn't really belong here. Where should it go? Together with the rest of the stuff that manages the block as a whole. Which looks like the MFD subsystem to me.
Thanks,
M.
On Tue, 16 May 2023, Marc Zyngier wrote:
On Mon, 15 May 2023 12:25:54 +0100, Lee Jones lee@kernel.org wrote:
On Fri, 12 May 2023, Marc Zyngier wrote:
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 04:10:05PM +0100, Marc Zyngier wrote:
On Fri, 12 May 2023 13:28:35 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Sorry, but this isn't much of an interrupt controller driver. A modern interrupt controller driver is firmware-driven (DT or ACPI, pick your poison), uses irq domains, and uses the irqchip API.
Apologies but I really need a little help clarifying the issues here. I am totally happy to fix things up but might need a couple pointers.
- uses the irqchip API / uses irq domains
The driver does use both the irqchip API and domains, what part of the IRQ API are we not using that we should be?
The driver registers an irq domain using irq_domain_create_linear. It requests its parent IRQ using request_threaded_irq. It passes IRQs onto the devices requesting IRQs from it using handle_nested_irq and irq_find_mapping.
Is the objection here that regmap is making these calls for us, rather than them being hard coded into this driver?
That's one of the reasons. Look at the existing irqchip drivers: they have nothing in common with yours. The regmap irqchip abstraction may be convenient for what you are doing, but the result isn't really an irqchip driver. It is something that is a small bit of a larger device and not an interrupt controller driver on its own. The irqchip subsystem is there for "first class" interrupt controllers.
I'm not aware of another subsystem that deals with !IRQChip level IRQ controllers. Where do simple or "second class" interrupt controllers go?
This isn't an interrupt controller. This is internal signalling, local to a single component that has been artificially broken into discrete bits, including an interrupt controller. The only *real* interrupts here are the GPIOs.
I'm happy to see an interrupt controller for the GPIOs. But the rest is just internal muck that doesn't really belong here. Where should it
You should have been a poet! =;-)
go? Together with the rest of the stuff that manages the block as a whole. Which looks like the MFD subsystem to me.
Very well. Let's see this "muck" in a patch please!
On Tue, 16 May 2023 11:09:36 +0100, Lee Jones lee@kernel.org wrote:
On Tue, 16 May 2023, Marc Zyngier wrote:
I'm happy to see an interrupt controller for the GPIOs. But the rest is just internal muck that doesn't really belong here. Where should it
You should have been a poet! =;-)
Who says I'm not?
M.
On Tue, May 16, 2023 at 11:09:36AM +0100, Lee Jones wrote:
On Tue, 16 May 2023, Marc Zyngier wrote:
On Mon, 15 May 2023 12:25:54 +0100, Lee Jones lee@kernel.org wrote:
On Fri, 12 May 2023, Marc Zyngier wrote:
On Fri, 12 May 2023 16:39:33 +0100, Charles Keepax ckeepax@opensource.cirrus.com wrote:
I'm not aware of another subsystem that deals with !IRQChip level IRQ controllers. Where do simple or "second class" interrupt controllers go?
This isn't an interrupt controller. This is internal signalling, local to a single component that has been artificially broken into discrete bits, including an interrupt controller. The only *real* interrupts here are the GPIOs.
I would question this statement a little, they are fixed function IRQs sure but they are still real interrupts. These are lines which receive a signal and on an edge they set a stick status bit, which causes another signal to generate an edge, they have registers which let you mask events, if it walks like a duck and all. The only difference between this and a "real" interrupt is whether the chip designer or the board designer was the person who decided where the wire was connected.
I'm happy to see an interrupt controller for the GPIOs. But the rest is just internal muck that doesn't really belong here. Where should it
Internal-ish, granted many of them are primarily useful to the device itself. But it is very easy to construct situations where say knowing the speaker thermals are high, or that a jack has been inserted are useful outside of the CODEC driver itself.
go? Together with the rest of the stuff that manages the block as a whole. Which looks like the MFD subsystem to me.
Very well. Let's see this "muck" in a patch please!
Groovy I will do a re-spin moving the IRQ stuff to the MFD and lets see where we get to.
Thank you all for your help in reviewing this so far.
Thanks, Charles
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The IRQ chip provides IRQ functionality both to other parts of the cs42l43 device and to external devices that wish to use its IRQs.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
Thank you for your patch. There is something to discuss/improve.
+static struct platform_driver cs42l43_irq_driver = {
- .driver = {
.name = "cs42l43-irq",- },
- .probe = cs42l43_irq_probe,
- .remove = cs42l43_irq_remove,
+}; +module_platform_driver(cs42l43_irq_driver);
+MODULE_DESCRIPTION("CS42L43 IRQ Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-irq");
You miss the ID table. Don't add aliases for missing ID entries. They do not scale and it is not their purpose.
diff --git a/include/linux/irqchip/cs42l43.h b/include/linux/irqchip/cs42l43.h new file mode 100644 index 0000000000000..99ce0dbc96a77 --- /dev/null +++ b/include/linux/irqchip/cs42l43.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/*
- CS42L43 IRQ driver external data
- Copyright (C) 2022-2023 Cirrus Logic, Inc. and
Cirrus Logic International Semiconductor Ltd.- */
+#ifndef CS42L43_IRQ_EXT_H +#define CS42L43_IRQ_EXT_H
+enum cs42l43_irq_numbers {
- CS42L43_PLL_LOST_LOCK,
- CS42L43_PLL_READY,
Are these really used by other subsystems? Your IRQ handling should be anyway next to the driver.
Best regards, Krzysztof
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the various pins, gpios, and pinmux for the 2 multi-function pins.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- MAINTAINERS | 1 + drivers/pinctrl/cirrus/Kconfig | 11 + drivers/pinctrl/cirrus/Makefile | 2 + drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 614 +++++++++++++++++++++++ 4 files changed, 628 insertions(+) create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
diff --git a/MAINTAINERS b/MAINTAINERS index 13945ee6cdcfe..2890f54f70afc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4930,6 +4930,7 @@ F: Documentation/devicetree/bindings/mfd/cirrus,cs* F: Documentation/devicetree/bindings/sound/cirrus,cs* F: drivers/irqchip/irq-cs42l43* F: drivers/mfd/cs42l43* +F: drivers/pinctrl/cirrus/pinctrl-cs42l43* F: include/dt-bindings/sound/cs* F: include/linux/irqchip/cs42l43* F: include/linux/mfd/cs42l43* diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig index 530426a74f751..d6318cb57aff2 100644 --- a/drivers/pinctrl/cirrus/Kconfig +++ b/drivers/pinctrl/cirrus/Kconfig @@ -1,4 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only +config PINCTRL_CS42L43 + tristate "Cirrus Logic CS42L43 Pinctrl Driver" + depends on MFD_CS42L43 + select GPIOLIB + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + Select this to support the GPIO/Pinctrl functions of the Cirrus + Logic CS42L43 PC CODEC. + config PINCTRL_LOCHNAGAR tristate "Cirrus Logic Lochnagar pinctrl driver" depends on MFD_LOCHNAGAR diff --git a/drivers/pinctrl/cirrus/Makefile b/drivers/pinctrl/cirrus/Makefile index a484518c840e3..9b618d7669071 100644 --- a/drivers/pinctrl/cirrus/Makefile +++ b/drivers/pinctrl/cirrus/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only # Cirrus Logic pinctrl drivers +obj-$(CONFIG_PINCTRL_CS42L43) += pinctrl-cs42l43.o + obj-$(CONFIG_PINCTRL_LOCHNAGAR) += pinctrl-lochnagar.o
pinctrl-madera-objs := pinctrl-madera-core.o diff --git a/drivers/pinctrl/cirrus/pinctrl-cs42l43.c b/drivers/pinctrl/cirrus/pinctrl-cs42l43.c new file mode 100644 index 0000000000000..df5bae1cefcd7 --- /dev/null +++ b/drivers/pinctrl/cirrus/pinctrl-cs42l43.c @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 Pinctrl and GPIO driver +// +// Copyright (c) 2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/bits.h> +#include <linux/build_bug.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#include "../pinctrl-utils.h" + +#define CS42L43_NUM_GPIOS 3 + +struct cs42l43_pin { + struct device *dev; + struct regmap *regmap; + bool shutters_locked; + + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range range; +}; + +struct cs42l43_pin_data { + unsigned int reg; + unsigned int shift; + unsigned int mask; +}; + +#define CS42L43_PIN(_number, _name, _reg, _field) { \ + .number = _number, .name = _name, \ + .drv_data = &((struct cs42l43_pin_data){ \ + .reg = CS42L43_##_reg, \ + .shift = CS42L43_##_field##_DRV_SHIFT, \ + .mask = CS42L43_##_field##_DRV_MASK, \ + }), \ +} + +static const struct pinctrl_pin_desc cs42l43_pin_pins[] = { + CS42L43_PIN(0, "gpio1", DRV_CTRL4, GPIO1), + CS42L43_PIN(1, "gpio2", DRV_CTRL4, GPIO2), + CS42L43_PIN(2, "gpio3", DRV_CTRL4, GPIO3), + CS42L43_PIN(3, "asp_dout", DRV_CTRL1, ASP_DOUT), + CS42L43_PIN(4, "asp_fsync", DRV_CTRL1, ASP_FSYNC), + CS42L43_PIN(5, "asp_bclk", DRV_CTRL1, ASP_BCLK), + CS42L43_PIN(6, "pdmout2_clk", DRV_CTRL3, PDMOUT2_CLK), + CS42L43_PIN(7, "pdmout2_data", DRV_CTRL3, PDMOUT2_DATA), + CS42L43_PIN(8, "pdmout1_clk", DRV_CTRL3, PDMOUT1_CLK), + CS42L43_PIN(9, "pdmout1_data", DRV_CTRL3, PDMOUT1_DATA), + CS42L43_PIN(10, "i2c_sda", DRV_CTRL3, I2C_SDA), + CS42L43_PIN(11, "i2c_scl", DRV_CTRL_5, I2C_SCL), + CS42L43_PIN(12, "spi_miso", DRV_CTRL3, SPI_MISO), + CS42L43_PIN(13, "spi_sck", DRV_CTRL_5, SPI_SCK), + CS42L43_PIN(14, "spi_ssb", DRV_CTRL_5, SPI_SSB), +}; + +static const unsigned int cs42l43_pin_gpio1_pins[] = { 0 }; +static const unsigned int cs42l43_pin_gpio2_pins[] = { 1 }; +static const unsigned int cs42l43_pin_gpio3_pins[] = { 2 }; +static const unsigned int cs42l43_pin_asp_pins[] = { 3, 4, 5 }; +static const unsigned int cs42l43_pin_pdmout2_pins[] = { 6, 7 }; +static const unsigned int cs42l43_pin_pdmout1_pins[] = { 8, 9 }; +static const unsigned int cs42l43_pin_i2c_pins[] = { 10, 11 }; +static const unsigned int cs42l43_pin_spi_pins[] = { 12, 13, 14 }; + +#define CS42L43_PINGROUP(_name) \ +(struct pingroup){ \ + .name = #_name, \ + .pins = cs42l43_pin_##_name##_pins, \ + .npins = ARRAY_SIZE(cs42l43_pin_##_name##_pins) \ +} + +static const struct pingroup cs42l43_pin_groups[] = { + CS42L43_PINGROUP(gpio1), + CS42L43_PINGROUP(gpio2), + CS42L43_PINGROUP(gpio3), + CS42L43_PINGROUP(asp), + CS42L43_PINGROUP(pdmout2), + CS42L43_PINGROUP(pdmout1), + CS42L43_PINGROUP(i2c), + CS42L43_PINGROUP(spi), +}; + +static int cs42l43_pin_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(cs42l43_pin_groups); +} + +static const char *cs42l43_pin_get_group_name(struct pinctrl_dev *pctldev, + unsigned int group_idx) +{ + return cs42l43_pin_groups[group_idx].name; +} + +static int cs42l43_pin_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group_idx, + const unsigned int **pins, + unsigned int *num_pins) +{ + *pins = cs42l43_pin_groups[group_idx].pins; + *num_pins = cs42l43_pin_groups[group_idx].npins; + + return 0; +} + +static const struct pinctrl_ops cs42l43_pin_group_ops = { + .get_groups_count = cs42l43_pin_get_groups_count, + .get_group_name = cs42l43_pin_get_group_name, + .get_group_pins = cs42l43_pin_get_group_pins, +#if IS_ENABLED(CONFIG_OF) + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinconf_generic_dt_free_map, +#endif +}; + +enum cs42l43_pin_funcs { + CS42L43_FUNC_GPIO, + CS42L43_FUNC_SPDIF, + CS42L43_FUNC_IRQ, + CS42L43_FUNC_MIC_SHT, + CS42L43_FUNC_SPK_SHT, + CS42L43_FUNC_MAX, +}; + +static const char * const cs42l43_pin_funcs[] = { + "gpio", "spdif", "irq", "mic-shutter", "spk-shutter" +}; + +static const char * const cs42l43_pin_gpio_groups[] = { "gpio1", "gpio3" }; +static const char * const cs42l43_pin_spdif_groups[] = { "gpio3" }; +static const char * const cs42l43_pin_irq_groups[] = { "gpio1" }; +static const char * const cs42l43_pin_shutter_groups[] = { "gpio1", "gpio2", "gpio3" }; + +struct cs42l43_pin_func_group { + const char * const *groups; + unsigned int ngroups; +}; + +static const struct cs42l43_pin_func_group cs42l43_pin_func_groups[] = { + { cs42l43_pin_gpio_groups, ARRAY_SIZE(cs42l43_pin_gpio_groups) }, + { cs42l43_pin_spdif_groups, ARRAY_SIZE(cs42l43_pin_spdif_groups) }, + { cs42l43_pin_irq_groups, ARRAY_SIZE(cs42l43_pin_irq_groups) }, + { cs42l43_pin_shutter_groups, ARRAY_SIZE(cs42l43_pin_shutter_groups) }, + { cs42l43_pin_shutter_groups, ARRAY_SIZE(cs42l43_pin_shutter_groups) }, +}; + +static int cs42l43_pin_get_func_count(struct pinctrl_dev *pctldev) +{ + BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_funcs) != CS42L43_FUNC_MAX); + BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_func_groups) != CS42L43_FUNC_MAX); + + return ARRAY_SIZE(cs42l43_pin_funcs); +} + +static const char *cs42l43_pin_get_func_name(struct pinctrl_dev *pctldev, + unsigned int func_idx) +{ + return cs42l43_pin_funcs[func_idx]; +} + +static int cs42l43_pin_get_func_groups(struct pinctrl_dev *pctldev, + unsigned int func_idx, + const char * const **groups, + unsigned int * const num_groups) +{ + *groups = cs42l43_pin_func_groups[func_idx].groups; + *num_groups = cs42l43_pin_func_groups[func_idx].ngroups; + + return 0; +} + +static int cs42l43_pin_set_mux(struct pinctrl_dev *pctldev, + unsigned int func_idx, unsigned int group_idx) +{ + struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev); + unsigned int reg, mask, val; + + dev_dbg(priv->dev, "Setting %s to %s\n", + cs42l43_pin_groups[group_idx].name, cs42l43_pin_funcs[func_idx]); + + switch (func_idx) { + case CS42L43_FUNC_MIC_SHT: + reg = CS42L43_SHUTTER_CONTROL; + mask = CS42L43_MIC_SHUTTER_CFG_MASK; + val = 0x2 << (group_idx + CS42L43_MIC_SHUTTER_CFG_SHIFT); + break; + case CS42L43_FUNC_SPK_SHT: + reg = CS42L43_SHUTTER_CONTROL; + mask = CS42L43_SPK_SHUTTER_CFG_MASK; + val = 0x2 << (group_idx + CS42L43_SPK_SHUTTER_CFG_SHIFT); + break; + default: + reg = CS42L43_GPIO_FN_SEL; + mask = BIT(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT); + val = (func_idx == CS42L43_FUNC_GPIO) << + (group_idx + CS42L43_GPIO1_FN_SEL_SHIFT); + break; + } + + if (priv->shutters_locked && reg == CS42L43_SHUTTER_CONTROL) { + dev_err(priv->dev, "Shutter configuration not available\n"); + return -EPERM; + } + + return regmap_update_bits(priv->regmap, reg, mask, val); +} + +static int cs42l43_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset, bool input) +{ + struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev); + unsigned int shift = offset + CS42L43_GPIO1_DIR_SHIFT; + int ret; + + dev_dbg(priv->dev, "Setting gpio%d to %s\n", + offset + 1, input ? "input" : "output"); + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for direction: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL1, + BIT(shift), !!input << shift); + if (ret) + dev_err(priv->dev, "Failed to set gpio%d direction: %d\n", + offset + 1, ret); + + pm_runtime_put(priv->dev); + + return ret; +} + +static int cs42l43_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset) +{ + return cs42l43_pin_set_mux(pctldev, 0, offset); +} + +static void cs42l43_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset) +{ + cs42l43_gpio_set_direction(pctldev, range, offset, true); +} + +static const struct pinmux_ops cs42l43_pin_mux_ops = { + .get_functions_count = cs42l43_pin_get_func_count, + .get_function_name = cs42l43_pin_get_func_name, + .get_function_groups = cs42l43_pin_get_func_groups, + + .set_mux = cs42l43_pin_set_mux, + + .gpio_request_enable = cs42l43_gpio_request_enable, + .gpio_disable_free = cs42l43_gpio_disable_free, + .gpio_set_direction = cs42l43_gpio_set_direction, + + .strict = true, +}; + +static const unsigned int cs42l43_pin_drv_str_ma[] = { 1, 2, 4, 8, 9, 10, 12, 16 }; + +static inline int cs42l43_pin_get_drv_str(struct cs42l43_pin *priv, unsigned int pin) +{ + const struct cs42l43_pin_data *pdat = cs42l43_pin_pins[pin].drv_data; + unsigned int val; + int ret; + + ret = regmap_read(priv->regmap, pdat->reg, &val); + if (ret) + return ret; + + return cs42l43_pin_drv_str_ma[(val & pdat->mask) >> pdat->shift]; +} + +static inline int cs42l43_pin_set_drv_str(struct cs42l43_pin *priv, unsigned int pin, + unsigned int ma) +{ + const struct cs42l43_pin_data *pdat = cs42l43_pin_pins[pin].drv_data; + int i; + + for (i = 0; i < ARRAY_SIZE(cs42l43_pin_drv_str_ma); i++) { + if (ma == cs42l43_pin_drv_str_ma[i]) { + if ((i << pdat->shift) > pdat->mask) + goto err; + + dev_dbg(priv->dev, "Set drive strength for %s to %d mA\n", + cs42l43_pin_pins[pin].name, ma); + + return regmap_update_bits(priv->regmap, pdat->reg, + pdat->mask, i << pdat->shift); + } + } + +err: + dev_err(priv->dev, "Invalid drive strength for %s: %d mA\n", + cs42l43_pin_pins[pin].name, ma); + return -EINVAL; +} + +static inline int cs42l43_pin_get_db(struct cs42l43_pin *priv, unsigned int pin) +{ + unsigned int val; + int ret; + + if (pin >= CS42L43_NUM_GPIOS) + return -ENOTSUPP; + + ret = regmap_read(priv->regmap, CS42L43_GPIO_CTRL2, &val); + if (ret) + return ret; + + if (val & (CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin)) + return 0; + else + return 85; // Debounce is roughly 85uS +} + +static inline int cs42l43_pin_set_db(struct cs42l43_pin *priv, unsigned int pin, + unsigned int us) +{ + if (pin >= CS42L43_NUM_GPIOS) + return -ENOTSUPP; + + dev_dbg(priv->dev, "Set debounce %s for %s\n", + us ? "on" : "off", cs42l43_pin_pins[pin].name); + + return regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL2, + CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin, + !!us << pin); +} + +static int cs42l43_pin_config_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev); + unsigned int param = pinconf_to_config_param(*config); + int ret; + + switch (param) { + case PIN_CONFIG_DRIVE_STRENGTH: + ret = cs42l43_pin_get_drv_str(priv, pin); + if (ret < 0) + return ret; + break; + case PIN_CONFIG_INPUT_DEBOUNCE: + ret = cs42l43_pin_get_db(priv, pin); + if (ret < 0) + return ret; + break; + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, ret); + + return 0; +} + +static int cs42l43_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int num_configs) +{ + struct cs42l43_pin *priv = pinctrl_dev_get_drvdata(pctldev); + unsigned int val; + int ret; + + while (num_configs) { + val = pinconf_to_config_argument(*configs); + + switch (pinconf_to_config_param(*configs)) { + case PIN_CONFIG_DRIVE_STRENGTH: + ret = cs42l43_pin_set_drv_str(priv, pin, val); + if (ret) + return ret; + break; + case PIN_CONFIG_INPUT_DEBOUNCE: + ret = cs42l43_pin_set_db(priv, pin, val); + if (ret) + return ret; + break; + default: + return -ENOTSUPP; + } + + ++configs; + --num_configs; + } + + return 0; +} + +static int cs42l43_pin_config_group_get(struct pinctrl_dev *pctldev, + unsigned int selector, unsigned long *config) +{ + int i, ret; + + for (i = 0; i < cs42l43_pin_groups[selector].npins; ++i) { + ret = cs42l43_pin_config_get(pctldev, + cs42l43_pin_groups[selector].pins[i], + config); + if (ret) + return ret; + } + + return 0; +} + +static int cs42l43_pin_config_group_set(struct pinctrl_dev *pctldev, + unsigned int selector, + unsigned long *configs, + unsigned int num_configs) +{ + int i, ret; + + for (i = 0; i < cs42l43_pin_groups[selector].npins; ++i) { + ret = cs42l43_pin_config_set(pctldev, + cs42l43_pin_groups[selector].pins[i], + configs, num_configs); + if (ret) + return ret; + } + + return 0; +} + +static const struct pinconf_ops cs42l43_pin_conf_ops = { + .is_generic = true, + + .pin_config_get = cs42l43_pin_config_get, + .pin_config_set = cs42l43_pin_config_set, + .pin_config_group_get = cs42l43_pin_config_group_get, + .pin_config_group_set = cs42l43_pin_config_group_set, +}; + +static struct pinctrl_desc cs42l43_pin_desc = { + .name = "cs42l43-pinctrl", + .owner = THIS_MODULE, + + .pins = cs42l43_pin_pins, + .npins = ARRAY_SIZE(cs42l43_pin_pins), + + .pctlops = &cs42l43_pin_group_ops, + .pmxops = &cs42l43_pin_mux_ops, + .confops = &cs42l43_pin_conf_ops, +}; + +static int cs42l43_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct cs42l43_pin *priv = gpiochip_get_data(chip); + unsigned int val; + int ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for get: %d\n", ret); + return ret; + } + + ret = regmap_read(priv->regmap, CS42L43_GPIO_STS, &val); + if (ret) + dev_err(priv->dev, "Failed to get gpio%d: %d\n", offset + 1, ret); + else + ret = !!(val & BIT(offset + CS42L43_GPIO1_STS_SHIFT)); + + pm_runtime_put(priv->dev); + + return ret; +} + +static void cs42l43_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct cs42l43_pin *priv = gpiochip_get_data(chip); + unsigned int shift = offset + CS42L43_GPIO1_LVL_SHIFT; + int ret; + + dev_dbg(priv->dev, "Setting gpio%d to %s\n", + offset + 1, value ? "high" : "low"); + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for set: %d\n", ret); + return; + } + + ret = regmap_update_bits(priv->regmap, CS42L43_GPIO_CTRL1, + BIT(shift), value << shift); + if (ret) + dev_err(priv->dev, "Failed to set gpio%d: %d\n", offset + 1, ret); + + pm_runtime_put(priv->dev); +} + +static int cs42l43_gpio_direction_in(struct gpio_chip *chip, unsigned int offset) +{ + return pinctrl_gpio_direction_input(chip->base + offset); +} + +static int cs42l43_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + cs42l43_gpio_set(chip, offset, value); + + return pinctrl_gpio_direction_output(chip->base + offset); +} + +static int cs42l43_pin_probe(struct platform_device *pdev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); + struct cs42l43_pin *priv; + struct pinctrl_dev *pctldev; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + priv->regmap = cs42l43->regmap; + + priv->shutters_locked = cs42l43->hw_lock; + + priv->gpio_chip.request = gpiochip_generic_request; + priv->gpio_chip.free = gpiochip_generic_free; + priv->gpio_chip.direction_input = cs42l43_gpio_direction_in; + priv->gpio_chip.direction_output = cs42l43_gpio_direction_out; + priv->gpio_chip.get = cs42l43_gpio_get; + priv->gpio_chip.set = cs42l43_gpio_set; + priv->gpio_chip.label = dev_name(priv->dev); + priv->gpio_chip.parent = priv->dev; + priv->gpio_chip.can_sleep = true; + priv->gpio_chip.base = -1; + priv->gpio_chip.ngpio = CS42L43_NUM_GPIOS; + priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev); + + if (is_of_node(dev_fwnode(cs42l43->dev))) { + device_set_node(priv->dev, + fwnode_get_named_child_node(dev_fwnode(cs42l43->dev), + "pinctrl")); + } else { + device_set_node(priv->dev, dev_fwnode(cs42l43->dev)); + } + + pm_runtime_enable(priv->dev); + pm_runtime_idle(priv->dev); + + pctldev = devm_pinctrl_register(priv->dev, &cs42l43_pin_desc, priv); + if (IS_ERR(pctldev)) { + ret = PTR_ERR(pctldev); + dev_err(priv->dev, "Failed to register pinctrl: %d\n", ret); + goto err_pm; + } + + ret = devm_gpiochip_add_data(priv->dev, &priv->gpio_chip, priv); + if (ret) { + dev_err(priv->dev, "Failed to register gpiochip: %d\n", ret); + goto err_pm; + } + + if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) { + ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label, + 0, 0, CS42L43_NUM_GPIOS); + if (ret) { + dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret); + goto err_pm; + } + } + + return 0; + +err_pm: + pm_runtime_disable(priv->dev); + + return ret; +} + +static int cs42l43_pin_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct platform_driver cs42l43_pin_driver = { + .driver = { + .name = "cs42l43-pinctrl", + }, + + .probe = cs42l43_pin_probe, + .remove = cs42l43_pin_remove, +}; +module_platform_driver(cs42l43_pin_driver); + +MODULE_DESCRIPTION("CS42L43 Pinctrl Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-pinctrl");
On 12/05/2023 14:28, Charles Keepax wrote:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the various pins, gpios, and pinmux for the 2 multi-function pins.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com
...
+{
- struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent);
- struct cs42l43_pin *priv;
- struct pinctrl_dev *pctldev;
- int ret;
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
return -ENOMEM;- priv->dev = &pdev->dev;
- priv->regmap = cs42l43->regmap;
- priv->shutters_locked = cs42l43->hw_lock;
- priv->gpio_chip.request = gpiochip_generic_request;
- priv->gpio_chip.free = gpiochip_generic_free;
- priv->gpio_chip.direction_input = cs42l43_gpio_direction_in;
- priv->gpio_chip.direction_output = cs42l43_gpio_direction_out;
- priv->gpio_chip.get = cs42l43_gpio_get;
- priv->gpio_chip.set = cs42l43_gpio_set;
- priv->gpio_chip.label = dev_name(priv->dev);
- priv->gpio_chip.parent = priv->dev;
- priv->gpio_chip.can_sleep = true;
- priv->gpio_chip.base = -1;
- priv->gpio_chip.ngpio = CS42L43_NUM_GPIOS;
- priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
- if (is_of_node(dev_fwnode(cs42l43->dev))) {
device_set_node(priv->dev,fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),"pinctrl"));
That's something unusual. It seems you want to bind to a DT node because you miss compatible in DT node?
- } else {
device_set_node(priv->dev, dev_fwnode(cs42l43->dev));- }
- pm_runtime_enable(priv->dev);
- pm_runtime_idle(priv->dev);
....
+static struct platform_driver cs42l43_pin_driver = {
- .driver = {
.name = "cs42l43-pinctrl",- },
- .probe = cs42l43_pin_probe,
- .remove = cs42l43_pin_remove,
+}; +module_platform_driver(cs42l43_pin_driver);
+MODULE_DESCRIPTION("CS42L43 Pinctrl Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-pinctrl");
Same comment, so I guess you have this pattern everywhere.
Best regards, Krzysztof
On Fri, May 12, 2023 at 05:30:37PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
- priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
- if (is_of_node(dev_fwnode(cs42l43->dev))) {
device_set_node(priv->dev,fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),"pinctrl"));That's something unusual. It seems you want to bind to a DT node because you miss compatible in DT node?
Kinda, I don't really want to add multiple compatibles for the device. This is just a CODEC device, even in device tree it seems a little weird to have multiple compatibles for a single I2C device. On ACPI I am pretty sure it would be considered flat out right wrong. The fact Linux supports the device using multiple drivers is seemed to be a Linux implementation detail, rather than describing the hardware.
The original (internal) version of the patches just had a single firmware node, but the DT schema would not verify because the node is both a pinctrl node and a spi node. And the pinctrl schema requires the node to be called "pinctrl" and the spi requires it to be called "spi", it is impossible to satisfy both.
Any advice/guidance you had on this one would be greatly appreciated?
- } else {
device_set_node(priv->dev, dev_fwnode(cs42l43->dev));- }
- pm_runtime_enable(priv->dev);
- pm_runtime_idle(priv->dev);
+MODULE_DESCRIPTION("CS42L43 Pinctrl Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-pinctrl");
Same comment, so I guess you have this pattern everywhere.
Yeah this is not problem to fix up, I was just unaware using the id_table was preferrable for MFD components, there are a lot of devices doing it both ways.
Thanks, Charles
On 12/05/2023 17:54, Charles Keepax wrote:
On Fri, May 12, 2023 at 05:30:37PM +0200, Krzysztof Kozlowski wrote:
On 12/05/2023 14:28, Charles Keepax wrote:
- priv->gpio_chip.fwnode = dev_fwnode(cs42l43->dev);
What's also a bit confusing is that gpio_chip is the parent's node, but pinctrl is not...
- if (is_of_node(dev_fwnode(cs42l43->dev))) {
device_set_node(priv->dev,fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),"pinctrl"));That's something unusual. It seems you want to bind to a DT node because you miss compatible in DT node?
Kinda, I don't really want to add multiple compatibles for the device. This is just a CODEC device, even in device tree it seems a little weird to have multiple compatibles for a single I2C device. On ACPI I am pretty sure it would be considered flat out right wrong. The fact Linux supports the device using multiple drivers is seemed to be a Linux implementation detail, rather than describing the hardware.
I think if you do not have compatible, then the device node should be rather the parent (so the main node with compatible), not the child. Child is just a wrapper for pinctrls, but not something representing a device.
Best regards, Krzysztof
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the various pins, gpios, and pinmux for the 2 multi-function pins.
...
+#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h>
Can you order them and split into a separate group that goes...
+#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h>
...here?
+#include "../pinctrl-utils.h"
...
+struct cs42l43_pin {
- struct device *dev;
- struct regmap *regmap;
- bool shutters_locked;
- struct gpio_chip gpio_chip;
If you move this to be the first member you might save a few bytes of code.
- struct pinctrl_gpio_range range;
Is it really needed here?
+};
...
+#define CS42L43_PIN(_number, _name, _reg, _field) { \
- .number = _number, .name = _name, \
- .drv_data = &((struct cs42l43_pin_data){ \
.reg = CS42L43_##_reg, \.shift = CS42L43_##_field##_DRV_SHIFT, \.mask = CS42L43_##_field##_DRV_MASK, \- }), \
Do you need this to be GCC extention for the value evaluation? I mean the compound literal, IIRC, can be used directly as
.foo = &(struct foo){ ... },
Am I mistaken?
+}
...
+#define CS42L43_PINGROUP(_name) \
Use PINCTRL_PINGROUP() instead of open coded.
+(struct pingroup){ \
- .name = #_name, \
- .pins = cs42l43_pin_##_name##_pins, \
- .npins = ARRAY_SIZE(cs42l43_pin_##_name##_pins) \
+}
...
+enum cs42l43_pin_funcs {
- CS42L43_FUNC_GPIO,
- CS42L43_FUNC_SPDIF,
- CS42L43_FUNC_IRQ,
- CS42L43_FUNC_MIC_SHT,
- CS42L43_FUNC_SPK_SHT,
- CS42L43_FUNC_MAX,
No comma for the terminator entry
+};
...
+static const char * const cs42l43_pin_funcs[] = {
- "gpio", "spdif", "irq", "mic-shutter", "spk-shutter"
I would keep trailing comma.
+};
...
+struct cs42l43_pin_func_group {
- const char * const *groups;
- unsigned int ngroups;
+};
We have struct pinfunction.
+static const struct cs42l43_pin_func_group cs42l43_pin_func_groups[] = {
- { cs42l43_pin_gpio_groups, ARRAY_SIZE(cs42l43_pin_gpio_groups) },
- { cs42l43_pin_spdif_groups, ARRAY_SIZE(cs42l43_pin_spdif_groups) },
- { cs42l43_pin_irq_groups, ARRAY_SIZE(cs42l43_pin_irq_groups) },
- { cs42l43_pin_shutter_groups, ARRAY_SIZE(cs42l43_pin_shutter_groups) },
- { cs42l43_pin_shutter_groups, ARRAY_SIZE(cs42l43_pin_shutter_groups) },
We have PINCTRL_PINFUNCTION().
+};
...
+static int cs42l43_pin_get_func_count(struct pinctrl_dev *pctldev) +{
- BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_funcs) != CS42L43_FUNC_MAX);
- BUILD_BUG_ON(ARRAY_SIZE(cs42l43_pin_func_groups) != CS42L43_FUNC_MAX);
Use static_assert() in the global scope instead.
- return ARRAY_SIZE(cs42l43_pin_funcs);
+}
...
- default:
reg = CS42L43_GPIO_FN_SEL;mask = BIT(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);val = (func_idx == CS42L43_FUNC_GPIO) <<(group_idx + CS42L43_GPIO1_FN_SEL_SHIFT);
This would be better as ternary.
break;- }
...
- dev_dbg(priv->dev, "Setting gpio%d to %s\n",
offset + 1, input ? "input" : "output");
How ' + 1' part won't be confusing?
...
+static inline int cs42l43_pin_get_db(struct cs42l43_pin *priv, unsigned int pin) +{
- unsigned int val;
- int ret;
- if (pin >= CS42L43_NUM_GPIOS)
return -ENOTSUPP;- ret = regmap_read(priv->regmap, CS42L43_GPIO_CTRL2, &val);
- if (ret)
return ret;- if (val & (CS42L43_GPIO1_DEGLITCH_BYP_MASK << pin))
return 0;
- else
Redundant.
return 85; // Debounce is roughly 85uS
// Debounce is roughly 85uS return 85;
+}
...
- dev_dbg(priv->dev, "Set debounce %s for %s\n",
us ? "on" : "off", cs42l43_pin_pins[pin].name);
str_on_off()
...
++configs;--num_configs;
Why preincrements?
...
- if (is_of_node(dev_fwnode(cs42l43->dev))) {
device_set_node(priv->dev,fwnode_get_named_child_node(dev_fwnode(cs42l43->dev),"pinctrl"));- } else {
device_set_node(priv->dev, dev_fwnode(cs42l43->dev));- }
This can be called once after if.
...
- pctldev = devm_pinctrl_register(priv->dev, &cs42l43_pin_desc, priv);
- if (IS_ERR(pctldev)) {
ret = PTR_ERR(pctldev);dev_err(priv->dev, "Failed to register pinctrl: %d\n", ret);
ret = dev_err_probe();
Same for other similar cases.
goto err_pm;- }
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
...
+static int cs42l43_pin_remove(struct platform_device *pdev) +{
- pm_runtime_disable(&pdev->dev);
This is simply wrong order because it's a mix of non-devm_*() followed by devm_*() calls in the probe.
- return 0;
+}
...
+static struct platform_driver cs42l43_pin_driver = {
- .driver = {
.name = "cs42l43-pinctrl",- },
Redundant blank line.
- .probe = cs42l43_pin_probe,
- .remove = cs42l43_pin_remove,
+};
On Fri, May 12, 2023 at 10:19:14PM +0300, andy.shevchenko@gmail.com wrote:
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the various pins, gpios, and pinmux for the 2 multi-function pins.
Thanks for the review, will fix up most of the comments.
+#define CS42L43_PIN(_number, _name, _reg, _field) { \
- .number = _number, .name = _name, \
- .drv_data = &((struct cs42l43_pin_data){ \
.reg = CS42L43_##_reg, \.shift = CS42L43_##_field##_DRV_SHIFT, \.mask = CS42L43_##_field##_DRV_MASK, \- }), \
Do you need this to be GCC extention for the value evaluation? I mean the compound literal, IIRC, can be used directly as
.foo = &(struct foo){ ... },
Am I mistaken?
I will double check this, I had a feeling it needed the GCC extension.
- dev_dbg(priv->dev, "Setting gpio%d to %s\n",
offset + 1, input ? "input" : "output");How ' + 1' part won't be confusing?
Kinda an un-avoidable confusion somewhere, the GPIOs in the datasheet are numbered from one. So this makes the debug print match the datasheet name for the pin, which is used in the pinctrl strings as well.
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
Apologies but I am not quite sure I follow you, in the device tree case this will be handled by the GPIO library. But for ACPI this information does not exist so has to be called manually, the library does not necessarily know which values to call with, although admittedly our case is trivial but not all are.
...
+static int cs42l43_pin_remove(struct platform_device *pdev) +{
- pm_runtime_disable(&pdev->dev);
This is simply wrong order because it's a mix of non-devm_*() followed by devm_*() calls in the probe.
I had missed there are now devm_pm_runtime calls, I will switch to that. But I would like to understand the wrong order, remove will be called before the devm bits are destroyed and it seems reasonable to disable the pm_runtime before destroying the pinctrl device. What exactly would run in the wrong order here?
Thanks, Charles
On Mon, May 15, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 10:19:14PM +0300, andy.shevchenko@gmail.com wrote:
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
...
- dev_dbg(priv->dev, "Setting gpio%d to %s\n",
offset + 1, input ? "input" : "output");How ' + 1' part won't be confusing?
Kinda an un-avoidable confusion somewhere, the GPIOs in the datasheet are numbered from one. So this makes the debug print match the datasheet name for the pin, which is used in the pinctrl strings as well.
The problem here is that the entire Linux pin control and GPIO cores in their debug/info/error messages will use offset + 0. With the above invention it will well make users confused a lot. I think you need a Linus W blessing for this.
...
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
Apologies but I am not quite sure I follow you, in the device tree case this will be handled by the GPIO library. But for ACPI this information does not exist so has to be called manually, the library does not necessarily know which values to call with, although admittedly our case is trivial but not all are.
Why can't the firmware provide this information? _DSD() is a part of ACPI v5.1 IIRC.
Although it might require moving some code from gpiolib-of.c to gpiolib.c with replacing OF APIs with agnostic ones.
...
+static int cs42l43_pin_remove(struct platform_device *pdev) +{
- pm_runtime_disable(&pdev->dev);
This is simply wrong order because it's a mix of non-devm_*() followed by devm_*() calls in the probe.
I had missed there are now devm_pm_runtime calls, I will switch to that. But I would like to understand the wrong order, remove will be called before the devm bits are destroyed and it seems reasonable to disable the pm_runtime before destroying the pinctrl device. What exactly would run in the wrong order here?
At the ->remove() stage after this call an IRQ can be fired (or on SMP systems any other APIs can be called), for example. So, would it be a problem to service it with PM disabled?
But in any case the shuffling ordering like this is prone to subtle bugs. I prefer to have strict ordering if there is nothing preventing from doing that way.
On Tue, May 16, 2023 at 10:03:45PM +0300, Andy Shevchenko wrote:
On Mon, May 15, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 10:19:14PM +0300, andy.shevchenko@gmail.com wrote:
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
Apologies but I am not quite sure I follow you, in the device tree case this will be handled by the GPIO library. But for ACPI this information does not exist so has to be called manually, the library does not necessarily know which values to call with, although admittedly our case is trivial but not all are.
Why can't the firmware provide this information? _DSD() is a part of ACPI v5.1 IIRC.
I am very very far from confident we can guarantee that will be present in the ACPI. The ACPI is typically made for and by the Windows side.
Although it might require moving some code from gpiolib-of.c to gpiolib.c with replacing OF APIs with agnostic ones.
I really think if we want to start doing things that way on ACPI platforms someone with a little more clout than us needs to start doing it first. If Intel or someone was doing it that way it might give us a little more levelage to push it as being the "correct" way to do it.
I will switch to the callback, but really don't think we can rely on this being in DSD yet.
+static int cs42l43_pin_remove(struct platform_device *pdev) +{
- pm_runtime_disable(&pdev->dev);
This is simply wrong order because it's a mix of non-devm_*() followed by devm_*() calls in the probe.
I had missed there are now devm_pm_runtime calls, I will switch to that. But I would like to understand the wrong order, remove will be called before the devm bits are destroyed and it seems reasonable to disable the pm_runtime before destroying the pinctrl device. What exactly would run in the wrong order here?
At the ->remove() stage after this call an IRQ can be fired (or on SMP systems any other APIs can be called), for example. So, would it be a problem to service it with PM disabled?
But in any case the shuffling ordering like this is prone to subtle bugs. I prefer to have strict ordering if there is nothing preventing from doing that way.
Yeah happy enough to use devm_ here, just didn't know it existed and wanted to better understand your concerns as I was having difficulty seeing the issue.
Thanks, Charles
On Wed, May 17, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Tue, May 16, 2023 at 10:03:45PM +0300, Andy Shevchenko wrote:
On Mon, May 15, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 10:19:14PM +0300, andy.shevchenko@gmail.com wrote:
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
Apologies but I am not quite sure I follow you, in the device tree case this will be handled by the GPIO library. But for ACPI this information does not exist so has to be called manually, the library does not necessarily know which values to call with, although admittedly our case is trivial but not all are.
Why can't the firmware provide this information? _DSD() is a part of ACPI v5.1 IIRC.
I am very very far from confident we can guarantee that will be present in the ACPI. The ACPI is typically made for and by the Windows side.
Why? You may insist firmware vendors / OEMs to use that as a requirement to the platforms that would like to use your chip. The _DSD() is part of the specification, I don't see how the above can be an argument.
The times when ACPI == Windows are quite behind.
Although it might require moving some code from gpiolib-of.c to gpiolib.c with replacing OF APIs with agnostic ones.
I really think if we want to start doing things that way on ACPI platforms someone with a little more clout than us needs to start doing it first. If Intel or someone was doing it that way it might give us a little more levelage to push it as being the "correct" way to do it.
So, we have the meta-acpi [1] project which contains dozens of examples on how ACPI DSD is being used for real devices, besides some documentation in the Linux kernel.
I will switch to the callback, but really don't think we can rely on this being in DSD yet.
Why not?
...
I had missed there are now devm_pm_runtime calls,
Btw, even if there is no such API one can always call devm_add_action() / devm_add_action_or_reset() to open code such a call.
I will switch to that. But I would like to understand the wrong order, remove will be called before the devm bits are destroyed and it seems reasonable to disable the pm_runtime before destroying the pinctrl device. What exactly would run in the wrong order here?
At the ->remove() stage after this call an IRQ can be fired (or on SMP systems any other APIs can be called), for example. So, would it be a problem to service it with PM disabled?
But in any case the shuffling ordering like this is prone to subtle bugs. I prefer to have strict ordering if there is nothing preventing from doing that way.
Yeah happy enough to use devm_ here, just didn't know it existed and wanted to better understand your concerns as I was having difficulty seeing the issue.
Ah, you are welcome!
...
[1]: https://github.com/westeri/meta-acpi/tree/master/recipes-bsp/acpi-tables/sam... (mostly under edison/ folder)
On 5/17/23 08:59, Andy Shevchenko wrote:
On Wed, May 17, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Tue, May 16, 2023 at 10:03:45PM +0300, Andy Shevchenko wrote:
On Mon, May 15, 2023 at 1:13āÆPM Charles Keepax ckeepax@opensource.cirrus.com wrote:
On Fri, May 12, 2023 at 10:19:14PM +0300, andy.shevchenko@gmail.com wrote:
Fri, May 12, 2023 at 01:28:36PM +0100, Charles Keepax kirjoitti:
- if (!of_property_read_bool(dev_of_node(cs42l43->dev), "gpio-ranges")) {
ret = gpiochip_add_pin_range(&priv->gpio_chip, priv->gpio_chip.label,0, 0, CS42L43_NUM_GPIOS);if (ret) {dev_err(priv->dev, "Failed to add GPIO pin range: %d\n", ret);goto err_pm;}- }
Besides the fact that we have a callback for this, why GPIO library can't handle this for you already?
Apologies but I am not quite sure I follow you, in the device tree case this will be handled by the GPIO library. But for ACPI this information does not exist so has to be called manually, the library does not necessarily know which values to call with, although admittedly our case is trivial but not all are.
Why can't the firmware provide this information? _DSD() is a part of ACPI v5.1 IIRC.
I am very very far from confident we can guarantee that will be present in the ACPI. The ACPI is typically made for and by the Windows side.
Why? You may insist firmware vendors / OEMs to use that as a requirement to the platforms that would like to use your chip. The _DSD() is part of the specification, I don't see how the above can be an argument.
The times when ACPI == Windows are quite behind.
This is one of those Yogi Berra-isms: In theory, there is no difference between theory and practice. In practice there is.
DSD is not really used indeed for audio devices. Even for SoundWire where we inked the requirement to use DSD in a MIPI standardization document, the only _DSD properties are for the manager side, the peripheral side information is not populated or mostly useless/incorrect. Most codec drivers hard-code the properties that were intended to be set in the DSDT.
Unless there is firm evidence that the firmware does provide the required DSD properties we can assume it does not. We can't force the ecosystem to use DSD, even if it makes sense. it's frustrating but it is what it is.
On Wed, May 17, 2023 at 04:59:50PM +0300, Andy Shevchenko wrote:
On Wed, May 17, 2023 at 1:13āÆPM Charles Keepax
I am very very far from confident we can guarantee that will be present in the ACPI. The ACPI is typically made for and by the Windows side.
Why? You may insist firmware vendors / OEMs to use that as a requirement to the platforms that would like to use your chip. The _DSD() is part of the specification, I don't see how the above can be an argument.
The times when ACPI == Windows are quite behind.
Nobody is going to loose a sale over something like that, especially when it's just not idiomatic. It's very unlikely to even be worth the effort of educating customers who don't care what DSD is when there's no ecosystem push for it, it'd just make you look difficult and weird.
From: Lucas Tanure tanureal@opensource.cirrus.com
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The SPI component incorporates a SPI controller interface for communication with other peripheral components.
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Signed-off-by: Maciej Strozek mstrozek@opensource.cirrus.com Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- MAINTAINERS | 1 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-cs42l43.c | 287 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 296 insertions(+) create mode 100644 drivers/spi/spi-cs42l43.c
diff --git a/MAINTAINERS b/MAINTAINERS index 2890f54f70afc..ca4aa5cc43b7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4931,6 +4931,7 @@ F: Documentation/devicetree/bindings/sound/cirrus,cs* F: drivers/irqchip/irq-cs42l43* F: drivers/mfd/cs42l43* F: drivers/pinctrl/cirrus/pinctrl-cs42l43* +F: drivers/spi/spi-cs42l43* F: include/dt-bindings/sound/cs* F: include/linux/irqchip/cs42l43* F: include/linux/mfd/cs42l43* diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3de2ebe8294aa..f6ce06de41051 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -281,6 +281,13 @@ config SPI_COLDFIRE_QSPI This enables support for the Coldfire QSPI controller in master mode.
+config SPI_CS42L43 + tristate "Cirrus Logic CS42L43 SPI controller" + depends on MFD_CS42L43 && PINCTRL_CS42L43 + help + This enables support for the SPI controller inside the Cirrus Logic + CS42L43 audio codec. + config SPI_DAVINCI tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 28c4817a8a74a..49937ea0d73d0 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_CADENCE_QUADSPI) += spi-cadence-quadspi.o obj-$(CONFIG_SPI_CADENCE_XSPI) += spi-cadence-xspi.o obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o +obj-$(CONFIG_SPI_CS42L43) += spi-cs42l43.o obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o obj-$(CONFIG_SPI_DLN2) += spi-dln2.o obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c new file mode 100644 index 0000000000000..f48999e1a74d9 --- /dev/null +++ b/drivers/spi/spi-cs42l43.c @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 SPI Controller Driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#define CS42L43_FIFO_SIZE 16 +#define CS42L43_SPI_ROOT_HZ 40000000 +#define CS42L43_SPI_MAX_LENGTH 65532 + +enum cs42l43_spi_cmd { + CS42L43_WRITE, + CS42L43_READ +}; + +struct cs42l43_spi { + struct device *dev; + struct regmap *regmap; + struct spi_controller *ctlr; +}; + +static unsigned int cs42l43_clock_divs[16] = { + 2, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 +}; + +static int cs42l43_spi_tx(struct regmap *regmap, const u8 *buf, unsigned int len) +{ + const u8 *end = buf + len; + u32 val; + int ret; + + while (buf < end) { + const u8 *block = min_t(const u8 *, buf + CS42L43_FIFO_SIZE, end); + + for (; buf < block - (sizeof(u32) - 1); buf += sizeof(u32)) + regmap_write(regmap, CS42L43_TX_DATA, *(const u32 *)buf); + + if (buf < block) { + unsigned int residue = end - buf; + + memcpy(&val, buf, residue); + regmap_write(regmap, CS42L43_TX_DATA, val); + buf += residue; + } + + regmap_write(regmap, CS42L43_TRAN_CONFIG8, CS42L43_SPI_TX_DONE_MASK); + + ret = regmap_read_poll_timeout(regmap, CS42L43_TRAN_STATUS1, + val, (val & CS42L43_SPI_TX_REQUEST_MASK), + 1000, 5000); + if (ret) + return ret; + } + + return 0; +} + +static int cs42l43_spi_rx(struct regmap *regmap, u8 *buf, unsigned int len) +{ + const u8 *end = buf + len; + u32 val; + int ret; + + while (buf < end) { + const u8 *block = min_t(const u8 *, buf + CS42L43_FIFO_SIZE, end); + + ret = regmap_read_poll_timeout(regmap, CS42L43_TRAN_STATUS1, + val, (val & CS42L43_SPI_RX_REQUEST_MASK), + 1000, 5000); + if (ret) + return ret; + + for (; buf < block - (sizeof(u32) - 1); buf += sizeof(u32)) { + ret = regmap_read(regmap, CS42L43_RX_DATA, (u32 *)buf); + if (ret) + return ret; + } + + if (buf < block) { + unsigned int residue = end - buf; + + ret = regmap_read(regmap, CS42L43_RX_DATA, &val); + if (ret) + return ret; + + memcpy(buf, &val, residue); + buf += residue; + } + + regmap_write(regmap, CS42L43_TRAN_CONFIG8, CS42L43_SPI_RX_DONE_MASK); + } + + return 0; +} + +static int cs42l43_transfer_one(struct spi_controller *ctlr, struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct cs42l43_spi *priv = spi_controller_get_devdata(spi->controller); + int i, ret = -EINVAL; + + for (i = 0; i < ARRAY_SIZE(cs42l43_clock_divs); i++) { + if (CS42L43_SPI_ROOT_HZ / cs42l43_clock_divs[i] <= tfr->speed_hz) + break; + } + + if (i == ARRAY_SIZE(cs42l43_clock_divs)) + return -EINVAL; + + regmap_write(priv->regmap, CS42L43_SPI_CLK_CONFIG1, i); + + if (tfr->tx_buf) { + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG3, CS42L43_WRITE); + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG4, tfr->len - 1); + } else if (tfr->rx_buf) { + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG3, CS42L43_READ); + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG5, tfr->len - 1); + } + + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG1, CS42L43_SPI_START_MASK); + + if (tfr->tx_buf) + ret = cs42l43_spi_tx(priv->regmap, (const u8 *)tfr->tx_buf, tfr->len); + else if (tfr->rx_buf) + ret = cs42l43_spi_rx(priv->regmap, (u8 *)tfr->rx_buf, tfr->len); + + return ret; +} + +static void cs42l43_set_cs(struct spi_device *spi, bool is_high) +{ + struct cs42l43_spi *priv = spi_controller_get_devdata(spi->controller); + + if (spi->chip_select == 0) + regmap_write(priv->regmap, CS42L43_SPI_CONFIG2, !is_high); +} + +static int cs42l43_prepare_message(struct spi_controller *ctlr, struct spi_message *msg) +{ + struct cs42l43_spi *priv = spi_controller_get_devdata(ctlr); + struct spi_device *spi = msg->spi; + unsigned int spi_config1 = 0; + + /* select another internal CS, which doesn't exist, so CS 0 is not used */ + if (spi->cs_gpiod) + spi_config1 |= 1 << CS42L43_SPI_SS_SEL_SHIFT; + if (spi->mode & SPI_CPOL) + spi_config1 |= CS42L43_SPI_CPOL_MASK; + if (spi->mode & SPI_CPHA) + spi_config1 |= CS42L43_SPI_CPHA_MASK; + if (spi->mode & SPI_3WIRE) + spi_config1 |= CS42L43_SPI_THREE_WIRE_MASK; + + regmap_write(priv->regmap, CS42L43_SPI_CONFIG1, spi_config1); + + return 0; +} + +static int cs42l43_prepare_transfer_hardware(struct spi_controller *ctlr) +{ + struct cs42l43_spi *priv = spi_controller_get_devdata(ctlr); + int ret; + + ret = regmap_write(priv->regmap, CS42L43_BLOCK_EN2, CS42L43_SPI_MSTR_EN_MASK); + if (ret) { + dev_err(priv->dev, "Failed to enable SPI controller: %d\n", ret); + return ret; + } + + return 0; +} + +static int cs42l43_unprepare_transfer_hardware(struct spi_controller *ctlr) +{ + struct cs42l43_spi *priv = spi_controller_get_devdata(ctlr); + int ret; + + ret = regmap_write(priv->regmap, CS42L43_BLOCK_EN2, 0); + if (ret) { + dev_err(priv->dev, "Failed to disable SPI controller: %d\n", ret); + return ret; + } + + return 0; +} + +static size_t cs42l43_spi_max_length(struct spi_device *spi) +{ + return CS42L43_SPI_MAX_LENGTH; +} + +static int cs42l43_spi_probe(struct platform_device *pdev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); + struct cs42l43_spi *priv; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*priv->ctlr)); + if (!priv->ctlr) + return -ENOMEM; + + spi_controller_set_devdata(priv->ctlr, priv); + + priv->dev = &pdev->dev; + priv->regmap = cs42l43->regmap; + + priv->ctlr->prepare_message = cs42l43_prepare_message; + priv->ctlr->prepare_transfer_hardware = cs42l43_prepare_transfer_hardware; + priv->ctlr->unprepare_transfer_hardware = cs42l43_unprepare_transfer_hardware; + priv->ctlr->transfer_one = cs42l43_transfer_one; + priv->ctlr->set_cs = cs42l43_set_cs; + priv->ctlr->max_transfer_size = cs42l43_spi_max_length; + + if (is_of_node(dev_fwnode(cs42l43->dev))) { + priv->ctlr->dev.fwnode = + fwnode_get_named_child_node(dev_fwnode(cs42l43->dev), "spi"); + priv->ctlr->dev.of_node = to_of_node(dev_fwnode(&priv->ctlr->dev)); + } else { + priv->ctlr->dev.fwnode = dev_fwnode(priv->dev); + } + + priv->ctlr->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL; + priv->ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; + priv->ctlr->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16) | + SPI_BPW_MASK(32); + priv->ctlr->min_speed_hz = CS42L43_SPI_ROOT_HZ / + cs42l43_clock_divs[ARRAY_SIZE(cs42l43_clock_divs) - 1]; + priv->ctlr->max_speed_hz = CS42L43_SPI_ROOT_HZ / cs42l43_clock_divs[0]; + priv->ctlr->use_gpio_descriptors = true; + priv->ctlr->auto_runtime_pm = true; + + pm_runtime_enable(priv->dev); + pm_runtime_idle(priv->dev); + + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG6, CS42L43_FIFO_SIZE - 1); + regmap_write(priv->regmap, CS42L43_TRAN_CONFIG7, CS42L43_FIFO_SIZE - 1); + + // Disable Watchdog timer and enable stall + regmap_write(priv->regmap, CS42L43_SPI_CONFIG3, 0); + regmap_write(priv->regmap, CS42L43_SPI_CONFIG4, CS42L43_SPI_STALL_ENA_MASK); + + ret = devm_spi_register_controller(priv->dev, priv->ctlr); + if (ret) { + pm_runtime_disable(priv->dev); + dev_err(priv->dev, "Failed to register SPI controller: %d\n", ret); + } + + return ret; +} + +static int cs42l43_spi_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct platform_driver cs42l43_spi_driver = { + .driver = { + .name = "cs42l43-spi", + }, + + .probe = cs42l43_spi_probe, + .remove = cs42l43_spi_remove, +}; +module_platform_driver(cs42l43_spi_driver); + +MODULE_DESCRIPTION("CS42L43 SPI Driver"); +MODULE_AUTHOR("Lucas Tanure tanureal@opensource.cirrus.com"); +MODULE_AUTHOR("Maciej Strozek mstrozek@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-spi");
Fri, May 12, 2023 at 01:28:37PM +0100, Charles Keepax kirjoitti:
From: Lucas Tanure tanureal@opensource.cirrus.com
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The SPI component incorporates a SPI controller interface for communication with other peripheral components.
...
+#define CS42L43_SPI_ROOT_HZ 40000000
HZ_PER_MHZ?
...
const u8 *block = min_t(const u8 *, buf + CS42L43_FIFO_SIZE, end);
Wouldn't min() work?
...
for (; buf < block - (sizeof(u32) - 1); buf += sizeof(u32))regmap_write(regmap, CS42L43_TX_DATA, *(const u32 *)buf);
This casting might be potentially wrong taking alignment into consideration. Perhaps you need get_unaligned(). Also here the return value isn't checked, while in the read it is.
...
const u8 *block = min_t(const u8 *, buf + CS42L43_FIFO_SIZE, end);
min() ?
...
for (; buf < block - (sizeof(u32) - 1); buf += sizeof(u32)) {ret = regmap_read(regmap, CS42L43_RX_DATA, (u32 *)buf);
put_unaligned() ?
if (ret)return ret;}
...
+static int cs42l43_prepare_transfer_hardware(struct spi_controller *ctlr) +{
- struct cs42l43_spi *priv = spi_controller_get_devdata(ctlr);
- int ret;
- ret = regmap_write(priv->regmap, CS42L43_BLOCK_EN2, CS42L43_SPI_MSTR_EN_MASK);
- if (ret) {
dev_err(priv->dev, "Failed to enable SPI controller: %d\n", ret);
return ret;- }
- return 0;
return ret; ?
+}
+static int cs42l43_unprepare_transfer_hardware(struct spi_controller *ctlr) +{
- struct cs42l43_spi *priv = spi_controller_get_devdata(ctlr);
- int ret;
- ret = regmap_write(priv->regmap, CS42L43_BLOCK_EN2, 0);
- if (ret) {
dev_err(priv->dev, "Failed to disable SPI controller: %d\n", ret);return ret;- }
- return 0;
Ditto.
+}
...
- if (is_of_node(dev_fwnode(cs42l43->dev))) {
priv->ctlr->dev.fwnode =fwnode_get_named_child_node(dev_fwnode(cs42l43->dev), "spi");priv->ctlr->dev.of_node = to_of_node(dev_fwnode(&priv->ctlr->dev));- } else {
priv->ctlr->dev.fwnode = dev_fwnode(priv->dev);- }
Can you use device_set_node() once you have an fwnode that needs to be passed?
...
- priv->ctlr->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL;
SPI_MODE_X_MASK
...
+static struct platform_driver cs42l43_spi_driver = {
- .driver = {
.name = "cs42l43-spi",- },
Unneeded blank line.
- .probe = cs42l43_spi_probe,
- .remove = cs42l43_spi_remove,
+};
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones.
The ASoC component provides the majority of the functionality of the device, all the audio functions.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- include/sound/cs42l43.h | 84 ++ sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs42l43-jack.c | 946 +++++++++++++ sound/soc/codecs/cs42l43-sdw.c | 75 + sound/soc/codecs/cs42l43.c | 2270 +++++++++++++++++++++++++++++++ sound/soc/codecs/cs42l43.h | 117 ++ 7 files changed, 3512 insertions(+) create mode 100644 include/sound/cs42l43.h create mode 100644 sound/soc/codecs/cs42l43-jack.c create mode 100644 sound/soc/codecs/cs42l43-sdw.c create mode 100644 sound/soc/codecs/cs42l43.c create mode 100644 sound/soc/codecs/cs42l43.h
diff --git a/include/sound/cs42l43.h b/include/sound/cs42l43.h new file mode 100644 index 0000000000000..04e17bbf89f45 --- /dev/null +++ b/include/sound/cs42l43.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CS42L43 CODEC driver external data + * + * Copyright (C) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#ifndef CS42L43_ASOC_EXT_H +#define CS42L43_ASOC_EXT_H + +#define CS42L43_SYSCLK 0 + +#define CS42L43_SYSCLK_MCLK 0 +#define CS42L43_SYSCLK_SDW 1 + +#define CS42L43_N_BUTTONS 6 + +/** + * struct cs42l43_plug_pdata - Configuration data for tip/ring sense. + * + * @invert: Boolean indicating pin polarity, inverted implies open-circuit + * whilst the jack is inserted. + * @pullup: Boolean indicating if the cs42l43 should apply its internal + * pull up to the pin. + * @fall_db_ms: Time in milliseconds a falling edge on the pin should be + * debounced for. Note the falling edge is considered after + * the invert. + * @rise_db_ms: Time in milliseconds a rising edge on the pin should be + * debounced for. Note the rising edge is considered after + * the invert. + */ +struct cs42l43_plug_pdata { + bool invert; + bool pullup; + unsigned int fall_db_ms; + unsigned int rise_db_ms; +}; + +/** + * struct cs42l43_button_pdata - Configuration data for button detect. + * + * @threshold: Impedance in Ohms under which this button will be + * considered active. + * @button: Value to be reported for this button taken from + * snd_jack_types. + */ +struct cs42l43_button_pdata { + unsigned int threshold; + unsigned int button; +}; + +/** + * struct cs42l43_jack_pdata - Configuration data for the accessory detect. + * + * @tip_debounce_ms: Software debounce on tip sense triggering in milliseconds. + * @tip: Configuration data for the tip sense pin. + * @ring: Configuration data for the ring sense pin. + * @use_ring_sense: Boolean indicating if the ring sense pin will be used. + * @bias_low: Select a 1.8V micbias rather than the default 2.8V. + * @bias_sense_ua: Current at which the bias_sense clamp will engage, 0 to disable. + * @bias_ramp_ms: Time in milliseconds the hardware allows for the headset + * bias to ramp up. + * @detect_us: Time in microseconds the type detection will be run for. + * @enable_button_automute: Enable the hardware automuting of decimator 1 + * when a headset button is pressed. + * @buttons: Array of button entries. + */ +struct cs42l43_jack_pdata { + int tip_debounce_ms; + struct cs42l43_plug_pdata tip; + struct cs42l43_plug_pdata ring; + bool use_ring_sense; + + unsigned int bias_low; + unsigned int bias_sense_ua; + unsigned int bias_ramp_ms; + unsigned int detect_us; + + bool enable_button_automute; + struct cs42l43_button_pdata buttons[CS42L43_N_BUTTONS]; +}; + +#endif /* CS42L43_ASOC_EXT_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 8020097d4e4c8..449ff6d267e3e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -73,6 +73,8 @@ config SND_SOC_ALL_CODECS imply SND_SOC_CS35L56_SDW imply SND_SOC_CS42L42 imply SND_SOC_CS42L42_SDW + imply SND_SOC_CS42L43 + imply SND_SOC_CS42L43_SDW imply SND_SOC_CS42L51_I2C imply SND_SOC_CS42L52 imply SND_SOC_CS42L56 @@ -774,6 +776,20 @@ config SND_SOC_CS42L42_SDW help Enable support for Cirrus Logic CS42L42 codec with Soundwire control
+config SND_SOC_CS42L43 + tristate "Cirrus Logic CS42L43 CODEC" + depends on MFD_CS42L43 && IRQ_CS42L43 + help + Select this to support the audio functions of the Cirrus Logic + CS42L43 PC CODEC. + +config SND_SOC_CS42L43_SDW + tristate "Cirrus Logic CS42L43 CODEC (SoundWire)" + depends on SND_SOC_CS42L43 && MFD_CS42L43_SDW + help + Select this to support the audio functions of the Cirrus Logic + CS42L43 PC CODEC over SoundWire. + config SND_SOC_CS42L51 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 5cdbae88e6e35..dd5905ebaf530 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -74,6 +74,8 @@ snd-soc-cs35l56-sdw-objs := cs35l56-sdw.o snd-soc-cs42l42-objs := cs42l42.o snd-soc-cs42l42-i2c-objs := cs42l42-i2c.o snd-soc-cs42l42-sdw-objs := cs42l42-sdw.o +snd-soc-cs42l43-objs := cs42l43.o cs42l43-jack.o +snd-soc-cs42l43-sdw-objs := cs42l43-sdw.o snd-soc-cs42l51-objs := cs42l51.o snd-soc-cs42l51-i2c-objs := cs42l51-i2c.o snd-soc-cs42l52-objs := cs42l52.o @@ -448,6 +450,8 @@ obj-$(CONFIG_SND_SOC_CS35L56_SDW) += snd-soc-cs35l56-sdw.o obj-$(CONFIG_SND_SOC_CS42L42_CORE) += snd-soc-cs42l42.o obj-$(CONFIG_SND_SOC_CS42L42) += snd-soc-cs42l42-i2c.o obj-$(CONFIG_SND_SOC_CS42L42_SDW) += snd-soc-cs42l42-sdw.o +obj-$(CONFIG_SND_SOC_CS42L43) += snd-soc-cs42l43.o +obj-$(CONFIG_SND_SOC_CS42L43_SDW) += snd-soc-cs42l43-sdw.o obj-$(CONFIG_SND_SOC_CS42L51) += snd-soc-cs42l51.o obj-$(CONFIG_SND_SOC_CS42L51_I2C) += snd-soc-cs42l51-i2c.o obj-$(CONFIG_SND_SOC_CS42L52) += snd-soc-cs42l52.o diff --git a/sound/soc/codecs/cs42l43-jack.c b/sound/soc/codecs/cs42l43-jack.c new file mode 100644 index 0000000000000..5b3e9f5987739 --- /dev/null +++ b/sound/soc/codecs/cs42l43-jack.c @@ -0,0 +1,946 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 CODEC driver jack handling +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/build_bug.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/pm_runtime.h> +#include <sound/control.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc-component.h> +#include <sound/soc.h> + +#include "cs42l43.h" + +static const unsigned int cs42l43_accdet_us[] = { + 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 +}; + +static const unsigned int cs42l43_accdet_db_ms[] = { + 0, 125, 250, 500, 750, 1000, 1250, 1500 +}; + +static const unsigned int cs42l43_accdet_ramp_ms[] = { 10, 40, 90, 170 }; + +static const unsigned int cs42l43_accdet_bias_sense[] = { + 14, 23, 41, 50, 60, 68, 86, 95, +}; + +static int cs42l43_find_index(unsigned int input, + const unsigned int *values, const int nvalues) +{ + int i; + + for (i = 0; i < nvalues; i++) + if (input == values[i]) + return i; + + return -EINVAL; +} + +static const struct cs42l43_jack_pdata cs42l43_default_jack_pdata = { + .detect_us = 10000, + .bias_ramp_ms = 170, + .tip = { + .pullup = true, + .fall_db_ms = 500, + .rise_db_ms = 500, + }, + .buttons = { + { .threshold = 70, .button = SND_JACK_BTN_0, }, + { .threshold = 185, .button = SND_JACK_BTN_3, }, + { .threshold = 355, .button = SND_JACK_BTN_1, }, + { .threshold = 735, .button = SND_JACK_BTN_2, }, + }, +}; + +int cs42l43_set_jack(struct snd_soc_component *component, + struct snd_soc_jack *jack, void *d) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + const struct cs42l43_jack_pdata *pdata = d; + /* This tip sense invert is always set, HW wants an inverted signal */ + unsigned int tip_deb = CS42L43_TIPSENSE_INV_MASK; + unsigned int hs2 = 0x2 << CS42L43_HSDET_MODE_SHIFT; + unsigned int autocontrol = 0, pdncntl = 0; + int ret; + + dev_dbg(priv->dev, "Configure accessory detect\n"); + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for jack config: %d\n", ret); + return ret; + } + + mutex_lock(&priv->jack_lock); + + priv->jack_hp = jack; + if (pdata) + priv->jack_pdata = *pdata; + else + priv->jack_pdata = cs42l43_default_jack_pdata; + pdata = &priv->jack_pdata; + + if (!jack) + goto done; + + ret = cs42l43_find_index(pdata->detect_us, cs42l43_accdet_us, + ARRAY_SIZE(cs42l43_accdet_us)); + if (ret < 0) { + dev_err(priv->dev, "Invalid accessory detect time: %u mS\n", + pdata->detect_us); + goto error; + } + + hs2 |= ret << CS42L43_AUTO_HSDET_TIME_SHIFT; + + ret = cs42l43_find_index(pdata->bias_ramp_ms, cs42l43_accdet_ramp_ms, + ARRAY_SIZE(cs42l43_accdet_ramp_ms)); + if (ret < 0) { + dev_err(priv->dev, "Invalid headset bias ramp time: %u mS\n", + pdata->bias_ramp_ms); + goto error; + } + + hs2 |= ret << CS42L43_HSBIAS_RAMP_SHIFT; + + if (pdata->tip.pullup) + autocontrol |= 0x3 << CS42L43_JACKDET_MODE_SHIFT; + else + autocontrol |= 0x1 << CS42L43_JACKDET_MODE_SHIFT; + + /* This tip sense invert is set normally, as TIPSENSE_INV already inverted */ + if (pdata->tip.invert) + autocontrol |= 0x1 << CS42L43_JACKDET_INV_SHIFT; + + if (!pdata->enable_button_automute) + autocontrol |= CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK; + + if (pdata->bias_sense_ua) { + ret = cs42l43_find_index(pdata->bias_sense_ua, + cs42l43_accdet_bias_sense, + ARRAY_SIZE(cs42l43_accdet_bias_sense)); + if (ret < 0) { + dev_err(priv->dev, + "Invalid headset bias sense trip current: %u uA\n", + pdata->bias_sense_ua); + goto error; + } + + autocontrol |= ret << CS42L43_HSBIAS_SENSE_TRIP_SHIFT; + } + + ret = cs42l43_find_index(pdata->tip.fall_db_ms, cs42l43_accdet_db_ms, + ARRAY_SIZE(cs42l43_accdet_db_ms)); + if (ret < 0) { + dev_err(priv->dev, "Invalid tip fall debounce time: %u mS\n", + pdata->tip.fall_db_ms); + goto error; + } + + tip_deb |= ret << CS42L43_TIPSENSE_FALLING_DB_TIME_SHIFT; + + ret = cs42l43_find_index(pdata->tip.rise_db_ms, cs42l43_accdet_db_ms, + ARRAY_SIZE(cs42l43_accdet_db_ms)); + if (ret < 0) { + dev_err(priv->dev, "Invalid tip rise debounce time: %u mS\n", + pdata->tip.rise_db_ms); + goto error; + } + + tip_deb |= ret << CS42L43_TIPSENSE_RISING_DB_TIME_SHIFT; + + if (pdata->use_ring_sense) { + unsigned int ring_deb = 0; + + /* HW wants an inverted signal, so invert the invert */ + if (!pdata->ring.invert) + ring_deb |= CS42L43_RINGSENSE_INV_MASK; + + if (pdata->ring.pullup) + ring_deb |= CS42L43_RINGSENSE_PULLUP_PDNB_MASK; + + ret = cs42l43_find_index(pdata->ring.fall_db_ms, cs42l43_accdet_db_ms, + ARRAY_SIZE(cs42l43_accdet_db_ms)); + if (ret < 0) { + dev_err(priv->dev, "Invalid ring fall debounce time: %u mS\n", + pdata->ring.fall_db_ms); + goto error; + } + + ring_deb |= ret << CS42L43_RINGSENSE_FALLING_DB_TIME_SHIFT; + + ret = cs42l43_find_index(pdata->ring.rise_db_ms, cs42l43_accdet_db_ms, + ARRAY_SIZE(cs42l43_accdet_db_ms)); + if (ret < 0) { + dev_err(priv->dev, "Invalid ring rise debounce time: %u mS\n", + pdata->ring.rise_db_ms); + goto error; + } + + ring_deb |= ret << CS42L43_RINGSENSE_RISING_DB_TIME_SHIFT; + pdncntl |= CS42L43_RING_SENSE_EN_MASK; + + regmap_update_bits(cs42l43->regmap, CS42L43_RINGSENSE_DEB_CTRL, + CS42L43_RINGSENSE_INV_MASK | + CS42L43_RINGSENSE_PULLUP_PDNB_MASK | + CS42L43_RINGSENSE_FALLING_DB_TIME_MASK | + CS42L43_RINGSENSE_RISING_DB_TIME_MASK, + ring_deb); + } + + regmap_update_bits(cs42l43->regmap, CS42L43_TIPSENSE_DEB_CTRL, + CS42L43_TIPSENSE_INV_MASK | + CS42L43_TIPSENSE_FALLING_DB_TIME_MASK | + CS42L43_TIPSENSE_RISING_DB_TIME_MASK, tip_deb); + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HSBIAS_RAMP_MASK | CS42L43_HSDET_MODE_MASK | + CS42L43_AUTO_HSDET_TIME_MASK, hs2); + +done: + ret = 0; + + regmap_update_bits(cs42l43->regmap, CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_JACKDET_MODE_MASK | CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK | + CS42L43_HSBIAS_SENSE_TRIP_MASK, autocontrol); + regmap_update_bits(cs42l43->regmap, CS42L43_PDNCNTL, + CS42L43_RING_SENSE_EN_MASK, pdncntl); + + dev_dbg(priv->dev, "Successfully configured accessory detect\n"); + +error: + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return ret; +} + +static void cs42l43_start_hs_bias(struct cs42l43_codec *priv, bool force_high) +{ + struct cs42l43 *cs42l43 = priv->core; + unsigned int val = 0x3 << CS42L43_HSBIAS_MODE_SHIFT; + + dev_dbg(priv->dev, "Start headset bias\n"); + + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HS_CLAMP_DISABLE_MASK, CS42L43_HS_CLAMP_DISABLE_MASK); + + if (!force_high && priv->jack_pdata.bias_low) + val = 0x2 << CS42L43_HSBIAS_MODE_SHIFT; + + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_HSBIAS_MODE_MASK, val); + + msleep(priv->jack_pdata.bias_ramp_ms); +} + +static void cs42l43_stop_hs_bias(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + dev_dbg(priv->dev, "Stop headset bias\n"); + + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_HSBIAS_MODE_MASK, 0x1 << CS42L43_HSBIAS_MODE_SHIFT); + + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HS_CLAMP_DISABLE_MASK, 0); +} + +#define CS42L43_JACK_PRESENT 0x3 +#define CS42L43_JACK_ABSENT 0x0 + +#define CS42L43_JACK_OPTICAL (SND_JACK_MECHANICAL | SND_JACK_AVOUT) +#define CS42L43_JACK_HEADPHONE (SND_JACK_MECHANICAL | SND_JACK_HEADPHONE) +#define CS42L43_JACK_HEADSET (SND_JACK_MECHANICAL | SND_JACK_HEADSET) +#define CS42L43_JACK_LINEOUT (SND_JACK_MECHANICAL | SND_JACK_LINEOUT) +#define CS42L43_JACK_LINEIN (SND_JACK_MECHANICAL | SND_JACK_LINEIN) +#define CS42L43_JACK_EXTENSION (SND_JACK_MECHANICAL) +#define CS42L43_JACK_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | \ + SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5) + +static inline bool cs42l43_jack_present(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + unsigned int sts = 0; + + regmap_read(cs42l43->regmap, CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS, &sts); + + sts = (sts >> CS42L43_TIPSENSE_PLUG_DB_STS_SHIFT) & CS42L43_JACK_PRESENT; + + return sts == CS42L43_JACK_PRESENT; +} + +static void cs42l43_start_button_detect(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + unsigned int val = 0x3 << CS42L43_BUTTON_DETECT_MODE_SHIFT; + + dev_dbg(priv->dev, "Start button detect\n"); + + priv->button_detect_running = true; + + if (priv->jack_pdata.bias_low) + val = 0x1 << CS42L43_BUTTON_DETECT_MODE_SHIFT; + + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_BUTTON_DETECT_MODE_MASK | + CS42L43_MIC_LVL_DET_DISABLE_MASK, val); + + if (priv->jack_pdata.bias_sense_ua) { + regmap_update_bits(cs42l43->regmap, + CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_HSBIAS_SENSE_EN_MASK | + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, + CS42L43_HSBIAS_SENSE_EN_MASK | + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK); + } +} + +static void cs42l43_stop_button_detect(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + dev_dbg(priv->dev, "Stop button detect\n"); + + if (priv->jack_pdata.bias_sense_ua) { + regmap_update_bits(cs42l43->regmap, + CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_HSBIAS_SENSE_EN_MASK | + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, 0); + } + + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_BUTTON_DETECT_MODE_MASK | + CS42L43_MIC_LVL_DET_DISABLE_MASK, + CS42L43_MIC_LVL_DET_DISABLE_MASK); + + priv->button_detect_running = false; +} + +#define CS42L43_BUTTON_COMB_US 11000 +#define CS42L43_BUTTON_COMB_MAX 512 +#define CS42L43_BUTTON_ROUT 2210 + +irqreturn_t cs42l43_button_press(int irq, void *data) +{ + struct cs42l43_codec *priv = data; + struct cs42l43 *cs42l43 = priv->core; + struct cs42l43_jack_pdata *pdata = &priv->jack_pdata; + irqreturn_t iret = IRQ_NONE; + unsigned int buttons = 0; + unsigned int val = 0; + int i, ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for button press: %d\n", ret); + return ret; + } + + mutex_lock(&priv->jack_lock); + + if (!priv->button_detect_running) { + dev_dbg(priv->dev, "Spurious button press IRQ\n"); + goto error; + } + + /* + * Wait for 2 full cycles of comb filter to ensure good reading. + * A fairly tight range is needed as we don't want to miss the button. + */ + usleep_range(2 * CS42L43_BUTTON_COMB_US, 2 * CS42L43_BUTTON_COMB_US + 50); + + regmap_read(cs42l43->regmap, CS42L43_DETECT_STATUS_1, &val); + + /* Bail if jack removed, the button is irrelevant and likely invalid */ + if (!cs42l43_jack_present(priv)) { + dev_dbg(priv->dev, "Button ignored due to removal\n"); + goto error; + } + + if (val & CS42L43_HSBIAS_CLAMP_STS_MASK) { + dev_dbg(priv->dev, "Button ignored due to bias sense\n"); + queue_delayed_work(system_long_wq, &priv->bias_sense_timeout, + msecs_to_jiffies(250)); + goto error; + } + + val = (val & CS42L43_HSDET_DC_STS_MASK) >> CS42L43_HSDET_DC_STS_SHIFT; + val = ((CS42L43_BUTTON_COMB_MAX << 20) / (val + 1)) - (1 << 20); + if (val) + val = (CS42L43_BUTTON_ROUT << 20) / val; + else + val = UINT_MAX; + + for (i = 0; i < CS42L43_N_BUTTONS; i++) { + if (val < pdata->buttons[i].threshold) { + buttons = pdata->buttons[i].button; + dev_dbg(priv->dev, "Detected button %d at %d Ohms\n", i, val); + break; + } + } + + if (!buttons) + dev_dbg(priv->dev, "Unrecognised button: %d ohms\n", val); + + snd_soc_jack_report(priv->jack_hp, buttons, CS42L43_JACK_BUTTONS); + + iret = IRQ_HANDLED; + +error: + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return iret; +} + +irqreturn_t cs42l43_button_release(int irq, void *data) +{ + struct cs42l43_codec *priv = data; + irqreturn_t iret = IRQ_NONE; + int ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for button release: %d\n", ret); + return ret; + } + + mutex_lock(&priv->jack_lock); + + if (priv->button_detect_running) { + dev_dbg(priv->dev, "Button release IRQ\n"); + + snd_soc_jack_report(priv->jack_hp, 0, CS42L43_JACK_BUTTONS); + + iret = IRQ_HANDLED; + } else { + dev_dbg(priv->dev, "Spurious button release IRQ\n"); + } + + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return iret; +} + +void cs42l43_bias_sense_timeout(struct work_struct *work) +{ + struct cs42l43_codec *priv = container_of(work, struct cs42l43_codec, + bias_sense_timeout.work); + struct cs42l43 *cs42l43 = priv->core; + int ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for bias sense: %d\n", ret); + return; + } + + mutex_lock(&priv->jack_lock); + + if (cs42l43_jack_present(priv) && priv->button_detect_running) { + dev_dbg(priv->dev, "Bias sense timeout out, restore bias\n"); + + regmap_update_bits(cs42l43->regmap, + CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, + CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK); + } + + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); +} + +static void cs42l43_start_load_detect(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + dev_dbg(priv->dev, "Start load detect\n"); + + snd_soc_dapm_mutex_lock(snd_soc_component_get_dapm(priv->component)); + + priv->load_detect_running = true; + + if (priv->hp_ena) { + unsigned long time_left; + + reinit_completion(&priv->hp_shutdown); + + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN8, + CS42L43_HP_EN_MASK, 0); + + time_left = wait_for_completion_timeout(&priv->hp_shutdown, + msecs_to_jiffies(CS42L43_HP_TIMEOUT_MS)); + if (!time_left) + dev_err(priv->dev, "Load detect HP power down timed out\n"); + } + + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN3, + CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_DACCNFG2, CS42L43_HP_HPF_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_HSBIAS_MODE_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL, + CS42L43_ADPTPWR_MODE_MASK, 0x4 << CS42L43_ADPTPWR_MODE_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_PGAVOL, + CS42L43_HP_DIG_VOL_RAMP_MASK | CS42L43_HP_ANA_VOL_RAMP_MASK, 0x6); + regmap_update_bits(cs42l43->regmap, CS42L43_DACCNFG1, + CS42L43_HP_MSTR_VOL_CTRL_EN_MASK, 0); + + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HS_CLAMP_DISABLE_MASK, CS42L43_HS_CLAMP_DISABLE_MASK); + + regmap_update_bits(cs42l43->regmap, CS42L43_LOADDETENA, + CS42L43_HPLOAD_DET_EN_MASK, + CS42L43_HPLOAD_DET_EN_MASK); + + snd_soc_dapm_mutex_unlock(snd_soc_component_get_dapm(priv->component)); +} + +static void cs42l43_stop_load_detect(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + dev_dbg(priv->dev, "Stop load detect\n"); + + snd_soc_dapm_mutex_lock(snd_soc_component_get_dapm(priv->component)); + + regmap_update_bits(cs42l43->regmap, CS42L43_LOADDETENA, + CS42L43_HPLOAD_DET_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HS_CLAMP_DISABLE_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_DACCNFG1, + CS42L43_HP_MSTR_VOL_CTRL_EN_MASK, + CS42L43_HP_MSTR_VOL_CTRL_EN_MASK); + regmap_update_bits(cs42l43->regmap, CS42L43_PGAVOL, + CS42L43_HP_DIG_VOL_RAMP_MASK | CS42L43_HP_ANA_VOL_RAMP_MASK, + 0x4 << CS42L43_HP_DIG_VOL_RAMP_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL, + CS42L43_ADPTPWR_MODE_MASK, 0x7 << CS42L43_ADPTPWR_MODE_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, + CS42L43_HSBIAS_MODE_MASK, 0x1 << CS42L43_HSBIAS_MODE_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_DACCNFG2, + CS42L43_HP_HPF_EN_MASK, CS42L43_HP_HPF_EN_MASK); + + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN3, + CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK, + priv->adc_ena); + + if (priv->hp_ena) { + unsigned long time_left; + + reinit_completion(&priv->hp_startup); + + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN8, + CS42L43_HP_EN_MASK, priv->hp_ena); + + time_left = wait_for_completion_timeout(&priv->hp_startup, + msecs_to_jiffies(CS42L43_HP_TIMEOUT_MS)); + if (!time_left) + dev_err(priv->dev, "Load detect HP restore timed out\n"); + } + + priv->load_detect_running = false; + + snd_soc_dapm_mutex_unlock(snd_soc_component_get_dapm(priv->component)); +} + +static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic) +{ + struct cs42l43 *cs42l43 = priv->core; + unsigned int val = 0; + unsigned long time_left; + + reinit_completion(&priv->load_detect); + + cs42l43_start_load_detect(priv); + time_left = wait_for_completion_timeout(&priv->load_detect, + msecs_to_jiffies(CS42L43_LOAD_TIMEOUT_MS)); + cs42l43_stop_load_detect(priv); + + if (!time_left) + return -ETIMEDOUT; + + regmap_read(cs42l43->regmap, CS42L43_LOADDETRESULTS, &val); + + dev_dbg(priv->dev, "Headphone load detect: 0x%x\n", val); + + /* Bail if jack removed, the load is irrelevant and likely invalid */ + if (!cs42l43_jack_present(priv)) + return -ENODEV; + + if (mic) { + cs42l43_start_hs_bias(priv, false); + cs42l43_start_button_detect(priv); + + return CS42L43_JACK_HEADSET; + } + + switch (val & CS42L43_AMP3_RES_DET_MASK) { + case 0x0: // low impedance + case 0x1: // high impedance + return CS42L43_JACK_HEADPHONE; + case 0x2: // lineout + case 0x3: // Open circuit + return CS42L43_JACK_LINEOUT; + default: + return -EINVAL; + } +} + +static int cs42l43_run_type_detect(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + int timeout_ms = ((2 * priv->jack_pdata.detect_us) / 1000) + 200; + unsigned int type = 0xff; + unsigned long time_left; + + reinit_completion(&priv->type_detect); + + cs42l43_start_hs_bias(priv, true); + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HSDET_MODE_MASK, 0x3 << CS42L43_HSDET_MODE_SHIFT); + + time_left = wait_for_completion_timeout(&priv->type_detect, + msecs_to_jiffies(timeout_ms)); + + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HSDET_MODE_MASK, 0x2 << CS42L43_HSDET_MODE_SHIFT); + cs42l43_stop_hs_bias(priv); + + if (!time_left) + return -ETIMEDOUT; + + regmap_read(cs42l43->regmap, CS42L43_HS_STAT, &type); + + dev_dbg(priv->dev, "Type detect: 0x%x\n", type); + + /* Bail if jack removed, the type is irrelevant and likely invalid */ + if (!cs42l43_jack_present(priv)) + return -ENODEV; + + switch (type & CS42L43_HSDET_TYPE_STS_MASK) { + case 0x0: // CTIA + case 0x1: // OMTP + return cs42l43_run_load_detect(priv, true); + case 0x2: // 3-pole + return cs42l43_run_load_detect(priv, false); + case 0x3: // Open-circuit + return CS42L43_JACK_EXTENSION; + default: + return -EINVAL; + } +} + +void cs42l43_tip_sense_work(struct work_struct *work) +{ + struct cs42l43_codec *priv = container_of(work, struct cs42l43_codec, + tip_sense_work.work); + struct cs42l43 *cs42l43 = priv->core; + struct cs42l43_jack_pdata *pdata = &priv->jack_pdata; + unsigned int sts = 0; + unsigned int tip, ring; + int ret, report; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for tip work: %d\n", ret); + return; + } + + mutex_lock(&priv->jack_lock); + + regmap_read(cs42l43->regmap, CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS, &sts); + + dev_dbg(priv->dev, "Tip sense: 0x%x\n", sts); + + tip = (sts >> CS42L43_TIPSENSE_PLUG_DB_STS_SHIFT) & CS42L43_JACK_PRESENT; + ring = (sts >> CS42L43_RINGSENSE_PLUG_DB_STS_SHIFT) & CS42L43_JACK_PRESENT; + + if (tip == CS42L43_JACK_PRESENT) { + if (pdata->use_ring_sense && ring == CS42L43_JACK_ABSENT) { + report = CS42L43_JACK_OPTICAL; + } else { + report = cs42l43_run_type_detect(priv); + if (report < 0) { + dev_err(priv->dev, "Jack detect failed: %d\n", report); + goto error; + } + } + + snd_soc_jack_report(priv->jack_hp, report, report); + } + +error: + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); +} + +static void cs42l43_clear_jack(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + cs42l43_stop_button_detect(priv); + cs42l43_stop_hs_bias(priv); + + regmap_update_bits(cs42l43->regmap, CS42L43_ADC_B_CTRL1, + CS42L43_PGA_WIDESWING_MODE_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_ADC_B_CTRL2, + CS42L43_PGA_WIDESWING_MODE_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_STEREO_MIC_CTRL, + CS42L43_JACK_STEREO_CONFIG_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HSDET_MODE_MASK | CS42L43_HSDET_MANUAL_MODE_MASK, + 0x2 << CS42L43_HSDET_MODE_SHIFT); + + snd_soc_jack_report(priv->jack_hp, 0, 0xFFFF); +} + +irqreturn_t cs42l43_tip_sense(int irq, void *data) +{ + struct cs42l43_codec *priv = data; + struct cs42l43 *cs42l43 = priv->core; + int ret; + + cancel_delayed_work_sync(&priv->bias_sense_timeout); + cancel_delayed_work_sync(&priv->tip_sense_work); + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for tip sense: %d\n", ret); + return ret; + } + + mutex_lock(&priv->jack_lock); + + if (cs42l43_jack_present(priv)) { + dev_dbg(priv->dev, "Jack insert\n"); + + if (cs42l43->sdw && !priv->jack_present) { + priv->jack_present = true; + pm_runtime_get(priv->dev); + } + + queue_delayed_work(system_long_wq, &priv->tip_sense_work, + msecs_to_jiffies(priv->jack_pdata.tip_debounce_ms)); + } else { + dev_dbg(priv->dev, "Jack removal\n"); + + priv->jack_override = 0; + + cs42l43_clear_jack(priv); + + if (cs42l43->sdw && priv->jack_present) { + pm_runtime_put(priv->dev); + priv->jack_present = false; + } + } + + mutex_unlock(&priv->jack_lock); + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return IRQ_HANDLED; +} + +enum cs42l43_raw_jack { + CS42L43_JACK_RAW_CTIA = 0, + CS42L43_JACK_RAW_OMTP, + CS42L43_JACK_RAW_HEADPHONE, + CS42L43_JACK_RAW_LINE_OUT, + CS42L43_JACK_RAW_LINE_IN, + CS42L43_JACK_RAW_MICROPHONE, + CS42L43_JACK_RAW_OPTICAL, +}; + +#define CS42L43_JACK_3_POLE_SWITCHES ((0x2 << CS42L43_HSDET_MANUAL_MODE_SHIFT) | \ + CS42L43_AMP3_4_GNDREF_HS3_SEL_MASK | \ + CS42L43_AMP3_4_GNDREF_HS4_SEL_MASK | \ + CS42L43_HSBIAS_GNDREF_HS3_SEL_MASK | \ + CS42L43_HSBIAS_GNDREF_HS4_SEL_MASK | \ + CS42L43_HSGND_HS3_SEL_MASK | \ + CS42L43_HSGND_HS4_SEL_MASK) + +static const struct cs42l43_jack_override_mode { + unsigned int hsdet_mode; + unsigned int mic_ctrl; + unsigned int clamp_ctrl; + int report; +} cs42l43_jack_override_modes[] = { + [CS42L43_JACK_RAW_CTIA] = { + .hsdet_mode = CS42L43_AMP3_4_GNDREF_HS3_SEL_MASK | + CS42L43_HSBIAS_GNDREF_HS3_SEL_MASK | + CS42L43_HSBIAS_OUT_HS4_SEL_MASK | + CS42L43_HSGND_HS3_SEL_MASK, + .clamp_ctrl = CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + .report = CS42L43_JACK_HEADSET, + }, + [CS42L43_JACK_RAW_OMTP] = { + .hsdet_mode = (0x1 << CS42L43_HSDET_MANUAL_MODE_SHIFT) | + CS42L43_AMP3_4_GNDREF_HS4_SEL_MASK | + CS42L43_HSBIAS_GNDREF_HS4_SEL_MASK | + CS42L43_HSBIAS_OUT_HS3_SEL_MASK | + CS42L43_HSGND_HS4_SEL_MASK, + .clamp_ctrl = CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + .report = CS42L43_JACK_HEADSET, + }, + [CS42L43_JACK_RAW_HEADPHONE] = { + .hsdet_mode = CS42L43_JACK_3_POLE_SWITCHES, + .clamp_ctrl = CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + .report = CS42L43_JACK_HEADPHONE, + }, + [CS42L43_JACK_RAW_LINE_OUT] = { + .hsdet_mode = CS42L43_JACK_3_POLE_SWITCHES, + .clamp_ctrl = CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + .report = CS42L43_JACK_LINEOUT, + }, + [CS42L43_JACK_RAW_LINE_IN] = { + .hsdet_mode = CS42L43_JACK_3_POLE_SWITCHES, + .mic_ctrl = 0x2 << CS42L43_JACK_STEREO_CONFIG_SHIFT, + .report = CS42L43_JACK_LINEIN, + }, + [CS42L43_JACK_RAW_MICROPHONE] = { + .hsdet_mode = CS42L43_JACK_3_POLE_SWITCHES, + .mic_ctrl = (0x3 << CS42L43_JACK_STEREO_CONFIG_SHIFT) | + CS42L43_HS1_BIAS_EN_MASK | CS42L43_HS2_BIAS_EN_MASK, + .report = CS42L43_JACK_LINEIN, + }, + [CS42L43_JACK_RAW_OPTICAL] = { + .hsdet_mode = CS42L43_JACK_3_POLE_SWITCHES, + .clamp_ctrl = CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + .report = CS42L43_JACK_OPTICAL, + }, +}; + +static const char * const cs42l43_jack_text[] = { + "None", "CTIA", "OMTP", "Headphone", "Line-Out", + "Line-In", "Microphone", "Optical", +}; + +SOC_ENUM_SINGLE_VIRT_DECL(cs42l43_jack_enum, cs42l43_jack_text); + +int cs42l43_jack_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + mutex_lock(&priv->jack_lock); + ucontrol->value.integer.value[0] = priv->jack_override; + mutex_unlock(&priv->jack_lock); + + return 0; +} + +int cs42l43_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned int override = ucontrol->value.integer.value[0]; + + BUILD_BUG_ON(ARRAY_SIZE(cs42l43_jack_override_modes) != + ARRAY_SIZE(cs42l43_jack_text) - 1); + + if (override >= e->items) + return -EINVAL; + + mutex_lock(&priv->jack_lock); + + if (!cs42l43_jack_present(priv)) { + mutex_unlock(&priv->jack_lock); + return -EBUSY; + } + + if (override == priv->jack_override) { + mutex_unlock(&priv->jack_lock); + return 0; + } + + priv->jack_override = override; + + cs42l43_clear_jack(priv); + + if (!override) { + queue_delayed_work(system_long_wq, &priv->tip_sense_work, 0); + } else { + override--; + + regmap_update_bits(cs42l43->regmap, CS42L43_HS2, + CS42L43_HSDET_MODE_MASK | + CS42L43_HSDET_MANUAL_MODE_MASK | + CS42L43_AMP3_4_GNDREF_HS3_SEL_MASK | + CS42L43_AMP3_4_GNDREF_HS4_SEL_MASK | + CS42L43_HSBIAS_GNDREF_HS3_SEL_MASK | + CS42L43_HSBIAS_GNDREF_HS4_SEL_MASK | + CS42L43_HSBIAS_OUT_HS3_SEL_MASK | + CS42L43_HSBIAS_OUT_HS4_SEL_MASK | + CS42L43_HSGND_HS3_SEL_MASK | + CS42L43_HSGND_HS4_SEL_MASK, + cs42l43_jack_override_modes[override].hsdet_mode); + regmap_update_bits(cs42l43->regmap, CS42L43_STEREO_MIC_CTRL, + CS42L43_HS2_BIAS_EN_MASK | CS42L43_HS1_BIAS_EN_MASK | + CS42L43_JACK_STEREO_CONFIG_MASK, + cs42l43_jack_override_modes[override].mic_ctrl); + regmap_update_bits(cs42l43->regmap, CS42L43_STEREO_MIC_CLAMP_CTRL, + CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK, + cs42l43_jack_override_modes[override].clamp_ctrl); + + switch (override) { + case CS42L43_JACK_RAW_CTIA: + case CS42L43_JACK_RAW_OMTP: + cs42l43_start_hs_bias(priv, false); + cs42l43_start_button_detect(priv); + break; + case CS42L43_JACK_RAW_LINE_IN: + regmap_update_bits(cs42l43->regmap, CS42L43_ADC_B_CTRL1, + CS42L43_PGA_WIDESWING_MODE_EN_MASK, + CS42L43_PGA_WIDESWING_MODE_EN_MASK); + regmap_update_bits(cs42l43->regmap, CS42L43_ADC_B_CTRL2, + CS42L43_PGA_WIDESWING_MODE_EN_MASK, + CS42L43_PGA_WIDESWING_MODE_EN_MASK); + break; + case CS42L43_JACK_RAW_MICROPHONE: + cs42l43_start_hs_bias(priv, false); + break; + default: + break; + } + + snd_soc_jack_report(priv->jack_hp, + cs42l43_jack_override_modes[override].report, + cs42l43_jack_override_modes[override].report); + } + + mutex_unlock(&priv->jack_lock); + + return 1; +} diff --git a/sound/soc/codecs/cs42l43-sdw.c b/sound/soc/codecs/cs42l43-sdw.c new file mode 100644 index 0000000000000..3d81a0536c534 --- /dev/null +++ b/sound/soc/codecs/cs42l43-sdw.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 CODEC driver SoundWire handling +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/errno.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <sound/pcm.h> +#include <sound/sdw.h> +#include <sound/soc-component.h> +#include <sound/soc-dai.h> +#include <sound/soc.h> + +#include "cs42l43.h" + +int cs42l43_sdw_add_peripheral(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(dai->component); + struct sdw_stream_runtime *sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + struct sdw_slave *sdw = dev_to_sdw_dev(priv->dev->parent); + struct sdw_stream_config sconfig = {0}; + struct sdw_port_config pconfig = {0}; + int ret; + + if (!sdw_stream) + return -EINVAL; + + snd_sdw_params_to_config(substream, params, &sconfig, &pconfig); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + pconfig.num = 5; + else + pconfig.num = 1; + + ret = sdw_stream_add_slave(sdw, &sconfig, &pconfig, 1, sdw_stream); + if (ret) { + dev_err(priv->dev, "Failed to add sdw stream: %d\n", ret); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(cs42l43_sdw_add_peripheral, SND_SOC_CS42L43); + +int cs42l43_sdw_remove_peripheral(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(dai->component); + struct sdw_stream_runtime *sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + struct sdw_slave *sdw = dev_to_sdw_dev(priv->dev->parent); + + if (!sdw_stream) + return -EINVAL; + + return sdw_stream_remove_slave(sdw, sdw_stream); +} +EXPORT_SYMBOL_NS_GPL(cs42l43_sdw_remove_peripheral, SND_SOC_CS42L43); + +int cs42l43_sdw_set_stream(struct snd_soc_dai *dai, void *sdw_stream, int direction) +{ + if (sdw_stream) + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(cs42l43_sdw_set_stream, SND_SOC_CS42L43); + +MODULE_DESCRIPTION("CS42L43 CODEC SoundWire Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c new file mode 100644 index 0000000000000..cb7cd6bb6e954 --- /dev/null +++ b/sound/soc/codecs/cs42l43.c @@ -0,0 +1,2270 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// CS42L43 CODEC driver +// +// Copyright (C) 2022-2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/gcd.h> +#include <linux/irq.h> +#include <linux/irqchip/cs42l43.h> +#include <linux/jiffies.h> +#include <linux/mfd/cs42l43.h> +#include <linux/mfd/cs42l43-regs.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/string.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc-component.h> +#include <sound/soc-dapm.h> +#include <sound/soc-dai.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "cs42l43.h" + +#define CS42L43_DECL_MUX(name, reg) \ +static SOC_VALUE_ENUM_SINGLE_DECL(cs42l43_##name##_enum, reg, \ + 0, CS42L43_MIXER_SRC_MASK, \ + cs42l43_mixer_texts, cs42l43_mixer_values); \ +static const struct snd_kcontrol_new cs42l43_##name##_mux = \ + SOC_DAPM_ENUM("Route", cs42l43_##name##_enum) + +#define CS42L43_DECL_MIXER(name, reg) \ + CS42L43_DECL_MUX(name##_in1, reg); \ + CS42L43_DECL_MUX(name##_in2, reg + 0x4); \ + CS42L43_DECL_MUX(name##_in3, reg + 0x8); \ + CS42L43_DECL_MUX(name##_in4, reg + 0xC) + +#define CS42L43_DAPM_MUX(name_str, name) \ + SND_SOC_DAPM_MUX(name_str " Input", SND_SOC_NOPM, 0, 0, &cs42l43_##name##_mux) + +#define CS42L43_DAPM_MIXER(name_str, name) \ + SND_SOC_DAPM_MUX(name_str " Input 1", SND_SOC_NOPM, 0, 0, &cs42l43_##name##_in1_mux), \ + SND_SOC_DAPM_MUX(name_str " Input 2", SND_SOC_NOPM, 0, 0, &cs42l43_##name##_in2_mux), \ + SND_SOC_DAPM_MUX(name_str " Input 3", SND_SOC_NOPM, 0, 0, &cs42l43_##name##_in3_mux), \ + SND_SOC_DAPM_MUX(name_str " Input 4", SND_SOC_NOPM, 0, 0, &cs42l43_##name##_in4_mux), \ + SND_SOC_DAPM_MIXER(name_str " Mixer", SND_SOC_NOPM, 0, 0, NULL, 0) + +#define CS42L43_BASE_ROUTES(name_str) \ + { name_str, "Tone Generator 1", "Tone 1" }, \ + { name_str, "Tone Generator 2", "Tone 2" }, \ + { name_str, "Decimator 1", "Decimator 1" }, \ + { name_str, "Decimator 2", "Decimator 2" }, \ + { name_str, "Decimator 3", "Decimator 3" }, \ + { name_str, "Decimator 4", "Decimator 4" }, \ + { name_str, "ASPRX1", "ASPRX1" }, \ + { name_str, "ASPRX2", "ASPRX2" }, \ + { name_str, "ASPRX3", "ASPRX3" }, \ + { name_str, "ASPRX4", "ASPRX4" }, \ + { name_str, "ASPRX5", "ASPRX5" }, \ + { name_str, "ASPRX6", "ASPRX6" }, \ + { name_str, "DP5RX1", "DP5RX1" }, \ + { name_str, "DP5RX2", "DP5RX2" }, \ + { name_str, "DP6RX1", "DP6RX1" }, \ + { name_str, "DP6RX2", "DP6RX2" }, \ + { name_str, "DP7RX1", "DP7RX1" }, \ + { name_str, "DP7RX2", "DP7RX2" }, \ + { name_str, "ASRC INT1", "ASRC_INT1" }, \ + { name_str, "ASRC INT2", "ASRC_INT2" }, \ + { name_str, "ASRC INT3", "ASRC_INT3" }, \ + { name_str, "ASRC INT4", "ASRC_INT4" }, \ + { name_str, "ASRC DEC1", "ASRC_DEC1" }, \ + { name_str, "ASRC DEC2", "ASRC_DEC2" }, \ + { name_str, "ASRC DEC3", "ASRC_DEC3" }, \ + { name_str, "ASRC DEC4", "ASRC_DEC4" }, \ + { name_str, "ISRC1 INT1", "ISRC1INT1" }, \ + { name_str, "ISRC1 INT2", "ISRC1INT2" }, \ + { name_str, "ISRC1 DEC1", "ISRC1DEC1" }, \ + { name_str, "ISRC1 DEC2", "ISRC1DEC2" }, \ + { name_str, "ISRC2 INT1", "ISRC2INT1" }, \ + { name_str, "ISRC2 INT2", "ISRC2INT2" }, \ + { name_str, "ISRC2 DEC1", "ISRC2DEC1" }, \ + { name_str, "ISRC2 DEC2", "ISRC2DEC2" }, \ + { name_str, "EQ1", "EQ" }, \ + { name_str, "EQ2", "EQ" } + +#define CS42L43_MUX_ROUTES(name_str, widget) \ + { widget, NULL, name_str " Input" }, \ + { name_str " Input", NULL, "Mixer Core" }, \ + CS42L43_BASE_ROUTES(name_str " Input") + +#define CS42L43_MIXER_ROUTES(name_str, widget) \ + { name_str " Mixer", NULL, name_str " Input 1" }, \ + { name_str " Mixer", NULL, name_str " Input 2" }, \ + { name_str " Mixer", NULL, name_str " Input 3" }, \ + { name_str " Mixer", NULL, name_str " Input 4" }, \ + { widget, NULL, name_str " Mixer" }, \ + { name_str " Mixer", NULL, "Mixer Core" }, \ + CS42L43_BASE_ROUTES(name_str " Input 1"), \ + CS42L43_BASE_ROUTES(name_str " Input 2"), \ + CS42L43_BASE_ROUTES(name_str " Input 3"), \ + CS42L43_BASE_ROUTES(name_str " Input 4") + +#define CS42L43_MIXER_VOLUMES(name_str, base) \ + SOC_SINGLE_RANGE_TLV(name_str " Input 1 Volume", base, \ + CS42L43_MIXER_VOL_SHIFT, 0x20, 0x50, 0, \ + cs42l43_mixer_tlv), \ + SOC_SINGLE_RANGE_TLV(name_str " Input 2 Volume", base + 4, \ + CS42L43_MIXER_VOL_SHIFT, 0x20, 0x50, 0, \ + cs42l43_mixer_tlv), \ + SOC_SINGLE_RANGE_TLV(name_str " Input 3 Volume", base + 8, \ + CS42L43_MIXER_VOL_SHIFT, 0x20, 0x50, 0, \ + cs42l43_mixer_tlv), \ + SOC_SINGLE_RANGE_TLV(name_str " Input 4 Volume", base + 12, \ + CS42L43_MIXER_VOL_SHIFT, 0x20, 0x50, 0, \ + cs42l43_mixer_tlv) + +#define CS42L43_IRQ_ERROR(name) \ +static irqreturn_t cs42l43_##name(int irq, void *data) \ +{ \ + struct cs42l43_codec *priv = data; \ + dev_err(priv->dev, "Error " #name " IRQ\n"); \ + return IRQ_HANDLED; \ +} + +CS42L43_IRQ_ERROR(pll_lost_lock) +CS42L43_IRQ_ERROR(spkr_clock_stop) +CS42L43_IRQ_ERROR(spkl_clock_stop) +CS42L43_IRQ_ERROR(spkr_brown_out) +CS42L43_IRQ_ERROR(spkl_brown_out) +CS42L43_IRQ_ERROR(spkr_therm_shutdown) +CS42L43_IRQ_ERROR(spkl_therm_shutdown) +CS42L43_IRQ_ERROR(spkr_therm_warm) +CS42L43_IRQ_ERROR(spkl_therm_warm) +CS42L43_IRQ_ERROR(spkr_sc_detect) +CS42L43_IRQ_ERROR(spkl_sc_detect) +CS42L43_IRQ_ERROR(hp_ilimit) + +#define CS42L43_IRQ_COMPLETE(name) \ +static irqreturn_t cs42l43_##name(int irq, void *data) \ +{ \ + struct cs42l43_codec *priv = data; \ + dev_dbg(priv->dev, #name " completed\n"); \ + complete(&priv->name); \ + return IRQ_HANDLED; \ +} + +CS42L43_IRQ_COMPLETE(pll_ready) +CS42L43_IRQ_COMPLETE(hp_startup) +CS42L43_IRQ_COMPLETE(hp_shutdown) +CS42L43_IRQ_COMPLETE(type_detect) +CS42L43_IRQ_COMPLETE(spkr_shutdown) +CS42L43_IRQ_COMPLETE(spkl_shutdown) +CS42L43_IRQ_COMPLETE(spkr_startup) +CS42L43_IRQ_COMPLETE(spkl_startup) +CS42L43_IRQ_COMPLETE(load_detect) + +static irqreturn_t cs42l43_mic_shutter(int irq, void *data) +{ + struct cs42l43_codec *priv = data; + const char * const controls[] = { + "Decimator 1 Switch", + "Decimator 2 Switch", + "Decimator 3 Switch", + "Decimator 4 Switch", + }; + int i, ret; + + dev_dbg(priv->dev, "Microphone shutter changed\n"); + + if (!priv->component) + return IRQ_NONE; + + for (i = 0; i < ARRAY_SIZE(controls); i++) { + ret = snd_soc_component_notify_control(priv->component, + controls[i]); + if (ret) + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static irqreturn_t cs42l43_spk_shutter(int irq, void *data) +{ + struct cs42l43_codec *priv = data; + int ret; + + dev_dbg(priv->dev, "Speaker shutter changed\n"); + + if (!priv->component) + return IRQ_NONE; + + ret = snd_soc_component_notify_control(priv->component, + "Speaker Digital Switch"); + if (ret) + return IRQ_NONE; + + return IRQ_HANDLED; +} + +static const unsigned int cs42l43_sample_rates[] = { + 8000, 16000, 24000, 32000, 44100, 48000, 96000, 192000, +}; + +#define CS42L43_CONSUMER_RATE_MASK 0xFF +#define CS42L43_PROVIDER_RATE_MASK 0xEF // 44.1k only supported as consumer + +static const struct snd_pcm_hw_constraint_list cs42l43_constraint = { + .count = ARRAY_SIZE(cs42l43_sample_rates), + .list = cs42l43_sample_rates, +}; + +static int cs42l43_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + int provider = !!regmap_test_bits(cs42l43->regmap, CS42L43_ASP_CLK_CONFIG2, + CS42L43_ASP_MASTER_MODE_MASK); + + if (provider) + priv->constraint.mask = CS42L43_PROVIDER_RATE_MASK; + else + priv->constraint.mask = CS42L43_CONSUMER_RATE_MASK; + + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &priv->constraint); +} + +static int cs42l43_convert_sample_rate(unsigned int rate) +{ + switch (rate) { + case 8000: + return 0x11; + case 16000: + return 0x12; + case 24000: + return 0x02; + case 32000: + return 0x13; + case 44100: + return 0x0B; + case 48000: + return 0x03; + case 96000: + return 0x04; + case 192000: + return 0x05; + default: + return -EINVAL; + } +} + +static int cs42l43_set_sample_rate(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(dai->component); + struct cs42l43 *cs42l43 = priv->core; + int ret; + + ret = cs42l43_convert_sample_rate(params_rate(params)); + if (ret < 0) { + dev_err(priv->dev, "Failed to convert sample rate: %d\n", ret); + return ret; + } + + //FIXME: For now lets just set sample rate 1, this needs expanded in the future + regmap_update_bits(cs42l43->regmap, CS42L43_SAMPLE_RATE1, + CS42L43_SAMPLE_RATE_MASK, ret); + + return 0; +} + +static int cs42l43_asp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(dai->component); + struct cs42l43 *cs42l43 = priv->core; + int dsp_mode = !!regmap_test_bits(cs42l43->regmap, CS42L43_ASP_CTRL, + CS42L43_ASP_FSYNC_MODE_MASK); + int provider = !!regmap_test_bits(cs42l43->regmap, CS42L43_ASP_CLK_CONFIG2, + CS42L43_ASP_MASTER_MODE_MASK); + int n_chans = params_channels(params); + int data_width = params_width(params); + int n_slots = n_chans; + int slot_width = data_width; + int frame, bclk_target, i; + unsigned int reg; + int *slots; + + if (priv->n_slots) { + n_slots = priv->n_slots; + slot_width = priv->slot_width; + } + + if (!dsp_mode && (n_slots & 0x1)) { + dev_dbg(priv->dev, "Forcing balanced channels on ASP\n"); + n_slots++; + } + + frame = n_slots * slot_width; + bclk_target = params_rate(params) * frame; + + if (provider) { + unsigned int gcd_nm = gcd(bclk_target, CS42L43_INTERNAL_SYSCLK); + int n = bclk_target / gcd_nm; + int m = CS42L43_INTERNAL_SYSCLK / gcd_nm; + + if (n > (CS42L43_ASP_BCLK_N_MASK >> CS42L43_ASP_BCLK_N_SHIFT) || + m > CS42L43_ASP_BCLK_M_MASK) { + dev_err(priv->dev, "Can't produce %dHz bclk\n", bclk_target); + return -EINVAL; + } + + dev_dbg(priv->dev, "bclk %d/%d = %dHz, with %dx%d frame\n", + n, m, bclk_target, n_slots, slot_width); + + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_CLK_CONFIG1, + CS42L43_ASP_BCLK_N_MASK | CS42L43_ASP_BCLK_M_MASK, + n << CS42L43_ASP_BCLK_N_SHIFT | + m << CS42L43_ASP_BCLK_M_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_FSYNC_CTRL1, + CS42L43_ASP_FSYNC_M_MASK, frame); + } + + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_FSYNC_CTRL4, + CS42L43_ASP_NUM_BCLKS_PER_FSYNC_MASK, + frame << CS42L43_ASP_NUM_BCLKS_PER_FSYNC_SHIFT); + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { + reg = CS42L43_ASP_TX_CH1_CTRL; + slots = priv->tx_slots; + } else { + reg = CS42L43_ASP_RX_CH1_CTRL; + slots = priv->rx_slots; + } + + for (i = 0; i < n_chans; i++, reg += 4) { + int slot_phase = dsp_mode | (i & CS42L43_ASP_CH_SLOT_PHASE_MASK); + int slot_pos; + + if (dsp_mode) + slot_pos = slots[i] * slot_width; + else + slot_pos = (slots[i] / 2) * slot_width; + + dev_dbg(priv->dev, "Configure channel %d at slot %d (%d,%d)\n", + i, slots[i], slot_pos, slot_phase); + + regmap_update_bits(cs42l43->regmap, reg, + CS42L43_ASP_CH_WIDTH_MASK | + CS42L43_ASP_CH_SLOT_MASK | + CS42L43_ASP_CH_SLOT_PHASE_MASK, + ((data_width - 1) << CS42L43_ASP_CH_WIDTH_SHIFT) | + (slot_pos << CS42L43_ASP_CH_SLOT_SHIFT) | + slot_phase); + } + + return cs42l43_set_sample_rate(substream, params, dai); +} + +static int cs42l43_asp_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + int provider = regmap_test_bits(cs42l43->regmap, CS42L43_ASP_CLK_CONFIG2, + CS42L43_ASP_MASTER_MODE_MASK); + struct snd_soc_dapm_route routes[] = { + { "BCLK", NULL, "FSYNC" }, + }; + unsigned int asp_ctrl = 0; + unsigned int data_ctrl = 0; + unsigned int fsync_ctrl = 0; + unsigned int clk_config = 0; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + data_ctrl |= 2 << CS42L43_ASP_FSYNC_FRAME_START_DLY_SHIFT; + fallthrough; + case SND_SOC_DAIFMT_DSP_B: + asp_ctrl |= CS42L43_ASP_FSYNC_MODE_MASK; + data_ctrl |= CS42L43_ASP_FSYNC_FRAME_START_PHASE_MASK; + break; + case SND_SOC_DAIFMT_I2S: + data_ctrl |= 2 << CS42L43_ASP_FSYNC_FRAME_START_DLY_SHIFT; + break; + case SND_SOC_DAIFMT_LEFT_J: + data_ctrl |= CS42L43_ASP_FSYNC_FRAME_START_PHASE_MASK; + break; + default: + dev_err(priv->dev, "Unsupported DAI format 0x%x\n", + fmt & SND_SOC_DAIFMT_FORMAT_MASK); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_CBC_CFC: + if (provider) + snd_soc_dapm_del_routes(dapm, routes, ARRAY_SIZE(routes)); + break; + case SND_SOC_DAIFMT_CBP_CFP: + if (!provider) + snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes)); + clk_config |= CS42L43_ASP_MASTER_MODE_MASK; + break; + default: + dev_err(priv->dev, "Unsupported ASP mode 0x%x\n", + fmt & SND_SOC_DAIFMT_MASTER_MASK); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + clk_config |= CS42L43_ASP_BCLK_INV_MASK; /* Yes BCLK_INV = NB */ + break; + case SND_SOC_DAIFMT_IB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + clk_config |= CS42L43_ASP_BCLK_INV_MASK; + fsync_ctrl |= CS42L43_ASP_FSYNC_IN_INV_MASK | + CS42L43_ASP_FSYNC_OUT_INV_MASK; + break; + case SND_SOC_DAIFMT_IB_IF: + fsync_ctrl |= CS42L43_ASP_FSYNC_IN_INV_MASK | + CS42L43_ASP_FSYNC_OUT_INV_MASK; + break; + default: + dev_err(priv->dev, "Unsupported invert mode 0x%x\n", + fmt & SND_SOC_DAIFMT_INV_MASK); + return -EINVAL; + } + + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_CTRL, + CS42L43_ASP_FSYNC_MODE_MASK, + asp_ctrl); + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_DATA_CTRL, + CS42L43_ASP_FSYNC_FRAME_START_DLY_MASK | + CS42L43_ASP_FSYNC_FRAME_START_PHASE_MASK, + data_ctrl); + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_CLK_CONFIG2, + CS42L43_ASP_MASTER_MODE_MASK | + CS42L43_ASP_BCLK_INV_MASK, + clk_config); + regmap_update_bits(cs42l43->regmap, CS42L43_ASP_FSYNC_CTRL3, + CS42L43_ASP_FSYNC_IN_INV_MASK | + CS42L43_ASP_FSYNC_OUT_INV_MASK, + fsync_ctrl); + + return 0; +} + +static void cs42l43_mask_to_slots(struct cs42l43_codec *priv, unsigned int mask, int *slots) +{ + int i; + + for (i = 0; i < CS42L43_ASP_MAX_CHANNELS; ++i) { + int slot = ffs(mask) - 1; + + if (slot < 0) + return; + + slots[i] = slot; + + mask &= ~(1 << slot); + } + + if (mask) + dev_warn(priv->dev, "Too many channels in TDM mask\n"); +} + +static int cs42l43_asp_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + priv->n_slots = slots; + priv->slot_width = slot_width; + + if (!slots) { + tx_mask = CS42L43_DEFAULT_SLOTS; + rx_mask = CS42L43_DEFAULT_SLOTS; + } + + cs42l43_mask_to_slots(priv, tx_mask, priv->tx_slots); + cs42l43_mask_to_slots(priv, rx_mask, priv->rx_slots); + + return 0; +} + +static const struct snd_soc_dai_ops cs42l43_asp_ops = { + .startup = cs42l43_startup, + .hw_params = cs42l43_asp_hw_params, + .set_fmt = cs42l43_asp_set_fmt, + .set_tdm_slot = cs42l43_asp_set_tdm_slot, +}; + +static int cs42l43_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + int ret; + + ret = cs42l43_sdw_add_peripheral(substream, params, dai); + if (ret) + return ret; + + return cs42l43_set_sample_rate(substream, params, dai); +}; + +static const struct snd_soc_dai_ops cs42l43_sdw_ops = { + .startup = cs42l43_startup, + .set_stream = cs42l43_sdw_set_stream, + .hw_params = cs42l43_sdw_hw_params, + .hw_free = cs42l43_sdw_remove_peripheral, +}; + +#define CS42L43_ASP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) +#define CS42L43_SDW_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver cs42l43_dais[] = { + { + .name = "cs42l43-asp", + .ops = &cs42l43_asp_ops, + .symmetric_rate = 1, + .capture = { + .stream_name = "ASP Capture", + .channels_min = 1, + .channels_max = CS42L43_ASP_MAX_CHANNELS, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_ASP_FORMATS, + }, + .playback = { + .stream_name = "ASP Playback", + .channels_min = 1, + .channels_max = CS42L43_ASP_MAX_CHANNELS, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_ASP_FORMATS, + }, + }, + { + .name = "cs42l43-dp1", + .ops = &cs42l43_sdw_ops, + .capture = { + .stream_name = "DP1 Capture", + .channels_min = 1, + .channels_max = 4, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp2", + .ops = &cs42l43_sdw_ops, + .capture = { + .stream_name = "DP2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp3", + .ops = &cs42l43_sdw_ops, + .capture = { + .stream_name = "DP3 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp4", + .ops = &cs42l43_sdw_ops, + .capture = { + .stream_name = "DP4 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp5", + .ops = &cs42l43_sdw_ops, + .playback = { + .stream_name = "DP5 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp6", + .ops = &cs42l43_sdw_ops, + .playback = { + .stream_name = "DP6 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, + { + .name = "cs42l43-dp7", + .ops = &cs42l43_sdw_ops, + .playback = { + .stream_name = "DP7 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = CS42L43_SDW_FORMATS, + }, + }, +}; + +static const DECLARE_TLV_DB_SCALE(cs42l43_mixer_tlv, -3200, 100, 0); + +static const char * const cs42l43_ramp_text[] = { + "0ms/6dB", "0.5ms/6dB", "1ms/6dB", "2ms/6dB", "4ms/6dB", "8ms/6dB", + "15ms/6dB", "30ms/6dB", +}; + +static const char * const cs42l43_adc1_input_text[] = { "IN1", "IN2" }; + +static SOC_ENUM_SINGLE_DECL(cs42l43_adc1_input, CS42L43_ADC_B_CTRL1, + CS42L43_ADC_AIN_SEL_SHIFT, + cs42l43_adc1_input_text); + +static const struct snd_kcontrol_new cs42l43_adc1_input_ctl = + SOC_DAPM_ENUM("ADC1 Input", cs42l43_adc1_input); + +static const char * const cs42l43_dec_mode_text[] = { "ADC", "PDM" }; + +static SOC_ENUM_SINGLE_VIRT_DECL(cs42l43_dec1_mode, cs42l43_dec_mode_text); +static SOC_ENUM_SINGLE_VIRT_DECL(cs42l43_dec2_mode, cs42l43_dec_mode_text); + +static const struct snd_kcontrol_new cs42l43_dec_mode_ctl[] = { + SOC_DAPM_ENUM("Decimator 1 Mode", cs42l43_dec1_mode), + SOC_DAPM_ENUM("Decimator 2 Mode", cs42l43_dec2_mode), +}; + +static const char * const cs42l43_pdm_clk_text[] = { + "3.072MHz", "1.536MHz", "768kHz", +}; + +static SOC_ENUM_SINGLE_DECL(cs42l43_pdm1_clk, CS42L43_PDM_CONTROL, + CS42L43_PDM1_CLK_DIV_SHIFT, cs42l43_pdm_clk_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_pdm2_clk, CS42L43_PDM_CONTROL, + CS42L43_PDM2_CLK_DIV_SHIFT, cs42l43_pdm_clk_text); + +static DECLARE_TLV_DB_SCALE(cs42l43_adc_tlv, -600, 600, 0); +static DECLARE_TLV_DB_SCALE(cs42l43_dec_tlv, -6400, 50, 0); + +static const char * const cs42l43_wnf_corner_text[] = { + "160Hz", "180Hz", "200Hz", "220Hz", "240Hz", "260Hz", "280Hz", "300Hz", +}; + +static SOC_ENUM_SINGLE_DECL(cs42l43_dec1_wnf_corner, CS42L43_DECIM_HPF_WNF_CTRL1, + CS42L43_DECIM_WNF_CF_SHIFT, cs42l43_wnf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec2_wnf_corner, CS42L43_DECIM_HPF_WNF_CTRL2, + CS42L43_DECIM_WNF_CF_SHIFT, cs42l43_wnf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec3_wnf_corner, CS42L43_DECIM_HPF_WNF_CTRL3, + CS42L43_DECIM_WNF_CF_SHIFT, cs42l43_wnf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec4_wnf_corner, CS42L43_DECIM_HPF_WNF_CTRL4, + CS42L43_DECIM_WNF_CF_SHIFT, cs42l43_wnf_corner_text); + +static const char * const cs42l43_hpf_corner_text[] = { + "3Hz", "12Hz", "48Hz", "96Hz", +}; + +static SOC_ENUM_SINGLE_DECL(cs42l43_dec1_hpf_corner, CS42L43_DECIM_HPF_WNF_CTRL1, + CS42L43_DECIM_HPF_CF_SHIFT, cs42l43_hpf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec2_hpf_corner, CS42L43_DECIM_HPF_WNF_CTRL2, + CS42L43_DECIM_HPF_CF_SHIFT, cs42l43_hpf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec3_hpf_corner, CS42L43_DECIM_HPF_WNF_CTRL3, + CS42L43_DECIM_HPF_CF_SHIFT, cs42l43_hpf_corner_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec4_hpf_corner, CS42L43_DECIM_HPF_WNF_CTRL4, + CS42L43_DECIM_HPF_CF_SHIFT, cs42l43_hpf_corner_text); + +static SOC_ENUM_SINGLE_DECL(cs42l43_dec1_ramp_up, CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM1_VI_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec1_ramp_down, CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM1_VD_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec2_ramp_up, CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM2_VI_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec2_ramp_down, CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM2_VD_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec3_ramp_up, CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM3_VI_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec3_ramp_down, CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM3_VD_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec4_ramp_up, CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM4_VI_RAMP_SHIFT, cs42l43_ramp_text); +static SOC_ENUM_SINGLE_DECL(cs42l43_dec4_ramp_down, CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM4_VD_RAMP_SHIFT, cs42l43_ramp_text); + +static DECLARE_TLV_DB_SCALE(cs42l43_speaker_tlv, -6400, 50, 0); + +static SOC_ENUM_SINGLE_DECL(cs42l43_speaker_ramp_up, CS42L43_AMP1_2_VOL_RAMP, + CS42L43_AMP1_2_VI_RAMP_SHIFT, cs42l43_ramp_text); + +static SOC_ENUM_SINGLE_DECL(cs42l43_speaker_ramp_down, CS42L43_AMP1_2_VOL_RAMP, + CS42L43_AMP1_2_VD_RAMP_SHIFT, cs42l43_ramp_text); + +static DECLARE_TLV_DB_SCALE(cs42l43_headphone_tlv, -11450, 50, 1); + +static const char * const cs42l43_headphone_ramp_text[] = { + "1", "2", "4", "6", "8", "11", "12", "16", "22", "24", "33", "36", "44", + "48", "66", "72", +}; + +static SOC_ENUM_SINGLE_DECL(cs42l43_headphone_ramp, CS42L43_PGAVOL, + CS42L43_HP_PATH_VOL_RAMP_SHIFT, + cs42l43_headphone_ramp_text); + +static const char * const cs42l43_tone_freq_text[] = { + "1kHz", "2kHz", "4kHz", "6kHz", "8kHz", +}; + +static SOC_ENUM_SINGLE_DECL(cs42l43_tone1_freq, CS42L43_TONE_CH1_CTRL, + CS42L43_TONE_FREQ_SHIFT, cs42l43_tone_freq_text); + +static SOC_ENUM_SINGLE_DECL(cs42l43_tone2_freq, CS42L43_TONE_CH2_CTRL, + CS42L43_TONE_FREQ_SHIFT, cs42l43_tone_freq_text); + +static const char * const cs42l43_mixer_texts[] = { + "None", + "Tone Generator 1", "Tone Generator 2", + "Decimator 1", "Decimator 2", "Decimator 3", "Decimator 4", + "ASPRX1", "ASPRX2", "ASPRX3", "ASPRX4", "ASPRX5", "ASPRX6", + "DP5RX1", "DP5RX2", "DP6RX1", "DP6RX2", "DP7RX1", "DP7RX2", + "ASRC INT1", "ASRC INT2", "ASRC INT3", "ASRC INT4", + "ASRC DEC1", "ASRC DEC2", "ASRC DEC3", "ASRC DEC4", + "ISRC1 INT1", "ISRC1 INT2", + "ISRC1 DEC1", "ISRC1 DEC2", + "ISRC2 INT1", "ISRC2 INT2", + "ISRC2 DEC1", "ISRC2 DEC2", + "EQ1", "EQ2", +}; + +static const unsigned int cs42l43_mixer_values[] = { + 0x00, // None + 0x04, 0x05, // Tone Generator 1, 2 + 0x10, 0x11, 0x12, 0x13, // Decimator 1, 2, 3, 4 + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, // ASPRX1,2,3,4,5,6 + 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, // DP5, 6, 7RX1, 2 + 0x40, 0x41, 0x42, 0x43, // ASRC INT1, 2, 3, 4 + 0x44, 0x45, 0x46, 0x47, // ASRC DEC1, 2, 3, 4 + 0x50, 0x51, // ISRC1 INT1, 2 + 0x52, 0x53, // ISRC1 DEC1, 2 + 0x54, 0x55, // ISRC2 INT1, 2 + 0x56, 0x57, // ISRC2 DEC1, 2 + 0x58, 0x59, // EQ1, 2 +}; + +CS42L43_DECL_MUX(asptx1, CS42L43_ASPTX1_INPUT); +CS42L43_DECL_MUX(asptx2, CS42L43_ASPTX2_INPUT); +CS42L43_DECL_MUX(asptx3, CS42L43_ASPTX3_INPUT); +CS42L43_DECL_MUX(asptx4, CS42L43_ASPTX4_INPUT); +CS42L43_DECL_MUX(asptx5, CS42L43_ASPTX5_INPUT); +CS42L43_DECL_MUX(asptx6, CS42L43_ASPTX6_INPUT); + +CS42L43_DECL_MUX(dp1tx1, CS42L43_SWIRE_DP1_CH1_INPUT); +CS42L43_DECL_MUX(dp1tx2, CS42L43_SWIRE_DP1_CH2_INPUT); +CS42L43_DECL_MUX(dp1tx3, CS42L43_SWIRE_DP1_CH3_INPUT); +CS42L43_DECL_MUX(dp1tx4, CS42L43_SWIRE_DP1_CH4_INPUT); +CS42L43_DECL_MUX(dp2tx1, CS42L43_SWIRE_DP2_CH1_INPUT); +CS42L43_DECL_MUX(dp2tx2, CS42L43_SWIRE_DP2_CH2_INPUT); +CS42L43_DECL_MUX(dp3tx1, CS42L43_SWIRE_DP3_CH1_INPUT); +CS42L43_DECL_MUX(dp3tx2, CS42L43_SWIRE_DP3_CH2_INPUT); +CS42L43_DECL_MUX(dp4tx1, CS42L43_SWIRE_DP4_CH1_INPUT); +CS42L43_DECL_MUX(dp4tx2, CS42L43_SWIRE_DP4_CH2_INPUT); + +CS42L43_DECL_MUX(asrcint1, CS42L43_ASRC_INT1_INPUT1); +CS42L43_DECL_MUX(asrcint2, CS42L43_ASRC_INT2_INPUT1); +CS42L43_DECL_MUX(asrcint3, CS42L43_ASRC_INT3_INPUT1); +CS42L43_DECL_MUX(asrcint4, CS42L43_ASRC_INT4_INPUT1); +CS42L43_DECL_MUX(asrcdec1, CS42L43_ASRC_DEC1_INPUT1); +CS42L43_DECL_MUX(asrcdec2, CS42L43_ASRC_DEC2_INPUT1); +CS42L43_DECL_MUX(asrcdec3, CS42L43_ASRC_DEC3_INPUT1); +CS42L43_DECL_MUX(asrcdec4, CS42L43_ASRC_DEC4_INPUT1); + +CS42L43_DECL_MUX(isrc1int1, CS42L43_ISRC1INT1_INPUT1); +CS42L43_DECL_MUX(isrc1int2, CS42L43_ISRC1INT2_INPUT1); +CS42L43_DECL_MUX(isrc1dec1, CS42L43_ISRC1DEC1_INPUT1); +CS42L43_DECL_MUX(isrc1dec2, CS42L43_ISRC1DEC2_INPUT1); +CS42L43_DECL_MUX(isrc2int1, CS42L43_ISRC2INT1_INPUT1); +CS42L43_DECL_MUX(isrc2int2, CS42L43_ISRC2INT2_INPUT1); +CS42L43_DECL_MUX(isrc2dec1, CS42L43_ISRC2DEC1_INPUT1); +CS42L43_DECL_MUX(isrc2dec2, CS42L43_ISRC2DEC2_INPUT1); + +CS42L43_DECL_MUX(spdif1, CS42L43_SPDIF1_INPUT1); +CS42L43_DECL_MUX(spdif2, CS42L43_SPDIF2_INPUT1); + +CS42L43_DECL_MIXER(eq1, CS42L43_EQ1MIX_INPUT1); +CS42L43_DECL_MIXER(eq2, CS42L43_EQ2MIX_INPUT1); + +CS42L43_DECL_MIXER(amp1, CS42L43_AMP1MIX_INPUT1); +CS42L43_DECL_MIXER(amp2, CS42L43_AMP2MIX_INPUT1); + +CS42L43_DECL_MIXER(amp3, CS42L43_AMP3MIX_INPUT1); +CS42L43_DECL_MIXER(amp4, CS42L43_AMP4MIX_INPUT1); + +static int cs42l43_dapm_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + int ret; + + snd_soc_dapm_mutex_lock(dapm); + ret = snd_soc_get_volsw(kcontrol, ucontrol); + snd_soc_dapm_mutex_unlock(dapm); + + return ret; +} + +static int cs42l43_dapm_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + int ret; + + snd_soc_dapm_mutex_lock(dapm); + ret = snd_soc_put_volsw(kcontrol, ucontrol); + snd_soc_dapm_mutex_unlock(dapm); + + return ret; +} + +static int cs42l43_dapm_get_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + int ret; + + snd_soc_dapm_mutex_lock(dapm); + ret = snd_soc_get_enum_double(kcontrol, ucontrol); + snd_soc_dapm_mutex_unlock(dapm); + + return ret; +} + +static int cs42l43_dapm_put_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + int ret; + + snd_soc_dapm_mutex_lock(dapm); + ret = snd_soc_put_enum_double(kcontrol, ucontrol); + snd_soc_dapm_mutex_unlock(dapm); + + return ret; +} + +static int cs42l43_eq_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + memcpy(ucontrol->value.integer.value, priv->eq_coeffs, sizeof(priv->eq_coeffs)); + + return 0; +} + +static int cs42l43_eq_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + snd_soc_dapm_mutex_lock(dapm); + + memcpy(priv->eq_coeffs, ucontrol->value.integer.value, sizeof(priv->eq_coeffs)); + + snd_soc_dapm_mutex_unlock(dapm); + + return 0; +} + +static void cs42l43_spk_vu_sync(struct cs42l43_codec *priv) +{ + struct cs42l43 *cs42l43 = priv->core; + + mutex_lock(&priv->spk_vu_lock); + + regmap_update_bits(cs42l43->regmap, CS42L43_INTP_VOLUME_CTRL1, + CS42L43_AMP1_2_VU_MASK, CS42L43_AMP1_2_VU_MASK); + regmap_update_bits(cs42l43->regmap, CS42L43_INTP_VOLUME_CTRL1, + CS42L43_AMP1_2_VU_MASK, 0); + + mutex_unlock(&priv->spk_vu_lock); +} + +static int cs42l43_shutter_get(struct cs42l43_codec *priv, unsigned int shift) +{ + struct cs42l43 *cs42l43 = priv->core; + unsigned int val; + int ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret) { + dev_err(priv->dev, "Failed to resume for shutters: %d\n", ret); + return ret; + } + + /* + * SHUTTER_CONTROL is a mix of volatile and non-volatile bits, so must + * be cached for the non-volatiles, so drop it from the cache here so + * we force a read. + */ + ret = regcache_drop_region(cs42l43->regmap, CS42L43_SHUTTER_CONTROL, + CS42L43_SHUTTER_CONTROL); + if (ret) { + dev_err(priv->dev, "Failed to drop shutter from cache: %d\n", ret); + goto error; + } + + ret = regmap_read(cs42l43->regmap, CS42L43_SHUTTER_CONTROL, &val); + if (ret) { + dev_err(priv->dev, "Failed to check shutter status: %d\n", ret); + goto error; + } + + ret = !(val & BIT(shift)); + + dev_dbg(priv->dev, "%s shutter is %s\n", + BIT(shift) == CS42L43_STATUS_MIC_SHUTTER_MUTE_MASK ? "Mic" : "Speaker", + ret ? "open" : "closed"); + +error: + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return ret; +} + +static int cs42l43_decim_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + int ret; + + ret = cs42l43_shutter_get(priv, CS42L43_STATUS_MIC_SHUTTER_MUTE_SHIFT); + if (ret < 0) + return ret; + else if (!ret) + ucontrol->value.integer.value[0] = ret; + else + ret = cs42l43_dapm_get_volsw(kcontrol, ucontrol); + + return ret; +} + +static int cs42l43_spk_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + int ret; + + ret = cs42l43_shutter_get(priv, CS42L43_STATUS_SPK_SHUTTER_MUTE_SHIFT); + if (ret < 0) + return ret; + else if (!ret) + ucontrol->value.integer.value[0] = ret; + else + ret = snd_soc_get_volsw(kcontrol, ucontrol); + + return ret; +} + +static int cs42l43_spk_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + int ret; + + ret = snd_soc_put_volsw(kcontrol, ucontrol); + if (ret > 0) + cs42l43_spk_vu_sync(priv); + + return ret; +} + +static const struct snd_kcontrol_new cs42l43_controls[] = { + SOC_ENUM_EXT("Jack Override", cs42l43_jack_enum, + cs42l43_jack_get, cs42l43_jack_put), + + SOC_DOUBLE_R_SX_TLV("ADC Volume", CS42L43_ADC_B_CTRL1, CS42L43_ADC_B_CTRL2, + CS42L43_ADC_PGA_GAIN_SHIFT, + 0xF, 5, cs42l43_adc_tlv), + + SOC_DOUBLE("PDM1 Invert Switch", CS42L43_DMIC_PDM_CTRL, + CS42L43_PDM1L_INV_SHIFT, CS42L43_PDM1R_INV_SHIFT, 1, 0), + SOC_DOUBLE("PDM2 Invert Switch", CS42L43_DMIC_PDM_CTRL, + CS42L43_PDM2L_INV_SHIFT, CS42L43_PDM2R_INV_SHIFT, 1, 0), + SOC_ENUM("PDM1 Clock", cs42l43_pdm1_clk), + SOC_ENUM("PDM2 Clock", cs42l43_pdm2_clk), + + SOC_SINGLE("Decimator 1 WNF Switch", CS42L43_DECIM_HPF_WNF_CTRL1, + CS42L43_DECIM_WNF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 2 WNF Switch", CS42L43_DECIM_HPF_WNF_CTRL2, + CS42L43_DECIM_WNF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 3 WNF Switch", CS42L43_DECIM_HPF_WNF_CTRL3, + CS42L43_DECIM_WNF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 4 WNF Switch", CS42L43_DECIM_HPF_WNF_CTRL4, + CS42L43_DECIM_WNF_EN_SHIFT, 1, 0), + + SOC_ENUM("Decimator 1 WNF Corner Frequency", cs42l43_dec1_wnf_corner), + SOC_ENUM("Decimator 2 WNF Corner Frequency", cs42l43_dec2_wnf_corner), + SOC_ENUM("Decimator 3 WNF Corner Frequency", cs42l43_dec3_wnf_corner), + SOC_ENUM("Decimator 4 WNF Corner Frequency", cs42l43_dec4_wnf_corner), + + SOC_SINGLE("Decimator 1 HPF Switch", CS42L43_DECIM_HPF_WNF_CTRL1, + CS42L43_DECIM_HPF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 2 HPF Switch", CS42L43_DECIM_HPF_WNF_CTRL2, + CS42L43_DECIM_HPF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 3 HPF Switch", CS42L43_DECIM_HPF_WNF_CTRL3, + CS42L43_DECIM_HPF_EN_SHIFT, 1, 0), + SOC_SINGLE("Decimator 4 HPF Switch", CS42L43_DECIM_HPF_WNF_CTRL4, + CS42L43_DECIM_HPF_EN_SHIFT, 1, 0), + + SOC_ENUM("Decimator 1 HPF Corner Frequency", cs42l43_dec1_hpf_corner), + SOC_ENUM("Decimator 2 HPF Corner Frequency", cs42l43_dec2_hpf_corner), + SOC_ENUM("Decimator 3 HPF Corner Frequency", cs42l43_dec3_hpf_corner), + SOC_ENUM("Decimator 4 HPF Corner Frequency", cs42l43_dec4_hpf_corner), + + SOC_SINGLE_TLV("Decimator 1 Volume", CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM1_VOL_SHIFT, 0xBF, 0, cs42l43_dec_tlv), + SOC_SINGLE_EXT("Decimator 1 Switch", CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM1_MUTE_SHIFT, 1, 1, + cs42l43_decim_get, cs42l43_dapm_put_volsw), + SOC_SINGLE_TLV("Decimator 2 Volume", CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM2_VOL_SHIFT, 0xBF, 0, cs42l43_dec_tlv), + SOC_SINGLE_EXT("Decimator 2 Switch", CS42L43_DECIM_VOL_CTRL_CH1_CH2, + CS42L43_DECIM2_MUTE_SHIFT, 1, 1, + cs42l43_decim_get, cs42l43_dapm_put_volsw), + SOC_SINGLE_TLV("Decimator 3 Volume", CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM3_VOL_SHIFT, 0xBF, 0, cs42l43_dec_tlv), + SOC_SINGLE_EXT("Decimator 3 Switch", CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM3_MUTE_SHIFT, 1, 1, + cs42l43_decim_get, cs42l43_dapm_put_volsw), + SOC_SINGLE_TLV("Decimator 4 Volume", CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM4_VOL_SHIFT, 0xBF, 0, cs42l43_dec_tlv), + SOC_SINGLE_EXT("Decimator 4 Switch", CS42L43_DECIM_VOL_CTRL_CH3_CH4, + CS42L43_DECIM4_MUTE_SHIFT, 1, 1, + cs42l43_decim_get, cs42l43_dapm_put_volsw), + + SOC_ENUM_EXT("Decimator 1 Ramp Up", cs42l43_dec1_ramp_up, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 1 Ramp Down", cs42l43_dec1_ramp_down, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 2 Ramp Up", cs42l43_dec2_ramp_up, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 2 Ramp Down", cs42l43_dec2_ramp_down, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 3 Ramp Up", cs42l43_dec3_ramp_up, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 3 Ramp Down", cs42l43_dec3_ramp_down, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 4 Ramp Up", cs42l43_dec4_ramp_up, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + SOC_ENUM_EXT("Decimator 4 Ramp Down", cs42l43_dec4_ramp_down, + cs42l43_dapm_get_enum, cs42l43_dapm_put_enum), + + SOC_DOUBLE_R_EXT("Speaker Digital Switch", + CS42L43_INTP_VOLUME_CTRL1, CS42L43_INTP_VOLUME_CTRL2, + CS42L43_AMP_MUTE_SHIFT, 1, 1, + cs42l43_spk_get, cs42l43_spk_put), + + SOC_DOUBLE_R_EXT_TLV("Speaker Digital Volume", + CS42L43_INTP_VOLUME_CTRL1, CS42L43_INTP_VOLUME_CTRL2, + CS42L43_AMP_VOL_SHIFT, + 0xBF, 0, snd_soc_get_volsw, cs42l43_spk_put, + cs42l43_speaker_tlv), + + SOC_ENUM("Speaker Ramp Up", cs42l43_speaker_ramp_up), + SOC_ENUM("Speaker Ramp Down", cs42l43_speaker_ramp_down), + + CS42L43_MIXER_VOLUMES("Speaker L", CS42L43_AMP1MIX_INPUT1), + CS42L43_MIXER_VOLUMES("Speaker R", CS42L43_AMP2MIX_INPUT1), + + SOC_DOUBLE_SX_TLV("Headphone Digital Volume", CS42L43_HPPATHVOL, + CS42L43_AMP3_PATH_VOL_SHIFT, CS42L43_AMP4_PATH_VOL_SHIFT, + 0x11B, 229, cs42l43_headphone_tlv), + + SOC_DOUBLE("Headphone Invert Switch", CS42L43_DACCNFG1, + CS42L43_AMP3_INV_SHIFT, CS42L43_AMP4_INV_SHIFT, 1, 0), + + SOC_SINGLE("Headphone Zero Cross Switch", CS42L43_PGAVOL, + CS42L43_HP_PATH_VOL_ZC_SHIFT, 1, 0), + SOC_SINGLE("Headphone Ramp Switch", CS42L43_PGAVOL, + CS42L43_HP_PATH_VOL_SFT_SHIFT, 1, 0), + SOC_ENUM("Headphone Ramp Rate", cs42l43_headphone_ramp), + + CS42L43_MIXER_VOLUMES("Headphone L", CS42L43_AMP3MIX_INPUT1), + CS42L43_MIXER_VOLUMES("Headphone R", CS42L43_AMP4MIX_INPUT1), + + SOC_ENUM("Tone 1 Frequency", cs42l43_tone1_freq), + SOC_ENUM("Tone 2 Frequency", cs42l43_tone2_freq), + + SOC_DOUBLE_EXT("EQ Switch", + CS42L43_MUTE_EQ_IN0, CS42L43_MUTE_EQ_CH1_SHIFT, + CS42L43_MUTE_EQ_CH2_SHIFT, 1, 1, + cs42l43_dapm_get_volsw, cs42l43_dapm_put_volsw), + + SND_SOC_BYTES_E("EQ Coefficients", 0, CS42L43_N_EQ_COEFFS, + cs42l43_eq_get, cs42l43_eq_put), + + CS42L43_MIXER_VOLUMES("EQ1", CS42L43_EQ1MIX_INPUT1), + CS42L43_MIXER_VOLUMES("EQ2", CS42L43_EQ2MIX_INPUT1), +}; + +static int cs42l43_eq_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + unsigned int val; + int i, ret; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(cs42l43->regmap, CS42L43_MUTE_EQ_IN0, + CS42L43_MUTE_EQ_CH1_MASK | CS42L43_MUTE_EQ_CH2_MASK, + CS42L43_MUTE_EQ_CH1_MASK | CS42L43_MUTE_EQ_CH2_MASK); + + regmap_update_bits(cs42l43->regmap, CS42L43_COEFF_RD_WR0, + CS42L43_WRITE_MODE_MASK, CS42L43_WRITE_MODE_MASK); + + for (i = 0; i < CS42L43_N_EQ_COEFFS; i++) + regmap_write(cs42l43->regmap, CS42L43_COEFF_DATA_IN0, + priv->eq_coeffs[i]); + + regmap_update_bits(cs42l43->regmap, CS42L43_COEFF_RD_WR0, + CS42L43_WRITE_MODE_MASK, 0); + + return 0; + case SND_SOC_DAPM_POST_PMU: + ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_INIT_DONE0, + val, (val & CS42L43_INITIALIZE_DONE_MASK), + 2000, 10000); + if (ret) + dev_err(priv->dev, "Failed to start EQs: %d\n", ret); + + regmap_update_bits(cs42l43->regmap, CS42L43_MUTE_EQ_IN0, + CS42L43_MUTE_EQ_CH1_MASK | CS42L43_MUTE_EQ_CH2_MASK, 0); + return ret; + default: + return 0; + } +} + +struct cs42l43_pll_config { + unsigned int freq; + + unsigned int div; + unsigned int mode; + unsigned int cal; +}; + +static const struct cs42l43_pll_config cs42l43_pll_configs[] = { + { 2400000, 0x50000000, 0x1, 0xA4 }, + { 3000000, 0x40000000, 0x1, 0x83 }, + { 3072000, 0x40000000, 0x3, 0x80 }, +}; + +static int cs42l43_set_pll(struct cs42l43_codec *priv, unsigned int src, + unsigned int freq) +{ + struct cs42l43 *cs42l43 = priv->core; + + lockdep_assert_held(&cs42l43->pll_lock); + + if (priv->refclk_src == src && priv->refclk_freq == freq) + return 0; + + if (regmap_test_bits(cs42l43->regmap, CS42L43_CTRL_REG, CS42L43_PLL_EN_MASK)) { + dev_err(priv->dev, "PLL active, can't change configuration\n"); + return -EBUSY; + } + + switch (src) { + case CS42L43_SYSCLK_MCLK: + case CS42L43_SYSCLK_SDW: + dev_dbg(priv->dev, "Source PLL from %s at %uHz\n", + src ? "SoundWire" : "MCLK", freq); + + priv->refclk_src = src; + priv->refclk_freq = freq; + + return 0; + default: + dev_err(priv->dev, "Invalid PLL source: 0x%x\n", src); + return -EINVAL; + } +} + +static int cs42l43_enable_pll(struct cs42l43_codec *priv) +{ + static const struct reg_sequence enable_seq[] = { + { CS42L43_OSC_DIV_SEL, 0x0, }, + { CS42L43_MCLK_SRC_SEL, CS42L43_OSC_PLL_MCLK_SEL_MASK, 5, }, + }; + struct cs42l43 *cs42l43 = priv->core; + const struct cs42l43_pll_config *config = NULL; + unsigned int div = 0; + unsigned int freq = priv->refclk_freq; + unsigned long time_left; + + lockdep_assert_held(&cs42l43->pll_lock); + + if (priv->refclk_src == CS42L43_SYSCLK_SDW) { + if (!freq) + freq = cs42l43->sdw_freq; + else if (!cs42l43->sdw_freq) + cs42l43->sdw_freq = freq; + } + + dev_dbg(priv->dev, "Enabling PLL at %uHz\n", freq); + + while (freq > cs42l43_pll_configs[ARRAY_SIZE(cs42l43_pll_configs) - 1].freq) { + div++; + freq /= 2; + } + + if (div <= CS42L43_PLL_REFCLK_DIV_MASK) { + int i; + + for (i = 0; i < ARRAY_SIZE(cs42l43_pll_configs); i++) { + if (freq == cs42l43_pll_configs[i].freq) { + config = &cs42l43_pll_configs[i]; + break; + } + } + } + + if (!config) { + dev_err(priv->dev, "No suitable PLL config: 0x%x, %uHz\n", div, freq); + return -EINVAL; + } + + regmap_update_bits(cs42l43->regmap, CS42L43_PLL_CONTROL, + CS42L43_PLL_REFCLK_DIV_MASK | CS42L43_PLL_REFCLK_SRC_MASK, + div << CS42L43_PLL_REFCLK_DIV_SHIFT | + priv->refclk_src << CS42L43_PLL_REFCLK_SRC_SHIFT); + regmap_write(cs42l43->regmap, CS42L43_FDIV_FRAC, config->div); + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL_REG, + CS42L43_PLL_MODE_BYPASS_500_MASK | + CS42L43_PLL_MODE_BYPASS_1029_MASK, + config->mode << CS42L43_PLL_MODE_BYPASS_1029_SHIFT); + regmap_update_bits(cs42l43->regmap, CS42L43_CAL_RATIO, + CS42L43_PLL_CAL_RATIO_MASK, config->cal); + regmap_update_bits(cs42l43->regmap, CS42L43_PLL_CONTROL, + CS42L43_PLL_REFCLK_EN_MASK, CS42L43_PLL_REFCLK_EN_MASK); + + reinit_completion(&priv->pll_ready); + + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL_REG, + CS42L43_PLL_EN_MASK, CS42L43_PLL_EN_MASK); + + time_left = wait_for_completion_timeout(&priv->pll_ready, + msecs_to_jiffies(CS42L43_PLL_TIMEOUT_MS)); + if (!time_left) { + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL_REG, + CS42L43_PLL_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_PLL_CONTROL, + CS42L43_PLL_REFCLK_EN_MASK, 0); + + dev_err(priv->dev, "Timeout out waiting for PLL\n"); + return -ETIMEDOUT; + } + + if (priv->refclk_src == CS42L43_SYSCLK_SDW) + cs42l43->sdw_pll_active = true; + + dev_dbg(priv->dev, "PLL locked in %ums\n", 200 - jiffies_to_msecs(time_left)); + + /* + * Reads are not allowed over Soundwire without OSC_DIV2_EN or the PLL, + * but you can not change to PLL with OSC_DIV2_EN set. So ensure the whole + * change over happens under the regmap lock to prevent any reads. + */ + regmap_multi_reg_write(cs42l43->regmap, enable_seq, ARRAY_SIZE(enable_seq)); + + return 0; +} + +static int cs42l43_disable_pll(struct cs42l43_codec *priv) +{ + static const struct reg_sequence disable_seq[] = { + { CS42L43_MCLK_SRC_SEL, 0x0, 5, }, + { CS42L43_OSC_DIV_SEL, CS42L43_OSC_DIV2_EN_MASK, }, + }; + struct cs42l43 *cs42l43 = priv->core; + + dev_dbg(priv->dev, "Disabling PLL\n"); + + lockdep_assert_held(&cs42l43->pll_lock); + + regmap_multi_reg_write(cs42l43->regmap, disable_seq, ARRAY_SIZE(disable_seq)); + regmap_update_bits(cs42l43->regmap, CS42L43_CTRL_REG, CS42L43_PLL_EN_MASK, 0); + regmap_update_bits(cs42l43->regmap, CS42L43_PLL_CONTROL, + CS42L43_PLL_REFCLK_EN_MASK, 0); + + cs42l43->sdw_pll_active = false; + + return 0; +} + +static int cs42l43_pll_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + int ret; + + mutex_lock(&cs42l43->pll_lock); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (priv->refclk_src == CS42L43_SYSCLK_MCLK) { + ret = clk_prepare_enable(priv->mclk); + if (ret) { + dev_err(priv->dev, "Failed to enable MCLK: %d\n", ret); + break; + } + } + + ret = cs42l43_enable_pll(priv); + break; + case SND_SOC_DAPM_POST_PMD: + ret = cs42l43_disable_pll(priv); + + if (priv->refclk_src == CS42L43_SYSCLK_MCLK) + clk_disable_unprepare(priv->mclk); + break; + default: + break; + } + + mutex_unlock(&cs42l43->pll_lock); + + return ret; +} + +static int cs42l43_dapm_wait_completion(struct completion *pmu, struct completion *pmd, + int event, int timeout_ms) +{ + unsigned long time_left; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + reinit_completion(pmu); + return 0; + case SND_SOC_DAPM_PRE_PMD: + reinit_completion(pmd); + return 0; + case SND_SOC_DAPM_POST_PMU: + time_left = wait_for_completion_timeout(pmu, msecs_to_jiffies(timeout_ms)); + break; + case SND_SOC_DAPM_POST_PMD: + time_left = wait_for_completion_timeout(pmd, msecs_to_jiffies(timeout_ms)); + break; + default: + return 0; + } + + if (!time_left) + return -ETIMEDOUT; + else + return 0; +} + +static int cs42l43_spkr_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + return cs42l43_dapm_wait_completion(&priv->spkr_startup, + &priv->spkr_shutdown, event, + CS42L43_SPK_TIMEOUT_MS); +} + +static int cs42l43_spkl_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + return cs42l43_dapm_wait_completion(&priv->spkl_startup, + &priv->spkl_shutdown, event, + CS42L43_SPK_TIMEOUT_MS); +} + +static int cs42l43_hp_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + unsigned int mask = 1 << w->shift; + unsigned int val = 0; + int ret; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + val = mask; + fallthrough; + case SND_SOC_DAPM_PRE_PMD: + priv->hp_ena &= ~mask; + priv->hp_ena |= val; + + ret = cs42l43_dapm_wait_completion(&priv->hp_startup, + &priv->hp_shutdown, event, + CS42L43_HP_TIMEOUT_MS); + if (ret) + return ret; + + if (!priv->load_detect_running) + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN8, + mask, val); + break; + case SND_SOC_DAPM_POST_PMU: + case SND_SOC_DAPM_POST_PMD: + if (priv->load_detect_running) + break; + + ret = cs42l43_dapm_wait_completion(&priv->hp_startup, + &priv->hp_shutdown, event, + CS42L43_HP_TIMEOUT_MS); + if (ret) + return ret; + break; + default: + break; + } + + return 0; +} + +static int cs42l43_mic_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + unsigned int reg, ramp, mute; + unsigned int *val; + int ret; + + switch (w->shift) { + case CS42L43_ADC1_EN_SHIFT: + case CS42L43_PDM1_DIN_L_EN_SHIFT: + reg = CS42L43_DECIM_VOL_CTRL_CH1_CH2; + ramp = CS42L43_DECIM1_VD_RAMP_MASK; + mute = CS42L43_DECIM1_MUTE_MASK; + val = &priv->decim_cache[0]; + break; + case CS42L43_ADC2_EN_SHIFT: + case CS42L43_PDM1_DIN_R_EN_SHIFT: + reg = CS42L43_DECIM_VOL_CTRL_CH1_CH2; + ramp = CS42L43_DECIM2_VD_RAMP_MASK; + mute = CS42L43_DECIM2_MUTE_MASK; + val = &priv->decim_cache[1]; + break; + case CS42L43_PDM2_DIN_L_EN_SHIFT: + reg = CS42L43_DECIM_VOL_CTRL_CH3_CH4; + ramp = CS42L43_DECIM3_VD_RAMP_MASK; + mute = CS42L43_DECIM3_MUTE_MASK; + val = &priv->decim_cache[2]; + break; + case CS42L43_PDM2_DIN_R_EN_SHIFT: + reg = CS42L43_DECIM_VOL_CTRL_CH3_CH4; + ramp = CS42L43_DECIM4_VD_RAMP_MASK; + mute = CS42L43_DECIM4_MUTE_MASK; + val = &priv->decim_cache[3]; + break; + default: + dev_err(priv->dev, "Invalid microphone shift: %d\n", w->shift); + return -EINVAL; + } + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + ret = regmap_read(cs42l43->regmap, reg, val); + if (ret) { + dev_err(priv->dev, + "Failed to cache decimator settings: %d\n", + ret); + return ret; + } + + regmap_update_bits(cs42l43->regmap, reg, mute | ramp, mute); + break; + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(cs42l43->regmap, reg, mute | ramp, *val); + break; + default: + break; + } + + return 0; +} + +static int cs42l43_adc_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + unsigned int mask = 1 << w->shift; + unsigned int val = 0; + int ret; + + ret = cs42l43_mic_ev(w, kcontrol, event); + if (ret) + return ret; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + val = mask; + fallthrough; + case SND_SOC_DAPM_PRE_PMD: + priv->adc_ena &= ~mask; + priv->adc_ena |= val; + + if (!priv->load_detect_running) + regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN3, + mask, val); + fallthrough; + default: + return 0; + } +} + +static const struct snd_soc_dapm_widget cs42l43_widgets[] = { + SND_SOC_DAPM_SUPPLY("PLL", SND_SOC_NOPM, 0, 0, cs42l43_pll_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_INPUT("ADC1_IN1_P"), + SND_SOC_DAPM_INPUT("ADC1_IN1_N"), + SND_SOC_DAPM_INPUT("ADC1_IN2_P"), + SND_SOC_DAPM_INPUT("ADC1_IN2_N"), + SND_SOC_DAPM_INPUT("ADC2_IN_P"), + SND_SOC_DAPM_INPUT("ADC2_IN_N"), + + SND_SOC_DAPM_INPUT("PDM1_DIN"), + SND_SOC_DAPM_INPUT("PDM2_DIN"), + + SND_SOC_DAPM_MUX("ADC1 Input", SND_SOC_NOPM, 0, 0, &cs42l43_adc1_input_ctl), + + SND_SOC_DAPM_PGA_E("ADC1", SND_SOC_NOPM, CS42L43_ADC1_EN_SHIFT, 0, NULL, 0, + cs42l43_adc_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_PGA_E("ADC2", SND_SOC_NOPM, CS42L43_ADC2_EN_SHIFT, 0, NULL, 0, + cs42l43_adc_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_PGA_E("PDM1L", CS42L43_BLOCK_EN3, CS42L43_PDM1_DIN_L_EN_SHIFT, + 0, NULL, 0, cs42l43_mic_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_E("PDM1R", CS42L43_BLOCK_EN3, CS42L43_PDM1_DIN_R_EN_SHIFT, + 0, NULL, 0, cs42l43_mic_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_E("PDM2L", CS42L43_BLOCK_EN3, CS42L43_PDM2_DIN_L_EN_SHIFT, + 0, NULL, 0, cs42l43_mic_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_E("PDM2R", CS42L43_BLOCK_EN3, CS42L43_PDM2_DIN_R_EN_SHIFT, + 0, NULL, 0, cs42l43_mic_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + + SND_SOC_DAPM_MUX("Decimator 1 Mode", SND_SOC_NOPM, 0, 0, + &cs42l43_dec_mode_ctl[0]), + SND_SOC_DAPM_MUX("Decimator 2 Mode", SND_SOC_NOPM, 0, 0, + &cs42l43_dec_mode_ctl[1]), + + SND_SOC_DAPM_PGA("Decimator 1", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Decimator 2", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Decimator 3", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Decimator 4", SND_SOC_NOPM, 0, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY_S("FSYNC", 0, CS42L43_ASP_CTRL, CS42L43_ASP_FSYNC_EN_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("BCLK", 1, CS42L43_ASP_CTRL, CS42L43_ASP_BCLK_EN_SHIFT, + 0, NULL, 0), + + SND_SOC_DAPM_AIF_OUT("ASPTX1", NULL, 0, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH1_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_OUT("ASPTX2", NULL, 1, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH2_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_OUT("ASPTX3", NULL, 2, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH3_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_OUT("ASPTX4", NULL, 3, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH4_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_OUT("ASPTX5", NULL, 4, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH5_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_OUT("ASPTX6", NULL, 5, + CS42L43_ASP_TX_EN, CS42L43_ASP_TX_CH6_EN_SHIFT, 0), + + SND_SOC_DAPM_AIF_IN("ASPRX1", NULL, 0, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH1_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_IN("ASPRX2", NULL, 1, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH2_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_IN("ASPRX3", NULL, 2, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH3_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_IN("ASPRX4", NULL, 3, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH4_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_IN("ASPRX5", NULL, 4, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH5_EN_SHIFT, 0), + SND_SOC_DAPM_AIF_IN("ASPRX6", NULL, 5, + CS42L43_ASP_RX_EN, CS42L43_ASP_RX_CH6_EN_SHIFT, 0), + + SND_SOC_DAPM_AIF_OUT("DP1TX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP1TX2", NULL, 1, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP1TX3", NULL, 2, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP1TX4", NULL, 3, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_OUT("DP2TX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP2TX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_OUT("DP3TX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP3TX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_OUT("DP4TX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP4TX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_IN("DP5RX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("DP5RX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_IN("DP6RX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("DP6RX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_AIF_IN("DP7RX1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("DP7RX2", NULL, 1, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_REGULATOR_SUPPLY("VDD_AMP", 0, 0), + + SND_SOC_DAPM_PGA_E("AMP1", CS42L43_BLOCK_EN10, CS42L43_AMP1_EN_SHIFT, 0, NULL, 0, + cs42l43_spkl_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("AMP2", CS42L43_BLOCK_EN10, CS42L43_AMP2_EN_SHIFT, 0, NULL, 0, + cs42l43_spkr_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_OUTPUT("AMP1_OUT_P"), + SND_SOC_DAPM_OUTPUT("AMP1_OUT_N"), + SND_SOC_DAPM_OUTPUT("AMP2_OUT_P"), + SND_SOC_DAPM_OUTPUT("AMP2_OUT_N"), + + SND_SOC_DAPM_PGA("SPDIF", CS42L43_BLOCK_EN11, CS42L43_SPDIF_EN_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("SPDIF_TX"), + + SND_SOC_DAPM_PGA_E("HP", SND_SOC_NOPM, CS42L43_HP_EN_SHIFT, 0, NULL, 0, + cs42l43_hp_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_OUTPUT("AMP3_OUT"), + SND_SOC_DAPM_OUTPUT("AMP4_OUT"), + + SND_SOC_DAPM_SIGGEN("Tone"), + SND_SOC_DAPM_SUPPLY("Tone Generator", CS42L43_BLOCK_EN9, CS42L43_TONE_EN_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_pga, "Tone 1", CS42L43_TONE_CH1_CTRL, + CS42L43_TONE_SEL_SHIFT, CS42L43_TONE_SEL_MASK, 0xA, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_pga, "Tone 2", CS42L43_TONE_CH2_CTRL, + CS42L43_TONE_SEL_SHIFT, CS42L43_TONE_SEL_MASK, 0xA, 0), + + SND_SOC_DAPM_SUPPLY("ISRC1", CS42L43_BLOCK_EN5, CS42L43_ISRC1_BANK_EN_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ISRC2", CS42L43_BLOCK_EN5, CS42L43_ISRC2_BANK_EN_SHIFT, + 0, NULL, 0), + + SND_SOC_DAPM_PGA("ISRC1INT2", CS42L43_ISRC1_CTRL, + CS42L43_ISRC_INT2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC1INT1", CS42L43_ISRC1_CTRL, + CS42L43_ISRC_INT1_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC1DEC2", CS42L43_ISRC1_CTRL, + CS42L43_ISRC_DEC2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC1DEC1", CS42L43_ISRC1_CTRL, + CS42L43_ISRC_DEC1_EN_SHIFT, 0, NULL, 0), + + SND_SOC_DAPM_PGA("ISRC2INT2", CS42L43_ISRC2_CTRL, + CS42L43_ISRC_INT2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC2INT1", CS42L43_ISRC2_CTRL, + CS42L43_ISRC_INT1_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC2DEC2", CS42L43_ISRC2_CTRL, + CS42L43_ISRC_DEC2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ISRC2DEC1", CS42L43_ISRC2_CTRL, + CS42L43_ISRC_DEC1_EN_SHIFT, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("ASRC_INT", CS42L43_BLOCK_EN4, + CS42L43_ASRC_INT_BANK_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ASRC_DEC", CS42L43_BLOCK_EN4, + CS42L43_ASRC_DEC_BANK_EN_SHIFT, 0, NULL, 0), + + SND_SOC_DAPM_PGA("ASRC_INT1", CS42L43_ASRC_INT_ENABLES, + CS42L43_ASRC_INT1_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_INT2", CS42L43_ASRC_INT_ENABLES, + CS42L43_ASRC_INT2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_INT3", CS42L43_ASRC_INT_ENABLES, + CS42L43_ASRC_INT3_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_INT4", CS42L43_ASRC_INT_ENABLES, + CS42L43_ASRC_INT4_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_DEC1", CS42L43_ASRC_DEC_ENABLES, + CS42L43_ASRC_DEC1_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_DEC2", CS42L43_ASRC_DEC_ENABLES, + CS42L43_ASRC_DEC2_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_DEC3", CS42L43_ASRC_DEC_ENABLES, + CS42L43_ASRC_DEC3_EN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("ASRC_DEC4", CS42L43_ASRC_DEC_ENABLES, + CS42L43_ASRC_DEC4_EN_SHIFT, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("EQ Clock", CS42L43_BLOCK_EN7, CS42L43_EQ_EN_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_PGA_E("EQ", CS42L43_START_EQZ0, CS42L43_START_FILTER_SHIFT, + 0, NULL, 0, cs42l43_eq_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + + SND_SOC_DAPM_SUPPLY("Mixer Core", CS42L43_BLOCK_EN6, CS42L43_MIXER_EN_SHIFT, + 0, NULL, 0), + CS42L43_DAPM_MUX("ASPTX1", asptx1), + CS42L43_DAPM_MUX("ASPTX2", asptx2), + CS42L43_DAPM_MUX("ASPTX3", asptx3), + CS42L43_DAPM_MUX("ASPTX4", asptx4), + CS42L43_DAPM_MUX("ASPTX5", asptx5), + CS42L43_DAPM_MUX("ASPTX6", asptx6), + + CS42L43_DAPM_MUX("DP1TX1", dp1tx1), + CS42L43_DAPM_MUX("DP1TX2", dp1tx2), + CS42L43_DAPM_MUX("DP1TX3", dp1tx3), + CS42L43_DAPM_MUX("DP1TX4", dp1tx4), + CS42L43_DAPM_MUX("DP2TX1", dp2tx1), + CS42L43_DAPM_MUX("DP2TX2", dp2tx2), + CS42L43_DAPM_MUX("DP3TX1", dp3tx1), + CS42L43_DAPM_MUX("DP3TX2", dp3tx2), + CS42L43_DAPM_MUX("DP4TX1", dp4tx1), + CS42L43_DAPM_MUX("DP4TX2", dp4tx2), + + CS42L43_DAPM_MUX("ASRC INT1", asrcint1), + CS42L43_DAPM_MUX("ASRC INT2", asrcint2), + CS42L43_DAPM_MUX("ASRC INT3", asrcint3), + CS42L43_DAPM_MUX("ASRC INT4", asrcint4), + CS42L43_DAPM_MUX("ASRC DEC1", asrcdec1), + CS42L43_DAPM_MUX("ASRC DEC2", asrcdec2), + CS42L43_DAPM_MUX("ASRC DEC3", asrcdec3), + CS42L43_DAPM_MUX("ASRC DEC4", asrcdec4), + + CS42L43_DAPM_MUX("ISRC1INT1", isrc1int1), + CS42L43_DAPM_MUX("ISRC1INT2", isrc1int2), + CS42L43_DAPM_MUX("ISRC1DEC1", isrc1dec1), + CS42L43_DAPM_MUX("ISRC1DEC2", isrc1dec2), + CS42L43_DAPM_MUX("ISRC2INT1", isrc2int1), + CS42L43_DAPM_MUX("ISRC2INT2", isrc2int2), + CS42L43_DAPM_MUX("ISRC2DEC1", isrc2dec1), + CS42L43_DAPM_MUX("ISRC2DEC2", isrc2dec2), + + CS42L43_DAPM_MUX("SPDIF1", spdif1), + CS42L43_DAPM_MUX("SPDIF2", spdif2), + + CS42L43_DAPM_MIXER("EQ1", eq1), + CS42L43_DAPM_MIXER("EQ2", eq2), + + CS42L43_DAPM_MIXER("Speaker L", amp1), + CS42L43_DAPM_MIXER("Speaker R", amp2), + + CS42L43_DAPM_MIXER("Headphone L", amp3), + CS42L43_DAPM_MIXER("Headphone R", amp4), +}; + +static const struct snd_soc_dapm_route cs42l43_routes[] = { + { "ADC1_IN1_P", NULL, "PLL" }, + { "ADC1_IN1_N", NULL, "PLL" }, + { "ADC1_IN2_P", NULL, "PLL" }, + { "ADC1_IN2_N", NULL, "PLL" }, + { "ADC2_IN_P", NULL, "PLL" }, + { "ADC2_IN_N", NULL, "PLL" }, + { "PDM1_DIN", NULL, "PLL" }, + { "PDM2_DIN", NULL, "PLL" }, + { "AMP1_OUT_P", NULL, "PLL" }, + { "AMP1_OUT_N", NULL, "PLL" }, + { "AMP2_OUT_P", NULL, "PLL" }, + { "AMP2_OUT_N", NULL, "PLL" }, + { "SPDIF_TX", NULL, "PLL" }, + { "HP", NULL, "PLL" }, + { "AMP3_OUT", NULL, "PLL" }, + { "AMP4_OUT", NULL, "PLL" }, + { "Tone 1", NULL, "PLL" }, + { "Tone 2", NULL, "PLL" }, + { "ASP Playback", NULL, "PLL" }, + { "ASP Capture", NULL, "PLL" }, + { "DP1 Capture", NULL, "PLL" }, + { "DP2 Capture", NULL, "PLL" }, + { "DP3 Capture", NULL, "PLL" }, + { "DP4 Capture", NULL, "PLL" }, + { "DP5 Playback", NULL, "PLL" }, + { "DP6 Playback", NULL, "PLL" }, + { "DP7 Playback", NULL, "PLL" }, + + { "ADC1 Input", "IN1", "ADC1_IN1_P" }, + { "ADC1 Input", "IN1", "ADC1_IN1_N" }, + { "ADC1 Input", "IN2", "ADC1_IN2_P" }, + { "ADC1 Input", "IN2", "ADC1_IN2_N" }, + + { "ADC1", NULL, "ADC1 Input" }, + { "ADC2", NULL, "ADC2_IN_P" }, + { "ADC2", NULL, "ADC2_IN_N" }, + + { "PDM1L", NULL, "PDM1_DIN" }, + { "PDM1R", NULL, "PDM1_DIN" }, + { "PDM2L", NULL, "PDM2_DIN" }, + { "PDM2R", NULL, "PDM2_DIN" }, + + { "Decimator 1 Mode", "PDM", "PDM1L" }, + { "Decimator 1 Mode", "ADC", "ADC1" }, + { "Decimator 2 Mode", "PDM", "PDM1R" }, + { "Decimator 2 Mode", "ADC", "ADC2" }, + + { "Decimator 1", NULL, "Decimator 1 Mode" }, + { "Decimator 2", NULL, "Decimator 2 Mode" }, + { "Decimator 3", NULL, "PDM2L" }, + { "Decimator 4", NULL, "PDM2R" }, + + { "ASP Capture", NULL, "ASPTX1" }, + { "ASP Capture", NULL, "ASPTX2" }, + { "ASP Capture", NULL, "ASPTX3" }, + { "ASP Capture", NULL, "ASPTX4" }, + { "ASP Capture", NULL, "ASPTX5" }, + { "ASP Capture", NULL, "ASPTX6" }, + { "ASPTX1", NULL, "BCLK" }, + { "ASPTX2", NULL, "BCLK" }, + { "ASPTX3", NULL, "BCLK" }, + { "ASPTX4", NULL, "BCLK" }, + { "ASPTX5", NULL, "BCLK" }, + { "ASPTX6", NULL, "BCLK" }, + + { "ASPRX1", NULL, "ASP Playback" }, + { "ASPRX2", NULL, "ASP Playback" }, + { "ASPRX3", NULL, "ASP Playback" }, + { "ASPRX4", NULL, "ASP Playback" }, + { "ASPRX5", NULL, "ASP Playback" }, + { "ASPRX6", NULL, "ASP Playback" }, + { "ASPRX1", NULL, "BCLK" }, + { "ASPRX2", NULL, "BCLK" }, + { "ASPRX3", NULL, "BCLK" }, + { "ASPRX4", NULL, "BCLK" }, + { "ASPRX5", NULL, "BCLK" }, + { "ASPRX6", NULL, "BCLK" }, + + { "DP1 Capture", NULL, "DP1TX1" }, + { "DP1 Capture", NULL, "DP1TX2" }, + { "DP1 Capture", NULL, "DP1TX3" }, + { "DP1 Capture", NULL, "DP1TX4" }, + + { "DP2 Capture", NULL, "DP2TX1" }, + { "DP2 Capture", NULL, "DP2TX2" }, + + { "DP3 Capture", NULL, "DP3TX1" }, + { "DP3 Capture", NULL, "DP3TX2" }, + + { "DP4 Capture", NULL, "DP4TX1" }, + { "DP4 Capture", NULL, "DP4TX2" }, + + { "DP5RX1", NULL, "DP5 Playback" }, + { "DP5RX2", NULL, "DP5 Playback" }, + + { "DP6RX1", NULL, "DP6 Playback" }, + { "DP6RX2", NULL, "DP6 Playback" }, + + { "DP7RX1", NULL, "DP7 Playback" }, + { "DP7RX2", NULL, "DP7 Playback" }, + + { "AMP1", NULL, "VDD_AMP" }, + { "AMP2", NULL, "VDD_AMP" }, + + { "AMP1_OUT_P", NULL, "AMP1" }, + { "AMP1_OUT_N", NULL, "AMP1" }, + { "AMP2_OUT_P", NULL, "AMP2" }, + { "AMP2_OUT_N", NULL, "AMP2" }, + + { "SPDIF_TX", NULL, "SPDIF" }, + + { "AMP3_OUT", NULL, "HP" }, + { "AMP4_OUT", NULL, "HP" }, + + { "Tone 1", NULL, "Tone" }, + { "Tone 1", NULL, "Tone Generator" }, + { "Tone 2", NULL, "Tone" }, + { "Tone 2", NULL, "Tone Generator" }, + + { "ISRC1INT2", NULL, "ISRC1" }, + { "ISRC1INT1", NULL, "ISRC1" }, + { "ISRC1DEC2", NULL, "ISRC1" }, + { "ISRC1DEC1", NULL, "ISRC1" }, + + { "ISRC2INT2", NULL, "ISRC2" }, + { "ISRC2INT1", NULL, "ISRC2" }, + { "ISRC2DEC2", NULL, "ISRC2" }, + { "ISRC2DEC1", NULL, "ISRC2" }, + + { "ASRC_INT1", NULL, "ASRC_INT" }, + { "ASRC_INT2", NULL, "ASRC_INT" }, + { "ASRC_INT3", NULL, "ASRC_INT" }, + { "ASRC_INT4", NULL, "ASRC_INT" }, + { "ASRC_DEC1", NULL, "ASRC_DEC" }, + { "ASRC_DEC2", NULL, "ASRC_DEC" }, + { "ASRC_DEC3", NULL, "ASRC_DEC" }, + { "ASRC_DEC4", NULL, "ASRC_DEC" }, + + { "EQ", NULL, "EQ Clock" }, + + CS42L43_MUX_ROUTES("ASPTX1", "ASPTX1"), + CS42L43_MUX_ROUTES("ASPTX2", "ASPTX2"), + CS42L43_MUX_ROUTES("ASPTX3", "ASPTX3"), + CS42L43_MUX_ROUTES("ASPTX4", "ASPTX4"), + CS42L43_MUX_ROUTES("ASPTX5", "ASPTX5"), + CS42L43_MUX_ROUTES("ASPTX6", "ASPTX6"), + + CS42L43_MUX_ROUTES("DP1TX1", "DP1TX1"), + CS42L43_MUX_ROUTES("DP1TX2", "DP1TX2"), + CS42L43_MUX_ROUTES("DP1TX3", "DP1TX3"), + CS42L43_MUX_ROUTES("DP1TX4", "DP1TX4"), + CS42L43_MUX_ROUTES("DP2TX1", "DP2TX1"), + CS42L43_MUX_ROUTES("DP2TX2", "DP2TX2"), + CS42L43_MUX_ROUTES("DP3TX1", "DP3TX1"), + CS42L43_MUX_ROUTES("DP3TX2", "DP3TX2"), + CS42L43_MUX_ROUTES("DP4TX1", "DP4TX1"), + CS42L43_MUX_ROUTES("DP4TX2", "DP4TX2"), + + CS42L43_MUX_ROUTES("ASRC INT1", "ASRC_INT1"), + CS42L43_MUX_ROUTES("ASRC INT2", "ASRC_INT2"), + CS42L43_MUX_ROUTES("ASRC INT3", "ASRC_INT3"), + CS42L43_MUX_ROUTES("ASRC INT4", "ASRC_INT4"), + CS42L43_MUX_ROUTES("ASRC DEC1", "ASRC_DEC1"), + CS42L43_MUX_ROUTES("ASRC DEC2", "ASRC_DEC2"), + CS42L43_MUX_ROUTES("ASRC DEC3", "ASRC_DEC3"), + CS42L43_MUX_ROUTES("ASRC DEC4", "ASRC_DEC4"), + + CS42L43_MUX_ROUTES("ISRC1INT1", "ISRC1INT1"), + CS42L43_MUX_ROUTES("ISRC1INT2", "ISRC1INT2"), + CS42L43_MUX_ROUTES("ISRC1DEC1", "ISRC1DEC1"), + CS42L43_MUX_ROUTES("ISRC1DEC2", "ISRC1DEC2"), + CS42L43_MUX_ROUTES("ISRC2INT1", "ISRC2INT1"), + CS42L43_MUX_ROUTES("ISRC2INT2", "ISRC2INT2"), + CS42L43_MUX_ROUTES("ISRC2DEC1", "ISRC2DEC1"), + CS42L43_MUX_ROUTES("ISRC2DEC2", "ISRC2DEC2"), + + CS42L43_MUX_ROUTES("SPDIF1", "SPDIF"), + CS42L43_MUX_ROUTES("SPDIF2", "SPDIF"), + + CS42L43_MIXER_ROUTES("EQ1", "EQ"), + CS42L43_MIXER_ROUTES("EQ2", "EQ"), + + CS42L43_MIXER_ROUTES("Speaker L", "AMP1"), + CS42L43_MIXER_ROUTES("Speaker R", "AMP2"), + + CS42L43_MIXER_ROUTES("Headphone L", "HP"), + CS42L43_MIXER_ROUTES("Headphone R", "HP"), +}; + +static int cs42l43_set_sysclk(struct snd_soc_component *component, int clk_id, + int src, unsigned int freq, int dir) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + int ret; + + mutex_lock(&cs42l43->pll_lock); + ret = cs42l43_set_pll(priv, src, freq); + mutex_unlock(&cs42l43->pll_lock); + + return ret; +} + +static int cs42l43_component_probe(struct snd_soc_component *component) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + struct cs42l43 *cs42l43 = priv->core; + + snd_soc_component_init_regmap(component, cs42l43->regmap); + + cs42l43_mask_to_slots(priv, CS42L43_DEFAULT_SLOTS, priv->tx_slots); + cs42l43_mask_to_slots(priv, CS42L43_DEFAULT_SLOTS, priv->rx_slots); + + priv->component = component; + priv->constraint = cs42l43_constraint; + + return 0; +} + +static const struct snd_soc_component_driver cs42l43_component_drv = { + .name = "cs42l43-codec", + + .probe = cs42l43_component_probe, + .set_sysclk = cs42l43_set_sysclk, + .set_jack = cs42l43_set_jack, + + .endianness = 1, + + .controls = cs42l43_controls, + .num_controls = ARRAY_SIZE(cs42l43_controls), + .dapm_widgets = cs42l43_widgets, + .num_dapm_widgets = ARRAY_SIZE(cs42l43_widgets), + .dapm_routes = cs42l43_routes, + .num_dapm_routes = ARRAY_SIZE(cs42l43_routes), +}; + +struct cs42l43_irq { + unsigned int irq; + const char *name; + irq_handler_t handler; +}; + +static const struct cs42l43_irq cs42l43_irqs[] = { + { CS42L43_PLL_LOST_LOCK, "pll lost lock", cs42l43_pll_lost_lock }, + { CS42L43_PLL_READY, "pll ready", cs42l43_pll_ready }, + { CS42L43_HP_STARTUP_DONE, "hp startup", cs42l43_hp_startup }, + { CS42L43_HP_SHUTDOWN_DONE, "hp shutdown", cs42l43_hp_shutdown }, + { CS42L43_HSDET_DONE, "type detect", cs42l43_type_detect }, + { CS42L43_TIPSENSE_UNPLUG_PDET, "tip sense unplug", cs42l43_tip_sense }, + { CS42L43_TIPSENSE_PLUG_PDET, "tip sense plug", cs42l43_tip_sense }, + { CS42L43_DC_DETECT1_TRUE, "button press", cs42l43_button_press }, + { CS42L43_DC_DETECT1_FALSE, "button release", cs42l43_button_release }, + { CS42L43_AMP2_CLK_STOP_FAULT, "spkr clock stop", cs42l43_spkr_clock_stop }, + { CS42L43_AMP1_CLK_STOP_FAULT, "spkl clock stop", cs42l43_spkl_clock_stop }, + { CS42L43_AMP2_VDDSPK_FAULT, "spkr brown out", cs42l43_spkr_brown_out }, + { CS42L43_AMP1_VDDSPK_FAULT, "spkl brown out", cs42l43_spkl_brown_out }, + { CS42L43_AMP2_SHUTDOWN_DONE, "spkr shutdown", cs42l43_spkr_shutdown }, + { CS42L43_AMP1_SHUTDOWN_DONE, "spkl shutdown", cs42l43_spkl_shutdown }, + { CS42L43_AMP2_STARTUP_DONE, "spkr startup", cs42l43_spkr_startup }, + { CS42L43_AMP1_STARTUP_DONE, "spkl startup", cs42l43_spkl_startup }, + { CS42L43_AMP2_THERM_SHDN, "spkr thermal shutdown", cs42l43_spkr_therm_shutdown }, + { CS42L43_AMP1_THERM_SHDN, "spkl thermal shutdown", cs42l43_spkl_therm_shutdown }, + { CS42L43_AMP2_THERM_WARN, "spkr thermal warning", cs42l43_spkr_therm_warm }, + { CS42L43_AMP1_THERM_WARN, "spkl thermal warning", cs42l43_spkl_therm_warm }, + { CS42L43_AMP2_SCDET, "spkr short circuit", cs42l43_spkr_sc_detect }, + { CS42L43_AMP1_SCDET, "spkl short circuit", cs42l43_spkl_sc_detect }, + { CS42L43_HP_ILIMIT, "hp ilimit", cs42l43_hp_ilimit }, + { CS42L43_HP_LOADDET_DONE, "load detect done", cs42l43_load_detect }, +}; + +static irqreturn_t cs42l43_request_irq(struct cs42l43_codec *priv, + struct irq_domain *dom, const char * const name, + unsigned int irq, irq_handler_t handler) +{ + int ret; + + ret = irq_create_mapping(dom, irq); + if (ret < 0) { + dev_err(priv->dev, "Failed to map IRQ %s: %d\n", name, ret); + return ret; + } + + dev_dbg(priv->dev, "Request IRQ %d for %s\n", ret, name); + + ret = devm_request_threaded_irq(priv->dev, ret, NULL, handler, IRQF_ONESHOT, + name, priv); + if (ret) { + dev_err(priv->dev, "Failed to request IRQ %s: %d\n", name, ret); + return ret; + } + + return 0; +} + +static int cs42l43_shutter_irq(struct cs42l43_codec *priv, + struct irq_domain *dom, unsigned int shutter, + const char * const open_name, + const char * const close_name, + irq_handler_t handler) +{ + unsigned int open_irq, close_irq; + int ret; + + switch (shutter) { + case 0x1: + dev_warn(priv->dev, "Manual shutters, notifications not available\n"); + return 0; + case 0x2: + open_irq = CS42L43_GPIO1_RISE; + close_irq = CS42L43_GPIO1_FALL; + break; + case 0x4: + open_irq = CS42L43_GPIO2_RISE; + close_irq = CS42L43_GPIO2_FALL; + break; + case 0x8: + open_irq = CS42L43_GPIO3_RISE; + close_irq = CS42L43_GPIO3_FALL; + break; + default: + return 0; + } + + ret = cs42l43_request_irq(priv, dom, close_name, close_irq, handler); + if (ret) + return ret; + + return cs42l43_request_irq(priv, dom, open_name, open_irq, handler); +} + +static int cs42l43_codec_probe(struct platform_device *pdev) +{ + struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); + struct cs42l43_codec *priv; + struct irq_domain *dom; + unsigned int val; + int i, ret; + + dom = irq_find_matching_fwnode(dev_fwnode(cs42l43->dev), DOMAIN_BUS_ANY); + if (!dom) + return -EPROBE_DEFER; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + priv->core = cs42l43; + + platform_set_drvdata(pdev, priv); + + mutex_init(&priv->jack_lock); + mutex_init(&priv->spk_vu_lock); + + init_completion(&priv->hp_startup); + init_completion(&priv->hp_shutdown); + init_completion(&priv->spkr_shutdown); + init_completion(&priv->spkl_shutdown); + init_completion(&priv->spkr_startup); + init_completion(&priv->spkl_startup); + init_completion(&priv->pll_ready); + init_completion(&priv->type_detect); + init_completion(&priv->load_detect); + + INIT_DELAYED_WORK(&priv->tip_sense_work, cs42l43_tip_sense_work); + INIT_DELAYED_WORK(&priv->bias_sense_timeout, cs42l43_bias_sense_timeout); + + pm_runtime_set_autosuspend_delay(priv->dev, 100); + pm_runtime_use_autosuspend(priv->dev); + pm_runtime_set_active(priv->dev); + pm_runtime_get_noresume(priv->dev); + pm_runtime_enable(priv->dev); + + for (i = 0; i < ARRAY_SIZE(cs42l43_irqs); i++) { + ret = cs42l43_request_irq(priv, dom, cs42l43_irqs[i].name, + cs42l43_irqs[i].irq, cs42l43_irqs[i].handler); + if (ret) + goto err_pm; + } + + ret = regmap_read(cs42l43->regmap, CS42L43_SHUTTER_CONTROL, &val); + if (ret) { + dev_err(priv->dev, "Failed to check shutter source: %d\n", ret); + goto err_pm; + } + + ret = cs42l43_shutter_irq(priv, dom, val & CS42L43_MIC_SHUTTER_CFG_MASK, + "mic shutter open", "mic shutter close", + cs42l43_mic_shutter); + if (ret) + goto err_pm; + + ret = cs42l43_shutter_irq(priv, dom, (val & CS42L43_SPK_SHUTTER_CFG_MASK) >> + CS42L43_SPK_SHUTTER_CFG_SHIFT, + "spk shutter open", "spk shutter close", + cs42l43_spk_shutter); + if (ret) + goto err_pm; + + // Don't use devm as we need to get against the MFD device + priv->mclk = clk_get_optional(cs42l43->dev, "mclk"); + if (IS_ERR(priv->mclk)) { + ret = PTR_ERR(priv->mclk); + dev_err(priv->dev, "Failed to get mclk: %d\n", ret); + goto err_pm; + } + + ret = devm_snd_soc_register_component(priv->dev, &cs42l43_component_drv, + cs42l43_dais, ARRAY_SIZE(cs42l43_dais)); + if (ret) { + dev_err(priv->dev, "Failed to register component: %d\n", ret); + goto err_clk; + } + + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + + return 0; + +err_clk: + clk_put(priv->mclk); +err_pm: + pm_runtime_put_sync(priv->dev); + pm_runtime_disable(priv->dev); + + return ret; +} + +static int cs42l43_codec_remove(struct platform_device *pdev) +{ + struct cs42l43_codec *priv = platform_get_drvdata(pdev); + + clk_put(priv->mclk); + pm_runtime_disable(priv->dev); + + return 0; +} + +static int __maybe_unused cs42l43_codec_runtime_resume(struct device *dev) +{ + struct cs42l43_codec *priv = dev_get_drvdata(dev); + + dev_dbg(priv->dev, "Runtime resume\n"); + + // Toggle the speaker volume update incase the speaker volume was synced + cs42l43_spk_vu_sync(priv); + + return 0; +} + +static const struct dev_pm_ops cs42l43_codec_pm_ops = { + SET_RUNTIME_PM_OPS(NULL, cs42l43_codec_runtime_resume, NULL) +}; + +static struct platform_driver cs42l43_codec_driver = { + .driver = { + .name = "cs42l43-codec", + .pm = &cs42l43_codec_pm_ops, + }, + + .probe = cs42l43_codec_probe, + .remove = cs42l43_codec_remove, +}; +module_platform_driver(cs42l43_codec_driver); + +MODULE_IMPORT_NS(SND_SOC_CS42L43); + +MODULE_DESCRIPTION("CS42L43 CODEC Driver"); +MODULE_AUTHOR("Charles Keepax ckeepax@opensource.cirrus.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cs42l43-codec"); diff --git a/sound/soc/codecs/cs42l43.h b/sound/soc/codecs/cs42l43.h new file mode 100644 index 0000000000000..6129660f8acf3 --- /dev/null +++ b/sound/soc/codecs/cs42l43.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CS42L43 CODEC driver internal data + * + * Copyright (C) 2022-2023 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/types.h> +#include <sound/cs42l43.h> +#include <sound/pcm.h> +#include <sound/soc-jack.h> + +#ifndef CS42L43_ASOC_INT_H +#define CS42L43_ASOC_INT_H + +#define CS42L43_INTERNAL_SYSCLK 24576000 +#define CS42L43_DEFAULT_SLOTS 0x3F + +#define CS42L43_PLL_TIMEOUT_MS 200 +#define CS42L43_SPK_TIMEOUT_MS 100 +#define CS42L43_HP_TIMEOUT_MS 2000 +#define CS42L43_LOAD_TIMEOUT_MS 1000 + +#define CS42L43_ASP_MAX_CHANNELS 6 +#define CS42L43_N_EQ_COEFFS 15 + +struct cs42l43_codec { + struct device *dev; + struct cs42l43 *core; + struct snd_soc_component *component; + + struct clk *mclk; + + int n_slots; + int slot_width; + int tx_slots[CS42L43_ASP_MAX_CHANNELS]; + int rx_slots[CS42L43_ASP_MAX_CHANNELS]; + struct snd_pcm_hw_constraint_list constraint; + + u32 eq_coeffs[CS42L43_N_EQ_COEFFS]; + + unsigned int refclk_src; + unsigned int refclk_freq; + struct completion pll_ready; + + unsigned int decim_cache[4]; + unsigned int adc_ena; + unsigned int hp_ena; + + struct completion hp_startup; + struct completion hp_shutdown; + struct completion spkr_shutdown; + struct completion spkl_shutdown; + struct completion spkr_startup; + struct completion spkl_startup; + // Lock to ensure speaker VU updates don't clash + struct mutex spk_vu_lock; + + // Lock for all jack detect operations + struct mutex jack_lock; + struct snd_soc_jack *jack_hp; + struct cs42l43_jack_pdata jack_pdata; + + struct delayed_work tip_sense_work; + struct delayed_work bias_sense_timeout; + struct completion type_detect; + struct completion load_detect; + + bool load_detect_running; + bool button_detect_running; + bool jack_present; + int jack_override; +}; + +#if IS_REACHABLE(CONFIG_SND_SOC_CS42L43_SDW) + +int cs42l43_sdw_add_peripheral(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai); +int cs42l43_sdw_remove_peripheral(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai); +int cs42l43_sdw_set_stream(struct snd_soc_dai *dai, void *sdw_stream, int direction); + +#else + +static inline int cs42l43_sdw_add_peripheral(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + return -EINVAL; +} + +#define cs42l43_sdw_remove_peripheral NULL +#define cs42l43_sdw_set_stream NULL + +#endif + +int cs42l43_set_jack(struct snd_soc_component *component, + struct snd_soc_jack *jack, void *d); +void cs42l43_bias_sense_timeout(struct work_struct *work); +void cs42l43_tip_sense_work(struct work_struct *work); +irqreturn_t cs42l43_button_press(int irq, void *data); +irqreturn_t cs42l43_button_release(int irq, void *data); +irqreturn_t cs42l43_tip_sense(int irq, void *data); +int cs42l43_jack_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int cs42l43_jack_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); + +extern const struct soc_enum cs42l43_jack_enum; + +#endif /* CS42L43_ASOC_INT_H */
On Fri, 12 May 2023 13:28:28 +0100, Charles Keepax wrote:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused SoundWire CODEC. Some supporting work is included in the chain, including adding an ASoC control notification helper function and adding support for IRQs generated by the in-band SoundWire alert mechanism.
The chain is currently based of v6.4-rc1 because I am not 100% sure which tree we want to send everything through. The CODEC support has a build dependency on both the SoundWire change and the ASoC soc-component change.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[02/10] ASoC: soc-component: Add notify control helper function commit: ace9ed54bd874f2c63723b13b1747f6463e2587e [03/10] ASoC: ak4118: Update to use new component control notify helper commit: 476d942e50d4f22d8621a18612dd6cfbf0a5d1d9 [04/10] ASoC: wm_adsp: Update to use new component control notify helepr commit: 95d06196c83c9dc1b6fd6cda07a1bac54ca2d568
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (9)
-
Andy Shevchenko -
andy.shevchenkoļ¼ gmail.com
-
Charles Keepax -
Krzysztof Kozlowski -
Lee Jones -
Marc Zyngier -
Mark Brown -
Pierre-Louis Bossart -
Richard Fitzgerald