The driver only supports I2C so doesn't need to do things conditionally.

Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/tlv320aic3x.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 14cb553..2e2bf18 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1481,7 +1481,6 @@ static struct snd_soc_codec_driver soc_codec_dev_aic3x = { .resume = aic3x_resume, };

-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * AIC3X 2 wire address can be up to 4 devices with device addresses * 0x18, 0x19, 0x1A, 0x1B @@ -1548,27 +1547,22 @@ static struct i2c_driver aic3x_i2c_driver = { .remove = aic3x_i2c_remove, .id_table = aic3x_i2c_id, }; -#endif

static int __init aic3x_modinit(void) { int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&aic3x_i2c_driver); if (ret != 0) { printk(KERN_ERR "Failed to register TLV320AIC3x I2C driver: %d\n", ret); } -#endif return ret; } module_init(aic3x_modinit);

static void __exit aic3x_exit(void) { -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&aic3x_i2c_driver); -#endif } module_exit(aic3x_exit);