[alsa-devel] [PATCH 1/2] ALSA: ASoc: TLV320AIC3X: ad SPI and clock on GPIO2 or BCLK
![](https://secure.gravatar.com/avatar/0e61e149296fd6c9784a02e5dd12bcf2.jpg?s=120&d=mm&r=g)
Hi, this patch ads SPI communication for codecs TLV320AIC3X and clock input on GPIO2 or BCLK. Tested on TLV320AIC3106 and AT91SAM9260. TODO: Set the model in SPI probe the right way. I don't know how. This codec communicates on SPI in 1st byte: 7 MSB is register address, 1 LSB is read/write, 2nd byte data. For this reason there is new functions in soc-cache.c snd_soc_7_8_*.
Kernel version: 2.6.38 Signed-off-by: Jiri Prchal jiri.prchal@aksignal.cz ---
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/Kconfig /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/Kconfig --- linux-2.6.38-vanilla/sound/soc/codecs/Kconfig 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/Kconfig 2011-03-17 08:37:14.997500191 +0100 @@ -37,7 +37,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TLV320AIC23 if I2C select SND_SOC_TLV320AIC26 if SPI_MASTER - select SND_SOC_TLV320AIC3X if I2C + select SND_SOC_TLV320AIC3X if SND_SOC_I2C_AND_SPI select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE @@ -118,7 +118,7 @@ config SND_SOC_AD1980
config SND_SOC_AD73311 tristate - + config SND_SOC_ADS117X tristate
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.c /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/tlv320aic3x.c --- linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.c 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/tlv320aic3x.c 2011-03-24 09:34:58.769370117 +0100 @@ -2,7 +2,9 @@ * ALSA SoC TLV320AIC3X codec driver * * Author: Vladimir Barinov, vbarinov@embeddedalley.com + * Jiri Prchal, <jiri.prchal@aksignal.cz * Copyright: (C) 2007 MontaVista Software, Inc., source@mvista.com + * (C) 2011 AK signal Brno * * Based on sound/soc/codecs/wm8753.c by Liam Girdwood * @@ -42,6 +44,7 @@ #include <linux/regulator/consumer.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/spi/spi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -984,6 +987,13 @@ static int aic3x_set_dai_sysclk(struct s { struct snd_soc_codec *codec = codec_dai->codec; struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); + u8 data; + + /* set external clock on GPIO2 or BCLK */ + data = snd_soc_read(codec, AIC3X_CLKGEN_CTRL_REG); + data &= 0x0f; + data |= ((clk_id << PLLCLK_IN_SHIFT) | (clk_id << CLKDIV_IN_SHIFT)); + snd_soc_write(codec, AIC3X_CLKGEN_CTRL_REG, data);
aic3x->sysclk = freq; return 0; @@ -1371,9 +1381,12 @@ static int aic3x_probe(struct snd_soc_co aic3x->codec = codec; codec->dapm.idle_bias_off = 1;
- ret = snd_soc_codec_set_cache_io(codec, 8, 8, aic3x->control_type); + if (aic3x->control_type == SND_SOC_I2C) + ret = snd_soc_codec_set_cache_io(codec, 8, 8, aic3x->control_type); + else + ret = snd_soc_codec_set_cache_io(codec, 7, 8, aic3x->control_type); if (ret != 0) { - dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + dev_err(codec->dev, "failed to set cache I/O: %d\n", ret); return ret; }
@@ -1472,6 +1485,54 @@ static struct snd_soc_codec_driver soc_c .resume = aic3x_resume, };
+#if defined(CONFIG_SPI_MASTER) +static int aic3x_spi_probe(struct spi_device *spi) +{ + struct aic3x_pdata *pdata = spi->dev.platform_data; + struct aic3x_priv *aic3x; + int ret; + + aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL); + if (aic3x == NULL) { + dev_err(&spi->dev, "failed to create private data\n"); + return -ENOMEM; + } + + aic3x->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, aic3x); + + if (pdata) { + aic3x->gpio_reset = pdata->gpio_reset; + aic3x->setup = pdata->setup; + } else { + aic3x->gpio_reset = -1; + } + + aic3x->model = AIC3X_MODEL_3X; + + ret = snd_soc_register_codec(&spi->dev, &soc_codec_dev_aic3x, &aic3x_dai, 1); + if (ret < 0) + kfree(aic3x); + return ret; +} + +static int __devexit aic3x_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver aic3x_spi_driver = { + .driver = { + .name = "tlv320aic3x-codec", + .owner = THIS_MODULE, + }, + .probe = aic3x_spi_probe, + .remove = __devexit_p(aic3x_spi_remove), +}; +#endif /* CONFIG_SPI_MASTER */ + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * AIC3X 2 wire address can be up to 4 devices with device addresses @@ -1557,6 +1618,13 @@ static int __init aic3x_modinit(void) ret); } #endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&aic3x_spi_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register AIC3X SPI driver: %d\n", + ret); + } +#endif return ret; } module_init(aic3x_modinit); @@ -1566,6 +1634,9 @@ static void __exit aic3x_exit(void) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&aic3x_i2c_driver); #endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&aic3x_spi_driver); +#endif } module_exit(aic3x_exit);
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.h /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/tlv320aic3x.h --- linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.h 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/codecs/tlv320aic3x.h 2011-03-22 13:37:54.751566089 +0100 @@ -178,6 +178,13 @@ #define PLL_CLKIN_SHIFT 4 #define MCLK_SOURCE 0x0 #define PLL_CLKDIV_SHIFT 0 +#define PLLCLK_IN_SHIFT 4 +#define CLKDIV_IN_SHIFT 6 +/* clock in source */ +#define CLKIN_MCLK 0 +#define CLKIN_GPIO2 1 +#define CLKIN_BCLK 2 +
/* Software reset register bits */ #define SOFT_RESET 0x80 diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/soc-cache.c /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/soc-cache.c --- linux-2.6.38-vanilla/sound/soc/soc-cache.c 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/soc-cache.c 2011-03-24 09:23:00.984373772 +0100 @@ -99,6 +99,58 @@ static int snd_soc_4_12_spi_write(void * #define snd_soc_4_12_spi_write NULL #endif
+/* special functions for codecs with 7 bit register address and LSB read/write (like TLV320AIC3X) */ +static unsigned int snd_soc_7_8_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + int ret; + unsigned int val; + + if (reg >= codec->driver->reg_cache_size || + snd_soc_codec_volatile_register(codec, reg)) { + if (codec->cache_only) + return -1; + + BUG_ON(!codec->hw_read); + return codec->hw_read(codec, ((reg << 1) | 1)); + } + + ret = snd_soc_cache_read(codec, reg, &val); + if (ret < 0) + return -1; + return val; +} + +static int snd_soc_7_8_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + int ret; + + data[0] = (reg << 1); + data[1] = value; + + if (!snd_soc_codec_volatile_register(codec, reg) && + reg < codec->driver->reg_cache_size) { + ret = snd_soc_cache_write(codec, reg, value); + if (ret < 0) + return -1; + } + + if (codec->cache_only) { + codec->cache_sync = 1; + return 0; + } + + ret = codec->hw_write(codec->control_data, data, 2); + if (ret == 2) + return 0; + if (ret < 0) + return ret; + else + return -EIO; +} + static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec, unsigned int reg) { @@ -661,6 +713,11 @@ static struct { .spi_write = snd_soc_4_12_spi_write, }, { + .addr_bits = 7, .data_bits = 8, + .write = snd_soc_7_8_write, .read = snd_soc_7_8_read, + .spi_write = snd_soc_8_8_spi_write, + }, + { .addr_bits = 7, .data_bits = 9, .write = snd_soc_7_9_write, .read = snd_soc_7_9_read, .spi_write = snd_soc_7_9_spi_write,
![](https://secure.gravatar.com/avatar/d28dfe03ea754ea1153719f4ced12649.jpg?s=120&d=mm&r=g)
On Thu, Mar 24, 2011 at 11:20:45AM +0100, Prchal Ji?? wrote:
Hi, this patch ads SPI communication for codecs TLV320AIC3X and clock input on GPIO2 or BCLK. Tested on TLV320AIC3106 and AT91SAM9260. TODO: Set the model in SPI probe the right way. I don't know how.
Register two SPI drivers with different names.
This codec communicates on SPI in 1st byte: 7 MSB is register address, 1 LSB is read/write, 2nd byte data. For this reason there is new functions in soc-cache.c snd_soc_7_8_*.
This looks mostly good but there's some cleanups needed, mostly from extra stuff which snuck in there, and you need to rebase against current code.
As covered in SubmittingPatches you should always CC maintainers on patches.
config SND_SOC_AD73311 tristate
Random whitespace change, should be removed.
- Author: Vladimir Barinov, vbarinov@embeddedalley.com
Jiri Prchal, <jiri.prchal@aksignal.cz
If you're going to do this you probably want a > in there.
{ struct snd_soc_codec *codec = codec_dai->codec; struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
- u8 data;
- /* set external clock on GPIO2 or BCLK */
- data = snd_soc_read(codec, AIC3X_CLKGEN_CTRL_REG);
- data &= 0x0f;
- data |= ((clk_id << PLLCLK_IN_SHIFT) | (clk_id << CLKDIV_IN_SHIFT));
- snd_soc_write(codec, AIC3X_CLKGEN_CTRL_REG, data);
This looks like an unrelated change which is specific to your board. You should add an interface for configuring this functionality .
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
dev_err(codec->dev, "failed to set cache I/O: %d\n", ret);
Why are you decapitalising th estart of the sentance here?
+static struct spi_driver aic3x_spi_driver = {
- .driver = {
.name = "tlv320aic3x-codec",
.owner = THIS_MODULE,
Remove the -codec from the driver name.
+/* special functions for codecs with 7 bit register address and LSB read/write (like TLV320AIC3X) */ +static unsigned int snd_soc_7_8_read(struct snd_soc_codec *codec,
unsigned int reg)
+{
- int ret;
- unsigned int val;
This won't apply against the current kernel and should be a separate patch, it's a generic thing rather than part of the CODEC driver.
![](https://secure.gravatar.com/avatar/0e61e149296fd6c9784a02e5dd12bcf2.jpg?s=120&d=mm&r=g)
Dne 2.4.2011 10:26, Mark Brown napsal(a):
On Thu, Mar 24, 2011 at 11:20:45AM +0100, Prchal Ji?? wrote:
Hi, this patch ads SPI communication for codecs TLV320AIC3X and clock input on GPIO2 or BCLK. Tested on TLV320AIC3106 and AT91SAM9260. TODO: Set the model in SPI probe the right way. I don't know how.
Register two SPI drivers with different names.
???
This codec communicates on SPI in 1st byte: 7 MSB is register address, 1 LSB is read/write, 2nd byte data. For this reason there is new functions in soc-cache.c snd_soc_7_8_*.
This looks mostly good but there's some cleanups needed, mostly from extra stuff which snuck in there, and you need to rebase against current code.
What cleanup? I copy functions snd_soc_8_8_* and made change to 7_8.
As covered in SubmittingPatches you should always CC maintainers on patches.
Who is maintainer? I didn't find anyone, so I CC to author.
config SND_SOC_AD73311 tristate
Random whitespace change, should be removed.
Yes.
- Author: Vladimir Barinov, vbarinov@embeddedalley.com
Jiri Prchal, <jiri.prchal@aksignal.cz
If you're going to do this you probably want a > in there.
OK
{ struct snd_soc_codec *codec = codec_dai->codec; struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
- u8 data;
- /* set external clock on GPIO2 or BCLK */
- data = snd_soc_read(codec, AIC3X_CLKGEN_CTRL_REG);
- data &= 0x0f;
- data |= ((clk_id << PLLCLK_IN_SHIFT) | (clk_id << CLKDIV_IN_SHIFT));
- snd_soc_write(codec, AIC3X_CLKGEN_CTRL_REG, data);
This looks like an unrelated change which is specific to your board. You should add an interface for configuring this functionality .
No, it's for all, who uses other clock source. Interface is standard function: /* Set the codec system clock for DAC and ADC */ ret = snd_soc_dai_set_sysclk(codec_dai, CLKIN_BCLK, cdu_audio[i].codecclk, SND_SOC_CLOCK_IN);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
dev_err(codec->dev, "failed to set cache I/O: %d\n", ret);
Why are you decapitalising th estart of the sentance here?
Corrected.
+static struct spi_driver aic3x_spi_driver = {
- .driver = {
.name = "tlv320aic3x-codec",
.owner = THIS_MODULE,
Remove the -codec from the driver name.
Why? In I2C part it must be there, so should it be same?
+/* special functions for codecs with 7 bit register address and LSB read/write (like TLV320AIC3X) */ +static unsigned int snd_soc_7_8_read(struct snd_soc_codec *codec,
unsigned int reg)
+{
- int ret;
- unsigned int val;
This won't apply against the current kernel and should be a separate patch, it's a generic thing rather than part of the CODEC driver.
I split it to another PATCH.
-- To unsubscribe from this list: send the line "unsubscribe alsa-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/Kconfig linux-2.6.38-patch/sound/soc/codecs/Kconfig --- linux-2.6.38-vanilla/sound/soc/codecs/Kconfig 2011-03-15 02:20:32.000000000 +0100 +++ linux-2.6.38-patch/sound/soc/codecs/Kconfig 2011-04-04 08:30:12.115356779 +0200 @@ -37,7 +37,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TLV320AIC23 if I2C select SND_SOC_TLV320AIC26 if SPI_MASTER - select SND_SOC_TLV320AIC3X if I2C + select SND_SOC_TLV320AIC3X if SND_SOC_I2C_AND_SPI select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.c linux-2.6.38-patch/sound/soc/codecs/tlv320aic3x.c --- linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.c 2011-03-15 02:20:32.000000000 +0100 +++ linux-2.6.38-patch/sound/soc/codecs/tlv320aic3x.c 2011-04-04 08:31:33.521844547 +0200 @@ -2,7 +2,9 @@ * ALSA SoC TLV320AIC3X codec driver * * Author: Vladimir Barinov, vbarinov@embeddedalley.com + * Jiri Prchal, jiri.prchal@aksignal.cz * Copyright: (C) 2007 MontaVista Software, Inc., source@mvista.com + * (C) 2011 AK signal Brno * * Based on sound/soc/codecs/wm8753.c by Liam Girdwood * @@ -42,6 +44,7 @@ #include <linux/regulator/consumer.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/spi/spi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -864,9 +867,15 @@ static int aic3x_hw_params(struct snd_pc snd_soc_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE); }
- /* Route Left DAC to left channel input and - * right DAC to right channel input */ - data = (LDAC2LCH | RDAC2RCH); + /* If is stereo: Route Left DAC to left channel input and + * right DAC to right channel input + * else mono: route left input to both DAC + */ + if (params_channels(params) == 2) + data = (LDAC2LCH | RDAC2RCH); + else + data = (LDAC2LCH | RDAC2LCH); + data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000; if (params_rate(params) >= 64000) data |= DUAL_RATE_MODE; @@ -984,6 +993,13 @@ static int aic3x_set_dai_sysclk(struct s { struct snd_soc_codec *codec = codec_dai->codec; struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); + u8 data; + + /* set external clock on GPIO2 or BCLK */ + data = snd_soc_read(codec, AIC3X_CLKGEN_CTRL_REG); + data &= 0x0f; + data |= ((clk_id << PLLCLK_IN_SHIFT) | (clk_id << CLKDIV_IN_SHIFT)); + snd_soc_write(codec, AIC3X_CLKGEN_CTRL_REG, data);
aic3x->sysclk = freq; return 0; @@ -1371,7 +1387,10 @@ static int aic3x_probe(struct snd_soc_co aic3x->codec = codec; codec->dapm.idle_bias_off = 1;
- ret = snd_soc_codec_set_cache_io(codec, 8, 8, aic3x->control_type); + if (aic3x->control_type == SND_SOC_I2C) + ret = snd_soc_codec_set_cache_io(codec, 8, 8, aic3x->control_type); + else + ret = snd_soc_codec_set_cache_io(codec, 7, 8, aic3x->control_type); if (ret != 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; @@ -1472,6 +1491,54 @@ static struct snd_soc_codec_driver soc_c .resume = aic3x_resume, };
+#if defined(CONFIG_SPI_MASTER) +static int aic3x_spi_probe(struct spi_device *spi) +{ + struct aic3x_pdata *pdata = spi->dev.platform_data; + struct aic3x_priv *aic3x; + int ret; + + aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL); + if (aic3x == NULL) { + dev_err(&spi->dev, "failed to create private data\n"); + return -ENOMEM; + } + + aic3x->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, aic3x); + + if (pdata) { + aic3x->gpio_reset = pdata->gpio_reset; + aic3x->setup = pdata->setup; + } else { + aic3x->gpio_reset = -1; + } + + aic3x->model = AIC3X_MODEL_3X; + + ret = snd_soc_register_codec(&spi->dev, &soc_codec_dev_aic3x, &aic3x_dai, 1); + if (ret < 0) + kfree(aic3x); + return ret; +} + +static int __devexit aic3x_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver aic3x_spi_driver = { + .driver = { + .name = "tlv320aic3x-codec", + .owner = THIS_MODULE, + }, + .probe = aic3x_spi_probe, + .remove = __devexit_p(aic3x_spi_remove), +}; +#endif /* CONFIG_SPI_MASTER */ + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * AIC3X 2 wire address can be up to 4 devices with device addresses @@ -1557,6 +1624,13 @@ static int __init aic3x_modinit(void) ret); } #endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&aic3x_spi_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register AIC3X SPI driver: %d\n", + ret); + } +#endif return ret; } module_init(aic3x_modinit); @@ -1566,6 +1640,9 @@ static void __exit aic3x_exit(void) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&aic3x_i2c_driver); #endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&aic3x_spi_driver); +#endif } module_exit(aic3x_exit);
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.h linux-2.6.38-patch/sound/soc/codecs/tlv320aic3x.h --- linux-2.6.38-vanilla/sound/soc/codecs/tlv320aic3x.h 2011-03-15 02:20:32.000000000 +0100 +++ linux-2.6.38-patch/sound/soc/codecs/tlv320aic3x.h 2011-03-25 12:15:06.620049184 +0100 @@ -163,6 +163,10 @@ #define DUAL_RATE_MODE ((1 << 5) | (1 << 6)) #define LDAC2LCH (0x1 << 3) #define RDAC2RCH (0x1 << 1) +#define LDAC2RCH (0x2 << 3) +#define RDAC2LCH (0x2 << 1) +#define LDAC2MONOMIX (0x3 << 3) +#define RDAC2MONOMIX (0x3 << 1)
/* PLL registers bitfields */ #define PLLP_SHIFT 0 @@ -178,6 +182,13 @@ #define PLL_CLKIN_SHIFT 4 #define MCLK_SOURCE 0x0 #define PLL_CLKDIV_SHIFT 0 +#define PLLCLK_IN_SHIFT 4 +#define CLKDIV_IN_SHIFT 6 +/* clock in source */ +#define CLKIN_MCLK 0 +#define CLKIN_GPIO2 1 +#define CLKIN_BCLK 2 +
/* Software reset register bits */ #define SOFT_RESET 0x80
![](https://secure.gravatar.com/avatar/d28dfe03ea754ea1153719f4ced12649.jpg?s=120&d=mm&r=g)
On Mon, Apr 04, 2011 at 09:49:49AM +0200, Prchal Jiří wrote:
Dne 2.4.2011 10:26, Mark Brown napsal(a):
TODO: Set the model in SPI probe the right way. I don't know how.
Register two SPI drivers with different names.
???
Register a SPI driver per model.
This looks mostly good but there's some cleanups needed, mostly from extra stuff which snuck in there, and you need to rebase against current code.
What cleanup? I copy functions snd_soc_8_8_* and made change to 7_8.
The comments I've made in the rest of the review such as removing random whitespace updates.
As covered in SubmittingPatches you should always CC maintainers on patches.
Who is maintainer? I didn't find anyone, so I CC to author.
Myself and Liam Girdwood. At the most basic level the people you'd expect to apply the patch.
- /* set external clock on GPIO2 or BCLK */
- data = snd_soc_read(codec, AIC3X_CLKGEN_CTRL_REG);
- data &= 0x0f;
- data |= ((clk_id << PLLCLK_IN_SHIFT) | (clk_id << CLKDIV_IN_SHIFT));
- snd_soc_write(codec, AIC3X_CLKGEN_CTRL_REG, data);
This looks like an unrelated change which is specific to your board. You should add an interface for configuring this functionality .
No, it's for all, who uses other clock source. Interface is standard function: /* Set the codec system clock for DAC and ADC */ ret = snd_soc_dai_set_sysclk(codec_dai, CLKIN_BCLK, cdu_audio[i].codecclk, SND_SOC_CLOCK_IN);
In that case you should submit a separate patch adding this functionality, taking care to ensure that you don't break existing users.
+static struct spi_driver aic3x_spi_driver = {
- .driver = {
.name = "tlv320aic3x-codec",
.owner = THIS_MODULE,
Remove the -codec from the driver name.
Why? In I2C part it must be there, so should it be same?
No, it should be removed from the I2C driver too.
![](https://secure.gravatar.com/avatar/0e61e149296fd6c9784a02e5dd12bcf2.jpg?s=120&d=mm&r=g)
Hi, this is separated generic part of previous patch. It contains read and write functions for codecs which communicate via SPI with 7bit register address, 1 LSB is read/write and 2nd byte data.
Dne 2.4.2011 10:26, Mark Brown napsal(a):
+/* special functions for codecs with 7 bit register address and LSB read/write (like TLV320AIC3X) */ +static unsigned int snd_soc_7_8_read(struct snd_soc_codec *codec,
unsigned int reg)
+{
- int ret;
- unsigned int val;
This won't apply against the current kernel and should be a separate patch, it's a generic thing rather than part of the CODEC driver. -- To unsubscribe from this list: send the line "unsubscribe alsa-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/soc-cache.c linux-2.6.38-patch/sound/soc/soc-cache.c --- linux-2.6.38-vanilla/sound/soc/soc-cache.c 2011-03-15 02:20:32.000000000 +0100 +++ linux-2.6.38-patch/sound/soc/soc-cache.c 2011-03-24 09:23:00.984373772 +0100 @@ -99,6 +99,58 @@ static int snd_soc_4_12_spi_write(void * #define snd_soc_4_12_spi_write NULL #endif
+/* special functions for codecs with 7 bit register address and LSB read/write (like TLV320AIC3X) */ +static unsigned int snd_soc_7_8_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + int ret; + unsigned int val; + + if (reg >= codec->driver->reg_cache_size || + snd_soc_codec_volatile_register(codec, reg)) { + if (codec->cache_only) + return -1; + + BUG_ON(!codec->hw_read); + return codec->hw_read(codec, ((reg << 1) | 1)); + } + + ret = snd_soc_cache_read(codec, reg, &val); + if (ret < 0) + return -1; + return val; +} + +static int snd_soc_7_8_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + int ret; + + data[0] = (reg << 1); + data[1] = value; + + if (!snd_soc_codec_volatile_register(codec, reg) && + reg < codec->driver->reg_cache_size) { + ret = snd_soc_cache_write(codec, reg, value); + if (ret < 0) + return -1; + } + + if (codec->cache_only) { + codec->cache_sync = 1; + return 0; + } + + ret = codec->hw_write(codec->control_data, data, 2); + if (ret == 2) + return 0; + if (ret < 0) + return ret; + else + return -EIO; +} + static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec, unsigned int reg) { @@ -661,6 +713,11 @@ static struct { .spi_write = snd_soc_4_12_spi_write, }, { + .addr_bits = 7, .data_bits = 8, + .write = snd_soc_7_8_write, .read = snd_soc_7_8_read, + .spi_write = snd_soc_8_8_spi_write, + }, + { .addr_bits = 7, .data_bits = 9, .write = snd_soc_7_9_write, .read = snd_soc_7_9_read, .spi_write = snd_soc_7_9_spi_write,
![](https://secure.gravatar.com/avatar/d28dfe03ea754ea1153719f4ced12649.jpg?s=120&d=mm&r=g)
On Mon, Apr 04, 2011 at 10:01:54AM +0200, Prchal Jiří wrote:
Hi, this is separated generic part of previous patch. It contains read and write functions for codecs which communicate via SPI with 7bit register address, 1 LSB is read/write and 2nd byte data.
Please folow the patch submission processs in SubmittingPatches, especially with regard to the formatting of the mail containing the patch.
Also note that as I previously said:
This won't apply against the current kernel and should be a separate
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/soc-cache.c linux-2.6.38-patch/sound/soc/soc-cache.c --- linux-2.6.38-vanilla/sound/soc/soc-cache.c 2011-03-15 02:20:32.000000000 +0100 +++ linux-2.6.38-patch/sound/soc/soc-cache.c 2011-03-24 09:23:00.984373772 +0100
There have been some substantial updates to this code in current kernels.
participants (2)
-
Mark Brown
-
Prchal Jiří