[alsa-devel] [PATCH v2 2/2] mfd: arizona: Update DT binding to support INn_MODE init_data
This patch update DT binding to support INn_MODE init_data. Each input signal path can be configurated either as a Analogue or Digital using the INn_MODE registers.
Signed-off-by: Inha Song ideal.song@samsung.com --- Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 5c7e723..b8c131e 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -42,6 +42,14 @@ Optional properties: the chip default will be used. If present exactly five values must be specified.
+ - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signal. Each input signal path can be configurated either as a + Analogue or Digital using the INn_MODE registers. If absent, INn_MODE + registers set to 0 by default. If present, values must be specified less + than or equal to the number of input singal. If values less than the + number of input signal, elements that has not been specifed are set to 0 + by default. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
On Wed, Aug 13, 2014 at 08:54:56PM +0900, Inha Song wrote:
This patch update DT binding to support INn_MODE init_data. Each input signal path can be configurated either as a Analogue or Digital using the INn_MODE registers.
Signed-off-by: Inha Song ideal.song@samsung.com
Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 5c7e723..b8c131e 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -42,6 +42,14 @@ Optional properties: the chip default will be used. If present exactly five values must be specified.
- wlf,inmode : A list of INn_MODE register values, where n is the number
- of input signal. Each input signal path can be configurated either as a
- Analogue or Digital using the INn_MODE registers. If absent, INn_MODE
- registers set to 0 by default. If present, values must be specified less
- than or equal to the number of input singal. If values less than the
Typo here should be "input signals".
- number of input signal, elements that has not been specifed are set to 0
- by default.
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
-- 2.0.0.390.gcb682f8
Thanks, Charles
Hi, Charles. Thanks for your review.
On Wed, 13 Aug 2014 13:18:14 +0100 Charles Keepax ckeepax@opensource.wolfsonmicro.com wrote:
On Wed, Aug 13, 2014 at 08:54:56PM +0900, Inha Song wrote:
This patch update DT binding to support INn_MODE init_data. Each input signal path can be configurated either as a Analogue or Digital using the INn_MODE registers.
Signed-off-by: Inha Song ideal.song@samsung.com
Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 5c7e723..b8c131e 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -42,6 +42,14 @@ Optional properties: the chip default will be used. If present exactly five values must be specified.
- wlf,inmode : A list of INn_MODE register values, where n is the number
- of input signal. Each input signal path can be configurated either as a
- Analogue or Digital using the INn_MODE registers. If absent, INn_MODE
- registers set to 0 by default. If present, values must be specified less
- than or equal to the number of input singal. If values less than the
Typo here should be "input signals".
Oops, Thanks! I will fix this.
Best regards, Inha Song.
- number of input signal, elements that has not been specifed are set to 0
- by default.
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
-- 2.0.0.390.gcb682f8
Thanks, Charles
participants (2)
-
Charles Keepax -
Inha Song