Hello,

here goes attempt #3 for the SH7760 ASoC patch. Changes v2 -> v3 - added a generic demo board for AC97

Changes v1 -> v2 - incorporate Paul Mundt's suggestions - work around an oops when aplay is used in mmap mode ('aplay -M') by changing the allocation type to SNDRV_DMA_TYPE_CONTINUOUS

As soon as I get Linux working on the EDOSK7780 board, I'll complete SH7780 support as well.

Thanks, Manuel Lauss

---

ALSA ASoC support for SH7760 - SH7760 DMA engine (dmabrg) - AC97 driver for HAC unit(s) found on SH7760/SH7780 - I2S driver for SSI unit(s) found on SH7760/SH7780 - generic SH7760-AC97 "demoboard"

sound/soc/Kconfig | 1 + sound/soc/Makefile | 3 +- sound/soc/sh/Kconfig | 39 +++++ sound/soc/sh/Makefile | 14 ++ sound/soc/sh/dma-sh7760.c | 354 +++++++++++++++++++++++++++++++++++++++ sound/soc/sh/hac.c | 322 +++++++++++++++++++++++++++++++++++ sound/soc/sh/sh7760-ac97.c | 92 ++++++++++ sound/soc/sh/ssi.c | 400 ++++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 1224 insertions(+), 1 deletions(-)

Signed-off-by: Manuel Lauss mano@roarinelk.homelinux.net

diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index dccaa4b..3e3df26 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -26,6 +26,7 @@ menu "SoC Platforms" depends on SND_SOC source "sound/soc/at91/Kconfig" source "sound/soc/pxa/Kconfig" +source "sound/soc/sh/Kconfig" endmenu

# Supported codecs diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 98e6f49..e1c9a70 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,4 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o

obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ +obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ sh/ + diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig new file mode 100644 index 0000000..a332e51 --- /dev/null +++ b/sound/soc/sh/Kconfig @@ -0,0 +1,39 @@ +menu "SoC Audio support for SuperH" + +config SND_SOC_PCM_SH7760 + tristate "SoC Audio support for Renesas SH7760" + depends on CPU_SUBTYPE_SH7760 && SND_SOC + select SH_DMABRG + help + Enable this option for SH7760 AC97/I2S audio support. + + +## +## Audio unit modules +## + +config SND_SOC_SH4_HAC + select AC97_BUS + select SND_SOC_AC97_BUS + select SND_AC97_CODEC + tristate + +config SND_SOC_SH4_SSI + tristate + + + +## +## Boards +## + +config SND_SH7760_AC97 + tristate "SH7760 AC97 sound support" + depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760 + select SND_SOC_SH4_HAC + select SND_SOC_AC97_CODEC + help + This option enables generic sound support for the first + AC97 unit of the SH7760. + +endmenu diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile new file mode 100644 index 0000000..a8e8ab8 --- /dev/null +++ b/sound/soc/sh/Makefile @@ -0,0 +1,14 @@ +## DMA engines +snd-soc-dma-sh7760-objs := dma-sh7760.o +obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o + +## audio units found on some SH-4 +snd-soc-hac-objs := hac.o +snd-soc-ssi-objs := ssi.o +obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o +obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o + +## boards +snd-soc-sh7760-ac97-objs := sh7760-ac97.o + +obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c new file mode 100644 index 0000000..cdee374 --- /dev/null +++ b/sound/soc/sh/dma-sh7760.c @@ -0,0 +1,354 @@ +/* + * SH7760 ("camelot") DMABRG audio DMA unit support + * + * Copyright (C) 2007 Manuel Lauss mano@roarinelk.homelinux.net + * licensed under the terms outlined in the file COPYING at the root + * of the linux kernel sources. + * + * The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which + * trigger an interrupt when one half of the programmed transfer size + * has been xmitted. + * + * FIXME: little-endian only for now + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <asm/dmabrg.h> + + +/* registers and bits */ +#define BRGATXSAR 0x00 +#define BRGARXDAR 0x04 +#define BRGATXTCR 0x08 +#define BRGARXTCR 0x0C +#define BRGACR 0x10 +#define BRGATXTCNT 0x14 +#define BRGARXTCNT 0x18 + +#define ACR_RAR (1 << 18) +#define ACR_RDS (1 << 17) +#define ACR_RDE (1 << 16) +#define ACR_TAR (1 << 2) +#define ACR_TDS (1 << 1) +#define ACR_TDE (1 << 0) + +/* receiver/transmitter data alignment */ +#define ACR_RAM_NONE (0 << 24) +#define ACR_RAM_4BYTE (1 << 24) +#define ACR_RAM_2WORD (2 << 24) +#define ACR_TAM_NONE (0 << 8) +#define ACR_TAM_4BYTE (1 << 8) +#define ACR_TAM_2WORD (2 << 8) + + +struct camelot_pcm { + unsigned long mmio; /* DMABRG audio channel control reg MMIO */ + unsigned int txid; /* ID of first DMABRG IRQ for this unit */ + + struct snd_pcm_substream *tx_ss; + unsigned long tx_period_size; + unsigned int tx_period; + + struct snd_pcm_substream *rx_ss; + unsigned long rx_period_size; + unsigned int rx_period; + +} cam_pcm_data[2] = { + { + .mmio = 0xFE3C0040, + .txid = DMABRGIRQ_A0TXF, + }, + { + .mmio = 0xFE3C0060, + .txid = DMABRGIRQ_A1TXF, + }, +}; + +#define BRGREG(x) (*(unsigned long *)(cam->mmio + (x))) + +/* + * set a minimum of 16kb per period, to avoid interrupt-"storm" and + * resulting skipping. In general, the bigger the minimum size, the + * better for overall system performance. (The SH7760 is a puny CPU + * with a slow SDRAM interface and poor internal bus bandwidth, + * *especially* when the LCDC is active). The minimum for the DMAC + * is 8 bytes; 16kbytes are enough to get skip-free playback of a + * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain + * reasonable responsiveness in MPlayer. + */ +#define DMABRG_PERIOD_MIN 16 * 1024 +#define DMABRG_PERIOD_MAX 0x03fffffc +#define DMABRG_PREALLOC_BUFFER 32 * 1024 +#define DMABRG_PREALLOC_BUFFER_MAX 32 * 1024 + +/* support everything the SSI supports */ +#define DMABRG_RATES \ + SNDRV_PCM_RATE_8000_192000 + +#define DMABRG_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) + +static struct snd_pcm_hardware camelot_pcm_hardware = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = DMABRG_FMTS, + .rates = DMABRG_RATES, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 2, + .channels_max = 8, /* max of the SSI */ + .buffer_bytes_max = DMABRG_PERIOD_MAX, + .period_bytes_min = DMABRG_PERIOD_MIN, + .period_bytes_max = DMABRG_PERIOD_MAX / 2, + .periods_min = 2, + .periods_max = 2, + .fifo_size = 128, +}; + +static void camelot_txdma(void *data) +{ + struct camelot_pcm *cam = data; + cam->tx_period ^= 1; + snd_pcm_period_elapsed(cam->tx_ss); +} + +static void camelot_rxdma(void *data) +{ + struct camelot_pcm *cam = data; + cam->rx_period ^= 1; + snd_pcm_period_elapsed(cam->rx_ss); +} + +static int camelot_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1; + int ret, dmairq; + + snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware); + + /* DMABRG buffer half/full events */ + dmairq = (recv) ? cam->txid + 2 : cam->txid; + if (recv) { + cam->rx_ss = substream; + ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam); + if (unlikely(ret)) { + pr_debug("audio unit %d irqs already taken!\n", + rtd->dai->cpu_dai->id); + return -EBUSY; + } + (void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam); + } else { + cam->tx_ss = substream; + ret = dmabrg_request_irq(dmairq, camelot_txdma, cam); + if (unlikely(ret)) { + pr_debug("audio unit %d irqs already taken!\n", + rtd->dai->cpu_dai->id); + return -EBUSY; + } + (void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam); + } + return 0; +} + +static int camelot_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1; + int dmairq; + + dmairq = (recv) ? cam->txid + 2 : cam->txid; + + if (recv) + cam->rx_ss = NULL; + else + cam->tx_ss = NULL; + + dmabrg_free_irq(dmairq + 1); + dmabrg_free_irq(dmairq); + + return 0; +} + +static int camelot_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1; + int ret; + + ret = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (ret < 0) + return ret; + + if (recv) { + cam->rx_period_size = params_period_bytes(hw_params); + cam->rx_period = 0; + } else { + cam->tx_period_size = params_period_bytes(hw_params); + cam->tx_period = 0; + } + return 0; +} + +static int camelot_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int camelot_prepare(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + + pr_debug("PCM data: addr 0x%08ulx len %d\n", + (u32)runtime->dma_addr, runtime->dma_bytes); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area; + BRGREG(BRGATXTCR) = runtime->dma_bytes; + } else { + BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area; + BRGREG(BRGARXTCR) = runtime->dma_bytes; + } + + return 0; +} + +static inline void dmabrg_play_dma_start(struct camelot_pcm *cam) +{ + unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS); + /* start DMABRG engine: XFER start, auto-addr-reload */ + BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD; +} + +static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam) +{ + unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS); + /* forcibly terminate data transmission */ + BRGREG(BRGACR) = acr | ACR_TDS; +} + +static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam) +{ + unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS); + /* start DMABRG engine: recv start, auto-reload */ + BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD; +} + +static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam) +{ + unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS); + /* forcibly terminate data receiver */ + BRGREG(BRGACR) = acr | ACR_RDS; +} + +static int camelot_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + if (recv) + dmabrg_rec_dma_start(cam); + else + dmabrg_play_dma_start(cam); + break; + case SNDRV_PCM_TRIGGER_STOP: + if (recv) + dmabrg_rec_dma_stop(cam); + else + dmabrg_play_dma_stop(cam); + break; + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_uframes_t camelot_pos(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct camelot_pcm *cam = &cam_pcm_data[rtd->dai->cpu_dai->id]; + int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1; + unsigned long pos; + + /* cannot use the DMABRG pointer register: under load, by the + * time ALSA comes around to read the register, it is already + * far ahead (or worse, already done with the fragment) of the + * position at the time the IRQ was triggered, which results in + * fast-playback sound in my test application (ScummVM) + */ + if (recv) + pos = cam->rx_period ? cam->rx_period_size : 0; + else + pos = cam->tx_period ? cam->tx_period_size : 0; + + return bytes_to_frames(runtime, pos); +} + +static struct snd_pcm_ops camelot_pcm_ops = { + .open = camelot_pcm_open, + .close = camelot_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = camelot_hw_params, + .hw_free = camelot_hw_free, + .prepare = camelot_prepare, + .trigger = camelot_trigger, + .pointer = camelot_pos, +}; + +static void camelot_pcm_free(struct snd_pcm *pcm) +{ + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static int camelot_pcm_new(struct snd_card *card, + struct snd_soc_codec_dai *dai, + struct snd_pcm *pcm) +{ + /* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel + * in MMAP mode (i.e. aplay -M) + */ + snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + DMABRG_PREALLOC_BUFFER, DMABRG_PREALLOC_BUFFER_MAX); + + return 0; +} + +struct snd_soc_platform sh7760_soc_platform = { + .name = "sh7760-pcm", + .pcm_ops = &camelot_pcm_ops, + .pcm_new = camelot_pcm_new, + .pcm_free = camelot_pcm_free, +}; +EXPORT_SYMBOL_GPL(sh7760_soc_platform); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver"); +MODULE_AUTHOR("Manuel Lauss mano@roarinelk.homelinux.net"); diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c new file mode 100644 index 0000000..8e3f039 --- /dev/null +++ b/sound/soc/sh/hac.c @@ -0,0 +1,322 @@ +/* + * Hitachi Audio Controller (AC97) support for SH7760/SH7780 + * + * Copyright (c) 2007 Manuel Lauss mano@roarinelk.homelinux.net + * licensed under the terms outlined in the file COPYING at the root + * of the linux kernel sources. + * + * dont forget to set IPSEL/OMSEL register bits (in your board code) to + * enable HAC output pins! + */ + +/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only + * the FIRST can be used since ASoC does not pass any information to the + * ac97_read/write() functions regarding WHICH unit to use. You'll have + * to edit the code a bit to use the other AC97 unit. --mlau + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/ac97_codec.h> +#include <sound/initval.h> +#include <sound/soc.h> + +/* regs and bits */ +#define HACCR 0x08 +#define HACCSAR 0x20 +#define HACCSDR 0x24 +#define HACPCML 0x28 +#define HACPCMR 0x2C +#define HACTIER 0x50 +#define HACTSR 0x54 +#define HACRIER 0x58 +#define HACRSR 0x5C +#define HACACR 0x60 + +#define CR_CR (1 << 15) /* "codec-ready" indicator */ +#define CR_CDRT (1 << 11) /* cold reset */ +#define CR_WMRT (1 << 10) /* warm reset */ +#define CR_B9 (1 << 9) /* the mysterious "bit 9" */ +#define CR_ST (1 << 5) /* AC97 link start bit */ + +#define CSAR_RD (1 << 19) /* AC97 data read bit */ +#define CSAR_WR (0) + +#define TSR_CMDAMT (1 << 31) +#define TSR_CMDDMT (1 << 30) + +#define RSR_STARY (1 << 22) +#define RSR_STDRY (1 << 21) + +#define ACR_DMARX16 (1 << 30) +#define ACR_DMATX16 (1 << 29) +#define ACR_TX12ATOM (1 << 26) +#define ACR_DMARX20 ((1 << 24) | (1 << 22)) +#define ACR_DMATX20 ((1 << 23) | (1 << 21)) + +#define CSDR_SHIFT 4 +#define CSDR_MASK (0xffff << CSDR_SHIFT) +#define CSAR_SHIFT 12 +#define CSAR_MASK (0x7f << CSAR_SHIFT) + +#define AC97_WRITE_RETRY 1 +#define AC97_READ_RETRY 5 + +/* manual-suggested AC97 codec access timeouts (us) */ +#define TMO_E1 500 /* 21 < E1 < 1000 */ +#define TMO_E2 13 /* 13 < E2 */ +#define TMO_E3 21 /* 21 < E3 */ +#define TMO_E4 500 /* 21 < E4 < 1000 */ + +struct hac_priv { + unsigned long mmio; /* HAC base address */ +} hac_cpu_data[] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7760) + { + .mmio = 0xFE240000, + }, + { + .mmio = 0xFE250000, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) + { + .mmio = 0xFFE40000, + }, +#else +#error "Unsupported SuperH SoC" +#endif +}; + +#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg))) + +/* + * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906) + */ +static int hac_get_codec_data(struct hac_priv *hac, unsigned short r, + unsigned short *v) +{ + unsigned int to1, to2, i; + unsigned short adr; + + for (i = 0; i < AC97_READ_RETRY; ++i) { + *v = 0; + /* wait for HAC to receive something from the codec */ + for (to1 = TMO_E4; + to1 && !(HACREG(HACRSR) & RSR_STARY); + --to1) + udelay(1); + for (to2 = TMO_E4; + to2 && !(HACREG(HACRSR) & RSR_STDRY); + --to2) + udelay(1); + + if (!to1 && !to2) + return 0; /* codec comm is down */ + + adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT); + *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT); + + HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY); + + if (r == adr) + break; + + /* manual says: wait at least 21 usec before retrying */ + udelay(21); + } + HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY); + return (i < AC97_READ_RETRY); +} + +static unsigned short hac_read_codec_aux(struct hac_priv *hac, + unsigned short reg) +{ + unsigned short val; + unsigned int i, to; + + for (i = 0; i < AC97_READ_RETRY; i++) { + /* send_read_request */ + local_irq_disable(); + HACREG(HACTSR) &= ~(TSR_CMDAMT); + HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD; + local_irq_enable(); + + for (to = TMO_E3; + to && !(HACREG(HACTSR) & TSR_CMDAMT); + --to) + udelay(1); + + HACREG(HACTSR) &= ~TSR_CMDAMT; + val = 0; + if (hac_get_codec_data(hac, reg, &val) != 0) + break; + } + + if (i == AC97_READ_RETRY) + return ~0; + + return val; +} + +static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + int unit_id = 0 /* ac97->private_data */; + struct hac_priv *hac = &hac_cpu_data[unit_id]; + unsigned int i, to; + /* write_codec_aux */ + for (i = 0; i < AC97_WRITE_RETRY; i++) { + /* send_write_request */ + local_irq_disable(); + HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT); + HACREG(HACCSDR) = (val << CSDR_SHIFT); + HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD); + local_irq_enable(); + + /* poll-wait for CMDAMT and CMDDMT */ + for (to = TMO_E1; + to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT)); + --to) + udelay(1); + + HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT); + if (to) + break; + /* timeout, try again */ + } +} + +static unsigned short hac_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + int unit_id = 0 /* ac97->private_data */; + struct hac_priv *hac = &hac_cpu_data[unit_id]; + return hac_read_codec_aux(hac, reg); +} + +static void hac_ac97_warmrst(struct snd_ac97 *ac97) +{ + int unit_id = 0 /* ac97->private_data */; + struct hac_priv *hac = &hac_cpu_data[unit_id]; + unsigned int tmo; + + HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9; + msleep(10); + HACREG(HACCR) = CR_ST | CR_B9; + for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--) + udelay(1); + + if (!tmo) + printk(KERN_INFO "hac: reset: AC97 link down!\n"); + /* settings this bit lets us have a conversation with codec */ + HACREG(HACACR) |= ACR_TX12ATOM; +} + +static void hac_ac97_coldrst(struct snd_ac97 *ac97) +{ + int unit_id = 0 /* ac97->private_data */; + struct hac_priv *hac; + hac = &hac_cpu_data[unit_id]; + + HACREG(HACCR) = 0; + HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9; + msleep(10); + hac_ac97_warmrst(ac97); +} + +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = hac_ac97_read, + .write = hac_ac97_write, + .reset = hac_ac97_coldrst, + .warm_reset = hac_ac97_warmrst, +}; +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +static int hac_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct hac_priv *hac = &hac_cpu_data[rtd->dai->cpu_dai->id]; + int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; + + switch (params->msbits) { + case 16: + HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16; + HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20; + break; + case 20: + HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16; + HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20; + break; + default: + pr_debug("hac: invalid depth %d bit\n", params->msbits); + return -EINVAL; + break; + } + + return 0; +} + +#define AC97_RATES \ + SNDRV_PCM_RATE_8000_192000 + +#define AC97_FMTS \ + SNDRV_PCM_FMTBIT_S16_LE + +struct snd_soc_cpu_dai sh4_hac_dai[] = { +{ + .name = "HAC0", + .id = 0, + .type = SND_SOC_DAI_AC97, + .playback = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, + .capture = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, + .ops = { + .hw_params = hac_hw_params, + }, +}, +#ifdef CONFIG_CPU_SUBTYPE_SH7760 +{ + .name = "HAC1", + .id = 1, + .type = SND_SOC_DAI_AC97, + .playback = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, + .capture = { + .rates = AC97_RATES, + .formats = AC97_FMTS, + .channels_min = 2, + .channels_max = 2, + }, + .ops = { + .hw_params = hac_hw_params, + }, + +}, +#endif +}; +EXPORT_SYMBOL_GPL(sh4_hac_dai); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver"); +MODULE_AUTHOR("Manuel Lauss mano@roarinelk.homelinux.net"); diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c new file mode 100644 index 0000000..5563f14 --- /dev/null +++ b/sound/soc/sh/sh7760-ac97.c @@ -0,0 +1,92 @@ +/* + * Generic AC97 sound support for SH7760 + * + * (c) 2007 Manuel Lauss + * + * Licensed under the GPLv2. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <asm/io.h> + +#include "../codecs/ac97.h" + +#define IPSEL 0xFE400034 + +/* platform specific structs can be declared here */ +extern struct snd_soc_cpu_dai sh4_hac_dai[2]; +extern struct snd_soc_platform sh7760_soc_platform; + +static int machine_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_sync_endpoints(codec); + return 0; +} + +static struct snd_soc_dai_link sh7760_ac97_dai = { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &sh4_hac_dai[0], /* HAC0 */ + .codec_dai = &ac97_dai, + .init = machine_init, + .ops = NULL, +}; + +static struct snd_soc_machine sh7760_ac97_soc_machine = { + .name = "SH7760 AC97", + .dai_link = &sh7760_ac97_dai, + .num_links = 1, +}; + +static struct snd_soc_device sh7760_ac97_snd_devdata = { + .machine = &sh7760_ac97_soc_machine, + .platform = &sh7760_soc_platform, + .codec_dev = &soc_codec_dev_ac97, +}; + +static struct platform_device *sh7760_ac97_snd_device; + +static int __init sh7760_ac97_init(void) +{ + int ret; + unsigned short ipsel; + + /* enable both AC97 controllers in pinmux reg */ + ipsel = ctrl_inw(IPSEL); + ctrl_outw(ipsel | (3 << 10), IPSEL); + + ret = -ENOMEM; + sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1); + if (!sh7760_ac97_snd_device) + goto out; + + platform_set_drvdata(sh7760_ac97_snd_device, + &sh7760_ac97_snd_devdata); + sh7760_ac97_snd_devdata.dev = &sh7760_ac97_snd_device->dev; + ret = platform_device_add(sh7760_ac97_snd_device); + + if (ret) + platform_device_put(sh7760_ac97_snd_device); + +out: + return ret; +} + +static void __exit sh7760_ac97_exit(void) +{ + platform_device_unregister(sh7760_ac97_snd_device); +} + +module_init(sh7760_ac97_init); +module_exit(sh7760_ac97_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine"); +MODULE_AUTHOR("Manuel Lauss mano@roarinelk.homelinux.net"); diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c new file mode 100644 index 0000000..b72bc31 --- /dev/null +++ b/sound/soc/sh/ssi.c @@ -0,0 +1,400 @@ +/* + * Serial Sound Interface (I2S) support for SH7760/SH7780 + * + * Copyright (c) 2007 Manuel Lauss mano@roarinelk.homelinux.net + * + * licensed under the terms outlined in the file COPYING at the root + * of the linux kernel sources. + * + * dont forget to set IPSEL/OMSEL register bits (in your board code) to + * enable SSI output pins! + */ + +/* + * LIMITATIONS: + * The SSI unit has only one physical data line, so full duplex is + * impossible. This can be remedied on the SH7760 by using the + * other SSI unit for recording; however the SH7780 has only 1 SSI + * unit, and its pins are shared with the AC97 unit, among others. + * + * FEATURES: + * The SSI features "compressed mode": in this mode it continuously + * streams PCM data over the I2S lines and uses LRCK as a handshake + * signal. Can be used to send compressed data (AC3/DTS) to a DSP. + * The number of bits sent over the wire in a frame can be adjusted + * and can be independent from the actual sample bit depth. This is + * useful to support TDM mode codecs like the AD1939 which have a + * fixed TDM slot size, regardless of sample resolution. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/soc.h> +#include <asm/io.h> + +#define SSICR 0x00 +#define SSISR 0x04 + +#define CR_DMAEN (1 << 28) +#define CR_CHNL_SHIFT 22 +#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT) +#define CR_DWL_SHIFT 19 +#define CR_DWL_MASK (7 << CR_DWL_SHIFT) +#define CR_SWL_SHIFT 16 +#define CR_SWL_MASK (7 << CR_SWL_SHIFT) +#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */ +#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */ +#define CR_SCKP (1 << 13) /* I2Sclock polarity */ +#define CR_SWSP (1 << 12) /* LRCK polarity */ +#define CR_SPDP (1 << 11) +#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */ +#define CR_PDTA (1 << 9) /* fifo data alignment */ +#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */ +#define CR_BREN (1 << 7) /* clock gating in burst mode */ +#define CR_CKDIV_SHIFT 4 +#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */ +#define CR_MUTE (1 << 3) /* SSI mute */ +#define CR_CPEN (1 << 2) /* compressed mode */ +#define CR_TRMD (1 << 1) /* transmit/receive select */ +#define CR_EN (1 << 0) /* enable SSI */ + +#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg))) + +struct ssi_priv { + unsigned long mmio; + unsigned long sysclk; + int inuse; +} ssi_cpu_data[] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7760) + { + .mmio = 0xFE680000, + }, + { + .mmio = 0xFE690000, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) + { + .mmio = 0xFFE70000, + }, +#else +#error "Unsupported SuperH SoC" +#endif +}; + +/* + * track usage of the SSI; it is simplex-only so prevent attempts of + * concurrent playback + capture. FIXME: any locking required? + */ +static int ssi_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id]; + if (ssi->inuse) { + pr_debug("ssi: already in use!\n"); + return -EBUSY; + } else + ssi->inuse = 1; + return 0; +} + +static void ssi_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id]; + + ssi->inuse = 0; +} + +static int ssi_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + SSIREG(SSICR) |= CR_DMAEN | CR_EN; + break; + case SNDRV_PCM_TRIGGER_STOP: + SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ssi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id]; + unsigned long ssicr = SSIREG(SSICR); + unsigned int bits, channels, swl, recv, i; + + channels = params_channels(params); + bits = params->msbits; + recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1; + + pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr); + pr_debug("bits: %d channels: %d\n", bits, channels); + + ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA | + CR_SWL_MASK); + + /* direction (send/receive) */ + if (!recv) + ssicr |= CR_TRMD; /* transmit */ + + /* channels */ + if ((channels < 2) || (channels > 8) || (channels & 1)) { + pr_debug("ssi: invalid number of channels\n"); + return -EINVAL; + } + ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT; + + /* DATA WORD LENGTH (DWL): databits in audio sample */ + i = 0; + switch (bits) { + case 32: ++i; + case 24: ++i; + case 22: ++i; + case 20: ++i; + case 18: ++i; + case 16: ++i; + ssicr |= i << CR_DWL_SHIFT; + case 8: break; + default: + pr_debug("ssi: invalid sample width\n"); + return -EINVAL; + } + + /* + * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S + * wires. This is usually bits_per_sample x channels/2; i.e. in + * Stereo mode the SWL equals DWL. SWL can be bigger than the + * product of (channels_per_slot x samplebits), e.g. for codecs + * like the AD1939 which only accept 32bit wide TDM slots. For + * "standard" I2S operation we set SWL = chans / 2 * DWL here. + * Waiting for ASoC to get TDM support ;-) + */ + if ((bits > 16) && (bits <= 24)) { + bits = 24; /* these are padded by the SSI */ + /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */ + } + i = 0; + swl = (bits * channels) / 2; + switch (swl) { + case 256: ++i; + case 128: ++i; + case 64: ++i; + case 48: ++i; + case 32: ++i; + case 16: ++i; + ssicr |= i << CR_SWL_SHIFT; + case 8: break; + default: + pr_debug("ssi: invalid system word length computed\n"); + return -EINVAL; + } + + SSIREG(SSICR) = ssicr; + + pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr); + return 0; +} + +static int ssi_set_sysclk(struct snd_soc_cpu_dai *cpu_dai, int clk_id, + unsigned int freq, int dir) +{ + struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id]; + + ssi->sysclk = freq; + + return 0; +} + +/* + * This divider is used to generate the SSI_SCK (I2S bitclock) from the + * clock at the HAC_BIT_CLK ("oversampling clock") pin. + */ +static int ssi_set_clkdiv(struct snd_soc_cpu_dai *dai, int did, int div) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + unsigned long ssicr; + int i; + + i = 0; + ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK; + switch (div) { + case 16: ++i; + case 8: ++i; + case 4: ++i; + case 2: ++i; + SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT); + case 1: break; + default: + pr_debug("ssi: invalid sck divider %d\n", div); + return -EINVAL; + } + + return 0; +} + +static int ssi_set_fmt(struct snd_soc_cpu_dai *dai, unsigned int fmt) +{ + struct ssi_priv *ssi = &ssi_cpu_data[dai->id]; + unsigned long ssicr = SSIREG(SSICR); + + pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr); + + ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP | + CR_SWS_MASTER | CR_SCK_MASTER); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + case SND_SOC_DAIFMT_RIGHT_J: + ssicr |= CR_DEL | CR_PDTA; + break; + case SND_SOC_DAIFMT_LEFT_J: + ssicr |= CR_DEL; + break; + default: + pr_debug("ssi: unsupported format\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) { + case SND_SOC_DAIFMT_CONT: + break; + case SND_SOC_DAIFMT_GATED: + ssicr |= CR_BREN; + break; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + ssicr |= CR_SCKP; /* sample data at low clkedge */ + break; + case SND_SOC_DAIFMT_NB_IF: + ssicr |= CR_SCKP | CR_SWSP; + break; + case SND_SOC_DAIFMT_IB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + ssicr |= CR_SWSP; /* word select starts low */ + break; + default: + pr_debug("ssi: invalid inversion\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + break; + case SND_SOC_DAIFMT_CBS_CFM: + ssicr |= CR_SCK_MASTER; + break; + case SND_SOC_DAIFMT_CBM_CFS: + ssicr |= CR_SWS_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + ssicr |= CR_SWS_MASTER | CR_SCK_MASTER; + break; + default: + pr_debug("ssi: invalid master/slave configuration\n"); + return -EINVAL; + } + + SSIREG(SSICR) = ssicr; + pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr); + + return 0; +} + +/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in + * Master mode, so really this is board specific; the SSI can do any + * rate with the right bitclk and divider settings. + */ +#define SSI_RATES \ + SNDRV_PCM_RATE_8000_192000 + +/* the SSI can do 8-32 bit samples, with 8 possible channels */ +#define SSI_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) + +struct snd_soc_cpu_dai sh4_ssi_dai[] = { +{ + .name = "SSI0", + .id = 0, + .type = SND_SOC_DAI_I2S, + .playback = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .capture = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .ops = { + .startup = ssi_startup, + .shutdown = ssi_shutdown, + .trigger = ssi_trigger, + .hw_params = ssi_hw_params, + }, + .dai_ops = { + .set_sysclk = ssi_set_sysclk, + .set_clkdiv = ssi_set_clkdiv, + .set_fmt = ssi_set_fmt, + }, +}, +#ifdef CONFIG_CPU_SUBTYPE_SH7760 +{ + .name = "SSI1", + .id = 1, + .type = SND_SOC_DAI_I2S, + .playback = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .capture = { + .rates = SSI_RATES, + .formats = SSI_FMTS, + .channels_min = 2, + .channels_max = 8, + }, + .ops = { + .startup = ssi_startup, + .shutdown = ssi_shutdown, + .trigger = ssi_trigger, + .hw_params = ssi_hw_params, + }, + .dai_ops = { + .set_sysclk = ssi_set_sysclk, + .set_clkdiv = ssi_set_clkdiv, + .set_fmt = ssi_set_fmt, + }, +}, +#endif +}; +EXPORT_SYMBOL_GPL(sh4_ssi_dai); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver"); +MODULE_AUTHOR("Manuel Lauss mano@roarinelk.homelinux.net");