[alsa-devel] [PATCHv1 0/8] ALSA: Add SAI driver and enable SGT15000 codec.
This patch series is mostly Freescale's SAI SoC Digital Audio Interface driver implementation. And the implementation is only compatible with device tree definition. This patch series is based on linux-next and has been tested on Vybrid VF610 Tower board using device tree. Added in v1: - Add SAI SoC Digital Audio Interface driver. - Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610. - Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board. - Add device tree bindings for Freescale SAI. - Revise the bugs about the sgt15000 codec. - Add SGT15000 based audio machine driver. - Enable SGT15000 codec based audio driver node for VF610. - Add device tree bindings for Freescale VF610 sound.
This adds Freescale SAI ASoC Audio support. This implementation is only compatible with device tree definition. Features: o Supports playback/capture o Supports 16/20/24 bit PCM o Supports 8k - 96k sample rates o Supports slave mode only. Signed-off-by: Alison Wang <b18965@freescale.com Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/fsl/Kconfig | 19 ++ sound/soc/fsl/Makefile | 7 + sound/soc/fsl/fsl-pcm-dma.c | 51 +++++ sound/soc/fsl/fsl-sai.c | 515 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/fsl/fsl-sai.h | 127 +++++++++++ 5 files changed, 719 insertions(+) create mode 100644 sound/soc/fsl/fsl-pcm-dma.c create mode 100644 sound/soc/fsl/fsl-sai.c create mode 100644 sound/soc/fsl/fsl-sai.h diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index cd088cc..a49b386 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -202,3 +202,22 @@ config SND_SOC_IMX_MC13783 select SND_SOC_IMX_PCM_DMA endif # SND_IMX_SOC + +menuconfig SND_FSL_SOC + tristate "SoC Audio for Freescale FSL CPUs" + help + Say Y or M if you want to add support for codecs attached to + the FSL CPUs. + + This will enable Freeacale SAI, SGT15000 codec. + +if SND_FSL_SOC + +config SND_SOC_FSL_SAI + tristate + +config SND_SOC_FSL_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +endif # SND_FSL_SOC diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 4b5970e..865ac23 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -54,3 +54,10 @@ obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o + +# FSL ARM SAI/SGT15000 Platform Support +snd-soc-fsl-sai-objs := fsl-sai.o +snd-soc-fsl-pcm-objs := fsl-pcm-dma.o + +obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o +obj-$(CONFIG_SND_SOC_FSL_PCM) += snd-soc-fsl-pcm.o diff --git a/sound/soc/fsl/fsl-pcm-dma.c b/sound/soc/fsl/fsl-pcm-dma.c new file mode 100644 index 0000000..c4d925e --- /dev/null +++ b/sound/soc/fsl/fsl-pcm-dma.c @@ -0,0 +1,51 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/dmaengine.h> +#include <sound/dmaengine_pcm.h> +#include "fsl-sai.h" + +static struct snd_pcm_hardware snd_fsl_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = FSL_SAI_DMABUF_SIZE, + .period_bytes_min = 4096, + .period_bytes_max = FSL_SAI_DMABUF_SIZE / TCD_NUMBER, + .periods_min = TCD_NUMBER, + .periods_max = TCD_NUMBER, + .fifo_size = 0, +}; + +static const struct snd_dmaengine_pcm_config fsl_dmaengine_pcm_config = { + .pcm_hardware = &snd_fsl_hardware, + .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, + .prealloc_buffer_size = FSL_SAI_DMABUF_SIZE, +}; + +int fsl_pcm_dma_init(struct platform_device *pdev) +{ + return snd_dmaengine_pcm_register(&pdev->dev, &fsl_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); +} +EXPORT_SYMBOL_GPL(fsl_pcm_dma_init); + +void fsl_pcm_dma_exit(struct platform_device *pdev) +{ + snd_dmaengine_pcm_unregister(&pdev->dev); +} +EXPORT_SYMBOL_GPL(fsl_pcm_dma_exit); diff --git a/sound/soc/fsl/fsl-sai.c b/sound/soc/fsl/fsl-sai.c new file mode 100644 index 0000000..d4c8b44 --- /dev/null +++ b/sound/soc/fsl/fsl-sai.c @@ -0,0 +1,515 @@ +/* + * Freescale SAI ALSA SoC Digital Audio Interface driver. + * + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <sound/core.h> +#include <sound/pcm_params.h> +#include <linux/delay.h> + +#include "fsl-sai.h" + +static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int fsl_dir) +{ + u32 val_cr2, reg_cr2; + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); + + if (fsl_dir == FSL_FMT_TRANSMITTER) + reg_cr2 = SAI_TCR2; + else + reg_cr2 = SAI_RCR2; + + val_cr2 = readl(sai->base + reg_cr2); + switch (clk_id) { + case FSL_SAI_CLK_BUS: + val_cr2 &= ~SAI_CR2_MSEL_MASK; + val_cr2 |= SAI_CR2_MSEL_BUS; + break; + case FSL_SAI_CLK_MAST1: + val_cr2 &= ~SAI_CR2_MSEL_MASK; + val_cr2 |= SAI_CR2_MSEL_MCLK1; + break; + case FSL_SAI_CLK_MAST2: + val_cr2 &= ~SAI_CR2_MSEL_MASK; + val_cr2 |= SAI_CR2_MSEL_MCLK2; + break; + case FSL_SAI_CLK_MAST3: + val_cr2 &= ~SAI_CR2_MSEL_MASK; + val_cr2 |= SAI_CR2_MSEL_MCLK3; + break; + default: + return -EINVAL; + } + writel(val_cr2, sai->base + reg_cr2); + + return 0; +} + +static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + int ret; + + if (dir == SND_SOC_CLOCK_IN) + return 0; + + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's transmitter sysclk: %d\n", + ret); + return ret; + } + + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_RECEIVER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's receiver sysclk: %d\n", + ret); + return ret; + } + + return 0; +} + +static int fsl_sai_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); + u32 tcr2, rcr2; + + if (div_id == FSL_SAI_TX_DIV) { + tcr2 = readl(sai->base + SAI_TCR2); + tcr2 &= ~SAI_CR2_DIV_MASK; + tcr2 |= SAI_CR2_DIV(div); + writel(tcr2, sai->base + SAI_TCR2); + + } else if (div_id == FSL_SAI_RX_DIV) { + rcr2 = readl(sai->base + SAI_RCR2); + rcr2 &= ~SAI_CR2_DIV_MASK; + rcr2 |= SAI_CR2_DIV(div); + writel(rcr2, sai->base + SAI_RCR2); + + } else + return -EINVAL; + + return 0; +} + +static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, + unsigned int fmt, int fsl_dir) +{ + u32 val_cr2, val_cr3, val_cr4, reg_cr2, reg_cr3, reg_cr4; + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); + + if (fsl_dir == FSL_FMT_TRANSMITTER) { + reg_cr2 = SAI_TCR2; + reg_cr3 = SAI_TCR3; + reg_cr4 = SAI_TCR4; + } else { + reg_cr2 = SAI_RCR2; + reg_cr3 = SAI_RCR3; + reg_cr4 = SAI_RCR4; + } + + val_cr2 = readl(sai->base + reg_cr2); + val_cr3 = readl(sai->base + reg_cr3); + val_cr4 = readl(sai->base + reg_cr4); + + if (sai->fbt == FSL_SAI_FBT_MSB) + val_cr4 |= SAI_CR4_MF; + else if (sai->fbt == FSL_SAI_FBT_LSB) + val_cr4 &= ~SAI_CR4_MF; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + val_cr4 |= SAI_CR4_FSE; + val_cr4 |= SAI_CR4_FSP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + val_cr4 |= SAI_CR4_FSP; + val_cr2 &= ~SAI_CR2_BCP; + break; + case SND_SOC_DAIFMT_IB_NF: + val_cr4 &= ~SAI_CR4_FSP; + val_cr2 &= ~SAI_CR2_BCP; + break; + case SND_SOC_DAIFMT_NB_IF: + val_cr4 |= SAI_CR4_FSP; + val_cr2 |= SAI_CR2_BCP; + break; + case SND_SOC_DAIFMT_NB_NF: + val_cr4 &= ~SAI_CR4_FSP; + val_cr2 |= SAI_CR2_BCP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + val_cr2 |= SAI_CR2_BCD_MSTR; + val_cr4 |= SAI_CR4_FSD_MSTR; + break; + case SND_SOC_DAIFMT_CBM_CFM: + val_cr2 &= ~SAI_CR2_BCD_MSTR; + val_cr4 &= ~SAI_CR4_FSD_MSTR; + break; + default: + return -EINVAL; + } + + val_cr3 |= SAI_CR3_TRCE; + + if (fsl_dir == FSL_FMT_RECEIVER) + val_cr2 |= SAI_CR2_SYNC; + + writel(val_cr2, sai->base + reg_cr2); + writel(val_cr3, sai->base + reg_cr3); + writel(val_cr4, sai->base + reg_cr4); + + return 0; + +} + +static int fsl_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + int ret; + + ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's transmitter format: %d\n", + ret); + return ret; + } + + ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_RECEIVER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's receiver format: %d\n", + ret); + return ret; + } + + return 0; +} + +static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); + u32 tcr4, rcr4; + + tcr4 = readl(sai->base + SAI_TCR4); + tcr4 &= ~SAI_CR4_FRSZ_MASK; + tcr4 |= SAI_CR4_FRSZ(2); + writel(tcr4, sai->base + SAI_TCR4); + writel(tx_mask, sai->base + SAI_TMR); + + rcr4 = readl(sai->base + SAI_RCR4); + rcr4 &= ~SAI_CR4_FRSZ_MASK; + rcr4 |= SAI_CR4_FRSZ(2); + writel(rcr4, sai->base + SAI_RCR4); + writel(rx_mask, sai->base + SAI_RMR); + + return 0; +} + +static int fsl_sai_hw_params_tr(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai, int fsl_dir) +{ + u32 val_cr4, val_cr5, reg_cr4, reg_cr5, word_width; + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); + + if (fsl_dir == FSL_FMT_TRANSMITTER) { + reg_cr4 = SAI_TCR4; + reg_cr5 = SAI_TCR5; + } else { + reg_cr4 = SAI_RCR4; + reg_cr5 = SAI_RCR5; + } + + val_cr4 = readl(sai->base + reg_cr4); + val_cr4 &= ~SAI_CR4_SYWD_MASK; + + val_cr5 = readl(sai->base + reg_cr5); + val_cr5 &= ~SAI_CR5_WNW_MASK; + val_cr5 &= ~SAI_CR5_W0W_MASK; + val_cr5 &= ~SAI_CR5_FBT_MASK; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + word_width = 16; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + word_width = 20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + word_width = 24; + break; + default: + return -EINVAL; + } + + val_cr4 |= SAI_CR4_SYWD(word_width); + val_cr5 |= SAI_CR5_WNW(word_width); + val_cr5 |= SAI_CR5_W0W(word_width); + + if (sai->fbt == FSL_SAI_FBT_MSB) + val_cr5 |= SAI_CR5_FBT(word_width - 1); + else if (sai->fbt == FSL_SAI_FBT_LSB) + val_cr5 |= SAI_CR5_FBT(0); + + writel(val_cr4, sai->base + reg_cr4); + writel(val_cr5, sai->base + reg_cr5); + + return 0; + +} + +static int fsl_sai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + int ret; + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai transmitter hw params: %d\n", + ret); + return ret; + } + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_RECEIVER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's receiver hw params: %d\n", + ret); + return ret; + } + + return 0; +} + +static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + unsigned int tcsr, rcsr; + + tcsr = readl(sai->base + SAI_TCSR); + rcsr = readl(sai->base + SAI_RCSR); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + rcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + tcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + writel(rcsr, sai->base + SAI_RCSR); + udelay(10); + writel(tcsr, sai->base + SAI_TCSR); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + tcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + rcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + writel(tcsr, sai->base + SAI_TCSR); + udelay(10); + writel(rcsr, sai->base + SAI_RCSR); + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { + .set_sysclk = fsl_sai_set_dai_sysclk, + .set_clkdiv = fsl_sai_set_dai_clkdiv, + .set_fmt = fsl_sai_set_dai_fmt, + .set_tdm_slot = fsl_sai_set_dai_tdm_slot, + .hw_params = fsl_sai_hw_params, + .trigger = fsl_sai_trigger, +}; + +static int fsl_sai_dai_probe(struct snd_soc_dai *dai) +{ + int ret; + struct fsl_sai *sai = dev_get_drvdata(dai->dev); + + ret = clk_prepare_enable(sai->clk); + if (ret) + return ret; + + writel(0x0, sai->base + SAI_RCSR); + writel(0x0, sai->base + SAI_TCSR); + writel(sai->dma_params_tx.maxburst, sai->base + SAI_TCR1); + writel(sai->dma_params_rx.maxburst, sai->base + SAI_RCR1); + + dai->playback_dma_data = &sai->dma_params_tx; + dai->capture_dma_data = &sai->dma_params_rx; + + snd_soc_dai_set_drvdata(dai, sai); + + return 0; +} + +int fsl_sai_dai_remove(struct snd_soc_dai *dai) +{ + struct fsl_sai *sai = dev_get_drvdata(dai->dev); + + clk_disable_unprepare(sai->clk); + + return 0; +} + +static struct snd_soc_dai_driver fsl_sai_dai = { + .probe = fsl_sai_dai_probe, + .remove = fsl_sai_dai_remove, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_SAI_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_SAI_FORMATS, + }, + .ops = &fsl_sai_pcm_dai_ops, +}; + +static const struct snd_soc_component_driver fsl_component = { + .name = "fsl-sai", +}; + +static int fsl_sai_probe(struct platform_device *pdev) +{ + struct of_phandle_args dma_args; + int index; + struct resource *res; + struct fsl_sai *sai; + int ret = 0; + struct device_node *np = pdev->dev.of_node; + + sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); + if (!sai) + return -ENOMEM; + + sai->fbt = FSL_SAI_FBT_MSB; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sai->base)) { + ret = PTR_ERR(sai->base); + return ret; + } + + sai->clk = devm_clk_get(&pdev->dev, "sai"); + if (IS_ERR(sai->clk)) { + ret = PTR_ERR(sai->clk); + dev_err(&pdev->dev, "Cannot get sai's clock: %d\n", ret); + return ret; + } + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1]; + + ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret; + + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out; + + platform_set_drvdata(pdev, sai); + + return 0; + +out: + snd_soc_unregister_component(&pdev->dev); + return ret; +} + +static int fsl_sai_remove(struct platform_device *pdev) +{ + struct fsl_sai *sai = platform_get_drvdata(pdev); + + fsl_pcm_dma_exit(pdev); + + snd_soc_unregister_component(&pdev->dev); + + clk_disable_unprepare(sai->clk); + + return 0; +} + +static const struct of_device_id fsl_sai_ids[] = { + { .compatible = "fsl,vf610-sai", }, + { /*sentinel*/ }, +}; + +static struct platform_driver fsl_sai_driver = { + .probe = fsl_sai_probe, + .remove = fsl_sai_remove, + + .driver = { + .name = "fsl-sai", + .owner = THIS_MODULE, + .of_match_table = fsl_sai_ids, + }, +}; +module_platform_driver(fsl_sai_driver); + +MODULE_AUTHOR("Xiubo Li, <Li.Xiubo@freescale.com>"); +MODULE_AUTHOR("Alison Wang, <b18965@freescale.com>"); +MODULE_DESCRIPTION("Freescale Soc SAI Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/fsl-sai.h b/sound/soc/fsl/fsl-sai.h new file mode 100644 index 0000000..ab76a8e --- /dev/null +++ b/sound/soc/fsl/fsl-sai.h @@ -0,0 +1,127 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __FSL_SAI_H +#define __FSL_SAI_H + +#include <sound/dmaengine_pcm.h> + +#define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +#define FSL_SAI_DMABUF_SIZE (32 * 1024) +#define TCD_NUMBER 4 +#define EDMA_PRIO_HIGH 6 + +/* SAI Transmit/Recieve Control Register */ +#define SAI_TCSR 0x00 +#define SAI_RCSR 0x80 +#define SAI_CSR_TERE BIT(31) +#define SAI_CSR_FWF BIT(17) +#define SAI_CSR_FRIE BIT(8) +#define SAI_CSR_FRDE BIT(0) + +/* SAI Transmit Data/FIFO/MASK Register */ +#define SAI_TDR 0x20 +#define SAI_TFR 0x40 +#define SAI_TMR 0x60 + +/* SAI Recieve Data/FIFO/MASK Register */ +#define SAI_RDR 0xa0 +#define SAI_RFR 0xc0 +#define SAI_RMR 0xe0 + +/* SAI Transmit and Recieve Configuration 1 Register */ +#define SAI_TCR1 0x04 +#define SAI_RCR1 0x84 + +/* SAI Transmit and Recieve Configuration 2 Register */ +#define SAI_TCR2 0x08 +#define SAI_RCR2 0x88 +#define SAI_CR2_SYNC BIT(30) +#define SAI_CR2_MSEL_MASK (0xff << 26) +#define SAI_CR2_MSEL_BUS 0 +#define SAI_CR2_MSEL_MCLK1 BIT(26) +#define SAI_CR2_MSEL_MCLK2 BIT(27) +#define SAI_CR2_MSEL_MCLK3 (BIT(26)|BIT(27)) +#define SAI_CR2_BCP BIT(25) +#define SAI_CR2_BCD_MSTR BIT(24) +#define SAI_CR2_DIV(x) (x) +#define SAI_CR2_DIV_MASK 0xff + +/* SAI Transmit and Recieve Configuration 3 Register */ +#define SAI_TCR3 0x0c +#define SAI_RCR3 0x8c +#define SAI_CR3_TRCE BIT(16) +#define SAI_CR3_WDFL(x) (x) +#define SAI_CR3_WDFL_MASK 0x1f + +/* SAI Transmit and Recieve Configuration 4 Register */ +#define SAI_TCR4 0x10 +#define SAI_RCR4 0x90 +#define SAI_CR4_FRSZ(x) (((x) - 1) << 16) +#define SAI_CR4_FRSZ_MASK (0x1f << 16) +#define SAI_CR4_SYWD(x) (((x) - 1) << 8) +#define SAI_CR4_SYWD_MASK (0x1f << 8) +#define SAI_CR4_MF BIT(4) +#define SAI_CR4_FSE BIT(3) +#define SAI_CR4_FSP BIT(1) +#define SAI_CR4_FSD_MSTR BIT(0) + +/* SAI Transmit and Recieve Configuration 5 Register */ +#define SAI_TCR5 0x14 +#define SAI_RCR5 0x94 +#define SAI_CR5_WNW(x) (((x) - 1) << 24) +#define SAI_CR5_WNW_MASK (0x1f << 24) +#define SAI_CR5_W0W(x) (((x) - 1) << 16) +#define SAI_CR5_W0W_MASK (0x1f << 16) +#define SAI_CR5_FBT(x) ((x) << 8) +#define SAI_CR5_FBT_MASK (0x1f << 8) + +/* SAI audio dividers */ +#define FSL_SAI_TX_DIV 0 +#define FSL_SAI_RX_DIV 1 + +/* SAI type */ +#define FSL_SAI_DMA BIT(0) +#define FSL_SAI_USE_AC97 BIT(1) +#define FSL_SAI_NET BIT(2) +#define FSL_SAI_TRA_SYN BIT(3) +#define FSL_SAI_REC_SYN BIT(4) +#define FSL_SAI_USE_I2S_SLAVE BIT(5) + +#define FSL_FMT_TRANSMITTER 0 +#define FSL_FMT_RECEIVER 1 + +/* SAI clock sources */ +#define FSL_SAI_CLK_BUS 0 +#define FSL_SAI_CLK_MAST1 1 +#define FSL_SAI_CLK_MAST2 2 +#define FSL_SAI_CLK_MAST3 3 + +enum fsl_sai_fbt { + FSL_SAI_FBT_MSB, + FSL_SAI_FBT_LSB, +}; + +struct fsl_sai { + struct clk *clk; + + void __iomem *base; + + enum fsl_sai_fbt fbt; + + struct snd_dmaengine_dai_dma_data dma_params_rx; + struct snd_dmaengine_dai_dma_data dma_params_tx; +}; + +int fsl_pcm_dma_init(struct platform_device *pdev); +void fsl_pcm_dma_exit(struct platform_device *pdev); + +#endif /* __FSL_SAI_H */ -- 1.8.0
This patch add the SAI's edma mux Tx and Rx support. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- arch/arm/boot/dts/vf610.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 18e3a4c..391f180 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -151,9 +151,11 @@ sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; - interrupts = <0 86 0x04>; clocks = <&clks VF610_CLK_SAI2>; clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; status = "disabled"; }; -- 1.8.0
This patch add and enable SAI device. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- arch/arm/boot/dts/vf610-twr.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 1a58678..e4106dd 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -57,6 +57,12 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; -- 1.8.0
This adds the Document for Freescale SAI driver under Documentation/devicetree/bindings/sound/. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- .../devicetree/bindings/sound/fsl-sai.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt new file mode 100644 index 0000000..267afbd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -0,0 +1,32 @@ +Freescale Synchronous Audio Interface (SAI). + +The SAI is based on I2S module that used communicating with audio codecs, +which provides a synchronous audio interface that supports fullduplex +serial interfaces with frame synchronization such as I2S, AC97, TDM, and +codec/DSP interfaces. + + +Required properties: +- compatible: Compatible list, contains "fsl,vf610-sai". +- reg: Offset and length of the register set for the device. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names : Must include the "sai" entry. +- dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names : Two dmas have to be defined, "tx" and "rx". +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See ../pinctrl/pinctrl-bindings.txt for details of the property values. + +Example: +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; +}; -- 1.8.0
When the CONFIG_REGULATOR is disabled there will be some warnings printed out. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/codecs/sgtl5000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif } static int ldo_regulator_remove(struct snd_soc_codec *codec) { return 0; } + #endif /* @@ -1137,6 +1142,7 @@ static int sgtl5000_resume(struct snd_soc_codec *codec) #define sgtl5000_resume NULL #endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_REGULATOR /* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 @@ -1269,6 +1275,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) return 0; } +#endif static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec) { @@ -1370,6 +1377,7 @@ err_regulator_free: sgtl5000->supplies); if (external_vddd) ldo_regulator_remove(codec); + return ret; } @@ -1391,11 +1399,12 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) if (ret) return ret; +#ifdef CONFIG_REGULATOR /* power up sgtl5000 */ ret = sgtl5000_set_power_regs(codec); if (ret) goto err; - +#endif /* enable small pop, introduce 400ms delay in turning off */ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, SGTL5000_SMALL_POP, @@ -1446,6 +1455,7 @@ err: sgtl5000->supplies); regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); + ldo_regulator_remove(codec); return ret; @@ -1461,6 +1471,7 @@ static int sgtl5000_remove(struct snd_soc_codec *codec) sgtl5000->supplies); regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); + ldo_regulator_remove(codec); return 0; -- 1.8.0
This is the SGTl5000 codec based audio driver supported with both playback and capture dai link implemention. This implementation is only compatible with device tree definition. Signed-off-by: Alison Wang <b18965@freescale.com Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/fsl/Kconfig | 10 +++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl-sgtl5000.c | 208 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 220 insertions(+) create mode 100644 sound/soc/fsl/fsl-sgtl5000.c diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index a49b386..3fbbbf2 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -220,4 +220,14 @@ config SND_SOC_FSL_PCM tristate select SND_SOC_GENERIC_DMAENGINE_PCM +config SND_SOC_FSL_SGTL5000 + tristate "SoC Audio support for FSL boards with sgtl5000" + depends on OF && I2C + select SND_SOC_FSL_SAI + select SND_SOC_FSL_PCM + select SND_SOC_SGTL5000 + help + Say Y if you want to add support for SoC audio on an FSL board with + a sgtl5000 codec. + endif # SND_FSL_SOC diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 865ac23..e8bf0bd 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -58,6 +58,8 @@ obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o # FSL ARM SAI/SGT15000 Platform Support snd-soc-fsl-sai-objs := fsl-sai.o snd-soc-fsl-pcm-objs := fsl-pcm-dma.o +snd-soc-fsl-sgtl5000-objs := fsl-sgtl5000.o obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o obj-$(CONFIG_SND_SOC_FSL_PCM) += snd-soc-fsl-pcm.o +obj-$(CONFIG_SND_SOC_FSL_SGTL5000) += snd-soc-fsl-sgtl5000.o diff --git a/sound/soc/fsl/fsl-sgtl5000.c b/sound/soc/fsl/fsl-sgtl5000.c new file mode 100644 index 0000000..bab85ec --- /dev/null +++ b/sound/soc/fsl/fsl-sgtl5000.c @@ -0,0 +1,208 @@ +/* + * Freeacale ALSA SoC Audio using SGT1500 as codec. + * + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/i2c.h> +#include <linux/clk.h> + +#include "../codecs/sgtl5000.h" +#include "fsl-sai.h" + +static unsigned int sysclk_rate; + +static int fsl_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) +{ + int ret; + struct device *dev = rtd->card->dev; + + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, + sysclk_rate, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(dev, "could not set codec driver clock params :%d\n", + ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_BUS, + sysclk_rate, SND_SOC_CLOCK_OUT); + if (ret) { + dev_err(dev, "could not set cpu dai driver clock params :%d\n", + ret); + return ret; + } + + return 0; +} + +static int sgtl5000_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int channels = params_channels(params); + + /* TODO: The SAI driver should figure this out for us */ + switch (channels) { + case 2: + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, 0); + break; + case 1: + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct snd_soc_ops fsl_sgtl5000_hifi_ops = { + .hw_params = sgtl5000_params, +}; + +static struct snd_soc_dai_link fsl_sgtl5000_dai = { + .name = "HiFi", + .stream_name = "HiFi", + .codec_dai_name = "sgtl5000", + .init = &fsl_sgtl5000_dai_init, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM, + .ops = &fsl_sgtl5000_hifi_ops, +}; + +static const struct snd_soc_dapm_widget fsl_sgtl5000_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Line Out Jack", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static struct snd_soc_card fsl_sgt1500_card = { + .owner = THIS_MODULE, + .num_links = 1, + .dai_link = &fsl_sgtl5000_dai, + .dapm_widgets = fsl_sgtl5000_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(fsl_sgtl5000_dapm_widgets), +}; + +static int fsl_sgtl5000_parse_dt(struct platform_device *pdev) +{ + int ret; + struct device_node *sai_np, *codec_np; + struct clk *codec_clk; + struct i2c_client *codec_dev; + struct device_node *np = pdev->dev.of_node; + + ret = snd_soc_of_parse_card_name(&fsl_sgt1500_card, "model"); + if (ret) + return ret; + + ret = snd_soc_of_parse_audio_routing(&fsl_sgt1500_card, + "audio-routing"); + if (ret) + return ret; + + sai_np = of_parse_phandle(np, "saif-controller", 0); + if (!sai_np) { + dev_err(&pdev->dev, "\"saif-controller\" phandle missing or " + "invalid\n"); + return -EINVAL; + } + fsl_sgtl5000_dai.cpu_of_node = sai_np; + fsl_sgtl5000_dai.platform_of_node = sai_np; + + codec_np = of_parse_phandle(np, "audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "\"audio-codec\" phandle missing or " + "invalid\n"); + ret = -EINVAL; + goto sai_np_fail; + } + fsl_sgtl5000_dai.codec_of_node = codec_np; + + codec_dev = of_find_i2c_device_by_node(codec_np); + if (!codec_dev) { + dev_err(&pdev->dev, "failed to find codec platform device\n"); + ret = PTR_ERR(codec_dev); + goto codec_np_fail; + } + + codec_clk = devm_clk_get(&codec_dev->dev, NULL); + if (IS_ERR(codec_clk)) { + dev_err(&pdev->dev, "failed to get codec clock\n"); + ret = PTR_ERR(codec_clk); + goto codec_np_fail; + } + + sysclk_rate = clk_get_rate(codec_clk); + +codec_np_fail: + of_node_put(codec_np); +sai_np_fail: + of_node_put(sai_np); + + return ret; +} + +static int fsl_sgtl5000_probe(struct platform_device *pdev) +{ + int ret; + + fsl_sgt1500_card.dev = &pdev->dev; + + ret = fsl_sgtl5000_parse_dt(pdev); + if (ret) { + dev_err(&pdev->dev, + "parse sgtl5000 device tree failed :%d\n", + ret); + return ret; + } + + ret = snd_soc_register_card(&fsl_sgt1500_card); + if (ret) { + dev_err(&pdev->dev, "register soc sound card failed :%d\n", + ret); + return ret; + } + + return 0; +} + +static int fsl_sgtl5000_remove(struct platform_device *pdev) +{ + snd_soc_unregister_card(&fsl_sgt1500_card); + + return 0; +} + +static const struct of_device_id fsl_sgtl5000_dt_ids[] = { + { .compatible = "fsl,vf610-sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_sgtl5000_dt_ids); + +static struct platform_driver fsl_sgtl5000_driver = { + .driver = { + .name = "fsl-sgtl5000", + .owner = THIS_MODULE, + .of_match_table = fsl_sgtl5000_dt_ids, + }, + .probe = fsl_sgtl5000_probe, + .remove = fsl_sgtl5000_remove, +}; +module_platform_driver(fsl_sgtl5000_driver); + +MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>"); +MODULE_DESCRIPTION("Freescale SGTL5000 ASoC driver"); +MODULE_LICENSE("GPL"); -- 1.8.0
This patch add and enable SGT15000 codec support, and also specified the corresponding SAI node. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com --- arch/arm/boot/dts/vf610-twr.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index e4106dd..a2d9214 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -34,6 +34,19 @@ }; }; + sound { + compatible = "fsl,vf610-sgtl5000"; + model = "vf610-sgtl5000"; + saif-controller = <&sai2>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + }; + }; &fec0 { @@ -55,6 +68,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_1>; status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks VF610_CLK_SAI2>; + }; }; &sai2 { -- 1.8.0
This adds the Document for Freescale VF610 sound driver under Documentation/devicetree/bindings/sound/. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- .../devicetree/bindings/sound/fsl-sgtl5000.txt | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt diff --git a/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt new file mode 100644 index 0000000..43e350f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt @@ -0,0 +1,52 @@ +Freescale VF610 audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,vf610-sgtl5000" +- model: The user-visible name of this sound complex. +- saif-controllers: The phandle list of the SAI controller. +- audio-codec: The phandle of the SGTL5000 audio codec. +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + -- Power supplies: + * Mic Bias + + -- SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + -- Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +Example: + +sound { + compatible = "fsl,vf610-sgtl5000"; + model = "vf610-sgtl5000"; + saif-controller = <&sai2>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; +}; + +&i2c0 { + ... + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks VF610_CLK_SAI2>; + }; +}; -- 1.8.0
Hi, Xiubo Li <Li.Xiubo@freescale.com> wrote: [...]
diff --git a/sound/soc/fsl/fsl-pcm-dma.c b/sound/soc/fsl/fsl-pcm-dma.c new file mode 100644 index 0000000..c4d925e --- /dev/null +++ b/sound/soc/fsl/fsl-pcm-dma.c @@ -0,0 +1,51 @@ [...] + +static int fsl_sai_probe(struct platform_device *pdev) +{ + struct of_phandle_args dma_args; + int index; + struct resource *res; + struct fsl_sai *sai; + int ret = 0; + struct device_node *np = pdev->dev.of_node; + + sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); + if (!sai) + return -ENOMEM; + + sai->fbt = FSL_SAI_FBT_MSB; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sai->base)) { + ret = PTR_ERR(sai->base); + return ret;
could be: return PTR_ERR(sai->base); [...]
+static const struct of_device_id fsl_sai_ids[] = { + { .compatible = "fsl,vf610-sai", }, + { /*sentinel*/ },
The comma after the last entry in a struct initializer is there to make patches that append another entry cleaner. Since this entry is and always must be the last entry, the comma is useless here.
diff --git a/sound/soc/fsl/fsl-sai.h b/sound/soc/fsl/fsl-sai.h new file mode 100644 index 0000000..ab76a8e --- /dev/null +++ b/sound/soc/fsl/fsl-sai.h @@ -0,0 +1,127 @@ +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __FSL_SAI_H +#define __FSL_SAI_H + +#include <sound/dmaengine_pcm.h> + +#define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +#define FSL_SAI_DMABUF_SIZE (32 * 1024) +#define TCD_NUMBER 4 +#define EDMA_PRIO_HIGH 6 + strange indentation with mixed spaces and tabs.
+/* SAI Transmit and Recieve Configuration 2 Register */ +#define SAI_TCR2 0x08 +#define SAI_RCR2 0x88 +#define SAI_CR2_SYNC BIT(30) +#define SAI_CR2_MSEL_MASK (0xff << 26) +#define SAI_CR2_MSEL_BUS 0 +#define SAI_CR2_MSEL_MCLK1 BIT(26) +#define SAI_CR2_MSEL_MCLK2 BIT(27) +#define SAI_CR2_MSEL_MCLK3 (BIT(26)|BIT(27))
spaces around '|'? Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________
Am Donnerstag, den 17.10.2013, 17:01 +0800 schrieb Xiubo Li:
This adds the Document for Freescale VF610 sound driver under Documentation/devicetree/bindings/sound/.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- .../devicetree/bindings/sound/fsl-sgtl5000.txt | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt
diff --git a/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt new file mode 100644 index 0000000..43e350f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt
This document name is overly generic, there are more than one FSL platforms with SGTL5000 codecs. Please include the vf610 here.
@@ -0,0 +1,52 @@ +Freescale VF610 audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,vf610-sgtl5000" +- model: The user-visible name of this sound complex. +- saif-controllers: The phandle list of the SAI controller. +- audio-codec: The phandle of the SGTL5000 audio codec. +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + -- Power supplies: + * Mic Bias + + -- SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + -- Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +Example: + +sound { + compatible = "fsl,vf610-sgtl5000"; + model = "vf610-sgtl5000"; + saif-controller = <&sai2>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; +}; + +&i2c0 { + ... + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks VF610_CLK_SAI2>; + }; +};
-- Pengutronix e.K. | Lucas Stach | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Hi, On Thu, Oct 17, 2013 at 05:01:14PM +0800, Xiubo Li wrote:
When the CONFIG_REGULATOR is disabled there will be some warnings printed out.
A little confused by the title. But after looking at the comments, is the patch just gonna add some debug info for the case when the CONFIG_REGULATOR's been un-selected? Well first, I think at least the title should be more explicit. And second, the necessity of this patch might just a little... if CONFIG_REGULATOR is required to power it up, why not turn it on.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/codecs/sgtl5000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000
Why there's FSL_SGTL5000 here? Not supposed to be CONFIG_REGULATOR?
+ return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif }
static int ldo_regulator_remove(struct snd_soc_codec *codec) { return 0; } +
I don't think it's fair to add a meaningless line. It doesn't make any sense according to the title and comments.
#endif
/* @@ -1137,6 +1142,7 @@ static int sgtl5000_resume(struct snd_soc_codec *codec) #define sgtl5000_resume NULL #endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_REGULATOR
The inline regulator-related functions are already have REGULATOR dependency. Is that necessary to put an additional one here?
/* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 @@ -1269,6 +1275,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
return 0; } +#endif
static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec) { @@ -1370,6 +1377,7 @@ err_regulator_free: sgtl5000->supplies); if (external_vddd) ldo_regulator_remove(codec); +
Pls drop this.
return ret;
} @@ -1391,11 +1399,12 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) if (ret) return ret;
+#ifdef CONFIG_REGULATOR /* power up sgtl5000 */ ret = sgtl5000_set_power_regs(codec); if (ret) goto err; - +#endif /* enable small pop, introduce 400ms delay in turning off */ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, SGTL5000_SMALL_POP, @@ -1446,6 +1455,7 @@ err: sgtl5000->supplies); regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); +
Ditto
ldo_regulator_remove(codec);
return ret; @@ -1461,6 +1471,7 @@ static int sgtl5000_remove(struct snd_soc_codec *codec) sgtl5000->supplies); regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); +
Ditto Best regards, Nicolin Chen
ldo_regulator_remove(codec);
return 0; -- 1.8.0
Hi, Xiubo Li <Li.Xiubo@freescale.com> wrote:
When the CONFIG_REGULATOR is disabled there will be some warnings printed out.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/codecs/sgtl5000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif
This looks wrong to me, as this will disable the error for unsolicited platforms in a multi arch kernel!
static int ldo_regulator_remove(struct snd_soc_codec *codec) { return 0; } + #endif
Why do you add an extra empty line here? Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________
Hi, Xiubo Li <Li.Xiubo@freescale.com> wrote: The subject has a wrong name for the codec "SGT1..." instead of "SGTL...", which will make it difficult to search for this thread in mail archives or in commit messages once this patches should be applied! Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________
Xiubo Li wrote:
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res);
Why not use of_iomap()?
On 10/17/2013 02:15 PM, Timur Tabi wrote:
Xiubo Li wrote:
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res);
Why not use of_iomap()?
Because it won't check for conflicting resource regions. - Lars
Lars-Peter Clausen wrote:
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res);
Why not use of_iomap()? Because it won't check for conflicting resource regions.
Maybe I've been out of the loop for too long, but why is that a particular problem with this driver?
On 10/17/2013 03:22 PM, Timur Tabi wrote:
Lars-Peter Clausen wrote:
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res);
Why not use of_iomap()? Because it won't check for conflicting resource regions.
Maybe I've been out of the loop for too long, but why is that a particular problem with this driver?
It is usually something you'd want to check in general to make sure that you don't have multiple device that access the same iomem region at the same time. - Lars
Lars-Peter Clausen wrote:
Maybe I've been out of the loop for too long, but why is that a particular problem with this driver?
It is usually something you'd want to check in general to make sure that you don't have multiple device that access the same iomem region at the same time.
I understand that, but I'm trying to figure out why of_iomap() is okay for hundreds of other drivers, but not this one. I've used it dozens of times myself, without ever worrying about overlapping regions.
On 10/17/2013 03:37 PM, Timur Tabi wrote:
Lars-Peter Clausen wrote:
Maybe I've been out of the loop for too long, but why is that a particular problem with this driver?
It is usually something you'd want to check in general to make sure that you don't have multiple device that access the same iomem region at the same time.
I understand that, but I'm trying to figure out why of_iomap() is okay for hundreds of other drivers, but not this one. I've used it dozens of times myself, without ever worrying about overlapping regions.
The driver would work fine with just of_iomap(). But the resource range check comes basically for free and it does help to catch errors, so I'd recommend on using it rather than not using it. - Lars
On Thu, Oct 17, 2013 at 03:51:54PM +0200, Lars-Peter Clausen wrote:
On 10/17/2013 03:37 PM, Timur Tabi wrote:
I understand that, but I'm trying to figure out why of_iomap() is okay for hundreds of other drivers, but not this one. I've used it dozens of times myself, without ever worrying about overlapping regions.
The driver would work fine with just of_iomap(). But the resource range check comes basically for free and it does help to catch errors, so I'd recommend on using it rather than not using it.
There's also the fact that it's a devm_ function which means less error handling code that we can break which is nice. There's probably a case for an improved OF helper here...
On 10/17/2013 11:01 AM, Xiubo Li wrote: [...]
+static int fsl_sai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + int ret; + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai transmitter hw params: %d\n", + ret); + return ret; + } + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_RECEIVER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's receiver hw params: %d\n", + ret); + return ret; + }
Shouldn't, depending on the substream direction, either transmit or receiver be configured, instead of always configuring both?
+ + return 0; +} + +static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + unsigned int tcsr, rcsr; + + tcsr = readl(sai->base + SAI_TCSR); + rcsr = readl(sai->base + SAI_RCSR); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + rcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + tcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + writel(rcsr, sai->base + SAI_RCSR); + udelay(10); + writel(tcsr, sai->base + SAI_TCSR); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + tcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + rcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + writel(tcsr, sai->base + SAI_TCSR); + udelay(10); + writel(rcsr, sai->base + SAI_RCSR); + break; + default: + return -EINVAL; + } +
Same here, shouldn't tx and rx be started independently depending on the substream direction?
+ return 0; +} + +static struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
const
+ .set_sysclk = fsl_sai_set_dai_sysclk, + .set_clkdiv = fsl_sai_set_dai_clkdiv, + .set_fmt = fsl_sai_set_dai_fmt, + .set_tdm_slot = fsl_sai_set_dai_tdm_slot, + .hw_params = fsl_sai_hw_params, + .trigger = fsl_sai_trigger, +}; [...] +static const struct snd_soc_component_driver fsl_component = { + .name = "fsl-sai", +}; + +static int fsl_sai_probe(struct platform_device *pdev) +{ [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
+ + ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret; + + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out; + + platform_set_drvdata(pdev, sai); + + return 0; + +out: + snd_soc_unregister_component(&pdev->dev); + return ret; +}
Hi,
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sai->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sai->base)) { + ret = PTR_ERR(sai->base); + return ret;
could be: return PTR_ERR(sai->base);
Yes，This looks better.
+#define FSL_SAI_DMABUF_SIZE (32 * 1024) +#define TCD_NUMBER 4 +#define EDMA_PRIO_HIGH 6 + strange indentation with mixed spaces and tabs.
This will be revised in the next version.
+#define SAI_CR2_MSEL_MCLK3 (BIT(26)|BIT(27))
spaces around '|'?
And this too. -- BRS, Xiubo
Hi,
Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt
diff --git a/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt new file mode 100644 index 0000000..43e350f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sgtl5000.txt
This document name is overly generic, there are more than one FSL platforms with SGTL5000 codecs. Please include the vf610 here.
Yes, it is. This will be renamed to "fsl_vf610_audio_sgt15000.txt" or others. Thanks, -- BRS, Xiubo
I understand that, but I'm trying to figure out why of_iomap() is okay for hundreds of other drivers, but not this one. I've used it dozens of times myself, without ever worrying about overlapping regions.
The driver would work fine with just of_iomap(). But the resource range check comes basically for free and it does help to catch errors, so I'd recommend on using it rather than not using it.
There's also the fact that it's a devm_ function which means less error handling code that we can break which is nice. There's probably a case for an improved OF helper here...
Using this instead of of_iomap() is because "devm_" and resource range check as Lars and Mark said, and there are more than one SAI device here which will be added later, maybe the resource range check is needed. Thanks. -- BRS Xiubo
On Thu, Oct 17, 2013 at 05:01:14PM +0800, Xiubo Li wrote:
@@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif }
If these systems don't actually need the internal regulator then should they not be trying to enable it? Alternatively if it's OK to ignore this then why is this conditional in the board? If this is something that it's safe to ignore then it should either be ignored all the time or should be controlled by platform data not by a compile time #define.
On Thu, Oct 17, 2013 at 05:01:17PM +0800, Xiubo Li wrote:
+ -- Power supplies: + * Mic Bias + + -- SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT
Things that are part of the CODEC should be part of the CODEC binding and this binding should reference that - this way the information doesn't have to be replicated by all boards using the CODEC and if new devices are supported by the CODEC driver then only that needs updating hopefully.
On Thu, Oct 17, 2013 at 05:01:15PM +0800, Xiubo Li wrote:
+ ret = snd_soc_register_card(&fsl_sgt1500_card); + if (ret) { + dev_err(&pdev->dev, "register soc sound card failed :%d\n", + ret); + return ret; + }
Use the newly added devm_snd_soc_register_card() (in -next).
When the CONFIG_REGULATOR is disabled there will be some warnings printed out.
A little confused by the title. But after looking at the comments, is the patch just gonna add some debug info for the case when the CONFIG_REGULATOR's been un-selected?
Well first, I think at least the title should be more explicit. And second, the necessity of this patch might just a little... if CONFIG_REGULATOR is required to power it up, why not turn it on.
Sorry, I will add some more detail and explicit description about this patch. In VF610 board there has not Power Manager module. So if the CONFIG_REGULATOR is turned on the SGTL5000 cannot be brought up correctly. If it's turned off there will also some other errors for the SGTL5000 codec driver using the CONFIG_REGULATOR mirco not very correctly.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- sound/soc/codecs/sgtl5000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct
snd_soc_codec *codec,
struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000
Why there's FSL_SGTL5000 here? Not supposed to be CONFIG_REGULATOR?
I will enhance this patch later. Using CONFIG_SND_SOC_FSL_SGTL5000 instead of CONFIG_REGULATOR here just for not affecting other boards.
static int ldo_regulator_remove(struct snd_soc_codec *codec) { return 0; } +
I don't think it's fair to add a meaningless line. It doesn't make any sense according to the title and comments.
I will drop it later.
#endif
/* @@ -1137,6 +1142,7 @@ static int sgtl5000_resume(struct snd_soc_codec *codec) #define sgtl5000_resume NULL #endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_REGULATOR
The inline regulator-related functions are already have REGULATOR dependency. Is that necessary to put an additional one here?
If not, the " warning: 'XXXXX' defined but not used [-Wunused-function] " log will print out. This patch will be enhanced later.
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif
This looks wrong to me, as this will disable the error for unsolicited platforms in a multi arch kernel!
The CONFIG_SND_SOC_FSL_SGTL5000 micro will be renamed to CONFIG_SND_SOC_FSL_SGTL5000_VF610. In VF610, there has not Power Manager Module, so whether the CONFIG_REGULATOR is enable or Disabled, there will always some errors booting...
static int ldo_regulator_remove(struct snd_soc_codec *codec) { return 0; } + #endif
Why do you add an extra empty line here?
This will be remove later.
+static int fsl_sai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + int ret; + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai transmitter hw params: %d\n", + ret); + return ret; + } + + ret = fsl_sai_hw_params_tr(substream, params, cpu_dai, + FSL_FMT_RECEIVER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's receiver hw params: %d\n", + ret); + return ret; + }
Shouldn't, depending on the substream direction, either transmit or receiver be configured, instead of always configuring both?
Yes, this can be configed separately. Please see the next version.
+ + return 0; +} + +static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + unsigned int tcsr, rcsr; + + tcsr = readl(sai->base + SAI_TCSR); + rcsr = readl(sai->base + SAI_RCSR); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + rcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + tcsr |= SAI_CSR_TERE | SAI_CSR_FRDE; + writel(rcsr, sai->base + SAI_RCSR); + udelay(10); + writel(tcsr, sai->base + SAI_TCSR); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + tcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + rcsr &= ~(SAI_CSR_TERE | SAI_CSR_FRDE); + writel(tcsr, sai->base + SAI_TCSR); + udelay(10); + writel(rcsr, sai->base + SAI_RCSR); + break; + default: + return -EINVAL; + } +
Same here, shouldn't tx and rx be started independently depending on the substream direction?
But this couldn't, from the SAI's spec we can see that: ------ The SAI transmitter and receiver can be configured to operate with synchronous bit clock and frame sync. 1), If the transmitter bit clock and frame sync are to be used by both the transmitter and receiver: * The transmitter must be configured for asynchronous operation and the receiver for synchronous operation. * In synchronous mode, the receiver is enabled only when both the transmitter and receiver are enabled. * It is recommended that the transmitter is the last enabled and the first disabled. 2), If the receiver bit clock and frame sync are to be used by both the transmitter and receiver: * The receiver must be configured for asynchronous operation and the transmitter for synchronous operation. * In synchronous mode, the transmitter is enabled only when both the receiver and transmitter are both enabled. * It is recommended that the receiver is the last enabled and the first disabled. ------ The receiver and transmitter should be both enabled at the same time if any of them is alive.
+ return 0; +} + +static struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
const
Please see the next version.
+ -- Power supplies: + * Mic Bias + + -- SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT
Things that are part of the CODEC should be part of the CODEC binding and this binding should reference that - this way the information doesn't have to be replicated by all boards using the CODEC and if new devices are supported by the CODEC driver then only that needs updating hopefully.
Yes, the "-- SGTL5000 pins:" should be in the CODEC binding. But, actually the CODEC binding hasn't any reference about this. So I added it here, but not very sure.
+ ret = snd_soc_register_card(&fsl_sgt1500_card); + if (ret) { + dev_err(&pdev->dev, "register soc sound card failed :%d\n", + ret); + return ret; + }
Use the newly added devm_snd_soc_register_card() (in -next).
Okey, Please see the next version.
Hi,
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1f4093f..4e2e4c9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif
This looks wrong to me, as this will disable the error for unsolicited platforms in a multi arch kernel!
The CONFIG_SND_SOC_FSL_SGTL5000 micro will be renamed to CONFIG_SND_SOC_FSL_SGTL5000_VF610. In VF610, there has not Power Manager Module, so whether the CONFIG_REGULATOR is enable or Disabled, there will always some errors booting...
Yes, but you are altering code that may be run on a different machine than VF610 in a multiarch kernel! You should have a RUNTIME check for the machine type if you need to do machine type specific stuff. Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________
Xiubo Li-B47053 wrote:
The CONFIG_SND_SOC_FSL_SGTL5000 micro will be renamed to CONFIG_SND_SOC_FSL_SGTL5000_VF610. In VF610, there has not Power Manager Module, so whether the CONFIG_REGULATOR is enable or Disabled, there will always some errors booting...
That's just not acceptable. You have to fix the code so that it works with CONFIG_REGULATOR both set and not set.
+static int fsl_sai_probe(struct platform_device *pdev) { [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
Yes, the dma engine interface has already parsed the slave_id while the dma customer requesting one dma channel. Though this also could be a way to pass the slave_id to dma driver, but the dma driver uses the way while requesting dma channels. So I'll drop this code later.
On Mon, Oct 21, 2013 at 07:24:56AM +0000, Xiubo Li-B47053 wrote:
Yes, the "-- SGTL5000 pins:" should be in the CODEC binding. But, actually the CODEC binding hasn't any reference about this.
So I added it here, but not very sure.
Please add them to the CODEC binding instead.
On Thu, Oct 17, 2013 at 05:01:10PM +0800, Xiubo Li wrote:
+static struct snd_pcm_hardware snd_fsl_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = FSL_SAI_DMABUF_SIZE, + .period_bytes_min = 4096, + .period_bytes_max = FSL_SAI_DMABUF_SIZE / TCD_NUMBER, + .periods_min = TCD_NUMBER, + .periods_max = TCD_NUMBER, + .fifo_size = 0, +};
There's a patch in -next that lets the generic dmaengine code figure out some settings from the dmacontroller rather than requiring the driver to explicitly provide configuration - it's "ASoC: dmaengine-pcm: Provide default config". Please update your driver to use this, or let's work out what it doesn't do any try to fix it.
+ ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's transmitter sysclk: %d\n", + ret); + return ret; + } + + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_RECEIVER);
As other people have commented these should be exposed as separate clocks rather than set in sync, unless there's some hardware reason they need to be identical. If that is the case then a comment explaining the limitation would be good. Similarly with several of the other functions.
+int fsl_sai_dai_remove(struct snd_soc_dai *dai) +{ + struct fsl_sai *sai = dev_get_drvdata(dai->dev); + + clk_disable_unprepare(sai->clk);
It'd be a bit nicer to only enable the clock while the driver is actively being used rather than all the time the system is powered up but it's not a blocker for merge.
+ ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret;
There's a devm_snd_soc_register_component() in -next, please use that.
+ + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out; + + platform_set_drvdata(pdev, sai);
These should go before the driver is registered with the subsystem otherwise you've got a race where something might try to use the driver before init is finished.
+static int fsl_sai_remove(struct platform_device *pdev) +{ + struct fsl_sai *sai = platform_get_drvdata(pdev); + + fsl_pcm_dma_exit(pdev); + + snd_soc_unregister_component(&pdev->dev);
Similarly here, unregister from the subsystem then clean up after.
+#define SAI_CR5_FBT(x) ((x) << 8) +#define SAI_CR5_FBT_MASK (0x1f << 8) + +/* SAI audio dividers */ +#define FSL_SAI_TX_DIV 0 +#define FSL_SAI_RX_DIV 1
Make the namespacing consistent please - for preference use FSL_SAI always.
Hi Dan, Vinod,
+static int fsl_sai_probe(struct platform_device *pdev) { [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
What do you think about the DMA slave_id ? I have been noticed by one colleague that this should be parsed here, which is from your opinions ?
+ + ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret; + + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out;
@@ -883,14 +883,19 @@ static int ldo_regulator_register(struct snd_soc_codec *codec, struct regulator_init_data *init_data, int voltage) { +#ifdef CONFIG_SND_SOC_FSL_SGTL5000 + return 0; +#else dev_err(codec->dev, "this setup needs regulator support in the kernel\n"); return -EINVAL; +#endif }
If these systems don't actually need the internal regulator then should they not be trying to enable it?
Yes, I think do not trying to enable the regulator is much better.
Alternatively if it's OK to ignore this then why is this conditional in the board?
The CONFIG_SND_SOC_FSL_SGTL5000 micro maybe confuse you and others. And it should be CONFIG_SND_SOC_FSL_SGTL5000_VF610....
+static struct snd_pcm_hardware snd_fsl_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = FSL_SAI_DMABUF_SIZE, + .period_bytes_min = 4096, + .period_bytes_max = FSL_SAI_DMABUF_SIZE / TCD_NUMBER, + .periods_min = TCD_NUMBER, + .periods_max = TCD_NUMBER, + .fifo_size = 0, +};
There's a patch in -next that lets the generic dmaengine code figure out some settings from the dmacontroller rather than requiring the driver to explicitly provide configuration - it's "ASoC: dmaengine-pcm: Provide default config". Please update your driver to use this, or let's work out what it doesn't do any try to fix it.
I will do a research.
+ ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_TRANSMITTER); + if (ret) { + dev_err(cpu_dai->dev, + "Cannot set sai's transmitter sysclk: %d\n", + ret); + return ret; + } + + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, + FSL_FMT_RECEIVER);
As other people have commented these should be exposed as separate clocks rather than set in sync, unless there's some hardware reason they need to be identical. If that is the case then a comment explaining the limitation would be good.
Similarly with several of the other functions.
As I have replied before, there is one function couldn't be separated for the hardware limitation.
+int fsl_sai_dai_remove(struct snd_soc_dai *dai) { + struct fsl_sai *sai = dev_get_drvdata(dai->dev); + + clk_disable_unprepare(sai->clk);
It'd be a bit nicer to only enable the clock while the driver is actively being used rather than all the time the system is powered up but it's not a blocker for merge.
Actully there are to "XXX_probe" functions and two "XXX_remove" functions: fsl_sai_dai_probe() and fsl_sai_dai_remove() are callbacks of the ASoC subsystem. And in fsl_sai_dai_probe() needs to read/write the SAI controller's registers, so the clk_enable_prepare() must be here and clk_disable_unprepare() in fsl_sai_dai_remove(). fsl_sai_probe() and fsl_sai_remove() are the driver's probe and remove interfaces. So the "+ clk_disable_unprepare(sai->clk);" sentence in fsl_sai_remove() will be removed later.
+ ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret;
There's a devm_snd_soc_register_component() in -next, please use that.
See the next version.
+ + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out; + + platform_set_drvdata(pdev, sai);
These should go before the driver is registered with the subsystem otherwise you've got a race where something might try to use the driver before init is finished.
+static int fsl_sai_remove(struct platform_device *pdev) { + struct fsl_sai *sai = platform_get_drvdata(pdev); + + fsl_pcm_dma_exit(pdev); + + snd_soc_unregister_component(&pdev->dev);
Similarly here, unregister from the subsystem then clean up after.
See the next version.
+#define SAI_CR5_FBT(x) ((x) << 8) +#define SAI_CR5_FBT_MASK (0x1f << 8) + +/* SAI audio dividers */ +#define FSL_SAI_TX_DIV 0 +#define FSL_SAI_RX_DIV 1
Make the namespacing consistent please - for preference use FSL_SAI always.
See the next version.
+static struct snd_pcm_hardware snd_fsl_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = FSL_SAI_DMABUF_SIZE, + .period_bytes_min = 4096, + .period_bytes_max = FSL_SAI_DMABUF_SIZE / TCD_NUMBER, + .periods_min = TCD_NUMBER, + .periods_max = TCD_NUMBER, + .fifo_size = 0, +};
There's a patch in -next that lets the generic dmaengine code figure out some settings from the dmacontroller rather than requiring the driver to explicitly provide configuration - it's "ASoC: dmaengine-pcm: Provide default config". Please update your driver to use this, or let's work out what it doesn't do any try to fix it.
I couldn't find the patch in the next and other trees. Does this patch has been submitted to the -next tree ? Or could you tell me how to find the patch please? Thanks very much.
On Tue, Oct 29, 2013 at 12:00:57PM +0800, Xiubo Li-B47053 wrote:
There's a patch in -next that lets the generic dmaengine code figure out some settings from the dmacontroller rather than requiring the driver to explicitly provide configuration - it's "ASoC: dmaengine-pcm: Provide default config". Please update your driver to use this, or let's work out what it doesn't do any try to fix it.
I couldn't find the patch in the next and other trees. Does this patch has been submitted to the -next tree ? Or could you tell me how to find the patch please?
Are you using broonie's repository? git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git If you searched the title in for-next branch, you should have found it. Best regards, Nicolin Chen
-----Original Message----- From: Chen Guangyu-B42378 Sent: Tuesday, October 29, 2013 12:02 PM To: Xiubo Li-B47053 Cc: Mark Brown; Guo Shawn-R65073; timur@tabi.org; lgirdwood@gmail.com; Jin Zhengxiong-R64188; rob.herring@calxeda.com; pawel.moll@arm.com; mark.rutland@arm.com; swarren@wwwdotorg.org; ian.campbell@citrix.com; rob@landley.net; linux@arm.linux.org.uk; perex@perex.cz; tiwai@suse.de; grant.likely@linaro.org; Estevam Fabio-R49496; LW@KARO-electronics.de; oskar@scara.com; shawn.guo@linaro.org; Wang Huan-B18965; devicetree@vger.kernel.org; linux-doc@vger.kernel.org; linux- kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; alsa- devel@alsa-project.org; linuxppc-dev@lists.ozlabs.org Subject: Re: [PATCHv1 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.
On Tue, Oct 29, 2013 at 12:00:57PM +0800, Xiubo Li-B47053 wrote:
There's a patch in -next that lets the generic dmaengine code figure out some settings from the dmacontroller rather than requiring the driver to explicitly provide configuration - it's "ASoC: dmaengine-pcm: Provide default config". Please update your driver to use this, or let's work out what it doesn't do any try to fix it.
I couldn't find the patch in the next and other trees. Does this patch has been submitted to the -next tree ? Or could you tell me how to find the patch please?
Are you using broonie's repository?
NO.
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
If you searched the title in for-next branch, you should have found it.
Yes, find it. Thanks very much. -- Xiubo
On Mon, Oct 28, 2013 at 05:58:42AM +0000, Xiubo Li-B47053 wrote:
Hi Dan, Vinod,
+static int fsl_sai_probe(struct platform_device *pdev) { [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
What do you think about the DMA slave_id ? I have been noticed by one colleague that this should be parsed here, which is from your opinions ? Sure slave_id can be parsed here, but IMO it should be programmed via the dma_slave_confog into the respective channel
-- ~Vinod
+ + ret = snd_soc_register_component(&pdev->dev, &fsl_component, + &fsl_sai_dai, 1); + if (ret) + return ret; + + ret = fsl_pcm_dma_init(pdev); + if (ret) + goto out;
--
+static int fsl_sai_probe(struct platform_device *pdev) { [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
What do you think about the DMA slave_id ? I have been noticed by one colleague that this should be parsed here, which is from your opinions ? Sure slave_id can be parsed here, but IMO it should be programmed via the dma_slave_confog into the respective channel
Actually, these are parsed for cpu_dai->playback_dma_data and cpu_dai->capture_dma_data dynamically, whose type is struct dma_slave_config. And now I must parse them here, because the platform eDMA driver's newest version will check and use the slave_ids to select and configure the eDMA channels via dma_device->device_control(). -- Xiubo
On 11/12/2013 08:35 AM, Li Xiubo wrote:
+static int fsl_sai_probe(struct platform_device *pdev) { [...] + + sai->dma_params_rx.addr = res->start + SAI_RDR; + sai->dma_params_rx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "rx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_rx.slave_id = dma_args.args[1]; + + sai->dma_params_tx.addr = res->start + SAI_TDR; + sai->dma_params_tx.maxburst = 6; + index = of_property_match_string(np, "dma-names", "tx"); + ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, + &dma_args); + if (ret) + return ret; + sai->dma_params_tx.slave_id = dma_args.args[1];
The driver should not have to manually parse the dma devicetree properties, this is something that should be handled by the dma engine driver.
What do you think about the DMA slave_id ? I have been noticed by one colleague that this should be parsed here, which is from your opinions ? Sure slave_id can be parsed here, but IMO it should be programmed via the dma_slave_confog into the respective channel
Actually, these are parsed for cpu_dai->playback_dma_data and cpu_dai->capture_dma_data dynamically, whose type is struct dma_slave_config.
And now I must parse them here, because the platform eDMA driver's newest version will check and use the slave_ids to select and configure the eDMA channels via dma_device->device_control().
Parsing them here is a layering violation. The format of the DMA specifier depends on the DMA controller. A DMA slave should not make any assumptions about how the specifier looks like, it should not even look at them. You should fix the DMA controller driver to work without slave_id in the devicetree case. - Lars
participants (10)
-
Lars-Peter Clausen -
Li Xiubo -
Lothar Waßmann -
Lucas Stach -
Mark Brown -
Nicolin Chen -
Timur Tabi -
Vinod Koul -
Xiubo Li
-
Xiubo Li-B47053