[alsa-devel] [PATCH] ALSA: firewire-tascam: add note for FE-8
TASCAM FE-8 is the rest of model in TASCAM FireWire series. This device has no functionality to process audio signal and MIDI messages. Instead, it transfers control messages to host system corresponding to operations for some faders, buttons and knobs on its surface.
Unlike the other devices in this series, the control messages are transmitted by asynchronous transactions. Some registers of device are used for registration of destination address for the transaction. The transaction includes quadlet-aligned data up to 32 quadlets.
Userspace applications can receive the transaction and parse it for control message via Linux FireWire subsystem, without any support by ALSA firewire-tascam driver. Therefore the driver gives no support for it.
This commit removes placeholder for FE-8 and add some comment for its functionalities as notes.
$ python2 linux-firewire-utils/src/crpp < ~/git/am-config-rom/tascam/tascam-fe8.img ROM header and bus information block ----------------------------------------------------------------- 400 040f4798 bus_info_length 4, crc_length 15, crc 18328 (should be 14256) 404 31333934 bus_name "1394" 408 20ff7002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 00022eff company_id 00022e | 410 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
root directory ----------------------------------------------------------------- 414 0004bccc directory_length 4, crc 48332 418 0300022e vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428
unit directory at 428 ----------------------------------------------------------------- 428 0003eda4 directory_length 3, crc 60836 42c 1200022e specifier id 430 13800001 version 434 d4000004 --> dependent info directory at 444
eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002461e leaf_length 2, crc 17950 43c 00022eff company_id 00022e | 440 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
dependent info directory at 444 ----------------------------------------------------------------- 444 0002ae47 directory_length 2, crc 44615 448 81000002 --> descriptor leaf at 450 44c 82000006 --> bus dependent info leaf at 464
descriptor leaf at 450 ----------------------------------------------------------------- 450 0004a79e leaf_length 4, crc 42910 454 00000000 textual descriptor 458 00000000 minimal ASCII 45c 54415343 "TASC" 460 414d0000 "AM"
bus dependent info leaf at 464 ----------------------------------------------------------------- 464 0004a7d8 leaf_length 4, crc 42968 468 00000000 46c 00000000 470 46452d38 474 00000000
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/tascam/tascam.c | 4 +++- sound/firewire/tascam/tascam.h | 20 ++++++++++++++++++++ 2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/sound/firewire/tascam/tascam.c b/sound/firewire/tascam/tascam.c index 231052db5680..addc464503bc 100644 --- a/sound/firewire/tascam/tascam.c +++ b/sound/firewire/tascam/tascam.c @@ -39,6 +39,9 @@ static const struct snd_tscm_spec model_specs[] = { .midi_capture_ports = 2, .midi_playback_ports = 4, }, + // This kernel module doesn't support FE-8 because the most of features + // can be implemented in userspace without any specific support of this + // module. };
static int identify_model(struct snd_tscm *tscm) @@ -214,7 +217,6 @@ static const struct ieee1394_device_id snd_tscm_id_table[] = { .vendor_id = 0x00022e, .specifier_id = 0x00022e, }, - /* FE-08 requires reverse-engineering because it just has faders. */ {} }; MODULE_DEVICE_TABLE(ieee1394, snd_tscm_id_table); diff --git a/sound/firewire/tascam/tascam.h b/sound/firewire/tascam/tascam.h index 64a2e4d2bbfe..15bd335fa07f 100644 --- a/sound/firewire/tascam/tascam.h +++ b/sound/firewire/tascam/tascam.h @@ -129,6 +129,26 @@ struct snd_tscm {
#define TSCM_OFFSET_MIDI_RX_QUAD 0x4000
+// Although FE-8 supports the above registers, it has no I/O interfaces for +// audio samples and music messages. Otherwise it supports another notification +// for status and control message as well as LED brightening. The message +// consists of quadlet-aligned data up to 32 quadlets. The first byte of message +// is fixed to 0x40. The second byte is between 0x00 to 0x1f and represent each +// control: +// fader: 0x00-0x07 +// button: 0x0d, 0x0e +// knob: 0x14-0x1b +// sensing: 0x0b +// +// The rest two bytes represent state of the controls; e.g. current value for +// fader and knob, bitmasks for button and sensing. +// Just after turning on, 32 quadlets messages with 0x00-0x1f are immediately +// sent in one transaction. After, several quadlets are sent in one transaction. +// +// TSCM_OFFSET_FE8_CTL_TX_ON 0x0310 +// TSCM_OFFSET_FE8_CTL_TX_ADDR_HI 0x0314 +// TSCM_OFFSET_FE8_CTL_TX_ADDR_LO 0x0318 + enum snd_tscm_clock { SND_TSCM_CLOCK_INTERNAL = 0, SND_TSCM_CLOCK_WORD = 1,
On Fri, 06 Sep 2019 14:55:44 +0200, Takashi Sakamoto wrote:
TASCAM FE-8 is the rest of model in TASCAM FireWire series. This device has no functionality to process audio signal and MIDI messages. Instead, it transfers control messages to host system corresponding to operations for some faders, buttons and knobs on its surface.
Unlike the other devices in this series, the control messages are transmitted by asynchronous transactions. Some registers of device are used for registration of destination address for the transaction. The transaction includes quadlet-aligned data up to 32 quadlets.
Userspace applications can receive the transaction and parse it for control message via Linux FireWire subsystem, without any support by ALSA firewire-tascam driver. Therefore the driver gives no support for it.
This commit removes placeholder for FE-8 and add some comment for its functionalities as notes.
$ python2 linux-firewire-utils/src/crpp < ~/git/am-config-rom/tascam/tascam-fe8.img ROM header and bus information block ----------------------------------------------------------------- 400 040f4798 bus_info_length 4, crc_length 15, crc 18328 (should be 14256) 404 31333934 bus_name "1394" 408 20ff7002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 00022eff company_id 00022e | 410 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
root directory -----------------------------------------------------------------
414 0004bccc directory_length 4, crc 48332 418 0300022e vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428
unit directory at 428 -----------------------------------------------------------------
428 0003eda4 directory_length 3, crc 60836 42c 1200022e specifier id 430 13800001 version 434 d4000004 --> dependent info directory at 444
eui-64 leaf at 438 -----------------------------------------------------------------
438 0002461e leaf_length 2, crc 17950 43c 00022eff company_id 00022e | 440 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
dependent info directory at 444 -----------------------------------------------------------------
444 0002ae47 directory_length 2, crc 44615 448 81000002 --> descriptor leaf at 450 44c 82000006 --> bus dependent info leaf at 464
descriptor leaf at 450 -----------------------------------------------------------------
450 0004a79e leaf_length 4, crc 42910 454 00000000 textual descriptor 458 00000000 minimal ASCII 45c 54415343 "TASC" 460 414d0000 "AM"
bus dependent info leaf at 464 -----------------------------------------------------------------
464 0004a7d8 leaf_length 4, crc 42968 468 00000000 46c 00000000 470 46452d38 474 00000000
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp
Applied, thanks.
Takashi
On Fri, Sep 06, 2019 at 09:55:44PM +0900, Takashi Sakamoto wrote:
Userspace applications can receive the transaction and parse it for control message via Linux FireWire subsystem, without any support by ALSA firewire-tascam driver. Therefore the driver gives no support for it.
For your information, this is a sample Python 3 script to listen the transactions, utilizing PyGObject to load Hinawa-2.0 g-i.
``` #!/usr/bin/env python3
import gi gi.require_version('Hinawa', '2.0') from gi.repository import Hinawa
gi.require_version('GLib', '2.0') from gi.repository import GLib
from signal import SIGINT from struct import unpack, pack from time import sleep
# Allocate address space to receive notification. class Fe8Responder(Hinawa.FwResp): def __init__(self, unit): super().__init__()
# Allocate within private space. addr = 0xffffe0000000 while addr < 0xfffff0000000: try: self.register(unit, addr, 0x80) break except: addr += 0x80
self.addr = addr
def do_requested(self, tcode): frames = self.get_req_frame()
# Just print the event. Practically translate it to general MIDI # messages and send the messages to the other processes via IPC such as # ALSA Sequencer. for i in range(0, len(frames), 4): print('{:08x}'.format(unpack('>I', frames[i:i+4])[0]))
return Hinawa.FwRcode.COMPLETE
# For a case that the device is detected as '/dev/fw1'. unit = Hinawa.FwUnit() unit.open('/dev/fw1') unit.listen() resp = Fe8Responder(unit)
req = Hinawa.FwReq()
# Register the address. addr_hi = pack('>H', unit.get_property('local-node-id')) addr_hi += pack('>H', (resp.addr & 0xffff00000000) >> 32) addr_lo = pack('>I', resp.addr & 0xffffffff) req.write(unit, 0xffff00000314, addr_hi) req.write(unit, 0xffff00000318, addr_lo)
# Enable notification. req.write(unit, 0xffff00000310, pack('>I', 1))
# Turn on FireWire LED. data = [0x00, 0x01, 0x00, 0x8e] req.write(unit, 0xffff00000404, data)
# Wait for events. def handle_unix_signal(loop): loop.quit() loop = GLib.MainLoop() GLib.unix_signal_add(GLib.PRIORITY_HIGH, SIGINT, handle_unix_signal, loop) loop.run()
# Disable notification. req.write(unit, 0xffff00000310, pack('>I', 0))
# Turn off FireWire LED. data = [0x00, 0x00, 0x00, 0x8e] req.write(unit, 0xffff00000404, data)
del req del resp del unit ```
Regards
Takashi Sakamoto
participants (2)
-
Takashi Iwai
-
Takashi Sakamoto