[alsa-devel] [PATCH 0/6] ASoC: qdsp6: Add missing slimbus capture support
This patchset adds support to slimbus tx ports plus 3 trival fixes to do with closing port when its not really open. slim tx support invoving add dais and routing, rest of the dsp configuration commands are already available in mainline.
slim tx is verified with wcd9335 codec on DB820c.
Thanks, srini
Srinivas Kandagatla (6): ASoC: qdsp6: q6afe: Add missing slimbus capture ports ASoC: qdsp6: q6afe-dai: add support to slim tx dais ASoC: qdsp6: q6routing: add slim rx routings ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels ASoC: qdsp6: q6afe-dai: do not close port if its not opened ASoC: qdsp6: q6asm-dai: do not close port if its not opened
sound/soc/qcom/qdsp6/q6afe-dai.c | 179 +++++++++++++++++++++++++++++++++++---- sound/soc/qcom/qdsp6/q6afe.c | 21 +++++ sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +- sound/soc/qcom/qdsp6/q6routing.c | 28 ++++++ 4 files changed, 216 insertions(+), 16 deletions(-)
Existing code already has support for SLIMbus TX and RX, only thing that was missing from TX side was mapping between virtual to actual DSP port ids.
This patch adds those mappings.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6afe.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 621b67b34db9..90e2d8e658bf 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -514,6 +514,20 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = { SLIMBUS_5_RX, 1, 1}, [SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX, SLIMBUS_6_RX, 1, 1}, + [SLIMBUS_0_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX, + SLIMBUS_0_TX, 0, 1}, + [SLIMBUS_1_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX, + SLIMBUS_1_TX, 0, 1}, + [SLIMBUS_2_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX, + SLIMBUS_2_TX, 0, 1}, + [SLIMBUS_3_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX, + SLIMBUS_3_TX, 0, 1}, + [SLIMBUS_4_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX, + SLIMBUS_4_TX, 0, 1}, + [SLIMBUS_5_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX, + SLIMBUS_5_TX, 0, 1}, + [SLIMBUS_6_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX, + SLIMBUS_6_TX, 0, 1}, [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX, PRIMARY_MI2S_RX, 1, 1}, [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX, @@ -1372,6 +1386,13 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_MULTICHAN_HDMI_RX: cfg_type = AFE_PARAM_ID_HDMI_CONFIG; break; + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX:
The patch
ASoC: qdsp6: q6afe: Add missing slimbus capture ports
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 25090bc3f36cc3c171ec020dcc89c71db6bd0a67 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:39 +0100 Subject: [PATCH] ASoC: qdsp6: q6afe: Add missing slimbus capture ports
Existing code already has support for SLIMbus TX and RX, only thing that was missing from TX side was mapping between virtual to actual DSP port ids.
This patch adds those mappings.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6afe.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 671743453fbb..000775b4bba8 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -514,6 +514,20 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = { SLIMBUS_5_RX, 1, 1}, [SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX, SLIMBUS_6_RX, 1, 1}, + [SLIMBUS_0_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX, + SLIMBUS_0_TX, 0, 1}, + [SLIMBUS_1_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX, + SLIMBUS_1_TX, 0, 1}, + [SLIMBUS_2_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX, + SLIMBUS_2_TX, 0, 1}, + [SLIMBUS_3_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX, + SLIMBUS_3_TX, 0, 1}, + [SLIMBUS_4_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX, + SLIMBUS_4_TX, 0, 1}, + [SLIMBUS_5_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX, + SLIMBUS_5_TX, 0, 1}, + [SLIMBUS_6_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX, + SLIMBUS_6_TX, 0, 1}, [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX, PRIMARY_MI2S_RX, 1, 1}, [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX, @@ -1372,6 +1386,13 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_MULTICHAN_HDMI_RX: cfg_type = AFE_PARAM_ID_HDMI_CONFIG; break; + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX:
This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 175 +++++++++++++++++++++++++++++++++++---- 1 file changed, 161 insertions(+), 14 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 1d2e5013c121..8dd3683eb367 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -382,23 +382,31 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai, struct q6afe_port_config *pcfg = &dai_data->port_config[dai->id]; int i;
- if (!rx_slot) { - pr_err("%s: rx slot not found\n", __func__); - return -EINVAL; - } + if (dai->id & 0x1) { + /* TX */ + if (!tx_slot) { + pr_err("%s: tx slot not found\n", __func__); + return -EINVAL; + }
- for (i = 0; i < rx_num; i++) { - pcfg->slim.ch_mapping[i] = rx_slot[i]; - pr_debug("%s: find number of channels[%d] ch[%d]\n", - __func__, i, rx_slot[i]); - } + for (i = 0; i < tx_num; i++) + pcfg->slim.ch_mapping[i] = tx_slot[i]; + + pcfg->slim.num_channels = tx_num; + + + } else { + if (!rx_slot) { + pr_err("%s: rx slot not found\n", __func__); + return -EINVAL; + }
- pcfg->slim.num_channels = rx_num; + for (i = 0; i < rx_num; i++) + pcfg->slim.ch_mapping[i] = rx_slot[i];
- pr_debug("%s: SLIMBUS_%d_RX cnt[%d] ch[%d %d]\n", __func__, - (dai->id - SLIMBUS_0_RX) / 2, rx_num, - pcfg->slim.ch_mapping[0], - pcfg->slim.ch_mapping[1]); + pcfg->slim.num_channels = rx_num; + + }
return 0; } @@ -443,6 +451,14 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = { {"Slimbus5 Playback", NULL, "SLIMBUS_5_RX"}, {"Slimbus6 Playback", NULL, "SLIMBUS_6_RX"},
+ {"SLIMBUS_0_TX", NULL, "Slimbus Capture"}, + {"SLIMBUS_1_TX", NULL, "Slimbus1 Capture"}, + {"SLIMBUS_2_TX", NULL, "Slimbus2 Capture"}, + {"SLIMBUS_3_TX", NULL, "Slimbus3 Capture"}, + {"SLIMBUS_4_TX", NULL, "Slimbus4 Capture"}, + {"SLIMBUS_5_TX", NULL, "Slimbus5 Capture"}, + {"SLIMBUS_6_TX", NULL, "Slimbus6 Capture"}, + {"Primary MI2S Playback", NULL, "PRI_MI2S_RX"}, {"Secondary MI2S Playback", NULL, "SEC_MI2S_RX"}, {"Tertiary MI2S Playback", NULL, "TERT_MI2S_RX"}, @@ -636,6 +652,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .rate_min = 8000, .rate_max = 192000, }, + }, { + .name = "SLIMBUS_0_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_0_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus1 Playback", @@ -654,6 +688,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_1_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + }, { + .name = "SLIMBUS_1_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_1_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus1 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus2 Playback", @@ -672,6 +724,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_2_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_2_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_2_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus2 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus3 Playback", @@ -690,6 +761,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_3_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_3_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_3_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus3 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus4 Playback", @@ -708,6 +798,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_4_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_4_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_4_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus4 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus5 Playback", @@ -726,6 +835,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_5_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_5_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_5_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus5 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus6 Playback", @@ -744,6 +872,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_6_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_6_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_6_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus6 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Primary MI2S Playback",
The patch
ASoC: qdsp6: q6afe-dai: add support to slim tx dais
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From f03d6b1b4d2460a749fb2826aa71e15a66104a88 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:40 +0100 Subject: [PATCH] ASoC: qdsp6: q6afe-dai: add support to slim tx dais
This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 175 ++++++++++++++++++++++++++++--- 1 file changed, 161 insertions(+), 14 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 1d2e5013c121..8dd3683eb367 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -382,23 +382,31 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai, struct q6afe_port_config *pcfg = &dai_data->port_config[dai->id]; int i;
- if (!rx_slot) { - pr_err("%s: rx slot not found\n", __func__); - return -EINVAL; - } + if (dai->id & 0x1) { + /* TX */ + if (!tx_slot) { + pr_err("%s: tx slot not found\n", __func__); + return -EINVAL; + }
- for (i = 0; i < rx_num; i++) { - pcfg->slim.ch_mapping[i] = rx_slot[i]; - pr_debug("%s: find number of channels[%d] ch[%d]\n", - __func__, i, rx_slot[i]); - } + for (i = 0; i < tx_num; i++) + pcfg->slim.ch_mapping[i] = tx_slot[i]; + + pcfg->slim.num_channels = tx_num; + + + } else { + if (!rx_slot) { + pr_err("%s: rx slot not found\n", __func__); + return -EINVAL; + }
- pcfg->slim.num_channels = rx_num; + for (i = 0; i < rx_num; i++) + pcfg->slim.ch_mapping[i] = rx_slot[i];
- pr_debug("%s: SLIMBUS_%d_RX cnt[%d] ch[%d %d]\n", __func__, - (dai->id - SLIMBUS_0_RX) / 2, rx_num, - pcfg->slim.ch_mapping[0], - pcfg->slim.ch_mapping[1]); + pcfg->slim.num_channels = rx_num; + + }
return 0; } @@ -443,6 +451,14 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = { {"Slimbus5 Playback", NULL, "SLIMBUS_5_RX"}, {"Slimbus6 Playback", NULL, "SLIMBUS_6_RX"},
+ {"SLIMBUS_0_TX", NULL, "Slimbus Capture"}, + {"SLIMBUS_1_TX", NULL, "Slimbus1 Capture"}, + {"SLIMBUS_2_TX", NULL, "Slimbus2 Capture"}, + {"SLIMBUS_3_TX", NULL, "Slimbus3 Capture"}, + {"SLIMBUS_4_TX", NULL, "Slimbus4 Capture"}, + {"SLIMBUS_5_TX", NULL, "Slimbus5 Capture"}, + {"SLIMBUS_6_TX", NULL, "Slimbus6 Capture"}, + {"Primary MI2S Playback", NULL, "PRI_MI2S_RX"}, {"Secondary MI2S Playback", NULL, "SEC_MI2S_RX"}, {"Tertiary MI2S Playback", NULL, "TERT_MI2S_RX"}, @@ -636,6 +652,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .rate_min = 8000, .rate_max = 192000, }, + }, { + .name = "SLIMBUS_0_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_0_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus1 Playback", @@ -654,6 +688,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_1_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + }, { + .name = "SLIMBUS_1_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_1_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus1 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus2 Playback", @@ -672,6 +724,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_2_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_2_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_2_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus2 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus3 Playback", @@ -690,6 +761,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_3_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_3_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_3_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus3 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus4 Playback", @@ -708,6 +798,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_4_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_4_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_4_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus4 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus5 Playback", @@ -726,6 +835,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_5_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_5_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_5_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus5 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus6 Playback", @@ -744,6 +872,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_6_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_6_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_6_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus6 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Primary MI2S Playback",
This patch add routings mixer controls for slim rx ports.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6routing.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index c80fdbc2442e..35269b492761 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -68,6 +68,13 @@ { mix_name, "SEC_MI2S_TX", "SEC_MI2S_TX" }, \ { mix_name, "QUAT_MI2S_TX", "QUAT_MI2S_TX" }, \ { mix_name, "TERT_MI2S_TX", "TERT_MI2S_TX" }, \ + { mix_name, "SLIMBUS_0_TX", "SLIMBUS_0_TX" }, \ + { mix_name, "SLIMBUS_1_TX", "SLIMBUS_1_TX" }, \ + { mix_name, "SLIMBUS_2_TX", "SLIMBUS_2_TX" }, \ + { mix_name, "SLIMBUS_3_TX", "SLIMBUS_3_TX" }, \ + { mix_name, "SLIMBUS_4_TX", "SLIMBUS_4_TX" }, \ + { mix_name, "SLIMBUS_5_TX", "SLIMBUS_5_TX" }, \ + { mix_name, "SLIMBUS_6_TX", "SLIMBUS_6_TX" }, \ { mix_name, "PRIMARY_TDM_TX_0", "PRIMARY_TDM_TX_0"}, \ { mix_name, "PRIMARY_TDM_TX_1", "PRIMARY_TDM_TX_1"}, \ { mix_name, "PRIMARY_TDM_TX_2", "PRIMARY_TDM_TX_2"}, \ @@ -122,6 +129,27 @@ SOC_SINGLE_EXT("QUAT_MI2S_TX", QUATERNARY_MI2S_TX, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_0_TX", SLIMBUS_0_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_1_TX", SLIMBUS_1_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_2_TX", SLIMBUS_2_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_3_TX", SLIMBUS_3_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_4_TX", SLIMBUS_4_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_5_TX", SLIMBUS_5_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_6_TX", SLIMBUS_6_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ SOC_SINGLE_EXT("PRIMARY_TDM_TX_0", PRIMARY_TDM_TX_0, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \
The patch
ASoC: qdsp6: q6routing: add slim rx routings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 9191ffe2d212f64aa2ec311f4294ba7066d1f8a1 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:41 +0100 Subject: [PATCH] ASoC: qdsp6: q6routing: add slim rx routings
This patch add routings mixer controls for slim rx ports.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6routing.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index c80fdbc2442e..35269b492761 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -68,6 +68,13 @@ { mix_name, "SEC_MI2S_TX", "SEC_MI2S_TX" }, \ { mix_name, "QUAT_MI2S_TX", "QUAT_MI2S_TX" }, \ { mix_name, "TERT_MI2S_TX", "TERT_MI2S_TX" }, \ + { mix_name, "SLIMBUS_0_TX", "SLIMBUS_0_TX" }, \ + { mix_name, "SLIMBUS_1_TX", "SLIMBUS_1_TX" }, \ + { mix_name, "SLIMBUS_2_TX", "SLIMBUS_2_TX" }, \ + { mix_name, "SLIMBUS_3_TX", "SLIMBUS_3_TX" }, \ + { mix_name, "SLIMBUS_4_TX", "SLIMBUS_4_TX" }, \ + { mix_name, "SLIMBUS_5_TX", "SLIMBUS_5_TX" }, \ + { mix_name, "SLIMBUS_6_TX", "SLIMBUS_6_TX" }, \ { mix_name, "PRIMARY_TDM_TX_0", "PRIMARY_TDM_TX_0"}, \ { mix_name, "PRIMARY_TDM_TX_1", "PRIMARY_TDM_TX_1"}, \ { mix_name, "PRIMARY_TDM_TX_2", "PRIMARY_TDM_TX_2"}, \ @@ -122,6 +129,27 @@ SOC_SINGLE_EXT("QUAT_MI2S_TX", QUATERNARY_MI2S_TX, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_0_TX", SLIMBUS_0_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_1_TX", SLIMBUS_1_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_2_TX", SLIMBUS_2_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_3_TX", SLIMBUS_3_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_4_TX", SLIMBUS_4_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_5_TX", SLIMBUS_5_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_6_TX", SLIMBUS_6_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ SOC_SINGLE_EXT("PRIMARY_TDM_TX_0", PRIMARY_TDM_TX_0, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \
num_channels for slim dais are aready set int set_channel_map, do not overwrite them in hw_params.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 8dd3683eb367..074582afda85 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -81,7 +81,6 @@ static int q6slim_hw_params(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); struct q6afe_slim_cfg *slim = &dai_data->port_config[dai->id].slim;
- slim->num_channels = params_channels(params); slim->sample_rate = params_rate(params);
switch (params_format(params)) {
The patch
ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From f1478a1476d45c5d7b070c726f46a7b581d3103c Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:42 +0100 Subject: [PATCH] ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels
num_channels for slim dais are aready set int set_channel_map, do not overwrite them in hw_params.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 8dd3683eb367..074582afda85 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -81,7 +81,6 @@ static int q6slim_hw_params(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); struct q6afe_slim_cfg *slim = &dai_data->port_config[dai->id].slim;
- slim->num_channels = params_channels(params); slim->sample_rate = params_rate(params);
switch (params_format(params)) {
afe ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 074582afda85..e7f809e3ee1f 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -314,6 +314,9 @@ static void q6afe_dai_shutdown(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); int rc;
+ if (!dai_data->is_port_started[dai->id]) + return; + rc = q6afe_port_stop(dai_data->port[dai->id]); if (rc < 0) dev_err(dai->dev, "fail to close AFE port (%d)\n", rc);
The patch
ASoC: qdsp6: q6afe-dai: do not close port if its not opened
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 110743189c863e96dc08a581d56c50b965870a3f Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:43 +0100 Subject: [PATCH] ASoC: qdsp6: q6afe-dai: do not close port if its not opened
afe ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 5002dd05bf27..a373ca5523ff 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -315,6 +315,9 @@ static void q6afe_dai_shutdown(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); int rc;
+ if (!dai_data->is_port_started[dai->id]) + return; + rc = q6afe_port_stop(dai_data->port[dai->id]); if (rc < 0) dev_err(dai->dev, "fail to close AFE port (%d)\n", rc);
asm ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 1196dc7483d2..199d0fb6f90a 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -390,7 +390,9 @@ static int q6asm_dai_close(struct snd_pcm_substream *substream) struct q6asm_dai_rtd *prtd = runtime->private_data;
if (prtd->audio_client) { - q6asm_cmd(prtd->audio_client, CMD_CLOSE); + if (prtd->state) + q6asm_cmd(prtd->audio_client, CMD_CLOSE); + q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); q6asm_audio_client_free(prtd->audio_client);
The patch
ASoC: qdsp6: q6asm-dai: do not close port if its not opened
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 5dffc1752cabde6396fca28ff8343febfa524512 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org Date: Wed, 4 Jul 2018 10:49:44 +0100 Subject: [PATCH] ASoC: qdsp6: q6asm-dai: do not close port if its not opened
asm ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 349c6a883c63..360936703b3d 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -390,7 +390,9 @@ static int q6asm_dai_close(struct snd_pcm_substream *substream) struct q6asm_dai_rtd *prtd = runtime->private_data;
if (prtd->audio_client) { - q6asm_cmd(prtd->audio_client, CMD_CLOSE); + if (prtd->state) + q6asm_cmd(prtd->audio_client, CMD_CLOSE); + q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); q6asm_audio_client_free(prtd->audio_client);
participants (2)
-
Mark Brown -
Srinivas Kandagatla