According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge.

Reported-by: Songjun Wu songjun.wu@atmel.com Signed-off-by: Bo Shen voice.shen@atmel.com ---

Changes in v2: None

sound/soc/atmel/atmel_ssc_dai.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 99ff35e..e691aab 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -348,7 +348,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, struct atmel_pcm_dma_params *dma_params; int dir, channels, bits; u32 tfmr, rfmr, tcmr, rcmr; - int start_event; int ret; int fslen, fslen_ext;

@@ -457,19 +456,10 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, * The SSC transmit clock is obtained from the BCLK signal on * on the TK line, and the SSC receive clock is * generated from the transmit clock. - * - * For single channel data, one sample is transferred - * on the falling edge of the LRC clock. - * For two channel data, one sample is - * transferred on both edges of the LRC clock. */ - start_event = ((channels == 1) - ? SSC_START_FALLING_RF - : SSC_START_EDGE_RF); - rcmr = SSC_BF(RCMR_PERIOD, 0) | SSC_BF(RCMR_STTDLY, START_DELAY) - | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) | SSC_BF(RCMR_CKI, SSC_CKI_RISING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? @@ -478,14 +468,14 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | SSC_BF(RFMR_FSLEN, 0) - | SSC_BF(RFMR_DATNB, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) | SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_LOOP, 0) | SSC_BF(RFMR_DATLEN, (bits - 1));

tcmr = SSC_BF(TCMR_PERIOD, 0) | SSC_BF(TCMR_STTDLY, START_DELAY) - | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | SSC_BF(TCMR_CKO, SSC_CKO_NONE) | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ? @@ -495,7 +485,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, | SSC_BF(TFMR_FSDEN, 0) | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | SSC_BF(TFMR_FSLEN, 0) - | SSC_BF(TFMR_DATNB, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) | SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATDEF, 0) | SSC_BF(TFMR_DATLEN, (bits - 1));