[alsa-devel] [PATCH] ASoC: When releasing WM5100 put /RESET into reset
Reset is active low, make sure we leave it asserted when release the device.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm5100.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 9995d14..0e38a24 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2901,7 +2901,7 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, err_reset: wm5100_free_gpio(i2c); if (wm5100->pdata.reset) { - gpio_set_value_cansleep(wm5100->pdata.reset, 1); + gpio_set_value_cansleep(wm5100->pdata.reset, 0); gpio_free(wm5100->pdata.reset); } err_ldo: @@ -2934,7 +2934,7 @@ static __devexit int wm5100_i2c_remove(struct i2c_client *client) snd_soc_unregister_codec(&client->dev); wm5100_free_gpio(client); if (wm5100->pdata.reset) { - gpio_set_value_cansleep(wm5100->pdata.reset, 1); + gpio_set_value_cansleep(wm5100->pdata.reset, 0); gpio_free(wm5100->pdata.reset); } if (wm5100->pdata.ldo_ena) {
participants (1)
-
Mark Brown