slimbus uses address-cells=2, so correct children unit addresses.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 9db1fce6b198..2264bba69f84 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3841,12 +3841,12 @@ ngd@1 { #address-cells = <2>; #size-cells = <0>;

- wcd9340_ifd: ifd@0{ + wcd9340_ifd: ifd@0,0 { compatible = "slim217,250"; reg = <0 0>; };

- wcd9340: codec@1{ + wcd9340: codec@1,0 { compatible = "slim217,250"; reg = <1 0>; slim-ifc-dev = <&wcd9340_ifd>;

Correct slimbus address/size cells to match bindings.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 903c443a867f..2c5908d104f7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3320,15 +3320,15 @@ slim_msm: slim@91c0000 { #size-cells = <0>; ngd@1 { reg = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>;

- tasha_ifd: tas-ifd { + tasha_ifd: tas-ifd@0,0 { compatible = "slim217,1a0"; reg = <0 0>; };

- wcd9335: codec@1{ + wcd9335: codec@1,0 { pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; pinctrl-names = "default";

New slimbus DT schema expect only SLIMbus bus nodes to be named "slimbus". In case of Qualcomm SLIMbus NGD, the bus node is what was called "ngd".

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 1213f78a8b7a..7b62efb180d5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3823,7 +3823,7 @@ qspi: spi@88df000 { status = "disabled"; };

- slim: slim@171c0000 { + slim: slim-ngd@171c0000 { compatible = "qcom,slim-ngd-v2.1.0"; reg = <0 0x171c0000 0 0x2c000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; @@ -3835,7 +3835,7 @@ slim: slim@171c0000 { #address-cells = <1>; #size-cells = <0>;

- ngd@1 { + slim@1 { reg = <1>; #address-cells = <2>; #size-cells = <0>;

Convert the SLIMbus bus description bindings to DT Schema.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../devicetree/bindings/slimbus/bus.txt | 60 ------------ .../bindings/slimbus/slim-ngd-qcom-ctrl.txt | 2 - .../bindings/slimbus/slim-qcom-ctrl.txt | 3 - .../devicetree/bindings/slimbus/slimbus.yaml | 95 +++++++++++++++++++ 4 files changed, 95 insertions(+), 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt create mode 100644 Documentation/devicetree/bindings/slimbus/slimbus.yaml

diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt deleted file mode 100644 index bbe871f82a8b..000000000000 --- a/Documentation/devicetree/bindings/slimbus/bus.txt +++ /dev/null @@ -1,60 +0,0 @@ -SLIM(Serial Low Power Interchip Media Bus) bus - -SLIMbus is a 2-wire bus, and is used to communicate with peripheral -components like audio-codec. - -Required property for SLIMbus controller node: -- compatible - name of SLIMbus controller - -Child nodes: -Every SLIMbus controller node can contain zero or more child nodes -representing slave devices on the bus. Every SLIMbus slave device is -uniquely determined by the enumeration address containing 4 fields: -Manufacturer ID, Product code, Device index, and Instance value for -the device. -If child node is not present and it is instantiated after device -discovery (slave device reporting itself present). - -In some cases it may be necessary to describe non-probeable device -details such as non-standard ways of powering up a device. In -such cases, child nodes for those devices will be present as -slaves of the SLIMbus controller, as detailed below. - -Required property for SLIMbus child node if it is present: -- reg - Should be ('Device index', 'Instance ID') from SLIMbus - Enumeration Address. - Device Index Uniquely identifies multiple Devices within - a single Component. - Instance ID Is for the cases where multiple Devices of the - same type or Class are attached to the bus. - -- compatible -"slimMID,PID". The textual representation of Manufacturer ID, - Product Code, shall be in lower case hexadecimal with leading - zeroes suppressed - -Optional property for SLIMbus child node if it is present: -- slim-ifc-dev - Should be phandle to SLIMBus Interface device. - Required for devices which deal with streams. - -SLIMbus example for Qualcomm's slimbus manager component: - - slim@28080000 { - compatible = "qcom,apq8064-slim", "qcom,slim"; - reg = <0x28080000 0x2000>, - interrupts = <0 33 0>; - clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; - clock-names = "iface", "core"; - #address-cells = <2>; - #size-cell = <0>; - - codec_ifd: ifd@0,0{ - compatible = "slim217,60"; - reg = <0 0>; - }; - - codec: wcd9310@1,0{ - compatible = "slim217,60"; - reg = <1 0>; - slim-ifc-dev = <&codec_ifd>; - }; - }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt index e94a2ad3a710..7c3d9eb6af5d 100644 --- a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt +++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt @@ -5,8 +5,6 @@ with SLIMBus slaves directly over the bus using messaging interface and communicating with master component residing on ADSP for bandwidth and data-channel management

-Please refer to slimbus/bus.txt for details of the common SLIMBus bindings. - - compatible: Usage: required Value type: <stringlist> diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt index 922dcb8ff24a..6d955e129f90 100644 --- a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -4,9 +4,6 @@ master component.

Required properties:

- - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt - - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt - - reg : Offset and length of the register region(s) for the device - reg-names : Register region name(s) referenced in reg above Required register resource entries are: diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml new file mode 100644 index 000000000000..22513fb7c59a --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/slimbus/slimbus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SLIM (Serial Low Power Interchip Media) bus + +maintainers: + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: + SLIMbus is a 2-wire bus, and is used to communicate with peripheral + components like audio-codec. + +properties: + $nodename: + pattern: "^slim(@.*|-[0-9a-f])*$" + + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + +patternProperties: + "^.*@[0-9a-f]+,[0-9a-f]+$": + type: object + description: | + Every SLIMbus controller node can contain zero or more child nodes + representing slave devices on the bus. Every SLIMbus slave device is + uniquely determined by the enumeration address containing 4 fields:: + Manufacturer ID, Product code, Device index, and Instance value for the + device. + + If child node is not present and it is instantiated after device + discovery (slave device reporting itself present). + + In some cases it may be necessary to describe non-probeable device + details such as non-standard ways of powering up a device. In such cases, + child nodes for those devices will be present as slaves of the SLIMbus + controller. + + properties: + compatible: + pattern: "^slim[0-9a-f]+,[0-9a-f]+$" + + reg: + maxItems: 1 + description: | + Pair of (device index, instande ID), where:: + - Device index, which uniquely identifies multiple devices within a + single component. + - Instance ID, can be used for the cases where multiple devices of + the same type or class are attached to the bus. + + required: + - compatible + - reg + + additionalProperties: true + +required: + - "#address-cells" + - "#size-cells" + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/clock/qcom,lcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207c 4>; + reg-names = "ctrl", "slew"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cells = <0>; + + audio-codec@1,0 { + compatible = "slim217,60"; + reg = <1 0>; + }; + }; + };

Convert the Qualcomm SoC SLIMbus controller bindings to DT Schema.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../bindings/slimbus/qcom,slim.yaml | 86 +++++++++++++++++++ .../bindings/slimbus/slim-qcom-ctrl.txt | 36 -------- 2 files changed, 86 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/slimbus/qcom,slim.yaml delete mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt

diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml new file mode 100644 index 000000000000..883bda58ca97 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC SLIMbus controller + +maintainers: + - Krzysztof Kozlowski krzysztof.kozlowski@linaro.org + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: + SLIMbus controller used when applications processor controls SLIMbus master + component. + +allOf: + - $ref: slimbus.yaml# + +properties: + compatible: + items: + - enum: + - qcom,apq8064-slim + - const: qcom,slim + + reg: + items: + - description: Physical address of controller register blocks + - description: SLEW RATE register + + reg-names: + items: + - const: ctrl + - const: slew + + clocks: + items: + - description: Interface clock for this controller + - description: Interrupt for controller core's BAM + + clock-names: + items: + - const: iface + - const: core + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/clock/qcom,lcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207c 4>; + reg-names = "ctrl", "slew"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cells = <0>; + + audio-codec@1,0 { + compatible = "slim217,60"; + reg = <1 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt deleted file mode 100644 index 6d955e129f90..000000000000 --- a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -Qualcomm SLIMbus controller -This controller is used if applications processor driver controls SLIMbus -master component. - -Required properties: - - - reg : Offset and length of the register region(s) for the device - - reg-names : Register region name(s) referenced in reg above - Required register resource entries are: - "ctrl": Physical address of controller register blocks - "slew": required for "qcom,apq8064-slim" SOC. - - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible - followed by "qcom,slim" for fallback. - - interrupts : Interrupt number used by this controller - - clocks : Interface and core clocks used by this SLIMbus controller - - clock-names : Required clock-name entries are: - "iface" : Interface clock for this controller - "core" : Interrupt for controller core's BAM - -Example: - - slim@28080000 { - compatible = "qcom,apq8064-slim", "qcom,slim"; - reg = <0x28080000 0x2000>, <0x80207C 4>; - reg-names = "ctrl", "slew"; - interrupts = <0 33 0>; - clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; - clock-names = "iface", "core"; - #address-cells = <2>; - #size-cell = <0>; - - wcd9310: audio-codec@1,0{ - compatible = "slim217,60"; - reg = <1 0>; - }; - };

Convert the Qualcomm SoC SLIMBus Non Generic Device (NGD) controller bindings to DT Schema.

During conversion add iommus already present in DTS and extend the example based on SDM845.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../bindings/slimbus/qcom,slim-ngd.yaml | 120 ++++++++++++++++++ .../bindings/slimbus/slim-ngd-qcom-ctrl.txt | 82 ------------ 2 files changed, 120 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml delete mode 100644 Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt

diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml new file mode 100644 index 000000000000..abf61c15246e --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller + +maintainers: + - Krzysztof Kozlowski krzysztof.kozlowski@linaro.org + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: + SLIMBus NGD controller is a light-weight driver responsible for communicating + with SLIMBus slaves directly over the bus using messaging interface and + communicating with master component residing on ADSP for bandwidth and + data-channel management + +properties: + compatible: + enum: + - qcom,slim-ngd-v1.5.0 # for MSM8996 + - qcom,slim-ngd-v2.1.0 # for SDM845 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + +patternProperties: + "^slim@[0-9a-f]+$": + type: object + $ref: slimbus.yaml# + description: + Each subnode represents an instance of NGD + + properties: + reg: + maxItems: 1 + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - dmas + - dma-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + slim-ngd@171c0000 { + compatible = "qcom,slim-ngd-v2.1.0"; + reg = <0x171c0000 0x2c000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x1806 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + codec@1,0 { + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + + /* Rest of the WCD9340 codec */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt deleted file mode 100644 index 7c3d9eb6af5d..000000000000 --- a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt +++ /dev/null @@ -1,82 +0,0 @@ -Qualcomm SLIMBus Non Generic Device (NGD) Controller binding - -SLIMBus NGD controller is a light-weight driver responsible for communicating -with SLIMBus slaves directly over the bus using messaging interface and -communicating with master component residing on ADSP for bandwidth and -data-channel management - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>" - must be one of the following. - "qcom,slim-ngd-v1.5.0" for MSM8996 - "qcom,slim-ngd-v2.1.0" for SDM845 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the controller - register space. -- dmas - Usage: required - Value type: <array of phandles> - Definition: List of rx and tx dma channels - -- dma-names - Usage: required - Value type: <stringlist> - Definition: must be "rx" and "tx". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: must list controller IRQ. - -#address-cells - Usage: required - Value type: <u32> - Definition: Should be 1, reflecting the instance id of ngd. - -#size-cells - Usage: required - Value type: <u32> - Definition: Should be 0 - -= NGD Devices -Each subnode represents an instance of NGD, must contain the following -properties: - -- reg: - Usage: required - Value type: <u32> - Definition: Should be instance id of ngd. - -#address-cells - Usage: required - Refer to slimbus/bus.txt for details of the common SLIMBus bindings. - -#size-cells - Usage: required - Refer to slimbus/bus.txt for details of the common SLIMBus bindings. - -= EXAMPLE - -slim@91c0000 { - compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x91c0000 0x2c000>; - interrupts = <0 163 0>; - dmas = <&slimbam 3>, <&slimbam 4>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - ngd@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <1>; - codec@1 { - compatible = "slim217,1a0"; - reg = <1 0>; - }; - }; -};