[alsa-devel] [PATCH] ASoC: SAMSUNG: Add sound card driver for Snow board
Added machine driver to instantiate I2S based sound card on Snow board. It has MAX98095 audio codec on board.
There are some other variants for Snow board which have MAX98090 audio codec. Hence support for MAX98090 is also added to this driver.
Signed-off-by: Tushar Behera tushar.behera@linaro.org --- Documentation/devicetree/bindings/sound/snow.txt | 17 ++ sound/soc/samsung/Kconfig | 11 ++ sound/soc/samsung/Makefile | 2 + sound/soc/samsung/snow.c | 190 ++++++++++++++++++++++ 4 files changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/snow.txt create mode 100644 sound/soc/samsung/snow.c
diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt new file mode 100644 index 0000000..6f3fd02 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/snow.txt @@ -0,0 +1,17 @@ +Audio Binding for Snow boards + +Required properties: +- compatible : Can be one of the following, + "google,snow-audio-max98090" or + "google,snow-audio-max98095" +- samsung,i2s-controller: The phandle of the Samsung I2S0 controller +- samsung,audio-codec: The phandle of the audio codec + +Example: + +sound { + compatible = "google,snow-audio-max98095"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98095>; +}; diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index f2e2891..d07b04f 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -231,3 +231,13 @@ config SND_SOC_LITTLEMILL select SND_SAMSUNG_I2S select MFD_WM8994 select SND_SOC_WM8994 + +config SND_SOC_SNOW + tristate "Audio support for Google Snow boards" + depends on SND_SOC_SAMSUNG + select SND_SOC_MAX98090 + select SND_SOC_MAX98095 + select SND_SAMSUNG_I2S + help + Say Y if you want to add audio support for various Snow + boards based on Exynos5 series of SoCs. diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile index 86715d8..6d0212b 100644 --- a/sound/soc/samsung/Makefile +++ b/sound/soc/samsung/Makefile @@ -34,6 +34,7 @@ snd-soc-h1940-uda1380-objs := h1940_uda1380.o snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o snd-soc-smdk-wm8580-objs := smdk_wm8580.o snd-soc-smdk-wm8994-objs := smdk_wm8994.o +snd-soc-snow-objs := snow.o snd-soc-smdk-wm9713-objs := smdk_wm9713.o snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o snd-soc-goni-wm8994-objs := goni_wm8994.o @@ -58,6 +59,7 @@ obj-$(CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380) += snd-soc-h1940-uda1380.o obj-$(CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994) += snd-soc-smdk-wm8994.o +obj-$(CONFIG_SND_SOC_SNOW) += snd-soc-snow.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o diff --git a/sound/soc/samsung/snow.c b/sound/soc/samsung/snow.c new file mode 100644 index 0000000..e8eedd8 --- /dev/null +++ b/sound/soc/samsung/snow.c @@ -0,0 +1,190 @@ +/* + * ASoC machine driver for Snow boards + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm_params.h> + +#include "i2s.h" + +#define FIN_PLL_RATE 24000000 + +static int snow_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int bfs, ret; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_U24: + case SNDRV_PCM_FORMAT_S24: + bfs = 48; + break; + case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_S16_LE: + bfs = 32; + break; + default: + return -EINVAL; + } + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, + FIN_PLL_RATE, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK, + 0, SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, SAMSUNG_I2S_DIV_BCLK, bfs); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops snow_ops = { + .hw_params = snow_hw_params, +}; + +static int snow_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_dapm_context *dapm = &codec->dapm; + + snd_soc_dapm_sync(dapm); + + return 0; +} + +static struct snd_soc_dai_link snow_dai[] = { + { /* Playback DAI i/f */ + .name = "Playback", + .stream_name = "Playback", + .codec_dai_name = "HiFi", + .init = snow_init, + .ops = &snow_ops, + }, { /* Capture DAI i/f */ + .name = "Capture", + .stream_name = "Capture", + .codec_dai_name = "HiFi", + .ops = &snow_ops, + }, +}; + +static struct snd_soc_card snow_snd = { + .name = "Snow-I2S", + .dai_link = snow_dai, + .num_links = ARRAY_SIZE(snow_dai), +}; + +static int snow_driver_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &snow_snd; + struct device_node *i2s_node, *codec_node; + const char *name; + int i, ret; + + if (!pdev->dev.platform_data && !pdev->dev.of_node) { + dev_err(&pdev->dev, "No platform data supplied\n"); + return -EINVAL; + } + + name = of_get_property(pdev->dev.of_node, "card-name", NULL); + if (name) + card->name = name; + + i2s_node = of_parse_phandle(pdev->dev.of_node, + "samsung,i2s-controller", 0); + if (!i2s_node) { + dev_err(&pdev->dev, + "Property 'i2s-controller' missing or invalid\n"); + return -EINVAL; + } + + codec_node = of_parse_phandle(pdev->dev.of_node, + "samsung,audio-codec", 0); + if (!codec_node) { + dev_err(&pdev->dev, + "Property 'audio-codec' missing or invalid\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(snow_dai); i++) { + snow_dai[i].codec_of_node = codec_node; + snow_dai[i].cpu_of_node = i2s_node; + snow_dai[i].platform_of_node = i2s_node; + } + + card->dev = &pdev->dev; + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + return ret; + } + + return ret; +} + +static int snow_driver_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + + return 0; +} + +static const struct of_device_id snow_of_match[] = { + { .compatible = "google,snow-audio-max98090", }, + { .compatible = "google,snow-audio-max98095", }, + {}, +}; + +static struct platform_driver snow_driver = { + .driver = { + .name = "snow-audio", + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + .of_match_table = snow_of_match, + }, + .probe = snow_driver_probe, + .remove = snow_driver_remove, +}; + +module_platform_driver(snow_driver); + +MODULE_DESCRIPTION("ALSA SoC Audio machine driver for Snow"); +MODULE_LICENSE("GPL");
On Tue, Apr 22, 2014 at 01:33:54PM +0530, Tushar Behera wrote:
Added machine driver to instantiate I2S based sound card on Snow board. It has MAX98095 audio codec on board.
In general this isn't up to modern standards, please do try to check that new code is following best practices. Did the support for setting the clocking up in the device tree get merged already?
Please do also pay attention to the CC lists when posting patches, this seems to have been sent to a fairly random selection of people and lists.
- switch (params_format(params)) {
params_width().
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
Set this in the dai_link.
- ret = snd_soc_dai_set_sysclk(codec_dai, 0,
FIN_PLL_RATE, SND_SOC_CLOCK_IN);
- if (ret < 0)
return ret;
- ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
0, SND_SOC_CLOCK_OUT);
- if (ret < 0)
return ret;
- ret = snd_soc_dai_set_clkdiv(cpu_dai, SAMSUNG_I2S_DIV_BCLK, bfs);
- if (ret < 0)
return ret;
Set this stuff up on probe. I'm surprised that you need to set BCLK at all...
+static int snow_init(struct snd_soc_pcm_runtime *rtd) +{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
- snd_soc_dapm_sync(dapm);
- return 0;
+}
This does nothing, remove it.
- if (!pdev->dev.platform_data && !pdev->dev.of_node) {
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
- }
- name = of_get_property(pdev->dev.of_node, "card-name", NULL);
- if (name)
card->name = name;
- i2s_node = of_parse_phandle(pdev->dev.of_node,
"samsung,i2s-controller", 0);
- if (!i2s_node) {
dev_err(&pdev->dev,
"Property 'i2s-controller' missing or invalid\n");
return -EINVAL;
- }
You're allowing platform data above but I see DT is mandatory here.
- ret = snd_soc_register_card(card);
- if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
return ret;
- }
devm_snd_soc_register_card().
On 22 April 2014 16:14, Mark Brown broonie@kernel.org wrote:
On Tue, Apr 22, 2014 at 01:33:54PM +0530, Tushar Behera wrote:
Added machine driver to instantiate I2S based sound card on Snow board. It has MAX98095 audio codec on board.
In general this isn't up to modern standards, please do try to check that new code is following best practices. Did the support for setting the clocking up in the device tree get merged already?
I didn't get this point. Would you please elaborate?
Please do also pay attention to the CC lists when posting patches, this seems to have been sent to a fairly random selection of people and lists.
Okay, I will update the CC list as per get_maintainer script during next revision.
switch (params_format(params)) {
params_width().
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
Set this in the dai_link.
Ok.
However, setting this in dai_link is not working if I2S is running is master mode. The bug is with I2S driver as it is setting rclk_srcrate as 0 during startup. I will fix that in another patch.
ret = snd_soc_dai_set_sysclk(codec_dai, 0,
FIN_PLL_RATE, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
0, SND_SOC_CLOCK_OUT);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_clkdiv(cpu_dai, SAMSUNG_I2S_DIV_BCLK, bfs);
if (ret < 0)
return ret;
Set this stuff up on probe. I'm surprised that you need to set BCLK at all...
Should I create a late_probe call for this (in line with tobermory.c)?
Setting BCLK was an oversight, that is not required. I will remove that.
+static int snow_init(struct snd_soc_pcm_runtime *rtd) +{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_dapm_sync(dapm);
return 0;
+}
This does nothing, remove it.
Sure.
if (!pdev->dev.platform_data && !pdev->dev.of_node) {
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
}
name = of_get_property(pdev->dev.of_node, "card-name", NULL);
if (name)
card->name = name;
i2s_node = of_parse_phandle(pdev->dev.of_node,
"samsung,i2s-controller", 0);
if (!i2s_node) {
dev_err(&pdev->dev,
"Property 'i2s-controller' missing or invalid\n");
return -EINVAL;
}
You're allowing platform data above but I see DT is mandatory here.
I will keep this as DT only, will remove the above check for platform data.
ret = snd_soc_register_card(card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
return ret;
}
devm_snd_soc_register_card().
Ok.
Thanks for reviewing.
On Tue, Apr 22, 2014 at 07:17:54PM +0530, Tushar Behera wrote:
On 22 April 2014 16:14, Mark Brown broonie@kernel.org wrote:
In general this isn't up to modern standards, please do try to check that new code is following best practices. Did the support for setting the clocking up in the device tree get merged already?
I didn't get this point. Would you please elaborate?
The out of tree driver for these boards has a bunch of code in it which reprograms the clock tree that parents the I2S block so that the I2S block has inputs at suitable rates to allow it to generate useful outputs.
Please do also pay attention to the CC lists when posting patches, this seems to have been sent to a fairly random selection of people and lists.
Okay, I will update the CC list as per get_maintainer script during next revision.
Please think about the results when doing that - get_maintainers is very useful but it does generate false positives and miss people.
ret = snd_soc_dai_set_clkdiv(cpu_dai, SAMSUNG_I2S_DIV_BCLK, bfs);
if (ret < 0)
return ret;
Set this stuff up on probe. I'm surprised that you need to set BCLK at all...
Should I create a late_probe call for this (in line with tobermory.c)?
Yes.
On 23 April 2014 00:03, Mark Brown broonie@kernel.org wrote:
On Tue, Apr 22, 2014 at 07:17:54PM +0530, Tushar Behera wrote:
On 22 April 2014 16:14, Mark Brown broonie@kernel.org wrote:
In general this isn't up to modern standards, please do try to check that new code is following best practices. Did the support for setting the clocking up in the device tree get merged already?
I didn't get this point. Would you please elaborate?
The out of tree driver for these boards has a bunch of code in it which reprograms the clock tree that parents the I2S block so that the I2S block has inputs at suitable rates to allow it to generate useful outputs.
Currently the clocks are configured through clk-exynos-audss.c. The reparenting of I2S bus clock is not done anymore, but is left to use the default value set in bootloader. With default setup (XXTI as the parent), I have tested wave files with various sample rates on Snow.
The missing part right now is setting XCLKOUT (mclk for the audio codec) properly. In internal tree, I have directly programmed the XCLKOUT register (we don't have a clock for it as this register is not part of clock domain). I am now working on preparing a clock provider for XCLKOUT.
Please do also pay attention to the CC lists when posting patches, this seems to have been sent to a fairly random selection of people and lists.
Okay, I will update the CC list as per get_maintainer script during next revision.
Please think about the results when doing that - get_maintainers is very useful but it does generate false positives and miss people.
I will do my best to add relevant people in the discussion.
ret = snd_soc_dai_set_clkdiv(cpu_dai, SAMSUNG_I2S_DIV_BCLK, bfs);
if (ret < 0)
return ret;
Set this stuff up on probe. I'm surprised that you need to set BCLK at all...
Should I create a late_probe call for this (in line with tobermory.c)?
Yes.
Ok.
Thanks.
participants (2)
-
Mark Brown
-
Tushar Behera