alsa-project/alsa-ucm-conf issue #444 was edited from FrostyCoolSlug:

The next GoXLR firmware release is going to add two new output channels for the full sized device, labeled a 'Stream Mix 2'. Outside of general usage, there's no way to determine whether these channels exist or not outside of the UCM2 definitions as the device is booting up.

Is there currently the facility to configure the devices virtual channels based on the number of channels reported by the hardware (so if there are 23 hardware channels, use the current configuration, if there are 25 hardware channels use an adjusted configuration), and if not, could you suggest the best way to handle this implementation?

Regards, Craig McLure

Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/444 Repository URL: https://github.com/alsa-project/alsa-ucm-conf