Re: [alsa-devel] alsa 1.0.16 on kernel 2.6.23.9
At Thu, 17 Apr 2008 12:42:16 +0000, Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:06:12 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 11:14:36 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 07:26:25 +0000,
Vitaly V. Ch wrote: > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > after success configure and make with one warning: > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > exported twice. Previous export was in vmlinux
Do you have CONFIG_AC97_BUS=y? This should be a module, too.
Yes, I have it. I can't find in menuconfig item to switch it. Can I switch it manually by editing .config?
Yes. But usually it's selected by other items. So you likely made dependent components all built-in (=y). They should be also modules.
where I can see which components require to be modules also?
Read Kconfig files.
I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
I don't compile OSS at all and all alsa is modules. which component can be depend on it?
Don't know unless you expose your config. Just try to select m and rebuild.
.config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
Takashi
On Thu, Apr 17, 2008 at 12:44 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:42:16 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:06:12 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 11:14:36 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote: > At Thu, 17 Apr 2008 07:26:25 +0000, > > Vitaly V. Ch wrote: > > > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > > > after success configure and make with one warning: > > > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > > exported twice. Previous export was in vmlinux > > Do you have CONFIG_AC97_BUS=y? This should be a module, too. Yes, I have it. I can't find in menuconfig item to switch it. Can I switch it manually by editing .config?
Yes. But usually it's selected by other items. So you likely made dependent components all built-in (=y). They should be also modules.
where I can see which components require to be modules also?
Read Kconfig files.
I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
which in this case I must do for compile alsa 1.0.16 for 2.6.23.17 kernel?
I don't compile OSS at all and all alsa is modules. which component can be depend on it?
Don't know unless you expose your config. Just try to select m and rebuild.
.config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
I turn off sound support at all and CONFIG_AC97_BUS=y is forced again.
i'm confused
\wbr Vitaly
Takashi
At Thu, 17 Apr 2008 12:48:04 +0000, Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:44 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:42:16 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:06:12 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 11:14:36 +0000,
Vitaly V. Ch wrote: > > On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote: > > At Thu, 17 Apr 2008 07:26:25 +0000, > > > > Vitaly V. Ch wrote: > > > > > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > > > > > after success configure and make with one warning: > > > > > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > > > exported twice. Previous export was in vmlinux > > > > Do you have CONFIG_AC97_BUS=y? This should be a module, too. > Yes, I have it. I can't find in menuconfig item to switch it. Can I > switch it manually by editing .config?
Yes. But usually it's selected by other items. So you likely made dependent components all built-in (=y). They should be also modules.
where I can see which components require to be modules also?
Read Kconfig files.
I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
which in this case I must do for compile alsa 1.0.16 for 2.6.23.17 kernel?
I don't compile OSS at all and all alsa is modules. which component can be depend on it?
Don't know unless you expose your config. Just try to select m and rebuild.
.config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
I turn off sound support at all and CONFIG_AC97_BUS=y is forced again.
Check below: % cd LINUX % find . -name 'Kconfig*' | xargs grep -l AC97_BUS
Takashi
# find . -name 'Kconfig*' | xargs grep -l AC97_BUS ./sound/Kconfig ./sound/soc/sh/Kconfig ./sound/soc/pxa/Kconfig ./sound/soc/Kconfig ./sound/soc/s3c24xx/Kconfig ./sound/drivers/Kconfig ./drivers/input/touchscreen/Kconfig #
On Thu, Apr 17, 2008 at 12:51 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:48:04 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:44 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:42:16 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:06:12 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote: > At Thu, 17 Apr 2008 11:14:36 +0000, > > Vitaly V. Ch wrote: > > > > On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote: > > > At Thu, 17 Apr 2008 07:26:25 +0000, > > > > > > Vitaly V. Ch wrote: > > > > > > > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > > > > > > > after success configure and make with one warning: > > > > > > > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > > > > exported twice. Previous export was in vmlinux > > > > > > Do you have CONFIG_AC97_BUS=y? This should be a module, too. > > Yes, I have it. I can't find in menuconfig item to switch it. Can I > > switch it manually by editing .config? > > Yes. But usually it's selected by other items. So you likely made > dependent components all built-in (=y). They should be also modules. where I can see which components require to be modules also?
Read Kconfig files.
I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
which in this case I must do for compile alsa 1.0.16 for 2.6.23.17 kernel?
I don't compile OSS at all and all alsa is modules. which component can be depend on it?
Don't know unless you expose your config. Just try to select m and rebuild.
.config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
I turn off sound support at all and CONFIG_AC97_BUS=y is forced again.
Check below: % cd LINUX % find . -name 'Kconfig*' | xargs grep -l AC97_BUS
Takashi
At Thu, 17 Apr 2008 12:54:23 +0000, Vitaly V. Ch wrote:
# find . -name 'Kconfig*' | xargs grep -l AC97_BUS ./sound/Kconfig ./sound/soc/sh/Kconfig ./sound/soc/pxa/Kconfig ./sound/soc/Kconfig ./sound/soc/s3c24xx/Kconfig ./sound/drivers/Kconfig ./drivers/input/touchscreen/Kconfig
And you checked these Kconfig files and compared with your .config?
Hint: see the last line.
Takashi
#
On Thu, Apr 17, 2008 at 12:51 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:48:04 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:44 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:42:16 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:06:12 +0000,
Vitaly V. Ch wrote: > > On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote: > > At Thu, 17 Apr 2008 11:14:36 +0000, > > > > Vitaly V. Ch wrote: > > > > > > On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote: > > > > At Thu, 17 Apr 2008 07:26:25 +0000, > > > > > > > > Vitaly V. Ch wrote: > > > > > > > > > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > > > > > > > > > after success configure and make with one warning: > > > > > > > > > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > > > > > exported twice. Previous export was in vmlinux > > > > > > > > Do you have CONFIG_AC97_BUS=y? This should be a module, too. > > > Yes, I have it. I can't find in menuconfig item to switch it. Can I > > > switch it manually by editing .config? > > > > Yes. But usually it's selected by other items. So you likely made > > dependent components all built-in (=y). They should be also modules. > where I can see which components require to be modules also?
Read Kconfig files.
I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
which in this case I must do for compile alsa 1.0.16 for 2.6.23.17 kernel?
> I don't compile OSS at all and all alsa is modules. which component > can be depend on it?
Don't know unless you expose your config. Just try to select m and rebuild.
.config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
I turn off sound support at all and CONFIG_AC97_BUS=y is forced again.
Check below: % cd LINUX % find . -name 'Kconfig*' | xargs grep -l AC97_BUS
Takashi
Thanks I understand situation
\wbr Vitaly Chernookiy
On Thu, Apr 17, 2008 at 12:57 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:54:23 +0000,
Vitaly V. Ch wrote:
# find . -name 'Kconfig*' | xargs grep -l AC97_BUS ./sound/Kconfig ./sound/soc/sh/Kconfig ./sound/soc/pxa/Kconfig ./sound/soc/Kconfig ./sound/soc/s3c24xx/Kconfig ./sound/drivers/Kconfig ./drivers/input/touchscreen/Kconfig
And you checked these Kconfig files and compared with your .config?
Hint: see the last line.
Takashi
#
On Thu, Apr 17, 2008 at 12:51 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:48:04 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:44 PM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 17 Apr 2008 12:42:16 +0000,
Vitaly V. Ch wrote:
On Thu, Apr 17, 2008 at 12:13 PM, Takashi Iwai tiwai@suse.de wrote: > At Thu, 17 Apr 2008 12:06:12 +0000, > > Vitaly V. Ch wrote: > > > > On Thu, Apr 17, 2008 at 11:54 AM, Takashi Iwai tiwai@suse.de wrote: > > > At Thu, 17 Apr 2008 11:14:36 +0000, > > > > > > Vitaly V. Ch wrote: > > > > > > > > On Thu, Apr 17, 2008 at 9:55 AM, Takashi Iwai tiwai@suse.de wrote: > > > > > At Thu, 17 Apr 2008 07:26:25 +0000, > > > > > > > > > > Vitaly V. Ch wrote: > > > > > > > > > > > > Have anyone successfully run alsa 1.0.16 on kernel 2.6.23.9? > > > > > > > > > > > > after success configure and make with one warning: > > > > > > > > > > > > WARNING: /tmp/alsa-driver-1.0.16/misc/ac97_bus: 'ac97_bus_type' > > > > > > exported twice. Previous export was in vmlinux > > > > > > > > > > Do you have CONFIG_AC97_BUS=y? This should be a module, too. > > > > Yes, I have it. I can't find in menuconfig item to switch it. Can I > > > > switch it manually by editing .config? > > > > > > Yes. But usually it's selected by other items. So you likely made > > > dependent components all built-in (=y). They should be also modules. > > where I can see which components require to be modules also? > > Read Kconfig files. I grep all Kconfig files and found out nothing depended on CONFIG_AC97_BUS
Others do "select" CONFIG_AC97_BUS.
which in this case I must do for compile alsa 1.0.16 for 2.6.23.17 kernel?
> > I don't compile OSS at all and all alsa is modules. which component > > can be depend on it? > > Don't know unless you expose your config. Just try to select m and > rebuild. .config is attached. I try to select m and make - make revert m to y before begin compile.
may be I must turn off support of sound in kernel at all?
No, it won't work, at least the sound core must be enabled.
I turn off sound support at all and CONFIG_AC97_BUS=y is forced again.
Check below: % cd LINUX % find . -name 'Kconfig*' | xargs grep -l AC97_BUS
Takashi
participants (2)
-
Takashi Iwai -
Vitaly V. Ch