Re: [alsa-devel] [PATCH 18/19] ASoC: Intel: Atom: add support for RT5642
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit
Tested on Asus T100TAF.
I'm trying to get sound working on my T100TAF i did apply all the 19 patches on top of broonie/sound and added UCM files to my system. Does the TAF need different UCM file than the T100TA?
aplay -l **** List of PLAYBACK Hardware Devices **** card 0: bytcrrt5640 [bytcr-rt5640], device 0: Baytrail Audio (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: bytcrrt5640 [bytcr-rt5640], device 1: Deep-Buffer Audio (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0
dmesg:
[ 5.209239] Adding 1049596k swap on /dev/mmcblk0p4. Priority:-1 extents:1 across:1049596k SSFS [ 5.219099] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 5.273802] i2c i2c-10: Added multiplexed i2c bus 13 [ 5.274629] intel_sst_acpi 80860F28:00: LPE base: 0x50a00000 size:0x200000 [ 5.274638] intel_sst_acpi 80860F28:00: IRAM base: 0x50ac0000 [ 5.274671] intel_sst_acpi 80860F28:00: DRAM base: 0x50b00000 [ 5.274685] intel_sst_acpi 80860F28:00: SHIM base: 0x50b40000 [ 5.274700] intel_sst_acpi 80860F28:00: Mailbox base: 0x50b44000 [ 5.274712] intel_sst_acpi 80860F28:00: DDR base: 0x20000000 [ 5.274842] intel_sst_acpi 80860F28:00: Got drv data max stream 25 [ 5.290156] Error: Driver 'pcspkr' is already registered, aborting... [ 5.311924] random: nonblocking pool is initialized [ 5.397912] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: data=ordered [ 5.506882] genirq: Flags mismatch irq 8. 00000083 (volume_down) vs. 00000000 (rtc0) [ 5.507025] gpio-keys gpio-keys.0.auto: Unable to claim irq 8; error -16 [ 5.507283] gpio-keys: probe of gpio-keys.0.auto failed with error -16 [ 5.507518] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input8 [ 5.519513] iTCO_vendor_support: vendor-support=0 [ 5.591021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.591153] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 5.604447] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.613586] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok [ 5.613794] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok [ 5.613922] compress asoc: snd-soc-dummy-dai <-> compress-cpu-dai mapping ok [ 5.615555] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port mapping ok [ 5.642183] asus_wmi: ASUS WMI generic driver loaded [ 5.663786] usbcore: registered new interface driver usbmouse [ 5.665362] usbcore: registered new interface driver usbkbd [ 5.681990] asus_wmi: Initialization: 0x1 [ 5.682121] asus_wmi: BIOS WMI version: 7.9 [ 5.682219] asus_wmi: SFUN value: 0x37 [ 5.685337] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9 [ 5.708007] asus_wmi: Number of fans: 1 [ 5.801413] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 5.801529] input: SIS0817:00 0457:1071 as /devices/platform/80860F41:03/i2c-11/i2c-SIS0817:00/0018:0457:1071.0004/input/input10 [ 5.802167] hid-multitouch 0018:0457:1071.0004: input,hidraw3: I2C HID v1.00 Device [SIS0817:00 0457:1071] on i2c-SIS0817:00 [ 5.816775] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 5.816996] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 5.817204] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 5.817405] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 5.817616] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 5.818884] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 5.819109] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!! [ 5.911351] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 5.911578] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 5.911787] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 5.911997] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 5.912201] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 5.912417] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 5.912634] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 5.915142] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!! [ 6.042680] intel_rapl: Found RAPL domain package [ 6.042692] intel_rapl: Found RAPL domain core [ 6.247467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.247489] Bluetooth: BNEP filters: protocol multicast [ 6.247515] Bluetooth: BNEP socket layer initialized [ 7.524852] brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43340 rev 2 pmurev 20 [ 7.525341] usbcore: registered new interface driver brcmfmac [ 7.722004] brcmf_c_preinit_dcmds: Firmware version = wl0: Jun 17 2014 11:48:43 version 6.10.190.49 (r485840) FWID 01-8744bcd2 [ 7.739335] brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 7.899345] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.921532] audit: type=1006 audit(1450805770.516:2): pid=1018 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=1 res=1 [ 7.984230] audit: type=1006 audit(1450805770.580:3): pid=1091 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=2 res=1 [ 7.996410] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.151283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.038571] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.245916] Bluetooth: hci1: BCM: chip id 82 [ 11.245928] Bluetooth: hci1: BCM43341B0 (002.001.014) build 0000 [ 11.755123] Bluetooth: hci1: BCM (002.001.014) build 0164 [ 14.513027] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x0 fw_state 0x1 [ 14.513045] intel_sst_acpi 80860F28:00: fw download failed -16 [ 14.513067] intel_sst_acpi 80860F28:00: FW download fail -16 [ 14.513864] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.514676] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.515574] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.518058] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.518941] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.520293] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.525383] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.527248] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.528335] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 14.534111] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit
Tested on Asus T100TAF.
I'm trying to get sound working on my T100TAF i did apply all the 19 patches on top of broonie/sound and added UCM files to my system. Does the TAF need different UCM file than the T100TA?
The probe was tested but I am still fighting to get audio out. There are additional patches needed to work-around a BIOS changes that fixes the download issue shown in your log and also a change in the I2S routing, but we can't figure out if there are any additional changes needed. I suspect something is wrong with the i2S pin configuration (gpio setup) Those patches and updated firmware have not been submitted so far, i'd like to do so when it's actually working. This is on our to-do list, along with MCLK support and jack detection. There are so many variations of hardware that we are progressing slowly unfortunately.
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit
Tested on Asus T100TAF.
I'm trying to get sound working on my T100TAF i did apply all the 19 patches on top of broonie/sound and added UCM files to my system. Does the TAF need different UCM file than the T100TA?
The probe was tested but I am still fighting to get audio out. There are additional patches needed to work-around a BIOS changes that fixes the download issue shown in your log and also a change in the I2S routing, but we can't figure out if there are any additional changes needed. I suspect something is wrong with the i2S pin configuration (gpio setup) Those patches and updated firmware have not been submitted so far, i'd like to do so when it's actually working. This is on our to-do list, along with MCLK support and jack detection. There are so many variations of hardware that we are progressing slowly unfortunately.
Ok, thanks for the clarification, been fighting audio on it for a year too. i'll keep checking the list for followups
Hello
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit
Tested on Asus T100TAF.
I'm trying to get sound working on my T100TAF i did apply all the 19 patches on top of broonie/sound and added UCM files to my system. Does the TAF need different UCM file than the T100TA?
The probe was tested but I am still fighting to get audio out. There are additional patches needed to work-around a BIOS changes that fixes the download issue shown in your log and also a change in the I2S routing, but we can't figure out if there are any additional changes needed. I suspect something is wrong with the i2S pin configuration (gpio setup) Those patches and updated firmware have not been submitted so far, i'd like to do so when it's actually working. This is on our to-do list, along with MCLK support and jack detection. There are so many variations of hardware that we are progressing slowly unfortunately.
Are there any updates on the TAF sound? I have been following your github, and saw there is a new TAF branch. Is it already possible to get sound out of our devices?
Thanks
Luka
Are there any updates on the TAF sound? I have been following your github, and saw there is a new TAF branch. Is it already possible to get sound out of our devices?
Nope, it's a debug branch. The DACs get powered when audio starts playing but there is no sound. It's by far the most puzzling problem we've seen, we haven't been able to pin-point where the issue is (I2S not working, controls, etc). we did get access to the schematics which did show some changes on speakers and mics (more quirks, yay) but it's not enough.
participants (2)
-
Luka Karinja -
Pierre-Louis Bossart