The wlf,wm8962 Device Tree bindings do not specify a clock-names property. Drop it.

Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be --- See also commit 190621e0f6094001 ("arm64: dts: imx8mm-beacon: Drop unused clock-names reference"). --- arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi | 1 - 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 376ca8ff721331b8..0f40b43ac091c0f9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -126,7 +126,6 @@ wm8962: audio-codec@1a { compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; - clock-names = "xclk"; DCVDD-supply = <&reg_audio>; DBVDD-supply = <&reg_audio>; AVDD-supply = <&reg_audio>;

Convert the Wolfson WM8962 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.

Add missing *-supply and port properties. Update the example.

Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be --- .../devicetree/bindings/sound/wlf,wm8962.yaml | 118 ++++++++++++++++++ .../devicetree/bindings/sound/wm8962.txt | 43 ------- 2 files changed, 118 insertions(+), 43 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8962.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8962.txt

diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml new file mode 100644 index 0000000000000000..0e6249d7c1330f7e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8962.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8962 Ultra-Low Power Stereo CODEC + +maintainers: + - patches@opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8962 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + AVDD-supply: + description: Analogue supply. + + CPVDD-supply: + description: Charge pump power supply. + + DBVDD-supply: + description: Digital Buffer Supply. + + DCVDD-supply: + description: Digital Core Supply. + + MICVDD-supply: + description: Microphone bias amp supply. + + PLLVDD-supply: + description: PLL Supply + + SPKVDD1-supply: + description: Supply for left speaker drivers. + + SPKVDD2-supply: + description: Supply for right speaker drivers. + + spk-mono: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, the SPK_MONO bit of R51 (Class D Control 2) gets set, + indicating that the speaker is in mono mode. + + mic-cfg: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default register value for R48 (Additional Control 4). + If absent, the default should be the register default. + + gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + description: + A list of GPIO configuration register values. If absent, no + configuration of these registers is performed. Note that only values + within [0x0, 0xffff] are valid. Any other value is regarded as setting + the GPIO register to its reset value 0x0. + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - AVDD-supply + - CPVDD-supply + - DBVDD-supply + - DCVDD-supply + - MICVDD-supply + - PLLVDD-supply + - SPKVDD1-supply + - SPKVDD2-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + wm8962: codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <&reg_audio>; + DBVDD-supply = <&reg_audio>; + AVDD-supply = <&reg_audio>; + CPVDD-supply = <&reg_audio>; + MICVDD-supply = <&reg_audio>; + PLLVDD-supply = <&reg_audio>; + SPKVDD1-supply = <&reg_audio>; + SPKVDD2-supply = <&reg_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt deleted file mode 100644 index c36c649ddfd04f37..0000000000000000 --- a/Documentation/devicetree/bindings/sound/wm8962.txt +++ /dev/null @@ -1,43 +0,0 @@ -WM8962 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8962" - - - reg : the I2C address of the device. - -Optional properties: - - - clocks : The clock source of the mclk - - - spk-mono: This is a boolean property. If present, the SPK_MONO bit - of R51 (Class D Control 2) gets set, indicating that the speaker is - in mono mode. - - - mic-cfg : Default register value for R48 (Additional Control 4). - If absent, the default should be the register default. - - - gpio-cfg : A list of GPIO configuration register values. The list must - be 6 entries long. If absent, no configuration of these registers is - performed. And note that only the value within [0x0, 0xffff] is valid. - Any other value is regarded as setting the GPIO register by its reset - value 0x0. - -Example: - -wm8962: codec@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6QDL_CLK_CKO>; - - gpio-cfg = < - 0x0000 /* 0:Default */ - 0x0000 /* 1:Default */ - 0x0013 /* 2:FN_DMICCLK */ - 0x0000 /* 3:Default */ - 0x8014 /* 4:FN_DMICCDAT */ - 0x0000 /* 5:Default */ - >; -};