The VAG_POWER must be enabled after all other bits in CHIP_ANA_POWER and disabled before any other bit in CHIP_ANA_POWER. See the SGTL5000 datasheet (Table 31, BIT 7, page 42-43). Failing to follow this order will result in ugly loud "POP" noise at the end of playback.

To achieve such order, use the _PRE and _POST DAPM widgets to trigger the power_vag_event, where the event type check has to be fixed accordingly as well.

Signed-off-by: Marek Vasut marex@denx.de Cc: Dong Aisheng dong.aisheng@linaro.org Cc: Eric Nelson eric.nelson@boundarydevices.com Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/sgtl5000.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)

V2: Remove that mdelay/msleep regression

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 92bbfec..1994f01 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -151,12 +151,12 @@ static int power_vag_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { switch (event) { - case SND_SOC_DAPM_PRE_PMU: + case SND_SOC_DAPM_POST_PMU: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); break;

- case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_PRE_PMD: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, 0); msleep(400); @@ -217,12 +217,11 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { 0, SGTL5000_CHIP_DIG_POWER, 1, 0),

- SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0, - power_vag_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0), SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0), + + SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), + SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), };

/* routes for sgtl5000 */ @@ -230,16 +229,13 @@ static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */

- {"ADC", NULL, "VAG_POWER"}, {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */

- {"DAC", NULL, "VAG_POWER"}, {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ {"LO", NULL, "DAC"}, /* dac --> line_out */

- {"LINE_IN", NULL, "VAG_POWER"}, {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */