[alsa-devel] [PATCH 1/2] ASoC: cs42l56: Fix stereo channel register assignment for Headphone and LineOut volume mixers
Stereo Headphone and LineOut volume mixers are now attached to HPA+HPB, LOA+LOB.
Reported-by: Ryan Harvey ryan.harvey@cirrus.com Signed-off-by: Ryan Harvey ryan.harvey@cirrus.com Signed-off-by: Brian Austin brian.austin@cirrus.com --- sound/soc/codecs/cs42l56.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c index e5ef223..48162ee 100644 --- a/sound/soc/codecs/cs42l56.c +++ b/sound/soc/codecs/cs42l56.c @@ -453,9 +453,9 @@ static const struct snd_kcontrol_new cs42l56_snd_controls[] = { SOC_DOUBLE("ADC Boost Switch", CS42L56_GAIN_BIAS_CTL, 3, 2, 1, 1),
SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L56_HPA_VOLUME, - CS42L56_HPA_VOLUME, 0, 0x44, 0x55, hl_tlv), + CS42L56_HPB_VOLUME, 0, 0x44, 0x55, hl_tlv), SOC_DOUBLE_R_SX_TLV("LineOut Volume", CS42L56_LOA_VOLUME, - CS42L56_LOA_VOLUME, 0, 0x44, 0x55, hl_tlv), + CS42L56_LOB_VOLUME, 0, 0x44, 0x55, hl_tlv),
SOC_SINGLE_TLV("Bass Shelving Volume", CS42L56_TONE_CTL, 0, 0x00, 1, tone_tlv),
Remove unnecessary bit shifts. Correct min value to match datasheet. Num steps = number of steps between min and max.
Reported-by: Ryan Harvey ryan.harvey@cirrus.com Signed-off-by: Ryan Harvey ryan.harvey@cirrus.com Signed-off-by: Brian Austin brian.austin@cirrus.com --- sound/soc/codecs/cs42l52.c | 14 +++++++------- sound/soc/codecs/cs42l56.c | 12 ++++++------ sound/soc/codecs/cs42l73.c | 2 +- 3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 071fc77..969167d 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -399,15 +399,15 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { CS42L52_MASTERB_VOL, 0, 0x34, 0xE4, hl_tlv),
SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L52_HPA_VOL, - CS42L52_HPB_VOL, 0, 0x34, 0xCC, hpd_tlv), + CS42L52_HPB_VOL, 0, 0x34, 0xC0, hpd_tlv),
SOC_ENUM("Headphone Analog Gain", hp_gain_enum),
SOC_DOUBLE_R_SX_TLV("Speaker Volume", CS42L52_SPKA_VOL, - CS42L52_SPKB_VOL, 0, 0x1, 0xff, hl_tlv), + CS42L52_SPKB_VOL, 0, 0x40, 0xC0, hl_tlv),
SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL, - CS42L52_PASSTHRUB_VOL, 6, 0x18, 0x90, pga_tlv), + CS42L52_PASSTHRUB_VOL, 0, 0x88, 0x90, pga_tlv),
SOC_DOUBLE("Bypass Mute", CS42L52_MISC_CTL, 4, 5, 1, 0),
@@ -417,10 +417,10 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_ENUM("MIC Bias Level", mic_bias_level_enum),
SOC_DOUBLE_R_SX_TLV("ADC Volume", CS42L52_ADCA_VOL, - CS42L52_ADCB_VOL, 7, 0x80, 0xA0, ipd_tlv), + CS42L52_ADCB_VOL, 0, 0xA0, 0x78, ipd_tlv), SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume", CS42L52_ADCA_MIXER_VOL, CS42L52_ADCB_MIXER_VOL, - 6, 0x7f, 0x19, ipd_tlv), + 0, 0x19, 0x7F, ipd_tlv),
SOC_DOUBLE("ADC Switch", CS42L52_ADC_MISC_CTL, 0, 1, 1, 0),
@@ -428,11 +428,11 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { CS42L52_ADCB_MIXER_VOL, 7, 1, 1),
SOC_DOUBLE_R_SX_TLV("PGA Volume", CS42L52_PGAA_CTL, - CS42L52_PGAB_CTL, 0, 0x28, 0x30, pga_tlv), + CS42L52_PGAB_CTL, 0, 0x28, 0x24, pga_tlv),
SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 0, 0x7f, 0x19, mix_tlv), + 0, 0x19, 0x7f, mix_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1),
diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c index 48162ee..c766a5a 100644 --- a/sound/soc/codecs/cs42l56.c +++ b/sound/soc/codecs/cs42l56.c @@ -429,15 +429,15 @@ static const struct soc_enum ng_delay_enum = static const struct snd_kcontrol_new cs42l56_snd_controls[] = {
SOC_DOUBLE_R_SX_TLV("Master Volume", CS42L56_MASTER_A_VOLUME, - CS42L56_MASTER_B_VOLUME, 0, 0x34, 0xfd, adv_tlv), + CS42L56_MASTER_B_VOLUME, 0, 0x34, 0xE4, adv_tlv), SOC_DOUBLE("Master Mute Switch", CS42L56_DSP_MUTE_CTL, 0, 1, 1, 1),
SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume", CS42L56_ADCA_MIX_VOLUME, - CS42L56_ADCB_MIX_VOLUME, 0, 0x88, 0xa9, hl_tlv), + CS42L56_ADCB_MIX_VOLUME, 0, 0x88, 0x90, hl_tlv), SOC_DOUBLE("ADC Mixer Mute Switch", CS42L56_DSP_MUTE_CTL, 6, 7, 1, 1),
SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L56_PCMA_MIX_VOLUME, - CS42L56_PCMB_MIX_VOLUME, 0, 0x88, 0xa9, hl_tlv), + CS42L56_PCMB_MIX_VOLUME, 0, 0x88, 0x90, hl_tlv), SOC_DOUBLE("PCM Mixer Mute Switch", CS42L56_DSP_MUTE_CTL, 4, 5, 1, 1),
SOC_SINGLE_TLV("Analog Advisory Volume", @@ -446,16 +446,16 @@ static const struct snd_kcontrol_new cs42l56_snd_controls[] = { CS42L56_DIGINPUT_ADV_VOLUME, 0, 0x00, 1, adv_tlv),
SOC_DOUBLE_R_SX_TLV("PGA Volume", CS42L56_PGAA_MUX_VOLUME, - CS42L56_PGAB_MUX_VOLUME, 0, 0x34, 0xfd, pga_tlv), + CS42L56_PGAB_MUX_VOLUME, 0, 0x34, 0x24, pga_tlv), SOC_DOUBLE_R_TLV("ADC Volume", CS42L56_ADCA_ATTENUATOR, CS42L56_ADCB_ATTENUATOR, 0, 0x00, 1, adc_tlv), SOC_DOUBLE("ADC Mute Switch", CS42L56_MISC_ADC_CTL, 2, 3, 1, 1), SOC_DOUBLE("ADC Boost Switch", CS42L56_GAIN_BIAS_CTL, 3, 2, 1, 1),
SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L56_HPA_VOLUME, - CS42L56_HPB_VOLUME, 0, 0x44, 0x55, hl_tlv), + CS42L56_HPB_VOLUME, 0, 0x84, 0x48, hl_tlv), SOC_DOUBLE_R_SX_TLV("LineOut Volume", CS42L56_LOA_VOLUME, - CS42L56_LOB_VOLUME, 0, 0x44, 0x55, hl_tlv), + CS42L56_LOB_VOLUME, 0, 0x84, 0x48, hl_tlv),
SOC_SINGLE_TLV("Bass Shelving Volume", CS42L56_TONE_CTL, 0, 0x00, 1, tone_tlv), diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index e3b6016..0e7b9eb 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -401,7 +401,7 @@ static const struct snd_kcontrol_new cs42l73_snd_controls[] = { CS42L73_LOBAVOL, 0, 0x41, 0x4B, hpaloa_tlv),
SOC_DOUBLE_R_SX_TLV("Input PGA Analog Volume", CS42L73_MICAPREPGAAVOL, - CS42L73_MICBPREPGABVOL, 5, 0x34, + CS42L73_MICBPREPGABVOL, 0, 0x34, 0x24, micpga_tlv),
SOC_DOUBLE_R("MIC Preamp Switch", CS42L73_MICAPREPGAAVOL,
On Thu, Jul 17, 2014 at 01:16:55PM -0500, Brian Austin wrote:
Remove unnecessary bit shifts. Correct min value to match datasheet. Num steps = number of steps between min and max.
Applied, thanks.
On Thu, Jul 17, 2014 at 01:16:54PM -0500, Brian Austin wrote:
Stereo Headphone and LineOut volume mixers are now attached to HPA+HPB, LOA+LOB.
Applied, thanks. Please word wrap your commit messages.
participants (2)
-
Brian Austin -
Mark Brown