[alsa-devel] [PATCH v2 0/4] ASoC: mt8183: fix audio playback slowly after playback
This series patches add reset controller for MT8183, and audio will use it in machine driver during bootup, they depend on the following patch:
1. this series add support reset-controller in infra [v5,2/2] clk: reset: Modify reset-controller driver https://patchwork.kernel.org/patch/11060419/
v2 changes: 1. remove "WIP" that in the title of patches 2. add hyper link for the patch that depends on
Jiaxin Yu (2): dt-bindings: medaitek: mt8183: add property "resets" && "reset-names" ASoC: mt8183: fix audio playback slowly after playback during bootup
yong.liang (2): dt-bindings: mediatek: mt8183: Add #reset-cells watchdog: mtk_wdt: mt8183: Add reset controller
.../bindings/sound/mt8183-afe-pcm.txt | 6 + .../devicetree/bindings/watchdog/mtk-wdt.txt | 9 +- drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 +++++++++++++++++- .../reset-controller/mt8183-resets.h | 13 +++ sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 15 +++ 6 files changed, 150 insertions(+), 4 deletions(-)
From: "yong.liang" yong.liang@mediatek.corp-partner.google.com
Add #reset-cells property and update example
Signed-off-by: yong.liang yong.liang@mediatek.corp-partner.google.com --- .../devicetree/bindings/watchdog/mtk-wdt.txt | 9 ++++++--- .../dt-bindings/reset-controller/mt8183-resets.h | 13 +++++++++++++ 2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 3ee625d0812f..ecb9ff784832 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -16,11 +16,14 @@ Required properties:
Optional properties: - timeout-sec: contains the watchdog timeout in seconds. +- #reset-cells: Should be 1.
Example:
-wdt: watchdog@10000000 { - compatible = "mediatek,mt6589-wdt"; - reg = <0x10000000 0x18>; +watchdog: watchdog@10007000 { + compatible = "mediatek,mt8183-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; timeout-sec = <10>; + #reset-cells = <1>; }; diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset-controller/mt8183-resets.h index 8804e34ebdd4..47dadcf3fd24 100644 --- a/include/dt-bindings/reset-controller/mt8183-resets.h +++ b/include/dt-bindings/reset-controller/mt8183-resets.h @@ -78,4 +78,17 @@ #define MT8183_INFRACFG_AO_I2C7_SW_RST 126 #define MT8183_INFRACFG_AO_I2C8_SW_RST 127
+#define MT8183_TOPRGU_MM_SW_RST 1 +#define MT8183_TOPRGU_MFG_SW_RST 2 +#define MT8183_TOPRGU_VENC_SW_RST 3 +#define MT8183_TOPRGU_VDEC_SW_RST 4 +#define MT8183_TOPRGU_IMG_SW_RST 5 +#define MT8183_TOPRGU_MD_SW_RST 7 +#define MT8183_TOPRGU_CONN_SW_RST 9 +#define MT8183_TOPRGU_CONN_MCU_SW_RST 12 +#define MT8183_TOPRGU_IPU0_SW_RST 14 +#define MT8183_TOPRGU_IPU1_SW_RST 15 +#define MT8183_TOPRGU_AUDIO_SW_RST 17 +#define MT8183_TOPRGU_CAMSYS_SW_RST 18 + #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8183 */
From: "yong.liang" yong.liang@mediatek.com
Provide assert/deassert/reset API in watchdog driver. Register reset controller for toprgu device in watchdog probe.
Signed-off-by: yong.liang yong.liang@mediatek.com --- drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 ++++++++++++++++++++++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2e07caab9db2..629249fe5305 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST select WATCHDOG_CORE + select RESET_CONTROLLER help Say Y here to include support for the watchdog timer in Mediatek SoCs. diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 9c3d0033260d..660fb0e48d8e 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -20,6 +20,10 @@ #include <linux/types.h> #include <linux/watchdog.h> #include <linux/delay.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/reset.h> +#include <linux/of_device.h>
#define WDT_MAX_TIMEOUT 31 #define WDT_MIN_TIMEOUT 1 @@ -44,17 +48,113 @@ #define WDT_SWRST 0x14 #define WDT_SWRST_KEY 0x1209
+#define WDT_SWSYSRST 0x18U +#define WDT_SWSYS_RST_KEY 0x88000000 + #define DRV_NAME "mtk-wdt" #define DRV_VERSION "1.0"
static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int timeout;
+struct toprgu_reset { + spinlock_t lock; /* Protects reset_controller access */ + void __iomem *toprgu_swrst_base; + int regofs; + struct reset_controller_dev rcdev; +}; + struct mtk_wdt_dev { struct watchdog_device wdt_dev; void __iomem *wdt_base; + struct toprgu_reset reset_controller; + const struct mtk_wdt_compatible *dev_comp; +}; + +struct mtk_wdt_compatible { + int sw_rst_num; +}; + +static int toprgu_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + unsigned int tmp; + unsigned long flags; + struct toprgu_reset *data = container_of(rcdev, + struct toprgu_reset, rcdev); + + spin_lock_irqsave(&data->lock, flags); + + tmp = __raw_readl(data->toprgu_swrst_base + data->regofs); + tmp |= BIT(id); + tmp |= WDT_SWSYS_RST_KEY; + writel(tmp, data->toprgu_swrst_base + data->regofs); + + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static int toprgu_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + unsigned int tmp; + unsigned long flags; + struct toprgu_reset *data = container_of(rcdev, + struct toprgu_reset, rcdev); + + spin_lock_irqsave(&data->lock, flags); + + tmp = __raw_readl(data->toprgu_swrst_base + data->regofs); + tmp &= ~BIT(id); + tmp |= WDT_SWSYS_RST_KEY; + writel(tmp, data->toprgu_swrst_base + data->regofs); + + spin_unlock_irqrestore(&data->lock, flags); + + return 0; +} + +static int toprgu_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + int ret; + + ret = toprgu_reset_assert(rcdev, id); + if (ret) + return ret; + + return toprgu_reset_deassert(rcdev, id); +} + +static struct reset_control_ops toprgu_reset_ops = { + .assert = toprgu_reset_assert, + .deassert = toprgu_reset_deassert, + .reset = toprgu_reset, };
+static void toprgu_register_reset_controller(struct platform_device *pdev, + int regofs) +{ + int ret; + struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev); + + spin_lock_init(&mtk_wdt->reset_controller.lock); + + mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev); + mtk_wdt->reset_controller.toprgu_swrst_base = mtk_wdt->wdt_base; + mtk_wdt->reset_controller.regofs = regofs; + mtk_wdt->reset_controller.rcdev.owner = THIS_MODULE; + mtk_wdt->reset_controller.rcdev.nr_resets = + mtk_wdt->dev_comp->sw_rst_num; + mtk_wdt->reset_controller.rcdev.ops = &toprgu_reset_ops; + mtk_wdt->reset_controller.rcdev.of_node = pdev->dev.of_node; + ret = reset_controller_register(&mtk_wdt->reset_controller.rcdev); + if (ret != 0) + dev_err(&pdev->dev, + "couldn't register wdt reset controller: %d\n", ret); +} + static int mtk_wdt_restart(struct watchdog_device *wdt_dev, unsigned long action, void *data) { @@ -187,9 +287,12 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (unlikely(err)) return err;
- dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", + dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout);
+ mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev); + if (mtk_wdt->dev_comp) + toprgu_register_reset_controller(pdev, WDT_SWSYSRST); return 0; }
@@ -217,7 +320,12 @@ static int mtk_wdt_resume(struct device *dev) } #endif
+static const struct mtk_wdt_compatible mt8183_compat = { + .sw_rst_num = 18, +}; + static const struct of_device_id mtk_wdt_dt_ids[] = { + { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_compat }, { .compatible = "mediatek,mt6589-wdt" }, { /* sentinel */ } };
On Fri, Sep 27, 2019 at 06:31:55PM +0800, Jiaxin Yu wrote:
From: "yong.liang" yong.liang@mediatek.com
Provide assert/deassert/reset API in watchdog driver. Register reset controller for toprgu device in watchdog probe.
Signed-off-by: yong.liang yong.liang@mediatek.com
drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 ++++++++++++++++++++++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2e07caab9db2..629249fe5305 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST select WATCHDOG_CORE
- select RESET_CONTROLLER help Say Y here to include support for the watchdog timer in Mediatek SoCs.
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 9c3d0033260d..660fb0e48d8e 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -20,6 +20,10 @@ #include <linux/types.h> #include <linux/watchdog.h> #include <linux/delay.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/reset.h> +#include <linux/of_device.h>
#define WDT_MAX_TIMEOUT 31 #define WDT_MIN_TIMEOUT 1 @@ -44,17 +48,113 @@ #define WDT_SWRST 0x14 #define WDT_SWRST_KEY 0x1209
+#define WDT_SWSYSRST 0x18U +#define WDT_SWSYS_RST_KEY 0x88000000
#define DRV_NAME "mtk-wdt" #define DRV_VERSION "1.0"
static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int timeout;
+struct toprgu_reset {
- spinlock_t lock; /* Protects reset_controller access */
- void __iomem *toprgu_swrst_base;
- int regofs;
- struct reset_controller_dev rcdev;
+};
struct mtk_wdt_dev { struct watchdog_device wdt_dev; void __iomem *wdt_base;
- struct toprgu_reset reset_controller;
- const struct mtk_wdt_compatible *dev_comp;
+};
+struct mtk_wdt_compatible {
- int sw_rst_num;
+};
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
+}
+static struct reset_control_ops toprgu_reset_ops = {
- .assert = toprgu_reset_assert,
- .deassert = toprgu_reset_deassert,
- .reset = toprgu_reset,
};
+static void toprgu_register_reset_controller(struct platform_device *pdev,
int regofs)+{
- int ret;
- struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
- spin_lock_init(&mtk_wdt->reset_controller.lock);
- mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
- mtk_wdt->reset_controller.toprgu_swrst_base = mtk_wdt->wdt_base;
- mtk_wdt->reset_controller.regofs = regofs;
- mtk_wdt->reset_controller.rcdev.owner = THIS_MODULE;
- mtk_wdt->reset_controller.rcdev.nr_resets =
mtk_wdt->dev_comp->sw_rst_num;- mtk_wdt->reset_controller.rcdev.ops = &toprgu_reset_ops;
- mtk_wdt->reset_controller.rcdev.of_node = pdev->dev.of_node;
- ret = reset_controller_register(&mtk_wdt->reset_controller.rcdev);
- if (ret != 0)
dev_err(&pdev->dev,"couldn't register wdt reset controller: %d\n", ret);+}
static int mtk_wdt_restart(struct watchdog_device *wdt_dev, unsigned long action, void *data) { @@ -187,9 +287,12 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (unlikely(err)) return err;
- dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout);
mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
if (mtk_wdt->dev_comp)
toprgu_register_reset_controller(pdev, WDT_SWSYSRST);
Please explain why you can not use the watchdog device built-in support for handling system resets.
Guenter
return 0; }
@@ -217,7 +320,12 @@ static int mtk_wdt_resume(struct device *dev) } #endif
+static const struct mtk_wdt_compatible mt8183_compat = {
- .sw_rst_num = 18,
+};
static const struct of_device_id mtk_wdt_dt_ids[] = {
- { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_compat }, { .compatible = "mediatek,mt6589-wdt" }, { /* sentinel */ }
};
2.18.0
On Sat, 2019-09-28 at 10:49 -0700, Guenter Roeck wrote:
On Fri, Sep 27, 2019 at 06:31:55PM +0800, Jiaxin Yu wrote:
From: "yong.liang" yong.liang@mediatek.com
Provide assert/deassert/reset API in watchdog driver. Register reset controller for toprgu device in watchdog probe.
Signed-off-by: yong.liang yong.liang@mediatek.com
drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 ++++++++++++++++++++++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2e07caab9db2..629249fe5305 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST select WATCHDOG_CORE
- select RESET_CONTROLLER help Say Y here to include support for the watchdog timer in Mediatek SoCs.
<...snip...>
+static void toprgu_register_reset_controller(struct platform_device *pdev,
int regofs)+{
- int ret;
- struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
- spin_lock_init(&mtk_wdt->reset_controller.lock);
- mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
- mtk_wdt->reset_controller.toprgu_swrst_base = mtk_wdt->wdt_base;
- mtk_wdt->reset_controller.regofs = regofs;
- mtk_wdt->reset_controller.rcdev.owner = THIS_MODULE;
- mtk_wdt->reset_controller.rcdev.nr_resets =
mtk_wdt->dev_comp->sw_rst_num;- mtk_wdt->reset_controller.rcdev.ops = &toprgu_reset_ops;
- mtk_wdt->reset_controller.rcdev.of_node = pdev->dev.of_node;
- ret = reset_controller_register(&mtk_wdt->reset_controller.rcdev);
- if (ret != 0)
dev_err(&pdev->dev,"couldn't register wdt reset controller: %d\n", ret);+}
static int mtk_wdt_restart(struct watchdog_device *wdt_dev, unsigned long action, void *data) { @@ -187,9 +287,12 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (unlikely(err)) return err;
- dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout);
mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
if (mtk_wdt->dev_comp)
toprgu_register_reset_controller(pdev, WDT_SWSYSRST);Please explain why you can not use the watchdog device built-in support for handling system resets.
Guenter,
This is not about system reset. Besides watchdog, MTK toprgu module also provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality. Software can use this to reset specific sub-system.
This patch add support for this using reset controller framework. We follow the case of drivers/clk/mediatek/reset.c to add this functionality in watchdog driver.
Joe.C
On 9/27/19 3:31 AM, Jiaxin Yu wrote:
From: "yong.liang" yong.liang@mediatek.com
Provide assert/deassert/reset API in watchdog driver. Register reset controller for toprgu device in watchdog probe.
Signed-off-by: yong.liang yong.liang@mediatek.com
drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 ++++++++++++++++++++++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2e07caab9db2..629249fe5305 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST select WATCHDOG_CORE
- select RESET_CONTROLLER help Say Y here to include support for the watchdog timer in Mediatek SoCs.
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 9c3d0033260d..660fb0e48d8e 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -20,6 +20,10 @@ #include <linux/types.h> #include <linux/watchdog.h> #include <linux/delay.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/reset.h> +#include <linux/of_device.h>
#define WDT_MAX_TIMEOUT 31 #define WDT_MIN_TIMEOUT 1 @@ -44,17 +48,113 @@ #define WDT_SWRST 0x14 #define WDT_SWRST_KEY 0x1209
+#define WDT_SWSYSRST 0x18U +#define WDT_SWSYS_RST_KEY 0x88000000
#define DRV_NAME "mtk-wdt" #define DRV_VERSION "1.0"
static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int timeout;
+struct toprgu_reset {
- spinlock_t lock; /* Protects reset_controller access */
- void __iomem *toprgu_swrst_base;
- int regofs;
- struct reset_controller_dev rcdev;
+};
- struct mtk_wdt_dev { struct watchdog_device wdt_dev; void __iomem *wdt_base;
- struct toprgu_reset reset_controller;
- const struct mtk_wdt_compatible *dev_comp;
"dev_comp" suggests that this would be a device name. In practice, the only value there is sw_rst_num, and the value is only used in toprgu_register_reset_controller(). Might as well pass it as argument and drop this pointer.
+};
+struct mtk_wdt_compatible {
- int sw_rst_num;
+};
"compatible" is an odd name for this structure. I would suggest to select a more common name such as "mtk_wdt_data".
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
Unless there is additional synchronization elsewhere, parallel calls to the -> assert, and ->reset callbacks may result in the reset being deasserted while at least one caller (the one who called the ->assert function) believes that it is still asserted.
[ ... and if there _is_ additional synchronization elsewhere, the local spinlock would be unnecessary ]
+}
+static struct reset_control_ops toprgu_reset_ops = {
- .assert = toprgu_reset_assert,
- .deassert = toprgu_reset_deassert,
- .reset = toprgu_reset, };
+static void toprgu_register_reset_controller(struct platform_device *pdev,
int regofs)
Since there is only one well defined offset, it seems unnecessary to pass regofs as parameter.
+{
- int ret;
- struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
- spin_lock_init(&mtk_wdt->reset_controller.lock);
- mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
Duplicate, and not really needed. Just pass sw_rst_num as argument.
- mtk_wdt->reset_controller.toprgu_swrst_base = mtk_wdt->wdt_base;
- mtk_wdt->reset_controller.regofs = regofs;
- mtk_wdt->reset_controller.rcdev.owner = THIS_MODULE;
- mtk_wdt->reset_controller.rcdev.nr_resets =
mtk_wdt->dev_comp->sw_rst_num;- mtk_wdt->reset_controller.rcdev.ops = &toprgu_reset_ops;
- mtk_wdt->reset_controller.rcdev.of_node = pdev->dev.of_node;
- ret = reset_controller_register(&mtk_wdt->reset_controller.rcdev);
- if (ret != 0)
dev_err(&pdev->dev,"couldn't register wdt reset controller: %d\n", ret);+}
- static int mtk_wdt_restart(struct watchdog_device *wdt_dev, unsigned long action, void *data) {
@@ -187,9 +287,12 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (unlikely(err)) return err;
- dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout);
mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
if (mtk_wdt->dev_comp)
toprgu_register_reset_controller(pdev, WDT_SWSYSRST);return 0; }
@@ -217,7 +320,12 @@ static int mtk_wdt_resume(struct device *dev) } #endif
+static const struct mtk_wdt_compatible mt8183_compat = {
- .sw_rst_num = 18,
Please no such magic numbers. This should be a define in an include file.
+};
- static const struct of_device_id mtk_wdt_dt_ids[] = {
- { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_compat }, { .compatible = "mediatek,mt6589-wdt" }, { /* sentinel */ } };
On Thu, 2019-10-03 at 06:49 -0700, Guenter Roeck wrote:
On 9/27/19 3:31 AM, Jiaxin Yu wrote:
<snip..>
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
Unless there is additional synchronization elsewhere, parallel calls to the -> assert, and ->reset callbacks may result in the reset being deasserted while at least one caller (the one who called the ->assert function) believes that it is still asserted.
[ ... and if there _is_ additional synchronization elsewhere, the local spinlock would be unnecessary ]
I'm not sure if this count as additional synchronization, but you could get exclusive control to the reset by calling reset_control_get_exclusive so others won't try to reset the component while you are using it.
In this case, you still need spinlock because other drivers might trying to reset their components and they share same register.
Joe.C
On 10/4/19 10:59 PM, Yingjoe Chen wrote:
On Thu, 2019-10-03 at 06:49 -0700, Guenter Roeck wrote:
On 9/27/19 3:31 AM, Jiaxin Yu wrote:
<snip..>
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
Unless there is additional synchronization elsewhere, parallel calls to the -> assert, and ->reset callbacks may result in the reset being deasserted while at least one caller (the one who called the ->assert function) believes that it is still asserted.
[ ... and if there _is_ additional synchronization elsewhere, the local spinlock would be unnecessary ]
I'm not sure if this count as additional synchronization, but you could get exclusive control to the reset by calling reset_control_get_exclusive so others won't try to reset the component while you are using it.
In this case, you still need spinlock because other drivers might trying to reset their components and they share same register.
That isn't what I meant. I referred to synchronization in the reset controller core. AFAICS the reset controller core prevents parallel calls into the same reset controller driver using atomics. Unfortunately, it is not well defined if additional synchronization on driver level is needed - some drivers implement it, some drivers don't, and I don't find a documentation. Maybe Philip can provide guidance.
Thanks, Guenter
Hi Guenter, Yingjoe,
On Sat, 2019-10-05 at 07:46 -0700, Guenter Roeck wrote:
On 10/4/19 10:59 PM, Yingjoe Chen wrote:
On Thu, 2019-10-03 at 06:49 -0700, Guenter Roeck wrote:
On 9/27/19 3:31 AM, Jiaxin Yu wrote:
<snip..>
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
Unless there is additional synchronization elsewhere, parallel calls to the -> assert, and ->reset callbacks may result in the reset being deasserted while at least one caller (the one who called the ->assert function) believes that it is still asserted.
[ ... and if there _is_ additional synchronization elsewhere, the local spinlock would be unnecessary ]
I'm not sure if this count as additional synchronization, but you could get exclusive control to the reset by calling reset_control_get_exclusive so others won't try to reset the component while you are using it.
In this case, you still need spinlock because other drivers might trying to reset their components and they share same register.
That isn't what I meant. I referred to synchronization in the reset controller core. AFAICS the reset controller core prevents parallel calls into the same reset controller driver using atomics.
No, it doesn't. The atomics in struct reset_control prevent parallel calls on the same, reset control only, for shared reset controls. Two calls on different reset controls can still run simultaneously on the same rcdev.
Unfortunately, it is not well defined if additional synchronization on driver level is needed - some drivers implement it, some drivers don't,
I think all drivers protect read/modify/write cycles to shared registers with a spinlock. Those that don't either have separate set/clear registers or use regmap, otherwise it might be a bug.
and I don't find a documentation.
I am aware this is a problem.
regards Philipp
On Fri, 2019-09-27 at 18:31 +0800, Jiaxin Yu wrote:
From: "yong.liang" yong.liang@mediatek.com
Provide assert/deassert/reset API in watchdog driver. Register reset controller for toprgu device in watchdog probe.
I think we could improve this commit message so it is easier to understand what is provided by this patch. You could add something like this:
Besides watchdog, MTK toprgu module also provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality.
Signed-off-by: yong.liang yong.liang@mediatek.com
drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 110 ++++++++++++++++++++++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2e07caab9db2..629249fe5305 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST select WATCHDOG_CORE
- select RESET_CONTROLLER help Say Y here to include support for the watchdog timer in Mediatek SoCs.
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 9c3d0033260d..660fb0e48d8e 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -20,6 +20,10 @@ #include <linux/types.h> #include <linux/watchdog.h> #include <linux/delay.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/reset.h> +#include <linux/of_device.h>
sorting please.
#define WDT_MAX_TIMEOUT 31 #define WDT_MIN_TIMEOUT 1 @@ -44,17 +48,113 @@ #define WDT_SWRST 0x14 #define WDT_SWRST_KEY 0x1209
+#define WDT_SWSYSRST 0x18U +#define WDT_SWSYS_RST_KEY 0x88000000
#define DRV_NAME "mtk-wdt" #define DRV_VERSION "1.0"
static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int timeout;
+struct toprgu_reset {
- spinlock_t lock; /* Protects reset_controller access */
- void __iomem *toprgu_swrst_base;
- int regofs;
- struct reset_controller_dev rcdev;
+};
I'm not sure we need a separate struct, especially when you need to duplicate wdt_base into this struct. After removing regofs/swrst_base, this struct only contain 2 members. Maybe you should just merge this into mtk_wdt_dev.
struct mtk_wdt_dev { struct watchdog_device wdt_dev; void __iomem *wdt_base;
- struct toprgu_reset reset_controller;
- const struct mtk_wdt_compatible *dev_comp;
+};
+struct mtk_wdt_compatible {
- int sw_rst_num;
+};
+static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp |= BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)+{
- unsigned int tmp;
- unsigned long flags;
- struct toprgu_reset *data = container_of(rcdev,
struct toprgu_reset, rcdev);- spin_lock_irqsave(&data->lock, flags);
- tmp = __raw_readl(data->toprgu_swrst_base + data->regofs);
- tmp &= ~BIT(id);
- tmp |= WDT_SWSYS_RST_KEY;
- writel(tmp, data->toprgu_swrst_base + data->regofs);
- spin_unlock_irqrestore(&data->lock, flags);
- return 0;
+}
+static int toprgu_reset(struct reset_controller_dev *rcdev,
unsigned long id)+{
- int ret;
- ret = toprgu_reset_assert(rcdev, id);
- if (ret)
return ret;- return toprgu_reset_deassert(rcdev, id);
+}
+static struct reset_control_ops toprgu_reset_ops = {
static const
- .assert = toprgu_reset_assert,
- .deassert = toprgu_reset_deassert,
- .reset = toprgu_reset,
};
+static void toprgu_register_reset_controller(struct platform_device *pdev,
int regofs)+{
- int ret;
- struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
- spin_lock_init(&mtk_wdt->reset_controller.lock);
- mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
- mtk_wdt->reset_controller.toprgu_swrst_base = mtk_wdt->wdt_base;
- mtk_wdt->reset_controller.regofs = regofs;
- mtk_wdt->reset_controller.rcdev.owner = THIS_MODULE;
- mtk_wdt->reset_controller.rcdev.nr_resets =
mtk_wdt->dev_comp->sw_rst_num;- mtk_wdt->reset_controller.rcdev.ops = &toprgu_reset_ops;
- mtk_wdt->reset_controller.rcdev.of_node = pdev->dev.of_node;
- ret = reset_controller_register(&mtk_wdt->reset_controller.rcdev);
- if (ret != 0)
dev_err(&pdev->dev,"couldn't register wdt reset controller: %d\n", ret);
If this fail, you should return it and make mtk_wdt_probe also return fail.
+}
static int mtk_wdt_restart(struct watchdog_device *wdt_dev, unsigned long action, void *data) { @@ -187,9 +287,12 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (unlikely(err)) return err;
- dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout);
mtk_wdt->dev_comp = of_device_get_match_data(&pdev->dev);
if (mtk_wdt->dev_comp)
toprgu_register_reset_controller(pdev, WDT_SWSYSRST);
Is this register offset WDT_SWSYSRST identical in all chips? If it is, you should hardcode it in assert/deassert, just like how we access other watchdog registers. If not, you should put it in mtk_wdt_compatible.
return 0; }
@@ -217,7 +320,12 @@ static int mtk_wdt_resume(struct device *dev) } #endif
+static const struct mtk_wdt_compatible mt8183_compat = {
- .sw_rst_num = 18,
+};
static const struct of_device_id mtk_wdt_dt_ids[] = {
- { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_compat }, { .compatible = "mediatek,mt6589-wdt" },
sorting please
Joe.C
{ /* sentinel */ } };
This patch add property "resets" && "reset-names" in examples so that we can use reset controller to reset audio domain regs.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com --- Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt index 396ba38619f6..1f1cba4152ce 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt @@ -4,6 +4,10 @@ Required properties: - compatible = "mediatek,mt68183-audio"; - reg: register location and size - interrupts: should contain AFE interrupt +- resets: Must contain an entry for each entry in reset-names + See ../reset/reset.txt for details. +- reset-names: should have these reset names: + "audiosys"; - power-domains: should define the power domain - clocks: Must contain an entry for each entry in clock-names - clock-names: should have these clock names: @@ -20,6 +24,8 @@ Example: compatible = "mediatek,mt8183-audio"; reg = <0 0x11220000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; clocks = <&infrasys CLK_INFRA_AUDIO>, <&infrasys CLK_INFRA_AUDIO_26M_BCLK>,
The patch
dt-bindings: medaitek: mt8183: add property "resets" && "reset-names"
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8d6aa1367a7df44bb5939c4bb2727b8d8f7d01b3 Mon Sep 17 00:00:00 2001
From: Jiaxin Yu jiaxin.yu@mediatek.com Date: Fri, 27 Sep 2019 18:31:56 +0800 Subject: [PATCH] dt-bindings: medaitek: mt8183: add property "resets" && "reset-names"
This patch add property "resets" && "reset-names" in examples so that we can use reset controller to reset audio domain regs.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com Link: https://lore.kernel.org/r/1569580317-21181-4-git-send-email-jiaxin.yu@mediat... Signed-off-by: Mark Brown broonie@kernel.org --- Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt index 396ba38619f6..1f1cba4152ce 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt @@ -4,6 +4,10 @@ Required properties: - compatible = "mediatek,mt68183-audio"; - reg: register location and size - interrupts: should contain AFE interrupt +- resets: Must contain an entry for each entry in reset-names + See ../reset/reset.txt for details. +- reset-names: should have these reset names: + "audiosys"; - power-domains: should define the power domain - clocks: Must contain an entry for each entry in clock-names - clock-names: should have these clock names: @@ -20,6 +24,8 @@ Example: compatible = "mediatek,mt8183-audio"; reg = <0 0x11220000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; clocks = <&infrasys CLK_INFRA_AUDIO>, <&infrasys CLK_INFRA_AUDIO_26M_BCLK>,
Before regmap_reinit_cache we must reset audio regs as default values. So we use reset controller unit(toprgu) to reset audio hw.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com --- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 4a31106d3471..721632386a50 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -11,6 +11,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/pm_runtime.h> +#include <linux/reset.h>
#include "mt8183-afe-common.h" #include "mt8183-afe-clk.h" @@ -1089,6 +1090,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) struct mtk_base_afe *afe; struct mt8183_afe_private *afe_priv; struct device *dev; + struct reset_control *rstc; int i, irq_id, ret;
afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); @@ -1126,6 +1128,19 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) return ret; }
+ rstc = devm_reset_control_get(dev, "audiosys"); + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + dev_err(dev, "could not get audiosys reset:%d\n", ret); + return ret; + } + + ret = reset_control_reset(rstc); + if (ret) { + dev_err(dev, "failed to trigger audio reset:%d\n", ret); + return ret; + } + /* enable clock for regcache get default value from hw */ afe_priv->pm_runtime_bypass_reg_ctl = true; pm_runtime_get_sync(&pdev->dev);
On Fri, 2019-09-27 at 18:31 +0800, Jiaxin Yu wrote:
Before regmap_reinit_cache we must reset audio regs as default values. So we use reset controller unit(toprgu) to reset audio hw.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com
This one looks good to me. You could add this if you want
Reviewed-by: Yingjoe Chen yingjoe.chen@mediatek.com
Joe.C
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 4a31106d3471..721632386a50 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -11,6 +11,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/pm_runtime.h> +#include <linux/reset.h>
#include "mt8183-afe-common.h" #include "mt8183-afe-clk.h" @@ -1089,6 +1090,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) struct mtk_base_afe *afe; struct mt8183_afe_private *afe_priv; struct device *dev;
struct reset_control *rstc; int i, irq_id, ret;
afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL);
@@ -1126,6 +1128,19 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) return ret; }
- rstc = devm_reset_control_get(dev, "audiosys");
- if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);dev_err(dev, "could not get audiosys reset:%d\n", ret);return ret;- }
- ret = reset_control_reset(rstc);
- if (ret) {
dev_err(dev, "failed to trigger audio reset:%d\n", ret);return ret;- }
- /* enable clock for regcache get default value from hw */ afe_priv->pm_runtime_bypass_reg_ctl = true; pm_runtime_get_sync(&pdev->dev);
On Fri, Sep 27, 2019 at 06:31:57PM +0800, Jiaxin Yu wrote:
- rstc = devm_reset_control_get(dev, "audiosys");
- if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);dev_err(dev, "could not get audiosys reset:%d\n", ret);return ret;- }
- ret = reset_control_reset(rstc);
- if (ret) {
dev_err(dev, "failed to trigger audio reset:%d\n", ret);return ret;- }
This means that we're going to be incompatible with old DT bindings that don't specify a reset controller. I don't know how widely used these bindings are so we may be able to get away with this and I'll apply but we shouldn't be doing it, the code might need to be fixed to make this optional if people complain.
The patch
ASoC: mt8183: fix audio playback slowly after playback during bootup
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 9e985503ee4b23d576c303a17dfe52cfc8f32727 Mon Sep 17 00:00:00 2001
From: Jiaxin Yu jiaxin.yu@mediatek.com Date: Fri, 27 Sep 2019 18:31:57 +0800 Subject: [PATCH] ASoC: mt8183: fix audio playback slowly after playback during bootup
Before regmap_reinit_cache we must reset audio regs as default values. So we use reset controller unit(toprgu) to reset audio hw.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com Reviewed-by: Yingjoe Chen yingjoe.chen@mediatek.com Link: https://lore.kernel.org/r/1569580317-21181-5-git-send-email-jiaxin.yu@mediat... Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 4a31106d3471..721632386a50 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -11,6 +11,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/pm_runtime.h> +#include <linux/reset.h>
#include "mt8183-afe-common.h" #include "mt8183-afe-clk.h" @@ -1089,6 +1090,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) struct mtk_base_afe *afe; struct mt8183_afe_private *afe_priv; struct device *dev; + struct reset_control *rstc; int i, irq_id, ret;
afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); @@ -1126,6 +1128,19 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) return ret; }
+ rstc = devm_reset_control_get(dev, "audiosys"); + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + dev_err(dev, "could not get audiosys reset:%d\n", ret); + return ret; + } + + ret = reset_control_reset(rstc); + if (ret) { + dev_err(dev, "failed to trigger audio reset:%d\n", ret); + return ret; + } + /* enable clock for regcache get default value from hw */ afe_priv->pm_runtime_bypass_reg_ctl = true; pm_runtime_get_sync(&pdev->dev);
participants (5)
-
Guenter Roeck -
Jiaxin Yu -
Mark Brown -
Philipp Zabel -
Yingjoe Chen