We've added a fake mute control (setting the amp volume to zero) for CX5051 at commit [3868137e: ALSA: hda - Add a fake mute feature], but this feature was overlooked in the generic parser implementation. Now the driver lacks of mute controls on these codecs.

The fix is just to check both AC_AMPCAP_MUTE and AC_AMPCAP_MIN_MUTE bits in each place checking the amp capabilities.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59001 Cc: stable@vger.kernel.org [v3.9+] Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/hda/hda_generic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 8e77cbb..e3c7ba8 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -522,7 +522,7 @@ static bool same_amp_caps(struct hda_codec *codec, hda_nid_t nid1, }

#define nid_has_mute(codec, nid, dir) \ - check_amp_caps(codec, nid, dir, AC_AMPCAP_MUTE) + check_amp_caps(codec, nid, dir, (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) #define nid_has_volume(codec, nid, dir) \ check_amp_caps(codec, nid, dir, AC_AMPCAP_NUM_STEPS)

@@ -624,7 +624,7 @@ static int get_amp_val_to_activate(struct hda_codec *codec, hda_nid_t nid, if (enable) val = (caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT; } - if (caps & AC_AMPCAP_MUTE) { + if (caps & (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) { if (!enable) val |= HDA_AMP_MUTE; } @@ -648,7 +648,7 @@ static unsigned int get_amp_mask_to_modify(struct hda_codec *codec, { unsigned int mask = 0xff;

- if (caps & AC_AMPCAP_MUTE) { + if (caps & (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) { if (is_ctl_associated(codec, nid, dir, idx, NID_PATH_MUTE_CTL)) mask &= ~0x80; }