[alsa-devel] udev rules prefix
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
--- configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]), - [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"]) + [udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev --variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
I suggest that the udev rules directory follows the prefix or append /usr to it to resolve this.
Cheers!
Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote:
Hello,
the default prefix for alsa-utils is /usr however the udev rules directory is /lib/udev/rules.d thus on setups with separate partition for /usr the binaries, from /usr/bin and /usr/sbin, will likely not be available during the boot process and the udev rule will fail to restore the state.
Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
--- configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir], - AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]), - [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"]) + AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where to install udev rules to (default=auto)]), + [udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev --variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
At Thu, 14 Nov 2013 18:49:02 +0000, Ivailo Monev wrote:
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote:
On 11/13/2013 09:36 PM, Ivailo wrote: > Hello, > > the default prefix for alsa-utils is /usr however the udev rules directory > is /lib/udev/rules.d thus on setups with separate partition for /usr the > binaries, from /usr/bin and /usr/sbin, will likely not be available during > the boot process and the udev rule will fail to restore the state. > > I suggest that the udev rules directory follows the prefix or append /usr > to it to resolve this. > > Cheers! Hi,
ALSA merely follows what udev dictates, so I think your question/suggestion is better redirected on the udev (now systemd) mailinglist. Or potentially that of your distro.
Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote:
At Wed, 13 Nov 2013 20:36:48 +0000, Ivailo wrote: > Hello, > > the default prefix for alsa-utils is /usr however the udev rules directory > is /lib/udev/rules.d thus on setups with separate partition for /usr the > binaries, from /usr/bin and /usr/sbin, will likely not be available during > the boot process and the udev rule will fail to restore the state. Not true. /lib must be always present at boot even if /usr isn't mounted. That's the reason why /lib/udev was chosen as default in the past.
Takashi
You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
udev.pc is no hard requirement for alsa-utils, thus there is no guarantee that "pkg-config udev" works as you expected. If it's not installed, pkg-config doesn't complain but just gives an empty string.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
1.8.3.4
If you are not happy with my patch you can write your own based which uses the pkg-config approach without hesitation, I will not get upset.
And still, will you do something about separate /usr or not? Just asking. As stated before, this patch will not solve it but replace the path hard coding with a flexible method.
It's matter distributors decide. The default value is just some value that might work. Users and distros must read the document and give the proper configure options.
Takashi
On 11/14/13 16:14, Takashi Iwai wrote:
At Thu, 14 Nov 2013 18:49:02 +0000, Ivailo Monev wrote:
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote:
On 11/14/13 02:48, David Henningsson wrote: > On 11/13/2013 09:36 PM, Ivailo wrote: >> Hello, >> >> the default prefix for alsa-utils is /usr however the udev rules directory >> is /lib/udev/rules.d thus on setups with separate partition for /usr the >> binaries, from /usr/bin and /usr/sbin, will likely not be available during >> the boot process and the udev rule will fail to restore the state. >> >> I suggest that the udev rules directory follows the prefix or append /usr >> to it to resolve this. >> >> Cheers! > Hi, > > ALSA merely follows what udev dictates, so I think your > question/suggestion is better redirected on the udev (now systemd) > mailinglist. Or potentially that of your distro. > Actually, you are not following what udev dictates (unless I'm missing something). By default, systemd (and more importantly udev) will be installed with /usr prefix (which is wrong in it self because it blindly assumes that /usr has been mounted via initrd/initramfs where separate /usr partition is in use but let's not talk about this here).
On 11/14/13 06:45, Takashi Iwai wrote: > At Wed, 13 Nov 2013 20:36:48 +0000, > Ivailo wrote: >> Hello, >> >> the default prefix for alsa-utils is /usr however the udev rules directory >> is /lib/udev/rules.d thus on setups with separate partition for /usr the >> binaries, from /usr/bin and /usr/sbin, will likely not be available during >> the boot process and the udev rule will fail to restore the state. > Not true. /lib must be always present at boot even if /usr isn't > mounted. That's the reason why /lib/udev was chosen as default in the > past. > > > Takashi You got me wrong, I know that /lib should be available on early boot (unless it's a symlink, like in Arch Linux) but the point is that since the alsa-utils binaries are installed in /usr so should be the udev rules otherwise during boot without /usr being mounted you will see error message about /usr/sbin/alsactl.
Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
udev.pc is no hard requirement for alsa-utils, thus there is no guarantee that "pkg-config udev" works as you expected. If it's not installed, pkg-config doesn't complain but just gives an empty string.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
1.8.3.4
If you are not happy with my patch you can write your own based which uses the pkg-config approach without hesitation, I will not get upset.
And still, will you do something about separate /usr or not? Just asking. As stated before, this patch will not solve it but replace the path hard coding with a flexible method.
It's matter distributors decide. The default value is just some value that might work. Users and distros must read the document and give the proper configure options.
Takashi
Sorry for the late reply.
So, I get that there is a variation from distribution to distribution. But what if udevrulesdir respects the default prefix (AC_PREFIX_DEFAULT)? That way, the issue in my first email will be solved. Will a patch for it be accepted?
At Fri, 15 Nov 2013 13:16:41 +0000, Ivailo Monev wrote:
On 11/14/13 16:14, Takashi Iwai wrote:
At Thu, 14 Nov 2013 18:49:02 +0000, Ivailo Monev wrote:
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote:
At Thu, 14 Nov 2013 12:08:47 +0000, Ivailo Monev wrote: > On 11/14/13 02:48, David Henningsson wrote: >> On 11/13/2013 09:36 PM, Ivailo wrote: >>> Hello, >>> >>> the default prefix for alsa-utils is /usr however the udev rules directory >>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>> the boot process and the udev rule will fail to restore the state. >>> >>> I suggest that the udev rules directory follows the prefix or append /usr >>> to it to resolve this. >>> >>> Cheers! >> Hi, >> >> ALSA merely follows what udev dictates, so I think your >> question/suggestion is better redirected on the udev (now systemd) >> mailinglist. Or potentially that of your distro. >> > Actually, you are not following what udev dictates (unless I'm missing > something). > By default, systemd (and more importantly udev) will be installed with > /usr prefix > (which is wrong in it self because it blindly assumes that /usr has been > mounted > via initrd/initramfs where separate /usr partition is in use but let's > not talk about > this here). > > > On 11/14/13 06:45, Takashi Iwai wrote: >> At Wed, 13 Nov 2013 20:36:48 +0000, >> Ivailo wrote: >>> Hello, >>> >>> the default prefix for alsa-utils is /usr however the udev rules directory >>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>> the boot process and the udev rule will fail to restore the state. >> Not true. /lib must be always present at boot even if /usr isn't >> mounted. That's the reason why /lib/udev was chosen as default in the >> past. >> >> >> Takashi > You got me wrong, I know that /lib should be available on early boot > (unless it's a > symlink, like in Arch Linux) but the point is that since the alsa-utils > binaries are > installed in /usr so should be the udev rules otherwise during boot > without /usr > being mounted you will see error message about /usr/sbin/alsactl. Theoretically yes, but this has been rather less problems than creating a non-existing /usr/lib/udev in the past. That's the very reason of hard-coded /lib/udev. Changing the default behavior is often worse unless you really do it carefully with consideration of compatibility with old systems.
So, if you want to change the default, don't hard code again. Make configure to guess the right place. A patch achieving it is welcome.
Takashi
Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
udev.pc is no hard requirement for alsa-utils, thus there is no guarantee that "pkg-config udev" works as you expected. If it's not installed, pkg-config doesn't complain but just gives an empty string.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
1.8.3.4
If you are not happy with my patch you can write your own based which uses the pkg-config approach without hesitation, I will not get upset.
And still, will you do something about separate /usr or not? Just asking. As stated before, this patch will not solve it but replace the path hard coding with a flexible method.
It's matter distributors decide. The default value is just some value that might work. Users and distros must read the document and give the proper configure options.
Takashi
Sorry for the late reply.
So, I get that there is a variation from distribution to distribution. But what if udevrulesdir respects the default prefix (AC_PREFIX_DEFAULT)? That way, the issue in my first email will be solved. Will a patch for it be accepted?
It'd break the previously working behavior.
Simply fallback to the old value (/lib/udev/) when pkg-config gives an empty string. That should suffice for both cases.
Takashi
On 11/15/13 10:29, Takashi Iwai wrote:
At Fri, 15 Nov 2013 13:16:41 +0000, Ivailo Monev wrote:
On 11/14/13 16:14, Takashi Iwai wrote:
At Thu, 14 Nov 2013 18:49:02 +0000, Ivailo Monev wrote:
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote:
On 11/14/13 09:42, Takashi Iwai wrote: > At Thu, 14 Nov 2013 12:08:47 +0000, > Ivailo Monev wrote: >> On 11/14/13 02:48, David Henningsson wrote: >>> On 11/13/2013 09:36 PM, Ivailo wrote: >>>> Hello, >>>> >>>> the default prefix for alsa-utils is /usr however the udev rules directory >>>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>>> the boot process and the udev rule will fail to restore the state. >>>> >>>> I suggest that the udev rules directory follows the prefix or append /usr >>>> to it to resolve this. >>>> >>>> Cheers! >>> Hi, >>> >>> ALSA merely follows what udev dictates, so I think your >>> question/suggestion is better redirected on the udev (now systemd) >>> mailinglist. Or potentially that of your distro. >>> >> Actually, you are not following what udev dictates (unless I'm missing >> something). >> By default, systemd (and more importantly udev) will be installed with >> /usr prefix >> (which is wrong in it self because it blindly assumes that /usr has been >> mounted >> via initrd/initramfs where separate /usr partition is in use but let's >> not talk about >> this here). >> >> >> On 11/14/13 06:45, Takashi Iwai wrote: >>> At Wed, 13 Nov 2013 20:36:48 +0000, >>> Ivailo wrote: >>>> Hello, >>>> >>>> the default prefix for alsa-utils is /usr however the udev rules directory >>>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>>> the boot process and the udev rule will fail to restore the state. >>> Not true. /lib must be always present at boot even if /usr isn't >>> mounted. That's the reason why /lib/udev was chosen as default in the >>> past. >>> >>> >>> Takashi >> You got me wrong, I know that /lib should be available on early boot >> (unless it's a >> symlink, like in Arch Linux) but the point is that since the alsa-utils >> binaries are >> installed in /usr so should be the udev rules otherwise during boot >> without /usr >> being mounted you will see error message about /usr/sbin/alsactl. > Theoretically yes, but this has been rather less problems than > creating a non-existing /usr/lib/udev in the past. That's the very > reason of hard-coded /lib/udev. Changing the default behavior is > often worse unless you really do it carefully with consideration of > compatibility with old systems. > > So, if you want to change the default, don't hard code again. Make > configure to guess the right place. A patch achieving it is welcome. > > > Takashi Ok, here is the patch:
From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 13:13:43 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/configure.in b/configure.in index 3ae3209..74b891e 100644 --- a/configure.in +++ b/configure.in @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) AC_ARG_WITH( [udev-rules-dir], AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
[udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)"/rules.d"]) AC_SUBST(udevrulesdir)
This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
udev.pc is no hard requirement for alsa-utils, thus there is no guarantee that "pkg-config udev" works as you expected. If it's not installed, pkg-config doesn't complain but just gives an empty string.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.-- 1.8.3.4
If you are not happy with my patch you can write your own based which uses the pkg-config approach without hesitation, I will not get upset.
And still, will you do something about separate /usr or not? Just asking. As stated before, this patch will not solve it but replace the path hard coding with a flexible method.
It's matter distributors decide. The default value is just some value that might work. Users and distros must read the document and give the proper configure options.
Takashi
Sorry for the late reply.
So, I get that there is a variation from distribution to distribution. But what if udevrulesdir respects the default prefix (AC_PREFIX_DEFAULT)? That way, the issue in my first email will be solved. Will a patch for it be accepted?
It'd break the previously working behavior.
Simply fallback to the old value (/lib/udev/) when pkg-config gives an empty string. That should suffice for both cases.
Takashi
From 8bfe323092f08e8326dddbb6c15029845556f468 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Fri, 15 Nov 2013 14:05:02 +0000 Subject: [PATCH] detect udevdir via pkg-config, fallback to /lib/udev/rules.d
Signed-off-by: Ivailo Monev xakepa10@gmail.com --- configure.in | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..60da1fa 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,14 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir], - AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]), - [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"]) + AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where to install udev rules to (default=auto)]), + [udevrulesdir="$withval"], + [udevdir=$($PKG_CONFIG udev --variable=udevdir) + if test "x$udevdir" = "x"; then + udevrulesdir="/lib/udev/rules.d" + else + udevrulesdir="$udevdir/rules.d" + fi]) AC_SUBST(udevrulesdir)
dnl Checks for header files.
At Sat, 16 Nov 2013 14:00:19 +0000, Ivailo Monev wrote:
On 11/15/13 10:29, Takashi Iwai wrote:
At Fri, 15 Nov 2013 13:16:41 +0000, Ivailo Monev wrote:
On 11/14/13 16:14, Takashi Iwai wrote:
At Thu, 14 Nov 2013 18:49:02 +0000, Ivailo Monev wrote:
On 11/14/13 10:51, Takashi Iwai wrote:
At Thu, 14 Nov 2013 13:24:49 +0000, Ivailo Monev wrote: > On 11/14/13 09:42, Takashi Iwai wrote: >> At Thu, 14 Nov 2013 12:08:47 +0000, >> Ivailo Monev wrote: >>> On 11/14/13 02:48, David Henningsson wrote: >>>> On 11/13/2013 09:36 PM, Ivailo wrote: >>>>> Hello, >>>>> >>>>> the default prefix for alsa-utils is /usr however the udev rules directory >>>>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>>>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>>>> the boot process and the udev rule will fail to restore the state. >>>>> >>>>> I suggest that the udev rules directory follows the prefix or append /usr >>>>> to it to resolve this. >>>>> >>>>> Cheers! >>>> Hi, >>>> >>>> ALSA merely follows what udev dictates, so I think your >>>> question/suggestion is better redirected on the udev (now systemd) >>>> mailinglist. Or potentially that of your distro. >>>> >>> Actually, you are not following what udev dictates (unless I'm missing >>> something). >>> By default, systemd (and more importantly udev) will be installed with >>> /usr prefix >>> (which is wrong in it self because it blindly assumes that /usr has been >>> mounted >>> via initrd/initramfs where separate /usr partition is in use but let's >>> not talk about >>> this here). >>> >>> >>> On 11/14/13 06:45, Takashi Iwai wrote: >>>> At Wed, 13 Nov 2013 20:36:48 +0000, >>>> Ivailo wrote: >>>>> Hello, >>>>> >>>>> the default prefix for alsa-utils is /usr however the udev rules directory >>>>> is /lib/udev/rules.d thus on setups with separate partition for /usr the >>>>> binaries, from /usr/bin and /usr/sbin, will likely not be available during >>>>> the boot process and the udev rule will fail to restore the state. >>>> Not true. /lib must be always present at boot even if /usr isn't >>>> mounted. That's the reason why /lib/udev was chosen as default in the >>>> past. >>>> >>>> >>>> Takashi >>> You got me wrong, I know that /lib should be available on early boot >>> (unless it's a >>> symlink, like in Arch Linux) but the point is that since the alsa-utils >>> binaries are >>> installed in /usr so should be the udev rules otherwise during boot >>> without /usr >>> being mounted you will see error message about /usr/sbin/alsactl. >> Theoretically yes, but this has been rather less problems than >> creating a non-existing /usr/lib/udev in the past. That's the very >> reason of hard-coded /lib/udev. Changing the default behavior is >> often worse unless you really do it carefully with consideration of >> compatibility with old systems. >> >> So, if you want to change the default, don't hard code again. Make >> configure to guess the right place. A patch achieving it is welcome. >> >> >> Takashi > Ok, here is the patch: > > From 74faeceb26c4730d6150e726792f6eb1f257b03e Mon Sep 17 00:00:00 2001 > From: Ivailo Monev xakepa10@gmail.com > Date: Thu, 14 Nov 2013 13:13:43 +0000 > Subject: [PATCH 1/1] detect udevdir via pkg-config > > --- > configure.in | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configure.in b/configure.in > index 3ae3209..74b891e 100644 > --- a/configure.in > +++ b/configure.in > @@ -121,7 +121,7 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) > AC_ARG_WITH( > [udev-rules-dir], > AS_HELP_STRING([--with-udev-rules-dir],[Directory where to > install udev rules to (defaults to /lib/udev/rules.d)]), > - [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"]) > + [udevrulesdir=$withval], [udevrulesdir=$($PKG_CONFIG udev > --variable=udevdir)"/rules.d"]) > AC_SUBST(udevrulesdir) This pkg-config option isn't always available. Make sure to have a proper fallback to /lib/udev/rules.d. Also, update the help text, too.
thanks,
Takashi
I'm not an autotools guru but there is PKG_PROG_PKG_CONFIG in configure.in which is supposed to ensure that pkg-config is installed, right? Besides, with_systemdsystemunitdir uses almost the same method as in my patch which I looked at before submitting it.
udev.pc is no hard requirement for alsa-utils, thus there is no guarantee that "pkg-config udev" works as you expected. If it's not installed, pkg-config doesn't complain but just gives an empty string.
Anyway, here is an updated patch that keeps things more like the other tests in configure.in:
From b30824ef1682f3040d53c1495dae308f51a4f380 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Thu, 14 Nov 2013 18:41:55 +0000 Subject: [PATCH 1/1] detect udevdir via pkg-config
configure.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/configure.in b/configure.in index 3ae3209..e8e1e82 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,8 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"], [udevrulesdir=$($PKG_CONFIG udev--variable=udevdir)/rules.d]) AC_SUBST(udevrulesdir)
dnl Checks for header files.-- 1.8.3.4
If you are not happy with my patch you can write your own based which uses the pkg-config approach without hesitation, I will not get upset.
And still, will you do something about separate /usr or not? Just asking. As stated before, this patch will not solve it but replace the path hard coding with a flexible method.
It's matter distributors decide. The default value is just some value that might work. Users and distros must read the document and give the proper configure options.
Takashi
Sorry for the late reply.
So, I get that there is a variation from distribution to distribution. But what if udevrulesdir respects the default prefix (AC_PREFIX_DEFAULT)? That way, the issue in my first email will be solved. Will a patch for it be accepted?
It'd break the previously working behavior.
Simply fallback to the old value (/lib/udev/) when pkg-config gives an empty string. That should suffice for both cases.
Takashi
From 8bfe323092f08e8326dddbb6c15029845556f468 Mon Sep 17 00:00:00 2001 From: Ivailo Monev xakepa10@gmail.com Date: Fri, 15 Nov 2013 14:05:02 +0000 Subject: [PATCH] detect udevdir via pkg-config, fallback to /lib/udev/rules.d
Signed-off-by: Ivailo Monev xakepa10@gmail.com
Thanks, applied.
(Though, the patch couldn't be applied as is because your mailer broke spaces or lines, so I had to apply it manually. At the next time, please fix MUA setup or use an attachment if it's difficult.)
Takashi
configure.in | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/configure.in b/configure.in index 3ae3209..60da1fa 100644 --- a/configure.in +++ b/configure.in @@ -120,8 +120,14 @@ AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
AC_ARG_WITH( [udev-rules-dir],
AS_HELP_STRING([--with-udev-rules-dir],[Directory where toinstall udev rules to (defaults to /lib/udev/rules.d)]),
[udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
AS_HELP_STRING([--with-udev-rules-dir=DIR],[Directory where toinstall udev rules to (default=auto)]),
[udevrulesdir="$withval"],[udevdir=$($PKG_CONFIG udev --variable=udevdir)if test "x$udevdir" = "x"; thenudevrulesdir="/lib/udev/rules.d"elseudevrulesdir="$udevdir/rules.d"fi])AC_SUBST(udevrulesdir)
dnl Checks for header files.
-- 1.8.3.4
Cheers! _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
participants (4)
-
David Henningsson -
Ivailo -
Ivailo Monev
-
Takashi Iwai