[alsa-devel] [PATCH V4] ASoC: cs42xx8: add reset-gpios in binding document
Add reset-gpios property, which is optional.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- Changes in V4 - use gpios instead of gpio
Changes in RESEND v3 - send updated binding document only
Changes in v3 - update binding document.
Changes in v2 - use devm_gpiod_get_optional instead of of_get_named_gpio
Documentation/devicetree/bindings/sound/cs42xx8.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt index 8619a156d038..0138ef559cc4 100644 --- a/Documentation/devicetree/bindings/sound/cs42xx8.txt +++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt @@ -14,6 +14,11 @@ Required properties: - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+Optional properties: + + - reset-gpios : a GPIO spec to define which pin is connected to the chip's + !RESET pin + Example:
cs42888: codec@48 { @@ -25,4 +30,5 @@ cs42888: codec@48 { VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>; + reset-gpios = <&pca9557_b 1 1>; };
On Thu, May 16, 2019 at 8:36 AM S.j. Wang shengjiu.wang@nxp.com wrote:
cs42888: codec@48 { @@ -25,4 +30,5 @@ cs42888: codec@48 { VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>;
reset-gpios = <&pca9557_b 1 1>;
reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; please
participants (2)
-
Fabio Estevam
-
S.j. Wang