[RESEND PATCH] ASoC: codecs: lpass: fix the order or clks turn off during suspend
The order in which clocks are stopped matters as some of the clock like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error: qcom_q6v5_pas 17300000.remoteproc: fatal error received: ABT_dal.c:278:ABTimeout: AHB Bus hang is detected, Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
Turn off fsgen first, followed by npl and then finally mclk, which is exactly the opposite order of enable sequence.
Fixes: 1dc3459009c3 ("ASoC: codecs: lpass: register mclk after runtime pm") Reported-by: Amit Pundir amit.pundir@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org ---
Sorry for noise, resending this one, as I missed the asoc mailing list in my previous send.
sound/soc/codecs/lpass-rx-macro.c | 4 ++-- sound/soc/codecs/lpass-tx-macro.c | 4 ++-- sound/soc/codecs/lpass-wsa-macro.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index 9e0a4e8a46c3..372bea8b3525 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -3668,9 +3668,9 @@ static int __maybe_unused rx_macro_runtime_suspend(struct device *dev) regcache_cache_only(rx->regmap, true); regcache_mark_dirty(rx->regmap);
- clk_disable_unprepare(rx->mclk); - clk_disable_unprepare(rx->npl); clk_disable_unprepare(rx->fsgen); + clk_disable_unprepare(rx->npl); + clk_disable_unprepare(rx->mclk);
return 0; } diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index b044c9c6f89b..d9318799f6b7 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -2096,9 +2096,9 @@ static int __maybe_unused tx_macro_runtime_suspend(struct device *dev) regcache_cache_only(tx->regmap, true); regcache_mark_dirty(tx->regmap);
- clk_disable_unprepare(tx->mclk); - clk_disable_unprepare(tx->npl); clk_disable_unprepare(tx->fsgen); + clk_disable_unprepare(tx->npl); + clk_disable_unprepare(tx->mclk);
return 0; } diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index 728f26d12ab0..6484c335bd5d 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -2504,9 +2504,9 @@ static int __maybe_unused wsa_macro_runtime_suspend(struct device *dev) regcache_cache_only(wsa->regmap, true); regcache_mark_dirty(wsa->regmap);
- clk_disable_unprepare(wsa->mclk); - clk_disable_unprepare(wsa->npl); clk_disable_unprepare(wsa->fsgen); + clk_disable_unprepare(wsa->npl); + clk_disable_unprepare(wsa->mclk);
return 0; }
On Thu, 23 Mar 2023 at 16:31, Srinivas Kandagatla srinivas.kandagatla@linaro.org wrote:
The order in which clocks are stopped matters as some of the clock like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error: qcom_q6v5_pas 17300000.remoteproc: fatal error received: ABT_dal.c:278:ABTimeout: AHB Bus hang is detected, Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
Turn off fsgen first, followed by npl and then finally mclk, which is exactly the opposite order of enable sequence.
Tested-by: Amit Pundir amit.pundir@linaro.org CC: stable@vger.kernel.org # v6.1.y
Fixes: 1dc3459009c3 ("ASoC: codecs: lpass: register mclk after runtime pm") Reported-by: Amit Pundir amit.pundir@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
Sorry for noise, resending this one, as I missed the asoc mailing list in my previous send.
sound/soc/codecs/lpass-rx-macro.c | 4 ++-- sound/soc/codecs/lpass-tx-macro.c | 4 ++-- sound/soc/codecs/lpass-wsa-macro.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index 9e0a4e8a46c3..372bea8b3525 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -3668,9 +3668,9 @@ static int __maybe_unused rx_macro_runtime_suspend(struct device *dev) regcache_cache_only(rx->regmap, true); regcache_mark_dirty(rx->regmap);
clk_disable_unprepare(rx->mclk);clk_disable_unprepare(rx->npl); clk_disable_unprepare(rx->fsgen);
clk_disable_unprepare(rx->npl);clk_disable_unprepare(rx->mclk); return 0;} diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index b044c9c6f89b..d9318799f6b7 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -2096,9 +2096,9 @@ static int __maybe_unused tx_macro_runtime_suspend(struct device *dev) regcache_cache_only(tx->regmap, true); regcache_mark_dirty(tx->regmap);
clk_disable_unprepare(tx->mclk);clk_disable_unprepare(tx->npl); clk_disable_unprepare(tx->fsgen);
clk_disable_unprepare(tx->npl);clk_disable_unprepare(tx->mclk); return 0;} diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index 728f26d12ab0..6484c335bd5d 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -2504,9 +2504,9 @@ static int __maybe_unused wsa_macro_runtime_suspend(struct device *dev) regcache_cache_only(wsa->regmap, true); regcache_mark_dirty(wsa->regmap);
clk_disable_unprepare(wsa->mclk);clk_disable_unprepare(wsa->npl); clk_disable_unprepare(wsa->fsgen);
clk_disable_unprepare(wsa->npl);clk_disable_unprepare(wsa->mclk); return 0;}
2.21.0
On Thu, 23 Mar 2023 11:01:25 +0000, Srinivas Kandagatla wrote:
The order in which clocks are stopped matters as some of the clock like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error: qcom_q6v5_pas 17300000.remoteproc: fatal error received: ABT_dal.c:278:ABTimeout: AHB Bus hang is detected, Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: codecs: lpass: fix the order or clks turn off during suspend commit: a4a3203426f4b67535d6442ddc5dca8878a0678f
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Amit Pundir -
Mark Brown -
Srinivas Kandagatla