Adds register and bit shift definitions in header file. Changes are for TLV320AIC310x based on data sheet. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> --- sound/soc/codecs/tlv320aic3x.h | 19 ++++++++++++++++++- 1 files changed, 18 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h index 06a1978..586c5d5 100644 --- a/sound/soc/codecs/tlv320aic3x.h +++ b/sound/soc/codecs/tlv320aic3x.h @@ -13,7 +13,7 @@ #define _AIC3X_H /* AIC3X register space */ -#define AIC3X_CACHEREGNUM 103 +#define AIC3X_CACHEREGNUM 110 /* Page select register */ #define AIC3X_PAGE_SELECT 0 @@ -74,6 +74,8 @@ #define HPLCOM_CFG 37 /* Right High Power Output control registers */ #define HPRCOM_CFG 38 +/* High Power Output Stage Control Register */ +#define HPOUT_SC 40 /* DAC Output Switching control registers */ #define DAC_LINE_MUX 41 /* High Power Output Driver Pop Reduction registers */ @@ -148,6 +150,17 @@ #define AIC3X_GPIOB_REG 101 /* Clock generation control register */ #define AIC3X_CLKGEN_CTRL_REG 102 +/* New AGC registers */ +#define LAGCN_ATTACK 103 +#define LAGCN_DECAY 104 +#define RAGCN_ATTACK 105 +#define RAGCN_DECAY 106 +/* New Programmable ADC Digital Path and I2C Bus Condition Register */ +#define NEW_ADC_DIGITALPATH 107 +/* Passive Analog Signal Bypass Selection During Powerdown Register */ +#define PASSIVE_BYPASS 108 +/* DAC Quiescent Current Adjustment Register */ +#define DAC_ICC_ADJ 109 /* Page select register bits */ #define PAGE0_SELECT 0 @@ -163,6 +176,10 @@ #define DUAL_RATE_MODE ((1 << 5) | (1 << 6)) #define LDAC2LCH (0x1 << 3) #define RDAC2RCH (0x1 << 1) +#define LDAC2RCH (0x2 << 3) +#define RDAC2LCH (0x2 << 1) +#define LDAC2MONOMIX (0x3 << 3) +#define RDAC2MONOMIX (0x3 << 1) /* PLL registers bitfields */ #define PLLP_SHIFT 0 -- 1.7.7