Add dapm switch in playback path to mute or unmute HP output data. We will set and reset MUTE_SFT bit in RT5682S_HP_CTRL_1 register based on switch value to mute or unmute respective channel.

Signed-off-by: Ajit Kumar Pandey AjitKumar.Pandey@amd.com --- sound/soc/codecs/rt5682s.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index d49a4f68566d..21ab5f7df422 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -1573,6 +1573,14 @@ static const char * const rt5682s_adcdat_pin_select[] = { "ADCDAT1", "ADCDAT2", };

+/* Out Switch */ +static const struct snd_kcontrol_new hpol_switch = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1, + RT5682S_L_MUTE_SFT, 1, 1); +static const struct snd_kcontrol_new hpor_switch = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1, + RT5682S_R_MUTE_SFT, 1, 1); + static SOC_VALUE_ENUM_SINGLE_DECL(rt5682s_adcdat_pin_enum, RT5682S_GPIO_CTRL_1, RT5682S_GP4_PIN_SFT, RT5682S_GP4_PIN_MASK, rt5682s_adcdat_pin_select, rt5682s_adcdat_pin_values); @@ -1746,6 +1754,11 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = { SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5682s_hp_amp_event, SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_POST_PMU),

+ SND_SOC_DAPM_SWITCH("HPOL Playback", SND_SOC_NOPM, 0, 0, + &hpol_switch), + SND_SOC_DAPM_SWITCH("HPOR Playback", SND_SOC_NOPM, 0, 0, + &hpor_switch), + /* CLK DET */ SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682S_CLK_DET, RT5682S_SYS_CLK_DET_SFT, 0, NULL, 0), @@ -1895,8 +1908,10 @@ static const struct snd_soc_dapm_route rt5682s_dapm_routes[] = { {"HP Amp", NULL, "CLKDET SYS"}, {"HP Amp", NULL, "SAR"},

- {"HPOL", NULL, "HP Amp"}, - {"HPOR", NULL, "HP Amp"}, + {"HPOL Playback", "Switch", "HP Amp"}, + {"HPOR Playback", "Switch", "HP Amp"}, + {"HPOL", NULL, "HPOL Playback"}, + {"HPOR", NULL, "HPOR Playback"}, };

static int rt5682s_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,