[alsa-devel] Hda-intel: AC_VERB_SET_PIN_WIDGET_CONTROL appears to do nothing for HDMI device
This is on 1.0.16. Forgive me if I appear clueless, I have only been working on this for the past few hours.
In an attempt to get HDMI audio working on the AppleTV, I have added this line to the presets in patch_atihdmi.c:
{ .id = 0x10951390, .name = "SI1390 HDMI", .patch = patch_atihdmi },
The device is detected fine:
ben@mythfrontend:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC882 Analog [ALC882 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC882 Digital [ALC882 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ben@mythfrontend:~$
and I can send audio to the device, but it doesn't work. I presume this because this is doing nothing:
static struct hda_verb atihdmi_basic_init[] = { /* enable digital output on pin widget */ { 0x03, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, {} /* terminator */ };
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x02
"Pin-ctls: 0x00:" should be reading "Pin-ctls: 0x40: OUT" should it not? What is wrong?
Thanks
Ben
It appears that on boot, nothing gets set, but if I reload the module it works:
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Copyright GenLevel Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 ben@mythfrontend:~$
The unmuting looks like it's working too (Amp-Out vals: [0x00 0x00]). I'm still not getting any sound though - my amp just says "Detecting...".
Is the GPIO line significant? As far as I can tell from the docs, that just means there are no GPIOs.
Ben
On 9 Mar 2008, at 00:10, Ben Firshman wrote:
This is on 1.0.16. Forgive me if I appear clueless, I have only been working on this for the past few hours.
In an attempt to get HDMI audio working on the AppleTV, I have added this line to the presets in patch_atihdmi.c:
{ .id = 0x10951390, .name = "SI1390 HDMI", .patch = patch_atihdmi },
The device is detected fine:
ben@mythfrontend:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC882 Analog [ALC882 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC882 Digital [ALC882 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ben@mythfrontend:~$
and I can send audio to the device, but it doesn't work. I presume this because this is doing nothing:
static struct hda_verb atihdmi_basic_init[] = { /* enable digital output on pin widget */ { 0x03, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, {} /* terminator */ };
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x02
"Pin-ctls: 0x00:" should be reading "Pin-ctls: 0x40: OUT" should it not? What is wrong?
Thanks
Ben
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Sun, 9 Mar 2008 13:05:39 +0000, Ben Firshman wrote:
It appears that on boot, nothing gets set, but if I reload the module it works:
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Copyright GenLevel Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 ben@mythfrontend:~$
The unmuting looks like it's working too (Amp-Out vals: [0x00 0x00]). I'm still not getting any sound though - my amp just says "Detecting...".
Is the GPIO line significant? As far as I can tell from the docs, that just means there are no GPIOs.
I don't think it's GPIO. Which graphic chip is on AppleTV? if it's Nvidia, we have little chance. But, if it's an Intel on-board, it might work. Some people reported HDMI works in a certain level (not perfectly at all though).
Anyway, you can try my latest tree available at git.kernel.org git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-unstable-2.6.git and git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build-unstable.git
The former is the kernel tree and the latter is alsa-driver build tree. Run utils/setup-alsa-kernel KERNEL_DIR on alsa-driver tree to set up the build with sound-unstable kernel git tree (see INSTALL for details).
The ready-to-be-built snapshot tarball is available at http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
Takashi
Ben
On 9 Mar 2008, at 00:10, Ben Firshman wrote:
This is on 1.0.16. Forgive me if I appear clueless, I have only been working on this for the past few hours.
In an attempt to get HDMI audio working on the AppleTV, I have added this line to the presets in patch_atihdmi.c:
{ .id = 0x10951390, .name = "SI1390 HDMI", .patch = patch_atihdmi },
The device is detected fine:
ben@mythfrontend:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC882 Analog [ALC882 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC882 Digital [ALC882 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ben@mythfrontend:~$
and I can send audio to the device, but it doesn't work. I presume this because this is doing nothing:
static struct hda_verb atihdmi_basic_init[] = { /* enable digital output on pin widget */ { 0x03, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, {} /* terminator */ };
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x02
"Pin-ctls: 0x00:" should be reading "Pin-ctls: 0x40: OUT" should it not? What is wrong?
Thanks
Ben
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
On 12 Mar 2008, at 18:20, Takashi Iwai wrote:
At Sun, 9 Mar 2008 13:05:39 +0000, Ben Firshman wrote:
It appears that on boot, nothing gets set, but if I reload the module it works:
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Copyright GenLevel Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 ben@mythfrontend:~$
The unmuting looks like it's working too (Amp-Out vals: [0x00 0x00]). I'm still not getting any sound though - my amp just says "Detecting...".
Is the GPIO line significant? As far as I can tell from the docs, that just means there are no GPIOs.
I don't think it's GPIO. Which graphic chip is on AppleTV? if it's Nvidia, we have little chance. But, if it's an Intel on-board, it might work. Some people reported HDMI works in a certain level (not perfectly at all though).
Anyway, you can try my latest tree available at git.kernel.org git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound- unstable-2.6.git and git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver- build-unstable.git
The former is the kernel tree and the latter is alsa-driver build tree. Run utils/setup-alsa-kernel KERNEL_DIR on alsa-driver tree to set up the build with sound-unstable kernel git tree (see INSTALL for details).
The ready-to-be-built snapshot tarball is available at http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
Yeah, it's a Nvidia chip:
http://wiki.awkwardtv.org/wiki/Parts
Why do you have little chance then? Surely the Nvidia chip is independent of the HDMI chip, which is in turn independent of the sound card? Video out over HDMI works fine with the nv binary drivers you see.
Ben
At Wed, 12 Mar 2008 18:40:23 +0000, Ben Firshman wrote:
On 12 Mar 2008, at 18:20, Takashi Iwai wrote:
At Sun, 9 Mar 2008 13:05:39 +0000, Ben Firshman wrote:
It appears that on boot, nothing gets set, but if I reload the module it works:
ben@mythfrontend:~$ cat /proc/asound/card0/codec#1 Codec: Generic 1095 SI1390 HDMI Address: 1 Vendor Id: 0x10951390 Subsystem Id: 0xffffffff Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Copyright GenLevel Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0894: OUT Detect R/L Pin Default 0x98460010: [Fixed] SPDIF Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 ben@mythfrontend:~$
The unmuting looks like it's working too (Amp-Out vals: [0x00 0x00]). I'm still not getting any sound though - my amp just says "Detecting...".
Is the GPIO line significant? As far as I can tell from the docs, that just means there are no GPIOs.
I don't think it's GPIO. Which graphic chip is on AppleTV? if it's Nvidia, we have little chance. But, if it's an Intel on-board, it might work. Some people reported HDMI works in a certain level (not perfectly at all though).
Anyway, you can try my latest tree available at git.kernel.org git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound- unstable-2.6.git and git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver- build-unstable.git
The former is the kernel tree and the latter is alsa-driver build tree. Run utils/setup-alsa-kernel KERNEL_DIR on alsa-driver tree to set up the build with sound-unstable kernel git tree (see INSTALL for details).
The ready-to-be-built snapshot tarball is available at http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
Yeah, it's a Nvidia chip:
http://wiki.awkwardtv.org/wiki/Parts
Why do you have little chance then? Surely the Nvidia chip is independent of the HDMI chip, which is in turn independent of the sound card?
The HDMI audio output depends on the video driver in many cases actually because of its nature. But, this isn't no certain fact for all cases. It might work in your case. That's why I wrote "little" chance, not "no" chance. So, still it'd be worth to try my patchset.
(The "little" chance implies that you'll likely get no answer from Apple for your inquiry about the hardware details :)
Takashi
participants (2)
-
Ben Firshman -
Takashi Iwai