[PATCH] ASoC: da7219: Add Jack insertion detection polarity selection
Add the selection of DA7219 Jack insertion detection polarity - Default polarity (Low) - Inverted polarity (High)
Signed-off-by: David Rau David.Rau.opensource@dm.renesas.com --- sound/soc/codecs/Kconfig | 24 +++++++++++++++++++++++- sound/soc/codecs/da7219-aad.c | 16 ++++++++++++++++ 2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 79d2362ad055..96f934ad52e7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -967,9 +967,31 @@ config SND_SOC_DA7218 depends on I2C
config SND_SOC_DA7219 - tristate + tristate "Dialog DA7219 CODEC" depends on I2C
+if SND_SOC_DA7219 + +choice + bool "DA7219 Jack insertion detection polarity selection" + default DA7219_DEFAULT_JACK_INSERTION_POLARITY if (SND_SOC_DA7219) + +config DA7219_DEFAULT_JACK_INSERTION_POLARITY + bool "Default polarity" + depends on SND_SOC_DA7219 + help + Select this option if your DA7219 codec with default Jack insertion detection polarity (Low). + +config DA7219_INVERTED_JACK_INSERTION_POLARITY + bool "Inverted polarity" + depends on SND_SOC_DA7219 + help + Select this option if your DA7219 codec with inverted Jack insertion detection polarity (High). + +endchoice + +endif # SND_SOC_DA7219 + config SND_SOC_DA732X tristate depends on I2C diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 993a0d00bc48..9d16112cff6b 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -879,6 +879,18 @@ static void da7219_aad_handle_gnd_switch_time(struct snd_soc_component *componen } }
+static void da7219_aad_handle_polarity(struct snd_soc_component *component) +{ + snd_soc_component_write(component, 0xF0, 0x8B); + + if (IS_ENABLED(CONFIG_DA7219_DEFAULT_JACK_INSERTION_POLARITY)) + snd_soc_component_write(component, 0x75, 0x80); + else if (IS_ENABLED(CONFIG_DA7219_INVERTED_JACK_INSERTION_POLARITY)) + snd_soc_component_write(component, 0x75, 0x00); + + snd_soc_component_write(component, 0xF0, 0x00); +} + /* * Suspend/Resume */ @@ -955,8 +967,12 @@ int da7219_aad_init(struct snd_soc_component *component) snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1, DA7219_BUTTON_CONFIG_MASK, 0);
+ /* Handle the default ground switch delay time */ da7219_aad_handle_gnd_switch_time(component);
+ /* Handle the Jack insertion detection polarity */ + da7219_aad_handle_polarity(component); + da7219_aad->aad_wq = create_singlethread_workqueue("da7219-aad"); if (!da7219_aad->aad_wq) { dev_err(component->dev, "Failed to create aad workqueue\n");
-----Original Message----- From: Mark Brown broonie@kernel.org Sent: Thursday, May 4, 2023 21:39 To: David.Rau.opensource David.Rau.opensource@dm.renesas.com Cc: support.opensource@diasemi.com; lgirdwood@gmail.com; perex@perex.cz; tiwai@suse.com; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org Subject: Re: [PATCH] ASoC: da7219: Add Jack insertion detection polarity selection
On Thu, May 04, 2023 at 08:22:18AM +0000, David Rau wrote:
I would expect these things to be fixed for a given board and therefore configured with a DT property rather than a kernel config. It should be possible to use the same kernel on multiple boards.
Thanks for the kind suggestion. Now I am working on another implementation that retrieve DT data for multiple boards like you said.
participants (3)
-
David Rau
-
David.Rau.opensource
-
Mark Brown