[alsa-devel] [RESEND][PATCH] ASoC: Intel: Power down links before turning off display audio power
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state.
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Sanyog Kale sanyog.r.kale@intel.com --- sound/soc/codecs/hdac_hdmi.c | 12 +++++------- sound/soc/intel/skylake/skl.c | 11 ++++++----- 2 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 0cdceca2b216..c98c4c2babc9 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2235,12 +2235,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) */ snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(bus->dev, "Cannot turn on display power on i915\n"); - return err; - } - hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev)); if (!hlink) { dev_err(dev, "hdac link not found\n"); @@ -2249,7 +2243,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
snd_hdac_ext_bus_link_put(ebus, hlink);
- return 0; + err = snd_hdac_display_power(bus, false); + if (err < 0) + dev_err(bus->dev, "Cannot turn off display power on i915\n"); + + return err; }
static int hdac_hdmi_runtime_resume(struct device *dev) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 670ff9aaca55..c62e474717ff 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -762,6 +762,12 @@ static void skl_probe_work(struct work_struct *work) } }
+ /* + * we are done probing so decrement link counts + */ + list_for_each_entry(hlink, &ebus->hlink_list, list) + snd_hdac_ext_bus_link_put(ebus, hlink); + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { err = snd_hdac_display_power(bus, false); if (err < 0) { @@ -771,11 +777,6 @@ static void skl_probe_work(struct work_struct *work) } }
- /* - * we are done probing so decrement link counts - */ - list_for_each_entry(hlink, &ebus->hlink_list, list) - snd_hdac_ext_bus_link_put(ebus, hlink);
/* configure PM */ pm_runtime_put_noidle(bus->dev);
On Mon, Jul 23, 2018 at 06:32:11PM +0530, Sriram Periyasamy wrote:
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state.
Pierre?
participants (2)
-
Mark Brown
-
Sriram Periyasamy