[alsa-devel] [PATCH] sscape: add supoort for SPEA Media FX/Reveal SC-600
From: Krzysztof Helt krzysztof.h1@wp.pl
Move code from the OSS sscape driver in order to support old Soundscape OEM models.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- Only PCM works.
sound/isa/Kconfig | 6 ++- sound/isa/sscape.c | 116 ++++++++++++++++++++++++++++++++++++--------------- 2 files changed, 86 insertions(+), 36 deletions(-)
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 51a7e37..b90fc16 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -377,10 +377,12 @@ config SND_SSCAPE select SND_WSS_LIB help Say Y here to include support for Ensoniq SoundScape - soundcards. + and Ensoniq OEM soundcards.
The PCM audio is supported on SoundScape Classic, Elite, PnP - and VIVO cards. The MIDI support is very experimental. + and VIVO cards. The supported OEM cards are SPEA Media FX and + Reveal SC-600. + The MIDI support is very experimental.
To compile this driver as a module, choose M here: the module will be called snd-sscape. diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 6618712..b11c35f 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -127,7 +127,8 @@ enum GA_REG {
enum card_type { - SSCAPE, + MEDIA_FX, /* Sequoia S-1000 */ + SSCAPE, /* Sequoia S-2000 */ SSCAPE_PNP, SSCAPE_VIVO, }; @@ -784,20 +785,25 @@ static struct snd_kcontrol_new midi_mixer_ctl = { * These IRQs are encoded as bit patterns so that they can be * written to the control registers. */ -static unsigned __devinit get_irq_config(int irq) +static unsigned __devinit get_irq_config(int sscape_type, int irq) { static const int valid_irq[] = { 9, 5, 7, 10 }; + static const int old_irq[] = { 9, 7, 5, 15 }; unsigned cfg;
- for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) { - if (irq == valid_irq[cfg]) - return cfg; - } /* for */ + if (sscape_type == MEDIA_FX) { + for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg) + if (irq == old_irq[cfg]) + return cfg; + } else { + for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) + if (irq == valid_irq[cfg]) + return cfg; + }
return INVALID_IRQ; }
- /* * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. @@ -842,11 +848,39 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e) goto _done;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); + if (s->ic_type == IC_OPUS) + activate_ad1845_unsafe(s->io_base);
if (s->type == SSCAPE_VIVO) wss_io += 4; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); + + /* wait for WSS codec */ + for (d = 0; d < 500; d++) { + if ((inb(wss_io) & 0x80) == 0) + break; + spin_unlock_irqrestore(&s->lock, flags); + msleep(1); + spin_lock_irqsave(&s->lock, flags); + } + snd_printd(KERN_INFO "init delay = %d ms\n", d); + + if ((inb(wss_io) & 0x80) != 0) + goto _done; + + if (inb(wss_io + 2) == 0xff) + goto _done; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d); + + if ((inb(wss_io) & 0x80) != 0) + s->type = MEDIA_FX; + + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); /* wait for WSS codec */ for (d = 0; d < 500; d++) { if ((inb(wss_io) & 0x80) == 0) @@ -954,9 +988,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, if (sscape->type == SSCAPE_VIVO) port += 4;
- if (dma1 == dma2) - dma2 = -1; - err = snd_wss_create(card, port, -1, irq, dma1, dma2, WSS_HW_DETECT, WSS_HWSHARE_DMA1, &chip); if (!err) { @@ -1051,21 +1082,7 @@ static int __devinit create_sscape(int dev, struct snd_card *card) struct resource *wss_res; unsigned long flags; int err; - - /* - * Check that the user didn't pass us garbage data ... - */ - irq_cfg = get_irq_config(irq[dev]); - if (irq_cfg == INVALID_IRQ) { - snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]); - return -ENXIO; - } - - mpu_irq_cfg = get_irq_config(mpu_irq[dev]); - if (mpu_irq_cfg == INVALID_IRQ) { - printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); - return -ENXIO; - } + const char *name;
/* * Grab IO ports that we will need to probe so that we @@ -1109,8 +1126,41 @@ static int __devinit create_sscape(int dev, struct snd_card *card) goto _release_dma; }
- printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n", - sscape->io_base, irq[dev], dma[dev]); + switch (sscape->type) { + case MEDIA_FX: + name = "MediaFX/SoundFX"; + break; + case SSCAPE: + name = "Soundscape"; + break; + case SSCAPE_PNP: + name = "Soundscape PnP"; + break; + case SSCAPE_VIVO: + name = "Soundscape VIVO"; + break; + default: + name = "unknown Soundscape"; + break; + } + + printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n", + name, sscape->io_base, irq[dev], dma[dev]); + + /* + * Check that the user didn't pass us garbage data ... + */ + irq_cfg = get_irq_config(sscape->type, irq[dev]); + if (irq_cfg == INVALID_IRQ) { + snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]); + return -ENXIO; + } + + mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]); + if (mpu_irq_cfg == INVALID_IRQ) { + printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); + return -ENXIO; + }
if (sscape->type != SSCAPE_VIVO) { /* @@ -1141,8 +1191,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) */ spin_lock_irqsave(&sscape->lock, flags);
- activate_ad1845_unsafe(sscape->io_base); - sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); @@ -1151,12 +1199,12 @@ static int __devinit create_sscape(int dev, struct snd_card *card) * Enable and configure the DMA channels ... */ sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50); - dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40); + dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70); sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg); sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
- sscape_write_unsafe(sscape->io_base, - GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg); + mpu_irq_cfg |= mpu_irq_cfg << 2; + sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg); sscape_write_unsafe(sscape->io_base, GA_CDCFG_REG, 0x09 | DMA_8BIT | (dma[dev] << 4) | (irq_cfg << 1));
At Sun, 27 Sep 2009 23:08:40 +0200, Krzysztof Helt wrote:
From: Krzysztof Helt krzysztof.h1@wp.pl
Move code from the OSS sscape driver in order to support old Soundscape OEM models.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl
Only PCM works.
OK, applied now.
Thanks,
Takashi
participants (2)
-
Krzysztof Helt
-
Takashi Iwai