Hi,

This is a headset i.e. with both a ear set, and a microphone - the playback seems fine, but recording only accept one setting - and also I was having problem with zoom using it ("cannot get freq" see the tail end of this e-mail). switching via the gnome setting -> sound (from built-in hda) seems sluggish, and occasionally the volume is frozen to mute and unresponsive to unmute.

$ arecord -f S16_LE -D front:CARD=J20,DEV=0 -d 10 wonder.wav Recording WAVE 'wonder.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono Warning: rate is not accurate (requested = 8000Hz, got = 16000Hz) please, try the plug plugin

and, also zoom seems to have problem getting at the microphone. I read that it is something to do with rate querying?

Attached is "lsusb -vvvv -d 0b0e:0301 > usb-audio-lsusb-vvvv-0b0e:0301".

I have tried just letting udev doing its thing, or preloading the module with with modprobe snd_usb_audio quirk_alias=0b0e0301:0b0e0349 or modprobe snd_usb_audio quirk_alias=0b0e0301:0b0e030b as below. But the "cannot get freq" message stays.

This is based on similar vendor ids -

sound/usb/format.c: if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) { sound/usb/quirks.c: chip->usb_id == USB_ID(0x0b0e, 0x0349) ||

The device does not seems to be under quirks.c:snd_usb_ctl_msg_quirk() ( I don't really get delays, I think),

format.c:formatparse_audio_format_rates_v1() seems to be somewhat related, but I don't have issue with playback, just capture.

Should I insert this vid/pid into bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) as suggested elsewhere? I am just uncomfortable doing so as there isn't a quirk for this vendor there, yet. Also, related question: the format rate quirk routine and usb_ctl_msg_quirk routine does not seem to be affected by the alias_quirk list, as far as I understand and read the code?

Here is the dmesg, under plain udev autoprobe, and the two preloads. I hope this is enough info. Please feel free to ask for more. (I also maintain https://github.com/HinTak/sound-usb-dkms/ as part of my previous job, but this device/usage is slightly complicated as I need to sign modified modules due to UEFI ; so I'd rather try something that has a chance of working, then just blindly try any modification)

[25475.773095] usbcore: registered new interface driver snd-usb-audio [25482.559878] usb 2-2: new full-speed USB device number 6 using xhci_hcd [25482.764666] usb 2-2: New USB device found, idVendor=0b0e, idProduct=0301, bcdDevice= 3.00 [25482.764669] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [25482.764671] usb 2-2: Product: Jabra EVOLVE 20 [25482.764672] usb 2-2: Manufacturer: GN Netcom A/S [25482.764674] usb 2-2: SerialNumber: 0001B7518B0E07 [25482.770770] usb 2-2: device (0b0e:0301): applying quirk alias 0b0e:0349 [25482.794845] usb 2-2: 1:1: cannot get freq at ep 0x83 [25482.808838] usb 2-2: 2:1: cannot get freq at ep 0x4 [25483.133618] input: GN Netcom A/S Jabra EVOLVE 20 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.3/0003:0B0E:0301.0004/input/input16 [25483.187155] jabra 0003:0B0E:0301.0004: input,hiddev96,hidraw0: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20] on usb-0000:00:10.0-2/input3 [25483.444718] usb 2-2: 2:1: cannot get freq at ep 0x4

[25865.406518] usb 2-2: USB disconnect, device number 6 [25883.242957] usbcore: deregistering interface driver snd-usb-audio [25895.379533] usb 2-2: new full-speed USB device number 7 using xhci_hcd [25895.584862] usb 2-2: New USB device found, idVendor=0b0e, idProduct=0301, bcdDevice= 3.00 [25895.584868] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [25895.584871] usb 2-2: Product: Jabra EVOLVE 20 [25895.584874] usb 2-2: Manufacturer: GN Netcom A/S [25895.584876] usb 2-2: SerialNumber: 0001B7518B0E07 [25895.640239] input: GN Netcom A/S Jabra EVOLVE 20 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.3/0003:0B0E:0301.0005/input/input17 [25895.692123] jabra 0003:0B0E:0301.0005: input,hiddev96,hidraw0: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20] on usb-0000:00:10.0-2/input3 [25895.875421] usb 2-2: 1:1: cannot get freq at ep 0x83 [25895.885726] usb 2-2: 2:1: cannot get freq at ep 0x4 [25896.060320] usbcore: registered new interface driver snd-usb-audio [25896.149752] usb 2-2: 2:1: cannot get freq at ep 0x4 [25899.451644] usb 2-2: USB disconnect, device number 7

[25919.315839] usbcore: registered new interface driver snd-usb-audio [25924.595119] usb 2-2: new full-speed USB device number 8 using xhci_hcd [25924.797720] usb 2-2: New USB device found, idVendor=0b0e, idProduct=0301, bcdDevice= 3.00 [25924.797722] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [25924.797724] usb 2-2: Product: Jabra EVOLVE 20 [25924.797725] usb 2-2: Manufacturer: GN Netcom A/S [25924.797726] usb 2-2: SerialNumber: 0001B7518B0E07 [25924.802782] usb 2-2: device (0b0e:0301): applying quirk alias 0b0e:030b [25924.822715] usb 2-2: 1:1: cannot get freq at ep 0x83 [25924.832718] usb 2-2: 2:1: cannot get freq at ep 0x4 [25925.052655] input: GN Netcom A/S Jabra EVOLVE 20 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.3/0003:0B0E:0301.0006/input/input18 [25925.104757] jabra 0003:0B0E:0301.0006: input,hiddev96,hidraw0: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20] on usb-0000:00:10.0-2/input3 [25925.338094] usb 2-2: 2:1: cannot get freq at ep 0x4 [26253.731814] usb 2-2: USB disconnect, device number 8