Fix the write to PMBR1 register through I2C. Also, the constant which holds the value to write is now called TWL4030_GPIO6_PWM0_MUTE. This name is based on TRM to avoid confusion.

Signed-off-by: Jorge Eduardo Candelaria x0107209@ti.com --- sound/soc/omap/sdp3430.c | 15 +++++++++++---- 1 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index f7e5b74..2eb1a69 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -40,8 +40,10 @@ #include "omap-pcm.h" #include "../codecs/twl4030.h"

-#define TWL4030_INTBR_PMBR1 0x0D -#define EXTMUTE(value) (value << 2) +/* TWL4030 PMBR1 Register */ +#define TWL4030_INTBR_PMBR1 0x0D +/* TWL4030 PMBR1 Register GPIO6 mux bit */ +#define TWL4030_GPIO6_PWM0_MUTE(value) (value << 2)

static struct snd_soc_card snd_soc_sdp3430;

@@ -299,6 +301,7 @@ static struct platform_device *sdp3430_snd_device; static int __init sdp3430_soc_init(void) { int ret; + u8 pin_mux;

if (!machine_is_omap_3430sdp()) { pr_debug("Not SDP3430!\n"); @@ -318,8 +321,12 @@ static int __init sdp3430_soc_init(void) *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */

/* Set TWL4030 GPIO6 as EXTMUTE signal */ - twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, EXTMUTE(0x02), - TWL4030_MODULE_INTBR); + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, &pin_mux, + TWL4030_INTBR_PMBR1); + pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x3); + pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x2); + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, + TWL4030_INTBR_PMBR1);

ret = platform_device_add(sdp3430_snd_device); if (ret)