From: Simon Trimmer simont@opensource.cirrus.com

Ignore failure to read from the cs35l56 when polling as the device will NAK i2c accesses until it has booted and this would terminate the poll of regmap_read_poll_timeout().

Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Signed-off-by: Simon Trimmer simont@opensource.cirrus.com Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com --- sound/soc/codecs/cs35l56-shared.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index ae373f335ea8..98b1e63360ae 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -243,26 +243,27 @@ int cs35l56_wait_for_firmware_boot(struct cs35l56_base *cs35l56_base) { unsigned int reg; unsigned int val; - int ret; + int read_ret, poll_ret;

if (cs35l56_base->rev < CS35L56_REVID_B0) reg = CS35L56_DSP1_HALO_STATE_A1; else reg = CS35L56_DSP1_HALO_STATE;

- ret = regmap_read_poll_timeout(cs35l56_base->regmap, reg, - val, - (val < 0xFFFF) && (val >= CS35L56_HALO_STATE_BOOT_DONE), - CS35L56_HALO_STATE_POLL_US, - CS35L56_HALO_STATE_TIMEOUT_US); + /* + * This can't be a regmap_read_poll_timeout() because cs35l56 will NAK + * I2C until it has booted which would terminate the poll + */ + poll_ret = read_poll_timeout(regmap_read, read_ret, + (val < 0xFFFF) && (val >= CS35L56_HALO_STATE_BOOT_DONE), + CS35L56_HALO_STATE_POLL_US, + CS35L56_HALO_STATE_TIMEOUT_US, + false, + cs35l56_base->regmap, reg, &val);

- if ((ret < 0) && (ret != -ETIMEDOUT)) { - dev_err(cs35l56_base->dev, "Failed to read HALO_STATE: %d\n", ret); - return ret; - } - - if ((ret == -ETIMEDOUT) || (val != CS35L56_HALO_STATE_BOOT_DONE)) { - dev_err(cs35l56_base->dev, "Firmware boot fail: HALO_STATE=%#x\n", val); + if (poll_ret) { + dev_err(cs35l56_base->dev, "Firmware boot timed out(%d): HALO_STATE=%#x\n", + read_ret, val); return -EIO; }